Scalable Unified Transform Architecture for Advanced Video Coding Embedded Systems

A novel high throughput and scalable unified architecture for the computation of the transform operations in video codecs for advanced standards is presented in this paper. This structure can be used as a hardware accelerator in modern embedded systems to efficiently compute all the two-dimensional 4 x 4 and 2 x 2 transforms of the H.264/AVC standard. Moreover, its highly flexible design and hardware efficiency allows it to be easily scaled in terms of performance and hardware cost to meet the specific requirements of any given video coding application. Experimental results obtained using a Xilinx Virtex-5 FPGA demonstrated the superior performance and hardware efficiency levels provided by the proposed structure, which presents a throughput per unit of area relatively higher than other similar recently published designs targeting the H.264/AVC standard. Such results also showed that, when integrated in a multi-core embedded system, this architecture provides speedup factors of about 120x concerning pure software implementations of the transform algorithms, therefore allowing the computation, in real-time, of all the above mentioned transforms for Ultra High Definition Video (UHDV) sequences (4,320 x 7,680 @ 30 fps).

Influência da espessura do substrato dental sobre a eficácia clareadora e citotoxicidade de diferentes protocolos de clareamento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relação entre níveis de fluoreto na água de abastecimento público e fluorose dental

OBJETIVO: Avaliar a prevalência da fluorose dentária em escolares sujeitos a diferentes concentrações de fluoreto na água de abastecimento público das suas cidades. MÉTODOS: A amostra foi composta de 386 escolares de sete anos de idade, moradores de dois municípios do estado de São Paulo que realizaram heterocontrole da fluoretação da água de 1998 a 2002, um deles apresentando concentração homogênea de fluoreto e o outro oscilante. Fluorose dental foi determinada examinando os incisivos superiores permanentes (secos) pelo índice de Dean, o grau de fluorose classificado como questionável foi considerado como fluorose. Variáveis sociodemográficas e questões sobre saúde bucal foram avaliadas com questionário estruturado enviado aos pais/responsáveis. Associações foram verificadas por meio de regressão logística múltipla (p<0,05). RESULTADOS: Ambos os municípios apresentaram grau leve de fluorose. A prevalência de fluorose no município com teores oscilantes de flúor na água foi de 31,4% e no município com teores homogêneos foi de 79,9%. A prevalência de fluorose foi associada com o município com teores de flúor homogêneos na água (OR=8,33, IC 95%: 5,15;13,45) e não possuir automóvel (OR=2,10, IC 95%: 1,27;3,49) CONCLUSÕES: Embora a prevalência de fluorose tenha sido maior nas crianças do município que possuía melhor controle da concentração ótima de fluoreto na água, esta não afetou a estética dental dos comprometidos.

Factores salivales asociados a prevalencia e incremento de caries dental en escolares rurales

OBJETIVO: Evaluar la asociación de la saliva y la prevalencia de caries. MÉTODOS: Estudio longitudinal de dos años, en una población de niños escolares rural de Cruz del Eje, Córdoba-Argentina, entre los años 2000 y 2002. La población de estudio comprendió la totalidad de escolares asistentes (N=196) a ocho escuelas rurales de 5 a 14 años de edad, ambos sexos. Se estudiaron tres momentos (N=46): base, 12 y 24 meses. Se evaluaron los componentes salivales y los índices CPOD y ceod. Se crearon las variables nominales, "caries" y "caries nueva" para evaluar riesgo de caries en el estudio base y en los tiempos 12 y 24 meses, respectivamente. Se aplicó el análisis de componentes principales para seleccionar factores salivales relacionados con la presencia de caries que a posterior se categorizaron según valor de la mediana como punto de corte. RESULTADOS: Se observó alta prevalencia de caries (50%-90%) en los tres momentos de estudio. El incremento de caries fue significativamente mayor a los 12 meses (p=0.000), comparado con el observado a los 24 meses. En el estudio base se observó concentración baja y homogénea de los iones fosfato y calcio, y asociación significativa (p<0.050) entre calcio y fósforo y relación Ca/P con la presencia de caries. CONCLUSIONES: Las concentraciones de iones fosfato y de la relación molar calcio/fósforo podrían ser considerados como factores de riesgo para el desarrollo de caries en poblaciones con características particulares como la estudiada.

Estimate of DMFT index using teeth most affected by dental caries in twelve-year-old children

The objective of the study was to develop regression models to describe the epidemiological profile of dental caries in 12-year-old children in an area of low prevalence of caries. Two distinct random probabilistic samples of schoolchildren (n=1,763) attending public and private schools in Piracicaba, Southeastern Brazil, were studied. Regression models were estimated as a function of the most affected teeth using data collected in 2005 and were validated using a 2001 database. The mean (SD) DMFT index was 1.7 (2.08) in 2001 and the regression equations estimated a DMFT index of 1.67 (1.98), which corresponds to 98.2% of the DMFT index in 2001. The study provided detailed data on the caries profile in 12-year-old children by using an updated analytical approach. Regression models can be an accurate and feasible method that can provide valuable information for the planning and evaluation of oral health services.

Immunohistochemistry in formalin-gel fixed tissues

There are several hazards in histopathology laboratories and its staff must ensure that their professional activity is set to the highest standards while complying with the best safety procedures. Formalin is one of the chemical hazards to which such professionals are routinely exposed. To decrease this contact, it is suggested that 10% neutral buffered liquid formalin (FL) is replaced by 10% formalin-gel (FG), given the later reduces the likelihood of spills and splashes, and decreased fume levels are released during its handling, proving itself less harmful. However, it is mandatory to assess the effectiveness of FG as a fixative and ensure that the subsequent complementary techniques, such as immunohistochemistry (IHC), are not compromised. Two groups of 30 samples from human placenta have been fixed with FG and FL fixatives during different periods of time (12, 24, and 48 hours) and, thereafter, processed, embedded, and sectioned. IHC for six different antibodies was performed and the results were scored (0–100) using an algorithm that took into account immunostaining intensity, percentage of staining structures, non-specific immunostaining, contrast, and morphological preservation. Parametric and non-parametric statistical tests were used (alpha = 0•05). All results were similar for both fixatives, with global score means of 95•36±6•65 for FL and 96•06±5•80 for FG, and without any statistical difference (P>0•05). The duration of the fixation had no statistical relevance also (P>0•05). So it is proved here FG could be an effective alternative to FL.

High Performance Multi-Standard Architecture for DCT Computation in H.264/AVC High Profile and HEVC Codecs

A new high performance architecture for the computation of all the DCT operations adopted in the H.264/AVC and HEVC standards is proposed in this paper. Contrasting to other dedicated transform cores, the presented multi-standard transform architecture is supported on a completely configurable, scalable and unified structure, that is able to compute not only the forward and the inverse 8×8 and 4×4 integer DCTs and the 4×4 and 2×2 Hadamard transforms defined in the H.264/AVC standard, but also the 4×4, 8×8, 16×16 and 32×32 integer transforms adopted in HEVC. Experimental results obtained using a Xilinx Virtex-7 FPGA demonstrated the superior performance and hardware efficiency levels provided by the proposed structure, which outperforms its more prominent related designs by at least 1.8 times. When integrated in a multi-core embedded system, this architecture allows the computation, in real-time, of all the transforms mentioned above for resolutions as high as the 8k Ultra High Definition Television (UHDTV) (7680×4320 @ 30fps).

Beliefs and attitudes about endemic dental fluorosis among adolescents in rural Brazil

OBJECTIVE: To understand beliefs and attitudes about fluorosis among young people living in a rural area. METHODOLOGICAL PROCEDURES: Qualitative study consisting of semi-structured interviews with 23 adolescents with dental fluorosis, 14 teachers and three health authorities in the city of São Francisco, Southeastern Brazil, in 2002. Content analysis and social representation theory were applied. ANALYSIS OF RESULTS: The organoleptic characteristics of carbonates that affect groundwater (salty flavor, whitish coloration, and turbidity) associated with negative aspects of household use of this water are considered a cause of mottled enamel. Even after contact with researchers who investigated this phenomenon and helped find a solution for this condition, the local population is still unwilling to accept fluoride as the cause of the problem and does not fully agree to use water from other sources because they are afraid of the quality of water. CONCLUSIONS: Misperceptions of the causes of dental fluorosis and water treatment costs compromise the implementation of uncontaminated surface water supplies. Health education strategies are required in parallel with solutions for securing water supply in drought-ravaged areas.

Association of dental enamel lead levels with risk factors for environmental exposure

OBJECTIVE: To analyze household risk factors associated with high lead levels in surface dental enamel. METHODS: A cross-sectional study was conducted with 160 Brazilian adolescents aged 14-18 years living in poor neighborhoods in the city of Bauru, southeastern Brazil, from August to December 2008. Body lead concentrations were assessed in surface dental enamel acid-etch microbiopsies. Dental enamel lead levels were measured by graphite furnace atomic absorption spectrometry and phosphorus levels were measured by inductively coupled plasma optical emission spectrometry. The parents answered a questionnaire about their children's potential early (05 years old) exposure to well-known lead sources. Logistic regression was used to identify associations between dental enamel lead levels and each environmental risk factor studied. Social and familial covariables were included in the models. RESULTS: The results suggest that the adolescents studied were exposed to lead sources during their first years of life. Risk factors associated with high dental enamel lead levels were living in or close to a contaminated area (OR = 4.49; 95% CI: 1.69;11.97); and member of the household worked in the manufacturing of paints, paint pigments, ceramics or batteries (OR = 3.43; 95% CI: 1.31;9.00). Home-based use of lead-glazed ceramics, low-quality pirated toys, anticorrosive paint on gates and/or sale of used car batteries (OR = 1.31; 95% CI: 0.56;3.03) and smoking (OR = 1.66; 95% CI: 0.52;5.28) were not found to be associated with high dental enamel lead levels. CONCLUSIONS: Surface dental enamel can be used as a marker of past environmental exposure to lead and lead concentrations detected are associated to well-known sources of lead contamination.

Edentulism and shortened dental arch in Brazilian elderly from the National Survey of Oral Health 2003

OBJECTIVE: To describe the distribution of edentulism and estimate the prevalence of functional dentition and shortened dental arch among elderly population. METHODS: A population-based epidemiological study was carried out with a sample of 5,349 respondents aged 65 to 74 years obtained from the 2002 and 2003 Brazilian Ministry of Health/Division of Oral Health survey database. The following variables were studied: gender; macroregion of residence; missing teeth; percentage that met the World Health Organization goal for oral health in the age group 65 to 74 years (50% having at least 20 natural teeth); presence of shortened dental arch; number of posterior occluding pairs of teeth. The Chi-square test assessed the association between categorical variables. The Kruskal-Wallis and Mann-Whitney tests were used to assess differences of mean between number of posterior occluding pairs teeth, macro-region and gender. RESULTS: The elderly population had an average of 5.49 teeth (SD: 7.93) with a median of 0. The proportion of completely edentulous respondents was 54.7%. Complete edentulism was 18.2% in the upper arch and 1.9% in the lower arch. The World Health Organization goal was achieved in 10% of all respondents studied. However, only 2.7% had acceptable masticatory function and aesthetics (having at least shortened dental arch) and a mean number of posterior occluding pairs of 6.94 (SD=2.97). There were significant differences of the percentage of respondents that met the World Health Organization goal and presence of shortened dental arch between men and women. There were differences in shortened dental arch between macroregions. CONCLUSIONS: The Brazilian epidemiological oral health survey showed high rate of edentulism and low rate of shortened dental arch in the elderly population studied, thus suggesting significant functional and aesthetic impairment in all Brazilian macroregions especially among women.

Implementação em hardware reconfigurável de método de separação de dados hiperespetrais

Relatório do Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

On the hardware and software architecture of the robuter mobile platform: a hands-on approach

The Robuter is a robotic mobile platform that is located in the “Hands-On” Laboratory of the IPP-Hurray! Research Group, at the School of Engineering of the Polytechnic Institute of Porto. Recently, the Robuter was subject of an upgrading process addressing two essential areas: the Hardware Architecture and the Software Architecture. This upgrade in process was triggered due to technical problems on-board of the robot and also to the fact that the hardware/software architecture has become obsolete. This Technical Report overviews the most important aspects of the new Hardware and Software Architectures of the Robuter. This document also presents a first approach on the first steps towards the use of the Robuter platform, and provides some hints on future work that may be carried out using this mobile platform.

Evaluating P-NET message's response time with fixed priority queuing at application process level

P-NET is a multi-master fieldbus standard based on a virtual token passing scheme. In P-NET each master is allowed to transmit only one message per token visit. In the worst-case, the communication response time can be derived considering that, in each token cycle, all stations use the token to transmit a message. In this paper, we define a more sophisticated P-NET model, which considers the actual token utilisation. We then analyse the possibility of implementing a local priority-based scheduling policy to improve the real-time behaviour of P-NET.

From task scheduling in single processor environments to message scheduling in a PROFIBUS fieldbus network

In this paper we survey the most relevant results for the prioritybased schedulability analysis of real-time tasks, both for the fixed and dynamic priority assignment schemes. We give emphasis to the worst-case response time analysis in non-preemptive contexts, which is fundamental for the communication schedulability analysis. We define an architecture to support priority-based scheduling of messages at the application process level of a specific fieldbus communication network, the PROFIBUS. The proposed architecture improves the worst-case messages’ response time, overcoming the limitation of the first-come-first-served (FCFS) PROFIBUS queue implementations.

An architecture for reliable distributed computer-controlled systems

In Distributed Computer-Controlled Systems (DCCS), both real-time and reliability requirements are of major concern. Architectures for DCCS must be designed considering the integration of processing nodes and the underlying communication infrastructure. Such integration must be provided by appropriate software support services. In this paper, an architecture for DCCS is presented, its structure is outlined, and the services provided by the support software are presented. These are considered in order to guarantee the real-time and reliability requirements placed by current and future systems.