Chagas congénito de segunda generación en Uruguay: Primer caso sintomático descrito en el país

El Chagas congénito se produce cuando la embarazada infectada trasmite el parásito al feto, situación que puede suceder en cualquier estadio de la enfermedad y momento del embarazo. Es el único mecanismo de trasmisión presente actualmente en Uruguay, con una incidencia cercana al 4%. La mayoría de los neonatos infectados nacen asintomáticos y un 10% al 40% presentan síntomas que son indistinguibles de otras infecciones de trasmisión vertical. La prematurez, el bajo peso, la hepatoesplenomegalia y las alteraciones hematológicas son los síntomas más frecuentes. El diagnóstico representa un desafío en aquellos lugares del país en donde, si bien la enfermedad era considerada endémica, no se realiza actualmente el screening obligatorio de la embarazada. Se describe un lactante procedente de Paysandú, de medio socioeconómico deficitario, que fue pretérmino severo y que presentó al nacer alteraciones hematológicas de las tres series y hepatoesplenomegalia, lo cual motivó múltiples estudios. Sin embargo, no se sospechó la enfermedad hasta los 5 meses de vida, cuando volvió a ingresar por otra patología. Se confirmó la infección a los 9 meses mediante tres técnicas serológicas diferentes. Se indicó tratamiento con nifurtimox por 2 meses y a los 26 y 36 meses de vida presentó serología negativa. Consideramos importante tener alto índice de sospecha de la enfermedad en neonatos con signos de infección congénita y sin serología materna que la descarte. Es importante saber que el tratamiento antes del primer año de vida tiene una excelente respuesta y evita secuelas crónicas que pueden ser invalidantes en etapa adulta.

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Síntese do Poli (ácido láctico) por policondensação direta utilizando um planejamento fatorial

The environmental impact caused by the disposal of non-biodegradable polymer packaging on the environment, as well as the high price and scarcity of oil, caused increase of searches in the area of biodegradable polymers from renewable resources were developed. The poly (lactic acid) (PLA) is a promising polymer in the market, with a large availability of raw material for the production of its monomer, as well as good processability. The aimed of this study was synthesis PLA by direct polycondesation of lactic acid, using the tool of experimental design (DOE) (central composite rotatable design (CCRD)) to optimize the conditions of synthesis. The polymer obtained was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), viscosimetric analysis, differential scanning calorimeter (DSC) and size exclusion chromatography (SEC). The results confirmed the formation of a poly (lactic acid) semicrystalline in the syntheses performed. Through the central composite rotatable design was possible to optimize the crystallization temperature (Tc) and crystallinity degree (Xc). The crystallization temperature maximum was found for percentage of catalyst around the central point (0,3 (%W)) and values of time ranging from the central point (6h) to the upper level (+1) (8h). The crystallization temperature maximum was found for the total synthesis time of 4h (-1) and percentage of catalyst 0,1(W%) (-1). The results of size exclusion chromatography (SEC) showed higher molecular weights to 0,3 (W%) percent of catalyst and total time synthesis of 3,2h

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Aproveitamento de resíduo de beneficiamento do caulim na produção de porcelanato cerâmico

Nowadays, industries from all sectors have great concerns over the disposition of the residues generated along the productive process. This is not different in the mineral sector, as this generates great volumes of residues. It was verified that the kaolin improvement industry generates great volumes of residue basically constituted of kaolinite, muscovite mica and quartz, which are basic constitution elements to formularisations of ceramics masses to the production of covering of stoneware tiles type. This happens because the methodology applied to the improvement process is still very rudimentary, what causes a very low yield, only ¼ from all the material volume that enters the improvement process, in the end, is marketable. The disposal of this residue, in a general way, causes a very big negative environmental impact, what has justified the researches efforts aiming to find a rational solution to this problem. In this way, the intention of this present work is the utilization of this residue in the manufacture of products to high quality ceramics covering, stoneware tiles in an industrial scale. For this purpose, the influence of the addition of the residue to a standard ceramics mass used by a ceramics sector company, already established in the market, with the intention of verifying the possibility of use of this residue as the mass complementary raw material and even the possible partial or total substitution of one of the components of the mass for the raw material in evidence will be studied. To the accomplishment of this work, the kaolin improvement residue generated by an industry of exploitation and improvement of kaolin, located in the region of Equador-RN, in the levels 1,2,4,8, 16 and 32% will be added to the standard mass already used for the production of stoneware tiles. The raw materials used, kaolin residue and the standard mass, were characterized through DRX, FRX, DTA, TGA and dilatometry. After the sintering of the bodies of test, tests of water absorption, apparent porosity, post burning linear retraction, apparent specific mass and flexural strength (3 point bending) were realized to determinate the technological properties of these materials. The results show the studied residue can be considered raw material of great potential to the industry of floor and ceramics covering of the stoneware tiles type

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal

Modelagem analítica e experimental da filtração em meios porosos

Deep bed filtration occurs in several industrial and environmental processes like water filtration and soil contamination. In petroleum industry, deep bed filtration occurs near to injection wells during water injection, causing injectivity reduction. It also takes place during well drilling, sand production control, produced water disposal in aquifers, etc. The particle capture in porous media can be caused by different physical mechanisms (size exclusion, electrical forces, bridging, gravity, etc). A statistical model for filtration in porous media is proposed and analytical solutions for suspended and retained particles are derived. The model, which incorporates particle retention probability, is compared with the classical deep bed filtration model allowing a physical interpretation of the filtration coefficients. Comparison of the obtained analytical solutions for the proposed model with the classical model solutions allows concluding that the larger the particle capture probability, the larger the discrepancy between the proposed and the classical models

Extração de boro de água produzida sintética por sistema microemulsionado

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Aplicação de técnicas eletroquímicas na determinação do potencial de corrosividade de ligas de alumínio em água produzida

The resistance of aluminum and their alloys, to the corrosion phenomenon, in aqueous solutions, is a result of the oxide layer formed. However, the corrosion process in the aluminum alloy is associated with the presence a second phase of particles or the presence of chloride ions which promote the disruption of the oxide layer located producing the corrosion process. On the other hand, the term water produced is used to describe the water after the separation of the oil and gas in API separators. The volumes of produced water arrive around 5 more times to the volume of oil produced. The greatest feature of the water is the presence of numerous pollutants. Due to the increased volume of waste around the world in the current decade, the outcome and the effect of the discharge of produced water on the environment has recently become an important issue of environmental concern where numerous treatments are aimed at reducing these contaminants before disposal. Then, this study aims to investigate the electrochemical corrosion behavior of aluminum alloy 6060 in presence of water produced and the influence of organic components as well as chloride ions, by using the electrochemical techniques of linear polarization. The modification of the passive layer and the likely breakpoints were observed by atomic force microscopy (AFM). In the pit formation potential around -0.4 to -0.8 V/EAg/AgCl was observed that the diffusion of chloride ions occurs via the layer formed with the probable formation of pits. Whereas, at temperatures above 65 °C, it was observed that the range of potential for thepit formation was -0.4 to -0.5 V/EAg/AgCl. In all reactions, the concentration of Al(OH)3 in the form of a gel was observed

Avaliação da ecotoxicidade de percolados em áreas de disposição de resíduos na região metropolitana de Natal/RN

Leachates are effluent produced by decomposition of solid waste, they have complex composition and can be highly toxic. Therefore such percolated liquid should be collected and treated properly to avoid environmental contamination of soil and of water bodies. The objective of this study was to evaluate the toxicity through ecotoxicological tests with Ceriodaphnia dubia (Cladocera - Crustacea) of percolated liquids generated in two different systems of municipal solid waste (MSW) disposal in the city of Natal/ RN: A Sanitary Landfill in the Metropolitan Region of Natal/ RN, and in a dump off area. Furthermore, it was evaluated the possible contamination of the underground water of the dump off area. Two monthly samples were taken at four points between the months of May/2009 and January/2010. The Point "A" corresponds to the end of the pond leachate treatment in ASRMN; The Point "B" corresponds to a containment pond at the dump. The Point "C" is an area near one of the cells of the dump off area where the leachate outcrops; The Point "D" stands for an underground water well at the area. The last point, called "E" was sampled only once and corresponds to the slurry produced by temporary accumulation of solid waste in the open area of the dump. The ecotoxicological tests, acute and chronic, followed the ABNT 13373/2005 rules, with some modifications. The samples were characterized by measuring the pH number, the dissolved oxygen (DO), the salinity, BOD5, COD, Cd, Cu, Pb, Cr, Fe, Mg, Ni, and Zn. At Point A, the average number of EC50-48h ranged between 1.0% and 2.77% (v/v), showing a high toxicity of the leachate to C.dubia in all months. To this point, positive correlations were found between the EC50- 48 with precipitation. Negative correlations were found between the EC50- 48h with salinity. At point B there was no response of the acute exposure of organisms to the test samples. At point C the EC50-48h ranged from 17.68% to 35.36% in just two months of the five ones analyzed, not correlated meaning. Point D, the EC50-48h level ranged between 12.31% and 71.27%, showed a negative correlation with, only, precipitation. Although it was observed toxicity of underground water in the Landfill Area, there was no evidence of water contamination by leachate, however, due to the toxic character of this water, additional tests should be conducted to confirm the quality of water that is used for human supply. At point E there was no acute toxicity. These results support the dangers of inappropriate disposal of MSW to water bodies due to the high toxicity of the leachate produced highlighting the necessity of places of safe confinement and a treatment system more effective to it

Avaliação ecotoxicológica de fármacos psicotrópicos e suas possíveis interações com nanomateriais usando embriões de peixe-zebra

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Programa de Pós-Graduação em Biologia Animal, 2016.

Efeito do gesso agrícola sobre a fitotoxicidade de cobre em aveia.

A viticultura no Rio Grande do Sul faz uso de grande quantidade de fungicidas cúpricos, que ao se acumular no solo pode atingir níveis tóxicos às plantas. O gesso agrícola, subproduto das indústrias na produção de ácido fosfórico, é um resíduo abundante e alvo de estudo para reaproveitamento e descarte apropriado. O objetivo deste trabalho foi verificar o efeito do gesso na mitigação do cobre (Cu) na cultura da aveia e efeitos no solo.

EMBALAGENS: O QUE FAZER COM ELAS ?

Nos últimos anos os problemas com o descarte de materiais agravaram-se demasiadamente com o advento da chamada “cultura do descartável”, onde os países passaram a seguir os atuais padrões de consumo dos países capitalistas avançados, que dão preferência às embalagens descartáveis por constituírem uma comodidade para os usuários e uma grande fonte de lucro para as empresas. Tais transtornos podem ser resumidos nos altos custos sociais do gerenciamento de resíduos; questões com o saneamento público e contaminação ambiental; escassez das áreas de deposição de resíduos causada pela ocupação e valorização de áreas urbanas. Assim, é importante uma discussão sobre até que ponto o excesso de embalagens e seu descarte prematuro influenciam na degradação do meio ambiente e mais ainda, como a sociedade pode mudar seus hábitos de consumo na direção de uma sociedade mais justa e menos perdulária. Em todas essas reflexões um fato é certo: deve haver uma participação de todos os atores envolvidos em nossa sociedade, com responsabilidade partilhada e implementada de forma individualizada em um primeiro momento, para em seguida, um “agir” conjunto para que as pessoas tenham a noção de comunidade, de união em prol de um mesmo objetivo.

GERENCIAMENTO DE RESÍDUOS SÓLIDOS URBANOS NOS MUNICÍPIOS DE PRESIDENTE PRUDENTE, OURINHOS E ASSIS - SÃO PAULO, BRASIL

Tendo em vista o crescimento das cidades e aumento da população, temos um aumento do consumo, principalmente pelas parcelas da sociedade que possuem maior poder aquisitivo, fato que tem como conseqüência o aumento da quantidade de lixo gerado. Dentre a cadeia de produção, geração e descarte destes materiais têm-se impactos que agridem de maneira direta o meio do qual fazemos parte. Uma das questões colocadas é a da gestão e gerenciamento dos resíduos sólidos urbanos (RSU), além dos trabalhadores que sobrevivem da separação e venda dos materiais recicláveis. Deste modo, tendo em vista este descompasso imposto pelo capital, que precariza o homem, o objetivo do trabalho é analisar os municípios de Presidente Prudente, Ourinhos e Assis, no que diz respeito à gestão e gerenciamento dos resíduos sólidos urbanos, assim como a organização dos catadores em cooperativas ou associações, levando em conta a valorização dos catadores, sendo eles, os responsáveis pela execução de todo o processo de coleta e venda dos resíduos sólidos recicláveis. Como procedimentos metodológicos, foram realizados trabalhos de campo nos municípios, entrevistas com os cooperados e análise junto às prefeituras sobre o modelo de gestão e gerenciamento dos resíduos.

MUDANÇAS NA HIDROGRAFIA DA BACIA DO ARROIO CASTELHANO, RS, BRASIL, ENTRE AS DÉCADAS DE 1980 E 2010

Este trabalho avalia as intervenções humanas na rede de drenagem da Bacia hidrográfica do arroio Castelhano, RS, Brasil. Nesta bacia de 675,3 km2 e com 66% de sua área no município de Venâncio Aires, tradicionalmente ocupada por pequenas propriedades sem maiores intervenções para o aproveitamento ou o descarte dos recursos hídricos, a modernização agrícola e o crescimento urbano a partir da década de1970, começaram a demandar controles dos regimes hidrológicos. Registros documentaram obras do PROVÁRZEAS e do DNOS, nas décadas de 1980 e 1990 e a análise em SIG de mapas da década de 1970 e imagem de satélite de 2007 mostrou que a hidrografia foi toda rearranjada: o arroio Grande I teve a extensão do seu baixo curso reduzida em 23%, enquanto o arroio Castelhano sofreu uma redução de 30%, devido a canalizações na sua várzea. A intervenção humana nos canais de drenagem alterou a dinâmica do curso principal, de tal forma que concordamos com Pigeon (2005) quando afirma que as sociedades são apenas parcialmente vítimas dos perigos naturais, pois elas preparam consideravelmente seu próprio risco.