Improvement of the mechanical properties of 2124 Al/SiCp MMC plate by optimisation of the solution treatment

Static mechanical properties of 2124 Al/SiCp MMC have been measured as a function of solution temperature and time. An optimum solution treatment has been established which produces significant improvements in static mechanical properties and fatigue crack growth resistance over conventional solution treatments. Increasing the solution treatment parameters up to the optimum values improves the mechanical properties because of intermetallic dissolution, improved solute and GPB zone strengthening and increased matrix dislocation density. Increasing the solution treatment parameters beyond the optimum values results in a rapid reduction in mechanical properties due to the formation of gas porosity and surface blisters. The optimum solution treatment improves tensile properties in the transverse orientation to a greater extent than in the longitudinal orientation and this results in reduced anisotropy. © 1996 Elsevier Science Limited.

Fatigue in SiC-particulate-reinforced aluminium alloy composites

The fatigue behaviour in SiC-particulate-reinforced aluminium alloy composites has been briefly reviewed. The improved fatigue life reported in stress-controlled test results from the higher stiffness of the composites; therefore it is generally inferior to monolithic alloys at a constant strain level. The role of SiC particulate reinforcement has been examined for fatigue crack initiation, short-crack growth and long-crack growth. Crack initiation is observed to occur at matrix-SiC interface in cast composites and either at or near the matrix-SiC interface or at cracked SiC particles in powder metallurgy processed composites depending on particle size and morphology. The da/dN vs ΔK relationship in the composites is characterized by crack growth rates existing within a narrow range of ΔK and this is because of the lower fracture toughness and relatively high threshold values in composites compared with those in monolithic alloys. An enhanced Paris region slope attributed to the monotonic fracture contribution are reported and the extent of this contribution is found to depend on particle size. The effects of the aging condition on crack growth rates and particle size dependence of threshold values are also treated in this paper. © 1991.

Fatigue in metallic alloys containing non-metallic particles

This paper examines the effects of non-metallic particles on fatigue performance and, in particular, their influence on fatigue crack propagation at high ΔK (Kmax) levels. The nature and properties of a number of common non-metallic particles found in Fe- and Al- based alloys are described, and consideration is given to the consequences of mismatch of physical and chemical properties between particle and matrix. Effects of particles on fatigue in conventional alloys are illustrated and compared with the behaviour of Al/SiCp MMC. The problems associated with developing particulate reinforced MMC with adequate fatigue crack growth resistance and toughness for structural applications are discussed. © 1991.

Improved methodology to evaluate fracture properties of warm-mix asphalt using overlay test

This study developed a reliable and repeatable methodology to evaluate the fracture properties of asphalt mixtures with an overlay test (OT). In the proposed methodology, first, a two-step OT protocol was used to characterize the undamaged and damaged behaviors of asphalt mixtures. Second, a new methodology combining the mechanical analysis of viscoelastic force equilibrium in the OT specimen and finite element simulations was used to determine the undamaged properties and crack growth function of asphalt mixtures. Third, a modified Paris's law replacing the stress intensity factor by the pseudo J-integral was employed to characterize the fracture behavior of asphalt mixtures. Theoretical equations were derived to calculate the parameters A and n (defined as the fracture properties) in the modified Paris's law. The study used a detailed example to calculate A and n from the OT data. The proposed methodology was successfully applied to evaluate the impact of warm-mix asphalt (WMA) technologies on fracture properties. The results of the tested specimens showed that Evotherm WMA technology slightly improved the cracking resistance of asphalt mixtures, while foaming WMA technology provided comparable fracture properties. In addition, the study found that A decreased with the increase in n in general. A linear relationship between 2log(A) and n was established.

Lie-szimmetriák egy közgazdasági alkalmazása (An economic application of the Lie symmetries)

Ebben a tanulmányban ismertetjük a Nöther-tétel lényegi vonatkozásait, és kitérünk a Lie-szimmetriák értelmezésére abból a célból, hogy közgazdasági folyamatokra is alkalmazzuk a Lagrange-formalizmuson nyugvó elméletet. A Lie-szimmetriák dinamikai rendszerekre történő feltárása és viselkedésük jellemzése a legújabb kutatások eredményei e területen. Például Sen és Tabor (1990), Edward Lorenz (1963), a komplex kaotikus dinamika vizsgálatában jelent®s szerepet betöltő 3D modelljét, Baumann és Freyberger (1992) a két-dimenziós Lotka-Volterra dinamikai rendszert, és végül Almeida és Moreira (1992) a három-hullám interakciós problémáját vizsgálták a megfelelő Lie-szimmetriák segítségével. Mi most empirikus elemzésre egy közgazdasági dinamikai rendszert választottunk, nevezetesen Goodwin (1967) ciklusmodelljét. Ennek vizsgálatát tűztük ki célul a leírandó rendszer Lie-szimmetriáinak meghatározásán keresztül. / === / The dynamic behavior of a physical system can be frequently described very concisely by the least action principle. In the centre of its mathematical presentation is a specic function of coordinates and velocities, i.e., the Lagrangian. If the integral of the Lagrangian is stationary, then the system is moving along an extremal path through the phase space, and vice versa. It can be seen, that each Lie symmetry of a Lagrangian in general corresponds to a conserved quantity, and the conservation principle is explained by a variational symmetry related to a dynamic or geometrical symmetry. Briey, that is the meaning of Noether's theorem. This paper scrutinizes the substantial characteristics of Noether's theorem, interprets the Lie symmetries by PDE system and calculates the generators (symmetry vectors) on R. H. Goodwin's cyclical economic growth model. At first it will be shown that the Goodwin model also has a Lagrangian structure, therefore Noether's theorem can also be applied here. Then it is proved that the cyclical moving in his model derives from its Lie symmetries, i.e., its dynamic symmetry. All these proofs are based on the investigations of the less complicated Lotka Volterra model and those are extended to Goodwin model, since both models are one-to-one maps of each other. The main achievement of this paper is the following: Noether's theorem is also playing a crucial role in the mechanics of Goodwin model. It also means, that its cyclical moving is optimal. Generalizing this result, we can assert, that all dynamic systems' solutions described by first order nonlinear ODE system are optimal by the least action principle, if they have a Lagrangian.

A fizikai matematika legújabb eredményei mint a közgazdaság-tudomány lehetséges vizsgálati eszközei (The newest results of physical mathematics as the possible investigation tools of economics)

A közgazdaság-tudomány számos problémája a fizika analóg modelljeinek segítségével nyert megoldást. A közgazdászok körében erőteljesen megoszlanak a vélemények, hogy a közgazdasági modellek mennyire redukálhatók a fizika, vagy más természettudományok eredményeire. Vannak,akik pontosan ezzel magyarázzák,hogy a mai mainstream közgazdasági elmélet átalakult alkalmazott matematikává,ami a gazdasági kérdéseket csak a társadalom-tudományi vonatkozásaitól eltekintve képes vizsgálni. Mások, e tanulmányszerzője is, viszont úgy vélekednek, hogy a közgazdasági problémák egy része, ahol lehetőség van a mérésre, jól modellezhetők a természettudományok technikai arzenáljával. A másik része, amelyekben nem lehet mérni,s tipikusan ilyenek a társadalomtudományi kérdések, ott sokkal komplexebb technikákra lesz szükség. Etanulmány célkitűzése, hogy felvázolja a fizika legújabb, az irreverzibilis dinamika, a relativitáselmélet és a kvantummechanika sztochasztikus matematikai összefüggéseit, amelyekből a közgazdászok választhatnak egy-egy probléma megfogalmazásában és megoldásában. Például az időoperátorok pontos értelmezése jelentős fordulatot hozhat a makroökonómiai elméletekben; vagy az eddigi statikus egyensúlyi referencia pontokat felválthatják a dinamikus,időben változó sztochasztikus egyensúlyi referenciafüggvények, ami forradalmian új megvilágításba helyezhet számos társadalomtudományi, s főleg nemegyensúlyi közgazdasági kérdést.A termodinamika és a biológiai evolúció fogalmait és definícióit Paul A. Samuelson (1947) már adaptálta a közgazdaságtanban, viszont a kvantummechanika legújabb eredményeit, az időoperátorokat stb. nem érintette. E cikk azokat a legújabb fizikai, kémiai és biológiai matematikai összefüggéseket foglalja össze,amelyek hasznosak lehetnek a közgazdasági modellek komplexebb megfogalmazásához. ___________________ The aim of this paper is to out line the newest results of physics,i.e.,the stochastic mathematical relations of relativity theory and quantum mechanics as well as irreversible dynamics which can be applied for some economic problems.For example,the correct interpretation of time operators using for the macroeconomic theories may provide a serious improvement in approach to the reality.The stochastic dynamic equilibrium reference functions will take over the role of recent static equilibrium reference points,which may also reveal some nonequilibrium questions of macroeconomics.The concepts and definitions of thermodynamics and biological evolution have been adopted in economics by Paul A. Samuelson, but he did not concern the newest results of quantum mechanics, e.g., the time operators. Now we do it.In addition, following Samuelson,we show that von Neumann growth model cannot be explained as a peculiar extension of thermodynamic irreversibility.

The effect of the reproductivity's velocity on the biodiversity of a theoretical ecosystem

Climate change has a great impact on the build and the work of natural ecosystems. Disappearance of some population or growth of the number in some species can be already caused by little change in temperature. A Theoretical Ecosystem Growth Model was investigated in order to examine the effects of various climate patterns on the ecological equilibrium. This paper examines the diversity of a theoretical ecosystem on the grounds of changing in temperature-climate patterns. Simulations were made from the simplest case to the more complex exercise to explain harder questions. Daily temperature values were calculated according to various functions. The effect of existing climate patterns (historical or future daily temperatures) was analysed where temperature values were from various climatic zones. In this paper it is examined what kind of environmental conditions result larger diversity related to the velocity of reproduction.

Characterizing Internet worm spatial-temporal infection structures

Since the Morris worm was released in 1988, Internet worms continue to be one of top security threats. For example, the Conficker worm infected 9 to 15 million machines in early 2009 and shut down the service of some critical government and medical networks. Moreover, it constructed a massive peer-to-peer (P2P) botnet. Botnets are zombie networks controlled by attackers setting out coordinated attacks. In recent years, botnets have become the number one threat to the Internet. The objective of this research is to characterize spatial-temporal infection structures of Internet worms, and apply the observations to study P2P-based botnets formed by worm infection. First, we infer temporal characteristics of the Internet worm infection structure, i.e., the host infection time and the worm infection sequence, and thus pinpoint patient zero or initially infected hosts. Specifically, we apply statistical estimation techniques on Darknet observations. We show analytically and empirically that our proposed estimators can significantly improve the inference accuracy. Second, we reveal two key spatial characteristics of the Internet worm infection structure, i.e., the number of children and the generation of the underlying tree topology formed by worm infection. Specifically, we apply probabilistic modeling methods and a sequential growth model. We show analytically and empirically that the number of children has asymptotically a geometric distribution with parameter 0.5, and the generation follows closely a Poisson distribution. Finally, we evaluate bot detection strategies and effects of user defenses in P2P-based botnets formed by worm infection. Specifically, we apply the observations of the number of children and demonstrate analytically and empirically that targeted detection that focuses on the nodes with the largest number of children is an efficient way to expose bots. However, we also point out that future botnets may self-stop scanning to weaken targeted detection, without greatly slowing down the speed of worm infection. We then extend the worm spatial infection structure and show empirically that user defenses, e.g. , patching or cleaning, can significantly mitigate the robustness and the effectiveness of P2P-based botnets. To counterattack, we evaluate a simple measure by future botnets that enhances topology robustness through worm re-infection.

Helicopter-borne sea ice thickness measurements in the Storfjord, Spitsbergen from flight HEM_STJ06_01

Results from electromagnetic induction surveys of sea-ice thickness in Storfjorden, Svalbard, reveal large interannual ice-thickness variations in a region which is typically characterized by a reoccurring polynya. The surveys were performed in March 2003, May 2006 and March 2007 with helicopter- and ship-based sensors. The thickness distributions are influenced by sea-ice and atmospheric boundary conditions 2 months prior to the surveys, which are assessed with synthetic aperture radar (SAR) images, regional QuikSCAT backscatter maps and wind information from the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis dataset. Locally formed thin ice from the Storfjorden polynya was frequently observed in 2003 and 2007 (mean thickness 0.55 and 0.37 m, respectively) because these years were characterized by prevailing northeasterly winds. In contrast, the entire fjord was covered with thick external sea ice in 2006 (mean thickness 2.21 m), when ice from the Barents Sea was driven into the fjord by predominantly southerly winds. The modal thickness of this external ice in 2006 increased from 1.2 m in the northern fjord to 2.4 m in the southern fjord, indicating stronger deformation in the southern part. This dynamically thickened ice was even thicker than multi-year ice advected from the central Arctic Ocean in 2003 (mean thickness 1.83 m). The thermodynamic ice thickness of fast ice as boundary condition is investigated with a one-dimensional sea-ice growth model (1DICE) forced with meteorological data from the weather station at the island of Hopen, southeast of Storfjorden. The model results are in good agreement with the modal thicknesses of fast-ice measurements in all years.

Volume averaging of multiphase flows with hydrate formation in subsea pipelines

In oil and gas pipeline operations, the gas, oil, and water phases simultaneously move through pipe systems. The mixture cools as it flows through subsea pipelines, and forms a hydrate formation region, where the hydrate crystals start to grow and may eventually block the pipeline. The potential of pipe blockage due to hydrate formation is one of the most significant flow-assurance problems in deep-water subsea operations. Due to the catastrophic safety and economic implications of hydrate blockage, it is important to accurately predict the simultaneous flow of gas, water, and hydrate particles in flowlines. Currently, there are few or no studies that account for the simultaneous effects of hydrate growth and heat transfer on flow characteristics within pipelines. This thesis presents new and more accurate predictive models of multiphase flows in undersea pipelines to describe the simultaneous flow of gas, water, and hydrate particles through a pipeline. A growth rate model for the hydrate phase is presented and then used in the development of a new three-phase model. The conservation equations of mass, momentum, and energy are formulated to describe the physical phenomena of momentum and heat transfer between the fluid and the wall. The governing equations are solved based on an analytical-numerical approach using a Newton-Raphson method for the nonlinear equations. An algorithm was developed in Matlab software to solve the equations from the inlet to the outlet of the pipeline. The developed models are validated against a single-phase model with mixture properties, and the results of comparative studies show close agreement. The new model predicts the volume fraction and velocity of each phase, as well as the mixture pressure and temperature profiles along the length of the pipeline. The results from the hydrate growth model reveal the growth rate and location where the initial hydrates start to form. Finally, to assess the impact of certain parameters on the flow characteristics, parametric studies have been conducted. The results show the effect of a variation in the pipe diameter, mass flow rate, inlet pressure, and inlet temperature on the flow characteristics and hydrate growth rates.

Overweight duration in older adults and cancer risk: a study of cohorts in Europe and the United States

Recent studies have shown that cancer risk related to overweight and obesity is mediated by time and might be better approximated by using life years lived with excess weight. In this study we aimed to assess the impact of overweight duration and intensity in older adults on the risk of developing different forms of cancer. Study participants from seven European and one US cohort study with two or more weight assessments during follow-up were included (n = 329,576). Trajectories of body mass index (BMI) across ages were estimated using a quadratic growth model; overweight duration (BMI ≥ 25) and cumulative weighted overweight years were calculated. In multivariate Cox models and random effects analyses, a longer duration of overweight was significantly associated with the incidence of obesity-related cancer [overall hazard ratio (HR) per 10-year increment: 1.36; 95 % CI 1.12-1.60], but also increased the risk of postmenopausal breast and colorectal cancer. Additionally accounting for the degree of overweight further increased the risk of obesity-related cancer. Risks associated with a longer overweight duration were higher in men than in women and were attenuated by smoking. For postmenopausal breast cancer, increased risks were confined to women who never used hormone therapy. Overall, 8.4 % of all obesity-related cancers could be attributed to overweight at any age. These findings provide further insights into the role of overweight duration in the etiology of cancer and indicate that weight control is relevant at all ages. This knowledge is vital for the development of effective and targeted cancer prevention strategies.

Land, Power and Technology : Essays on Political Economy and Historical Development

Land Ownership and Development: Evidence from Postwar Japan This paper analyzes the effect of land ownership on technology adoption and structural transformation. A large-scale land reform in postwar Japan enforced a large number of tenant farmers who were cultivating land to become owners of this land. I find that the municipalities which had many owner farmers after the land reform tended to experience a quick entry of new agricultural machines which became available after the reform. The adoption of the machines reduced the dependence on family labor, and led to a reallocation of labor from agriculture to industries and service sectors in urban centers when these sectors were growing. I also analyze the aggregate impact of labor reallocation on economic growth by using a simple growth model and micro data. I find that it increased GDP by about 12 percent of the GDP in 1974 during 1955-74. I also find a large and positive effect on agricultural productivity. Loyalty and Treason: Theory and Evidence from Japan's Land Reform A historically large-scale land reform in Japan after World War II enforced by the occupation forces redistributed a large area of farmlands to tenant farmers. The reform demolished hierarchical structures by weakening landlords' power in villages and towns. This paper investigates how the change in the social and economic structure of small communities affects electoral outcomes in the presence of clientelism. I find that there was a considerable decrease in the vote share of conservative parties in highly affected areas after the reform. I find the supporting evidence that the effect was driven by the fact that the tenant farmers who had obtained land exited from the long-term tenancy contract and became independent landowners. The effect was relatively persistent. Finally, I also find the surprising result that there was a decrease, rather than an increase, in turnout in these areas after the reform.  Geography and State Fragmentation We examine how geography affects the location of borders between sovereign states in Europe and surrounding areas from 1500 until today at the grid-cell level. This is motivated by an observation that the richest places in this region also have the highest historical border presence, suggesting a hitherto unexplored link between geography and modern development, working through state fragmentation. The raw correlations show that borders tend to be located on mountains, by rivers, closer to coasts, and in areas suitable for rainfed, but not irrigated, agriculture. Many of these patterns also hold with rigorous spatial controls. For example, cells with more rivers and more rugged terrain than their neighboring cells have higher border densities. However, the fragmenting effects of suitability for rainfed agriculture are reversed with such neighbor controls. Moreover, we find that borders are less likely to survive over time when they separate large states from small, but this size-difference effect is mitigated by, e.g., rugged terrain.

Crystallization on the Mesoscale : Self-Assembly of Iron Oxide Nanocubes into Mesocrystals

Self-assembly of nanoparticles is a promising route to form complex, nanostructured materials with functional properties. Nanoparticle assemblies characterized by a crystallographic alignment of the nanoparticles on the atomic scale, i.e. mesocrystals, are commonly found in nature with outstanding functional and mechanical properties. This thesis aims to investigate and understand the formation mechanisms of mesocrystals formed by self-assembling iron oxide nanocubes. We have used the thermal decomposition method to synthesize monodisperse, oleate-capped iron oxide nanocubes with average edge lengths between 7 nm and 12 nm and studied the evaporation-induced self-assembly in dilute toluene-based nanocube dispersions. The influence of packing constraints on the alignment of the nanocubes in nanofluidic containers has been investigated with small and wide angle X-ray scattering (SAXS and WAXS, respectively). We found that the nanocubes preferentially orient one of their {100} faces with the confining channel wall and display mesocrystalline alignment irrespective of the channel widths.  We manipulated the solvent evaporation rate of drop-cast dispersions on fluorosilane-functionalized silica substrates in a custom-designed cell. The growth stages of the assembly process were investigated using light microscopy and quartz crystal microbalance with dissipation monitoring (QCM-D). We found that particle transport phenomena, e.g. the coffee ring effect and Marangoni flow, result in complex-shaped arrays near the three-phase contact line of a drying colloidal drop when the nitrogen flow rate is high. Diffusion-driven nanoparticle assembly into large mesocrystals with a well-defined morphology dominates at much lower nitrogen flow rates. Analysis of the time-resolved video microscopy data was used to quantify the mesocrystal growth and establish a particle diffusion-based, three-dimensional growth model. The dissipation obtained from the QCM-D signal reached its maximum value when the microscopy-observed lateral growth of the mesocrystals ceased, which we address to the fluid-like behavior of the mesocrystals and their weak binding to the substrate. Analysis of electron microscopy images and diffraction patterns showed that the formed arrays display significant nanoparticle ordering, regardless of the distinctive formation process.  We followed the two-stage formation mechanism of mesocrystals in levitating colloidal drops with real-time SAXS. Modelling of the SAXS data with the square-well potential together with calculations of van der Waals interactions suggests that the nanocubes initially form disordered clusters, which quickly transform into an ordered phase.

Resolved Stars' Insights into Galaxy Physics

Thesis (Ph.D.)--University of Washington, 2016-08

Alternaria Spores in the Air Across Europe: Abundance, Seasonality and Relationships with Climate, Meteorology and Local Environment

We explored the temporal and spatial variations in airborne Alternaria spore quantitative and phenological features in Europe using 23 sites with annual time series between 3 and 15 years. The study covers seven countries and four of the main biogeographical regions in Europe. The observations were obtained with Hirst-type spore traps providing time series with daily records. Site locations extend from Spain in the south to Denmark in the north and from England in the West to Poland in the East. The study is therefore the largest assessment ever carried out for Europe concerning Alternaria. Aerobiological data were investigated for temporal and spatial patterns in their start and peak season dates and their spore indices. Moreover, the effects of climate were checked using meteorological data for the same period, using a crop growth model. We found that local climate, vegetation patterns and management of landscape are governing parameters for the overall spore concentration, while the annual variations caused by weather are of secondary importance but should not be neglected. The start of the Alternaria spore season varies by several months in Europe, but the peak of the season is more synchronised in central northern Europe in the middle of the summer, while many southern sites have peak dates either earlier or later than northern Europe. The use of a crop growth model to explain the start and peak of season suggests that such methods could be useful to describe Alternaria seasonality in areas with no available observations.