Structure et processus dans une « Agence de développement de réseaux locaux de services de santé et de services sociaux » [Document électronique] : des problèmes et un diagnostic?

Ce cas décrit la structure organisationnelle en place dans une régie régionale de la santé et des services sociaux, ainsi que le processus de prise de décision pour un dossier particulier : la mise en oeuvre d'un programme d'interruption volontaire de grossesses dans la région. L'objectif est d'illustrer comment la structure organisationnelle peut influencer (positivement ou négativement) la façon de traiter les dossiers et les résultats qui en découlent. [Auteurs]

Applying recommendations to aligncompetences, methodology and assessment in Telematics, Computing and Electronic Engineering courses

The alignment between competences, teaching-learning methodologies and assessment is a key element of the European Higher Education Area. This paper presents the efforts carried out by six Telematics, Computer Science and Electronic Engineering Education teachers towards achieving this alignment in their subjects. In a joint work with pedagogues, a set of recommended actions were identified. A selection of these actions were applied and evaluated in the six subjects. The cross-analysis of the results indicate that the actions allow students to better understand the methodologies and assessment planned for the subjects, facilitate (self-) regulation and increase students’ involvement in the subjects.

The role of the Teaching Quality and Innovation Support Unit in the ICT Engineering Studies at Universitat Pompeu Fabra

One of the strategies of Universitat Pompeu Fabra to support Quality Learning has been the creation of Units for the Support of Teaching Quality and Innovation within each faculty. In the seminar we will present the role and activities of the Polytechnic School Unit in charge or coordinating the efforts towards quality learning in the Information and Communication Technologies (ICT) Engineering Studies. We will also discuss how these activities are informed to relevant academic stakeholders.

La evaluación como elemento clave de la formación basada en competencias: tres casos en el ámbito de la ingenierías

El Espacio Europeo de Educación Superior implica cambios organizativos y académicos referentes a la formación basada en competencias. El proyecto AlineaME, coordinado por la Unidad de Soporte a la Calidad y la Innovación Docente de la Escuela Superior Politécnica - Universidad Pompeu Fabra, propuso a docentes del área TIC y a pedagogos la reflexión conjunta en aras a diseñar recomendaciones centradas en la alineación entre los tres elementos clave del proyecto: competencias, metodología y evaluación (C*M*E). Este trabajo recoge tres casos de aplicación de recomendaciones, concretamente de Ingeniería Telemática (dos casos - Universidad de Valladolid y Pompeu Fabra) y de Ingeniería Técnica en Informática de Gestión (un caso - Universidad de Sevilla).Las recomendaciones aplicadas hacen referencia a la necesidad de explicitar la alineación C*M*E en los Planes Docentes de Asignaturas y de presentar esta alineación al estudiantado. También a la integración de la evaluación de la asignatura como tarea-proceso de aprendizaje. La metodología seguida para laaplicación de ambas es (salvo pequeñas diferencias) parecida en los tres casos. La primera recomendación consistió en recoger en el Plan Docente la Alineación y en verbalizar dicha alineación en la sesión de presentación de la asignatura. La segunda se incorporó incluyendo actividades formativas en las que se favorecía la evaluación entre iguales. Para evaluar la aplicación de recomendaciones se recogieron evidencias en clave de satisfacción por parte del estudiantado así como valoraciones de los propios docentes. Para ello se diseñaron instrumentos específicos.En cuanto a la presentación de la alineación C*M*E en los Planes Docentes de asignaturas, los resultados indican que los alumnos son más conscientes de qué, cómo y por qué van a trabajar y ser evaluados. Globalmente valoran positivamente su utilidad para la autorregulación. Asimismo, plantear la evaluación como tarea deaprendizaje resultó ser para los estudiantes un interesante elemento de reflexión.

Personalized modeling for drug concentration prediction using Support Vector Machine

Building a personalized model to describe the drug concentration inside the human body for each patient is highly important to the clinical practice and demanding to the modeling tools. Instead of using traditional explicit methods, in this paper we propose a machine learning approach to describe the relation between the drug concentration and patients' features. Machine learning has been largely applied to analyze data in various domains, but it is still new to personalized medicine, especially dose individualization. We focus mainly on the prediction of the drug concentrations as well as the analysis of different features' influence. Models are built based on Support Vector Machine and the prediction results are compared with the traditional analytical models.

Desenvolupament en Moodle d’eines d’autoaprenentatge i avaluació continua en les àrees de Física i Matemàtiques

Aquesta comunicació presenta el projecte Aula de Tests desenvolupat com a suport en el desplegament de les assignatures de física i matemàtiques de primer curs dels estudis d'enginyeria de l’Escola Superior Politècnica de la Universitat Pompeu Fabra. El projecte té com a objectiu dissenyar eines d'auto aprenentatge i d'avaluació contínua accessible on-line a través de l'entorn Moodle per a afavorir el procés d'aprenentatge de l’estudiant. El context d’aquesta experiència es caracteritzaper la inherent dificultat dels estudis d’enginyeria, pel fet que molts estudiants entren a la universitat amb mancances substancials de coneixements en aquestes àrees així com la heterogeneïtat en quant a la formació pre-universitària. S’hi descriuen lescaracterístiques de les activitats programades i el context on s’han aplicat i es presenten els resultats de satisfacció, participació i notes que aporten informació útil al professorat per a adequar la planificació i les activitats els cursos següents.

Diseño, implementación y evaluación de un juego educativo basado en puzles con scaffolding orientado a la programación

Existe una falta de interés por parte de los estudiantes en el área de las Tecnologías de la Información y la Comunicación (TIC) que se ve reflejada en el descenso de las matriculaciones en este ámbito. El uso de metodologías de aprendizaje basadas en el Constructivismo combinadas con tecnología software, se ha observado que es una buena solución para afrontar dicha falta de interés. Sin embargo, actualmente no existen aplicaciones software que implementen estas metodologías pedagógicas y que proporcionen a los estudiantes los mecanismos de ayuda necesarios (Scaffolding) para darles soporte durante el aprendizaje de conceptos TIC. Una posible solución a este problema es el uso de juegos educativos, los cuáles implementarán técnicas de Scaffolding que den el soporte necesario al estudiante para alcanzarlos objetivos de aprendizaje fijados. Por tanto, en este proyecto se diseñará e implementará un juego educativo basado en puzles orientado a la Programación que estará basado en un método aprendizaje basado en el Constructivismo en el que el estudiante construye su propio conocimiento. Una vez implementado, será evaluado en un centro escolar por parte deestudiantes de últimos cursos de ESO o Bachillerato.

Neglected risks, financial innovation, and financial fragility

We present a standard model of financial innovation, in which intermediaries engineer securities with cash flows that investors seek, but modify two assumptions. First, investors (and possibly intermediaries) neglect certain unlikely risks. Second, investors demand securities with safe cash flows. Financial intermediaries cater to these preferences and beliefs by engineering securities perceived to be safe but exposed to neglected risks. Because the risks are neglected, security issuance is excessive. As investors eventually recognize these risks, they fly back to safety of traditional securities and markets become fragile, even without leverage, precisely because the volume of new claims is excessive.

The Impact of Industry Collaboration on Academic Research Output: A Dynamic Panel Data Analysis

The aim of this paper is to analyse the impact of university knowledge and technology transfer activities on academic research output. Specifically, we study whether researchers with collaborative links with the private sector publish less than their peers without such links, once controlling for other sources of heterogeneity. We report findings from a longitudinal dataset on researchers from two engineering departments in the UK between 1985 until 2006. Our results indicate that researchers with industrial links publish significantly more than their peers. Academic productivity, though, is higher for low levels of industry involvement as compared to high levels.

College of Engineering Strategic Plan,2006

College of Engineering at Iowa State University produced a strategic plan for the years 2005-2010.

Three essays in control, entrepreneurship and innovation

One of the key emphases of these three essays is to provide practical managerial insight. However, good practical insight, can only be created by grounding it firmly on theoretical and empirical research. Practical experience-based understanding without theoretical grounding remains tacit and cannot be easily disseminated. Theoretical understanding without links to real life remains sterile. My studies aim to increase the understanding of how radical innovation could be generated at large established firms and how it can have an impact on business performance as most businesses pursue innovation with one prime objective: value creation. My studies focus on large established firms with sales revenue exceeding USD $ 1 billion. Usually large established firms cannot rely on informal ways of management, as these firms tend to be multinational businesses operating with subsidiaries, offices, or production facilities in more than one country. I. Internal and External Determinants of Corporate Venture Capital Investment The goal of this chapter is to focus on CVC as one of the mechanisms available for established firms to source new ideas that can be exploited. We explore the internal and external determinants under which established firms engage in CVC to source new knowledge through investment in startups. We attempt to make scholars and managers aware of the forces that influence CVC activity by providing findings and insights to facilitate the strategic management of CVC. There are research opportunities to further understand the CVC phenomenon. Why do companies engage in CVC? What motivates them to continue "playing the game" and keep their active CVC investment status. The study examines CVC investment activity, and the importance of understanding the influential factors that make a firm decide to engage in CVC. The main question is: How do established firms' CVC programs adapt to changing internal conditions and external environments. Adaptation typically involves learning from exploratory endeavors, which enable companies to transform the ways they compete (Guth & Ginsberg, 1990). Our study extends the current stream of research on CVC. It aims to contribute to the literature by providing an extensive comparison of internal and external determinants leading to CVC investment activity. To our knowledge, this is the first study to examine the influence of internal and external determinants on CVC activity throughout specific expansion and contraction periods determined by structural breaks occurring between 1985 to 2008. Our econometric analysis indicates a strong and significant positive association between CVC activity and R&D, cash flow availability and environmental financial market conditions, as well as a significant negative association between sales growth and the decision to engage into CVC. The analysis of this study reveals that CVC investment is highly volatile, as demonstrated by dramatic fluctuations in CVC investment activity over the past decades. When analyzing the overall cyclical CVC period from 1985 to 2008 the results of our study suggest that CVC activity has a pattern influenced by financial factors such as the level of R&D, free cash flow, lack of sales growth, and external conditions of the economy, with the NASDAQ price index as the most significant variable influencing CVC during this period. II. Contribution of CVC and its Interaction with R&D to Value Creation The second essay takes into account the demands of corporate executives and shareholders regarding business performance and value creation justifications for investments in innovation. Billions of dollars are invested in CVC and R&D. However there is little evidence that CVC and its interaction with R&D create value. Firms operating in dynamic business sectors seek to innovate to create the value demanded by changing market conditions, consumer preferences, and competitive offerings. Consequently, firms operating in such business sectors put a premium on finding new, sustainable and competitive value propositions. CVC and R&D can help them in this challenge. Dushnitsky and Lenox (2006) presented evidence that CVC investment is associated with value creation. However, studies have shown that the most innovative firms do not necessarily benefit from innovation. For instance Oyon (2007) indicated that between 1995 and 2005 the most innovative automotive companies did not obtain adequate rewards for shareholders. The interaction between CVC and R&D has generated much debate in the CVC literature. Some researchers see them as substitutes suggesting that firms have to choose between CVC and R&D (Hellmann, 2002), while others expect them to be complementary (Chesbrough & Tucci, 2004). This study explores the interaction that CVC and R&D have on value creation. This essay examines the impact of CVC and R&D on value creation over sixteen years across six business sectors and different geographical regions. Our findings suggest that the effect of CVC and its interaction with R&D on value creation is positive and significant. In dynamic business sectors technologies rapidly relinquish obsolete, consequently firms operating in such business sectors need to continuously develop new sources of value creation (Eisenhardt & Martin, 2000; Qualls, Olshavsky, & Michaels, 1981). We conclude that in order to impact value creation, firms operating in business sectors such as Engineering & Business Services, and Information Communication & Technology ought to consider CVC as a vital element of their innovation strategy. Moreover, regarding the CVC and R&D interaction effect, our findings suggest that R&D and CVC are complementary to value creation hence firms in certain business sectors can be better off supporting both R&D and CVC simultaneously to increase the probability of generating value creation. III. MCS and Organizational Structures for Radical Innovation Incremental innovation is necessary for continuous improvement but it does not provide a sustainable permanent source of competitiveness (Cooper, 2003). On the other hand, radical innovation pursuing new technologies and new market frontiers can generate new platforms for growth providing firms with competitive advantages and high economic margin rents (Duchesneau et al., 1979; Markides & Geroski, 2005; O'Connor & DeMartino, 2006; Utterback, 1994). Interestingly, not all companies distinguish between incremental and radical innovation, and more importantly firms that manage innovation through a one-sizefits- all process can almost guarantee a sub-optimization of certain systems and resources (Davila et al., 2006). Moreover, we conducted research on the utilization of MCS along with radical innovation and flexible organizational structures as these have been associated with firm growth (Cooper, 2003; Davila & Foster, 2005, 2007; Markides & Geroski, 2005; O'Connor & DeMartino, 2006). Davila et al. (2009) identified research opportunities for innovation management and provided a list of pending issues: How do companies manage the process of radical and incremental innovation? What are the performance measures companies use to manage radical ideas and how do they select them? The fundamental objective of this paper is to address the following research question: What are the processes, MCS, and organizational structures for generating radical innovation? Moreover, in recent years, research on innovation management has been conducted mainly at either the firm level (Birkinshaw, Hamel, & Mol, 2008a) or at the project level examining appropriate management techniques associated with high levels of uncertainty (Burgelman & Sayles, 1988; Dougherty & Heller, 1994; Jelinek & Schoonhoven, 1993; Kanter, North, Bernstein, & Williamson, 1990; Leifer et al., 2000). Therefore, we embarked on a novel process-related research framework to observe the process stages, MCS, and organizational structures that can generate radical innovation. This article is based on a case study at Alcan Engineered Products, a division of a multinational company provider of lightweight material solutions. Our observations suggest that incremental and radical innovation should be managed through different processes, MCS and organizational structures that ought to be activated and adapted contingent to the type of innovation that is being pursued (i.e. incremental or radical innovation). More importantly, we conclude that radical can be generated in a systematic way through enablers such as processes, MCS, and organizational structures. This is in line with the findings of Jelinek and Schoonhoven (1993) and Davila et al. (2006; 2007) who show that innovative firms have institutionalized mechanisms, arguing that radical innovation cannot occur in an organic environment where flexibility and consensus are the main managerial mechanisms. They rather argue that radical innovation requires a clear organizational structure and formal MCS.

Morphostructural analysis of an alpine debris flows catchment: implication for debris supply

Rock slope instabilities are implicitly linked to the supply of sediment and debris recharging channels prone to debris flow. Hence, the incorporation of bedrock structure and terrain morphology can be relevant in the analysis of sediment budget and debris flow hazard assessment. Here, the mode of debris production of the Manival catchment (northern French Alps) is documented by the study of its morphostructural aspects extracted from high resolution DEM. Terrain implication in the process of debris supply is evaluated by: a) A systematic classification of the major morphological units based on the slope gradient that enables a spatial analysis of zones of debris production and deposition. b) A detailed structural analysis performed on DEM in order to identify potential unstable slopes. c) An analysis of the gullies orientation that informs in term of structural control of the sources zones. d) Localisation of high density joints sets that document about whether sources of continuous debris production are controlled by the structural setting of the catchment. These DEM-based indicators can be used as proxies for assessing the influences of the current topography and enable to quantify a degree of susceptibility to mass wasting and hillslope erosion activity. This present contribution suggests some directions for characterizing sediment flux dynamic in small alpine catchment.