Preliminary studies on predicting the setting season of oysters for the benefit of shellfish farmers

Preliminary findings from a spatfall forecasting programme initiated in April 1981 at Himamaylan River, Negros Occidental are presented. Two main activities are involved: 1) monitoring of daily counts of oyster larvae in the plankton; and 2) monitoring of actual setting of oysters on standardized collectors put in the vicinity of oyster farm sites. Findings indicate that when the count of mature larvae exceeds 5 per 100 ml sample and persists for at least 3 days, spat may be expected to occur shortly afterwards.

Cryopreservation of cynomolgus monkey (Macaca fascicularis) spermatozoa in a chemically defined extender

Aim: To establish a method for cynomolgus monkey sperm cryopreservation in a chemically defined extender. Methods: Semen samples were collected by electro-ejaculation from four sexually mature male cynomolgus monkeys. The spermatozoa were frozen in straws by liquid nitrogen vapor using egg-yolk-free Tes-Tris (mTTE) synthetic extender and glycerol as cryoprotectant. The effects of glycerol concentration (1%,3%, 5%, 10% and 15% [v/v]) and its equilibration time (10 min, 30 min, 60 min and 90 min) on post-thaw spermatozoa were examined by sperm motility and sperm head membrane integrity. Results: The post-thaw motility and head membrane integrity of spermatozoa were significantly higher (P < 0.05) for 5% glycerol (42.95 +/- 2.55 and 50.39 +/- 2.42, respectively) than those of the other groups (1%: 19.19 +/- 3.22 and 24.84 +/- 3.64; 3%: 34.23 +/- 3.43 and 41.37 +/- 3.42; 10%: 15.68 +/- 2.36 and 21.39 +/- 3.14; 15%: 7.47 +/- 1.44 and 12.90 +/- 2.18). The parameters for 30 min equilibration (42.95 2.55 and 50.39 2.42) were better (P < 0.05) than those of the other groups (10 min: 31.33 +/- 3.06 and 38. 98 +/- 3.31; 60 min: 32.49 +/- 3.86 and 40.01 +/- 4.18; 90 min: 31.16 +/- 3.66 and 38.30 +/- 3.78). Five percent glycerol and 30 min equilibration yielded the highest post-thaw sperm motility and head membrane integrity. Conclusion: Cynomolgus monkey spermatozoa can be successfully cryopreserved in a chemically defined extender, which is related to the concentration and the equilibration time of glycerol.

Regulation: A Burden in Biopharmaceutical Industry? The Case of EU-Risk Management Plans

The generation of new medicinal products is both a contributor to global economic growth and a source of valuable benefits to human health. Given their direct responsibility for public health, regulatory authorities monitor closely both the development and exploitation of the underlying technologies and the products derived from them. The manner in which such regulation is implemented can result in regulators constraining or facilitating the generation of new products. This paper will study as an example the impact of EU Risk Management Plans (EU-RMPs), which have been mandatory for the approval of new medicines since 2005, on both the industry and regulatory authorities. In interviews, the responses of those who had experience of the implementation of EU-RMPs were mixed. Although the benefits of a more structured and predictable approach to the evaluation of risk were appreciated, some respondents perceived the regulation as an excessive burden on their organisations. The exploration of factors that influence how EU-RMP regulation affects individual firms provides new insights for both regulators and managers, and demonstrates one aspect of the complexity of the process by which new medicinal products are brought to market.

Regulation: A burden in biopharmaceutical industry? The case of EU-risk management plans

The generation of new medicinal products is both a contributor to global economic growth and a source of valuable benefits to human health. Given their direct responsibility for public health, regulatory authorities monitor closely both the development and exploitation of the underlying technologies and the products derived from them. The manner in which such regulation is implemented can result in regulators constraining or facilitating the generation of new products. This paper will study as an example the impact of EU Risk Management Plans (EU-RMPs), which have been mandatory for the approval of new medicines since 2005, on both the industry and regulatory authorities. In interviews, the responses of those who had experience of the implementation of EU-RMPs were mixed. Although the benefits of a more structured and predictable approach to the evaluation of risk were appreciated, some respondents perceived the regulation as an excessive burden on their organisations. The exploration of factors that influence how EU-RMP regulation affects individual firms provides new insights for both regulators and managers, and demonstrates one aspect of the complexity of the process by which new medicinal products are brought to market. © 2010 IEEE.

Combining information sources for confidence estimation with CRF models

Obtaining accurate confidence measures for automatic speech recognition (ASR) transcriptions is an important task which stands to benefit from the use of multiple information sources. This paper investigates the application of conditional random field (CRF) models as a principled technique for combining multiple features from such sources. A novel method for combining suitably defined features is presented, allowing for confidence annotation using lattice-based features of hypotheses other than the lattice 1-best. The resulting framework is applied to different stages of a state-of-the-art large vocabulary speech recognition pipeline, and consistent improvements are shown over a sophisticated baseline system. Copyright © 2011 ISCA.

Mechanical properties of hierarchical lattices

This paper focuses on the stiffness and strength of lattices with multiple hierarchical levels. We examine two-dimensional and three-dimensional lattices with up to three levels of structural hierarchy. At each level, the topology and the orientation of the lattice are prescribed, while the relative density is varied over a defined range. The properties of selected hierarchical lattices are obtained via a multiscale approach applied iteratively at each hierarchical level. The results help to quantify the effect that multiple orders of structural hierarchy produces on stretching and bending dominated lattices. Material charts for the macroscopic stiffness and strength illustrate how the property range of the lattices can expand as subsequent levels of hierarchy are added. The charts help to gain insight into the structural benefit that multiple hierarchies can impart to the macroscopic performance of a lattice. © 2013 Elsevier Ltd. All rights reserved.

Using sub-word-level information for confidence estimation with conditional random field models

The task of word-level confidence estimation (CE) for automatic speech recognition (ASR) systems stands to benefit from the combination of suitably defined input features from multiple information sources. However, the information sources of interest may not necessarily operate at the same level of granularity as the underlying ASR system. The research described here builds on previous work on confidence estimation for ASR systems using features extracted from word-level recognition lattices, by incorporating information at the sub-word level. Furthermore, the use of Conditional Random Fields (CRFs) with hidden states is investigated as a technique to combine information for word-level CE. Performance improvements are shown using the sub-word-level information in linear-chain CRFs with appropriately engineered feature functions, as well as when applying the hidden-state CRF model at the word level.

Designing climate change mitigation plans that add up.

Mitigation plans to combat climate change depend on the combined implementation of many abatement options, but the options interact. Published anthropogenic emissions inventories are disaggregated by gas, sector, country, or final energy form. This allows the assessment of novel energy supply options, but is insufficient for understanding how options for efficiency and demand reduction interact. A consistent framework for understanding the drivers of emissions is therefore developed, with a set of seven complete inventories reflecting all technical options for mitigation connected through lossless allocation matrices. The required data set is compiled and calculated from a wide range of industry, government, and academic reports. The framework is used to create a global Sankey diagram to relate human demand for services to anthropogenic emissions. The application of this framework is demonstrated through a prediction of per-capita emissions based on service demand in different countries, and through an example showing how the "technical potentials" of a set of separate mitigation options should be combined.

Enhancing and developing the practical optimisation capabilities and intelligence of automatic design software

In the modern engineering design cycle the use of computational tools becomes a neces- sity. The complexity of the engineering systems under consideration for design increases dramatically as the demands for advanced and innovative design concepts and engineering products is expanding. At the same time the advancements in the available technology in terms of computational resources and power, as well as the intelligence of the design software, accommodate these demands and make them a viable approach towards the chal- lenge of real-world engineering problems. This class of design optimisation problems is by nature multi-disciplinary. In the present work we establish enhanced optimisation capabil- ities within the Nimrod/O tool for massively distributed execution of computational tasks through cluster and computational grid resources, and develop the potential to combine and benefit from all the possible available technological advancements, both software and hardware. We develop the interface between a Free Form Deformation geometry manage- ment in-house code with the 2D airfoil aerodynamic efficiency evaluation tool XFoil, and the well established multi-objective heuristic optimisation algorithm NSGA-II. A simple airfoil design problem has been defined to demonstrate the functionality of the design sys- tem, but also to accommodate a framework for future developments and testing with other state-of-the-art optimisation algorithms such as the Multi-Objective Genetic Algorithm (MOGA) and the Multi-Objective Tabu Search (MOTS) techniques. Ultimately, heav- ily computationally expensive industrial design cases can be realised within the presented framework that could not be investigated before. © 2012 by the authors. Published by the American Institute of Aeronautics and Astronautics, Inc.

Enhancing and developing the practical optimisation capabilities and intelligence of automatic design software

In the modern engineering design cycle the use of computational tools becomes a necessity. The complexity of the engineering systems under consideration for design increases dramatically as the demands for advanced and innovative design concepts and engineering products is expanding. At the same time the advancements in the available technology in terms of computational resources and power, as well as the intelligence of the design software, accommodate these demands and make them a viable approach towards the challenge of real-world engineering problems. This class of design optimisation problems is by nature multi-disciplinary. In the present work we establish enhanced optimisation capabilities within the Nimrod/O tool for massively distributed execution of computational tasks through cluster and computational grid resources, and develop the potential to combine and benefit from all the possible available technological advancements, both software and hardware. We develop the interface between a Free Form Deformation geometry management in-house code with the 2D airfoil aerodynamic efficiency evaluation tool XFoil, and the well established multi-objective heuristic optimisation algorithm NSGA-II. A simple airfoil design problem has been defined to demonstrate the functionality of the design system, but also to accommodate a framework for future developments and testing with other state-of-the-art optimisation algorithms such as the Multi-Objective Genetic Algorithm (MOGA) and the Multi-Objective Tabu Search (MOTS) techniques. Ultimately, heavily computationally expensive industrial design cases can be realised within the presented framework that could not be investigated before. ©2012 AIAA.

Depicting the future strategic plans of the Royal Australian Navy using a roadmapping framework as a visual composite canvas

Strategic planning can be an arduous and complex task; and, once a plan has been devised, it is often quite a challenge to effectively communicate the principal missions and key priorities to the array of different stakeholders. The communication challenge can be addressed through the application of a clearly and concisely designed visualisation of the strategic plan - to that end, this paper proposes the use of a roadmapping framework to structure a visual canvas. The canvas provides a template in the form of a single composite visual output that essentially allows a 'plan-on-a-page' to be generated. Such a visual representation provides a high-level depiction of the future context, end-state capabilities and the system-wide transitions needed to realise the strategic vision. To demonstrate this approach, an illustrative case study based on the Australian Government's Defence White Paper and the Royal Australian Navy's fleet plan will be presented. The visual plan plots the in-service upgrades for addressing the capability shortfalls and gaps in the Navy's fleet as it transitions from its current configuration to its future end-state vision. It also provides a visualisation of project timings in terms of the decision gates (approval, service release) and specific phases (proposal, contract, delivery) together with how these projects are rated against the key performance indicators relating to the technology acquisition process and associated management activities. © 2013 Taylor & Francis.

Tunneling transmission in two quantum wires coupled by a magnetically defined barrier

A numerical analysis of an electron waveguide coupler based on two quantum wires coupled by a magnetically defined barrier is presented with the use of the scattering-matrix method. For different geometry parameters and magnetic fields, tunneling transmission spectrum is obtained as a function of the electron energy. Different from that of conventional electron waveguide couplers, the transmission spectrum of the magnetically coupled quantum wires does not have the symmetry with regard to those geometrically symmetrical ports, It was found that the magnetic field in the coupling region drastically enhances the coupling between the two quantum wires for one specific input port while it weakens the coupling for the other input port. The results can be well understood by the formation of the edge states in the magnetically defined barrier region. Thus, whether these edge states couple or decouple to the electronic propagation modes in the two quantum wires, strongly depend on the relative moving directions of electrons in the propagating mode in the input port and the edge states in the magnetic region. This leads to a big difference in transmission coefficients between two quantum wires when injecting electrons via different input ports. Two important coupler specifications, the directivity and uniformity, are calculated which show that the system we considered behaves as a good quantum directional coupler. (C) 1997 American Institute of Physics.

practical type checking of functions defined on context-free languages

A type checking method for the functional language LFC is presented. A distinct feature of LFC is that it uses Context-Free (CF) languages as data types to represent compound data structures. This makes LFC a dynamically typed language. To improve efficiency, a practical type checking method is presented, which consists of both static and dynamic type checking. Although the inclusion relation of CF.languages is not decidable,a special subset of the relation is decidable, i.e., the sentential form relation, which can be statically checked.Moreover, most of the expressions in actual LFC programs appear to satisfy this relation according to the statistic data of experiments. So, despite that the static type checking is not complete, it undertakes most of the type checking task. Consequently the run-time efficiency is effectively improved. Another feature of the type checking is that it converts the expressions with implicit structures to structured representation. Structure reconstruction technique is presented.

pattern matching compilation of functions defined in context-free languages

LFC is a functional language based on recursive functions defined in context-free languages. In this paper, a new pattern matching algorithm for LFC is presented, which can represent a sequence of patterns as an integer by an encoding method. It is a rather simple method and produces efficient case-expressions for pattern matching definitions of LFC. The algorithm can also be used for other functional languages, but for nested patterns it may become complicated and further studies are needed.