Distribution of the root system of peach palm under drip irrigation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Population ecology of the planktonic shrimp lucifer faxoni borradaile, 1915 (crustacea, sergestoidea, luciferidae) of the southeastern coast of brazil

Luciferid shrimps have short life spans and a rapid turnover of generations, engage in sequential spawning, and protect their eggs during incubation. This study investigates the ecology of Lucifer faxoni Borradaile, 1915 in the littoral zone, Ubatuba region, São Paulo. Sampling was conducted monthly from July 2005 to December 2006 using a Renfro net trawled over a distance of 50 m for a total sampling effort of 50 m² at each station. Nine stations were sampled, ranging from 1 to 15 m deep. Three stations each were grouped into zones 1, 2 and 3 (Z1, Z2 and Z3). Monthly values of salinity, temperature and rainfall were recorded at each station. The pre-buccal somite length (SL) of each specimen was measured. The results showed that in shallower zones (Z1 and Z2), 6306 individuals were captured, whereas in the deeper zone (Z3), 3808 specimens were captured, but no significant differences in SL was detected between the specimens from Z1 and Z2 and those from Z3 (ANOVA, p=0.25). The abundance of shrimps did not differ significantly between seasons (Tukey’s test, p=0.02) except in the spring. The sex ratio differed significantly over the seasons (χ², p<0.05). The results were closely associated with environmental factors with respect to the spatial and seasonal distribution of L. faxoni. Rainfall affected salinity directly, and contributed to the displacement of these shrimps to deeper areas.

Effect of veneering material on the deformation suffered by implant-supported fixed prosthesis framework

The aim of this study was to evaluate the deformation suffered by cantilevered implant-supported fixed prostheses frameworks cast in silver-palladium alloy and coated with two occlusal veneering materials: acrylic resin or porcelain. Material and Methods: Two strain gauges were bonded to the inferior surface of the silver-palladium framework and two other were bonded to the occlusal surface of the prosthesis framework covered with ceramic and acrylic resin on each of its two halves. The framework was fixed to a metallic master model and a 35.2 N compression force was applied to the cantilever at 10, 15 and 20 mm from the most distal implant. The measurements of deformation by compression and tension were obtained. The statistical 2-way ANOVA test was used for individual analysis of the experiment variables and the Tukey test was used for the interrelation between all the variables (material and distance of force application). Results: The results showed that both variables had influence on the studied factors (deformation by compression and tension). Conclusion: The ceramic coating provided greater rigidity to the assembly and therefore less distortion compared with the uncoated framework and with the resin-coated framework. The cantilever arm length also influenced the prosthesis rigidity, causing higher deformation the farther the load was applied from the last implant.

As contribuições do uso de infográficos, Storytelling e Mapas Mentais em vídeo na Educação a Distância: exemplo de aplicação na plataforma Já Entendi ENEM

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

O papel das tecnologias digitais em disciplinas de álgebra linear a distância: possibilidades, limites e desafios

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O ensino de física com lousa digital: atividades lúdicas como ferramenta mediadora na aprendizagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Discourse and Cooperative Learning in the Math Classroom

In this action research study of my 6th grade math classroom I investigated the effects of increased student discourse and cooperative learning on the students’ ability to explain and understand math concepts and problem solving, as well as its effects on their use of vocabulary and written explanations. I also investigated how it affected students’ attitudes. I discovered that increased student discourse and cooperative learning resulted in positive changes in students’ attitudes about their ability to explain and understand math, as well as their actual ability to explain and understand math concepts. Evidence in regard to use of vocabulary and written explanations generally showed little change, but this may have been related to insufficient data. As a result of this research, I plan to continue to use cooperative learning groups and increased student discourse as a teaching practice in all of my math classes. I also plan to include training on cooperative learning strategies as well as more emphasis on vocabulary and writing in my math classroom.

Reading as a Learning Strategy for Mathematics

In this action research study of 55 sophomore and junior students in my Algebra II/Trigonometry classrooms, I investigated a reading strategy of learning mathematics. Students were given background information about reading and explored the benefits of reading for themselves. Next, students were taught to read their textbook, analyzing one section of the textbook at a time. Throughout the research project, students were given reading guides to fill out during class with whole class discussion following the reading time. I discovered that students are able to read a mathematics textbook with understanding and students who are gone for activities can learn independently. Teacher observations, student surveys, and student interviews provide quantitative evidence of increased student understanding and achievement. As a result of this research, I plan to continue utilizing the reading guides and incorporating reading as a method of learning mathematics within my classrooms.

Measurement, Simulation, and Analysis of the Mechanical Response of Railroad Track

Increased railroad traffic volumes, speeds, and axle loads have created a need to better measure track quality. Previous research has indicated that the vertical track deflection provides a meaningful indicator of track integrity. The measured deflection can be related to the bending stresses in the rail as well as characterize the mechanical response of the track. This investigation summarizes the simulation, analysis and development of a measurement system at the University of Nebraska (UNL) to measure vertical track deflection in real-time from a car moving at revenue speeds. The UNL system operates continuously over long distances and in revenue service. Using a camera and two line lasers, the system establishes three points of the rail shape beneath the loaded wheels and over a distance of 10 ft. The resulting rail shape can then be related to the actual bending stress in the rail and estimate the track support through beam theory. Finite element simulations are used to characterize the track response as related to the UNL measurement system. The results of field tests using bondable resistance strain gages illustrate the system’s capability of approximating the actual rail bending stresses under load.

Scraping Behavior in Male White-tailed Deer as a Potential Means of Transmitting Chronic Wasting Disease

Chronic wasting disease (CWD) has become a concern for wildlife managers and hunters across the United States. High prevalence of chronic wasting disease (CWD) in older male white-tailed deer (Odocoileus virginianus) suggests that sex-specific social behavior may contribute to the spread of the disease among males. Scraping is a marking behavior performed by male white-tailed deer during the rut in which a pawed depression and associated over-hanging branch are marked with saliva, glandular secretions, urine, and feces. We placed 71 and 35 motion-activated cameras on scrapes in DeSoto National Wildlife Refuge in western Nebraska and eastern Iowa from Oct. – Nov. 2005 and Sept. – Nov. 2006, respectively. We recorded 5009 encounters and 1830 direct interactions. We developed an ethogram of behaviors of interest at scrapes. We found that males interacted with scrapes more frequently than females (P < 0.001). Male interactions were more complex, with 69% consisting of ≥2 observed behaviors versus 25% and 13% for females and fawns. We identified individual male deer ≥2.5 years old and determined the minimum number of different scrapes individuals visited and the number of individuals that visit a single scrape. Individuals that appeared on camera ≥5 times visited a mean of 3.9 scrapes (range = 1-15) and traveled a mean minimum distance of 978 m between consecutive scrapes. A mean of 5.1 individuals visited a single scrape, and up to 43% of individuals returned to a scrape previously visited at least once. We modeled Risk Values based on frequency of occurrence, duration, and Threat Values of each behavior, for contacting and transmitting CWD prions at scrapes. Adult males had the highest total Risk Values for contacting CWD prions (114.1) and shedding prions (59.4). The “grasp-lick branch” behavior had the highest Risk Value for adult males for both contacting and transmitting prions. Our study reveals a sex specific social behavior in male white-tailed deer that has the potential to spread chronic wasting disease between adult males in the population.

O ensino de física com lousa digital: atividades lúdicas como ferramenta mediadora na aprendizagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Improved Measurement of Muon Antineutrino Disappearance in MINOS

We report an improved measurement of (nu) over bar (mu) disappearance over a distance of 735 km using the MINOS detectors and the Fermilab Main Injector neutrino beam in a (nu) over bar (mu)-enhanced configuration. From a total exposure of 2.95 x 10(20) protons on target, of which 42% have not been previously analyzed, we make the most precise measurement of Delta(m) over bar (2) = [2.62(-0.28)(+0.31)(stat) +/- 0.09(syst)] x 10(-3) eV(2) and constrain the (nu) over bar (mu) mixing angle sin(2)(2 (theta) over bar) > 0.75 (90% C.L.). These values are in agreement with Delta m(2) and sin(2)(2 theta) measured for nu(mu), removing the tension reported in [P. Adamson et al. (MINOS), Phys. Rev. Lett. 107, 021801 (2011).].

POPULATION DENSITY OF THE HELMETED CURASSOW (PAUXI PAUXI) IN TAMA NATIONAL PARK, COLOMBIA

We estimated the population density of the Helmeted Curassow (Pauxi pauxi) in Tama National Park (TNP) Colombia, using visual counts between December 2006 and December 2008. We used six line transects (1 km each) equitably distributed in a natural forest between 800 and 1,200 m asl in the southern part of the park. The sampling effort was 588 hrs with a total distance of 490 km, a detection rate of 0.06 records/hr, and an encounter rate of 0.08 individuals/km. Only solitary individuals were recorded (n = 40); the estimated density was 4.8 individuals/km(2). Most detections occurred in the lower strata of the forest (floor and sub-canopy) where hunters take advantage of curassows in the lower strata for successful harvest. The southern sector of TNP becomes important in the dry season. Our study suggests a large population is in TNP, but harvesting activities including removal of eggs, chicks, and juveniles, and hunting adults are affecting the reproductive rate and population of the species. Received 6 June 2011. Accepted 2 February 2012.

A Note on Large Deviations for the Stable Marriage of Poisson and Lebesgue with Random Appetites

Let IaS,a"e (d) be a set of centers chosen according to a Poisson point process in a"e (d) . Let psi be an allocation of a"e (d) to I in the sense of the Gale-Shapley marriage problem, with the additional feature that every center xi aI has an appetite given by a nonnegative random variable alpha. Generalizing some previous results, we study large deviations for the distance of a typical point xaa"e (d) to its center psi(x)aI, subject to some restrictions on the moments of alpha.

Morphological and Biometric Study of the Infraorbital Foramen (E2-Sibai Point) in Adult Skulls

The objective of this work was to study the morphology and biometry of the infraorbital foramen (FIO), variations in its shape, size and number as well as to obtain measurements of its location. 60 dry skulls were analyzed. The test of Qui-quadrant and the T Test were used in measurements with a 5% significance. On the right side, the FIO was measured at a distance of 6.49(+/- 1.68) mm from the lower, 39.65(+/- 3) mm from the upper, 17.7(+/- 2.97) mm from the medial and 20.46(+/- 2.9) mm from the lateral margin of the orbit; its pear-shaped opening distance was 13.67(+/- 2.17) mm. On the left side, the distance of the FIO to the lower margin of the orbit was 6.52(+/- 1.82) mm; to the upper margin was 39.9(+/- 2.62) mm and to the lateral and medial margin were 17.93(+/- 2.58) mm and 21.12(+/- 3) mm, respectively; its distance to the pear-shaped opening was 14.26(+/- 1.83) mm. It was found predominately in an oval shape, in 39 (65%) of the skulls, on both sides. Accessory foramens were present in 11 samples on the right and in 15 samples on the left side. The FIO was most frequently found on the side of, or laterally to the sagittal plane that passes through the middle of the supraorbital foramen/incisures, in 38 skulls (63.3%) on the right side and in 45 skulls (75%) on the left and middle to the zigomatic-maxillary suture, in 41 skulls (68.3%) on right and in 42 skulls (70%) on the left side, besides being most frequently found in a region between the first and second premolars, in 22 skulls (36.7%) on the right side and in 17 skulls (28.3%) on the left.