Integrated optics for nulling interferometry in the thermal infrared

Modal filtering is based on the capability of single-mode waveguides to transmit only one complex amplitude function to eliminate virtually any perturbation of the interfering wavefronts, thus making very high rejection ratios possible in a nulling interferometer. In the present paper we focus on the progress of Integrated Optics in the thermal infrared [6-20 mu m] range, one of the two candidate technologies for the fabrication of Modal Filters, together with fiber optics. In conclusion of the European Space Agency's (ESA) "Integrated Optics for Darwin" activity, etched layers of clialcogenide material deposited on chalcogenide glass substrates was selected among four candidates as the technology with the best potential to simultaneously meet the filtering efficiency, absolute and spectral transmission, and beam coupling requirements. ESA's new "Integrated Optics" activity started at mid-2007 with the purpose of improving the technology until compliant prototypes can be manufactured and validated, expectedly by the end of 2009. The present paper aims at introducing the project and the components requirements and functions. The selected materials and preliminary designs, as well as the experimental validation logic and test benches are presented. More details are provided on the progress of the main technology: vacuum deposition in the co-evaporation mode and subsequent etching of chalcogenide layers. In addition., preliminary investigations of an alternative technology based on burying a chalcogenide optical fiber core into a chalcogenide substrate are presented. Specific developments of anti-reflective solutions designed for the mitigation of Fresnel losses at the input and output surface of the components are also introduced.

ENABLE: a wrist worn device with integrated accessible services to support old people living independently and safely at home

This RTD project, 2007-2009, is partly funded by the European Commission, in Framework Programme 6. It aims to assist elderly people for living well, independently and at case. ENABLE will provide a number of services for elderly people based on the new technology provided by mobile phones. The project is developing a Wrist unit with both integrated and external sensors, and with a radio frequency link to a mobile phone. Dedicated ENABLE software running on the wrist unit and mobile phone makes these services fully accessible for the elderly users. This paper outlines the fundamental motivation and the approach which currently is undertaken in order to collect the more detailed user needs and requirements. The general architecture and the design of the ENABLE system are outlined.

Tycho: a wide-area messaging framework with an integrated virtual registry

In a distributed environment remote entities, usually the producers or consumers of services, need a means to publish their existence so that clients, needing their services, can search and find the appropriate ones that they can then interact with directly. The publication of information is via a registry service, and the interaction is via a high-level messaging service. Typically, separate libraries provide these two services. Tycho is an implementation of a wide-area asynchronous messaging framework with an integrated distributed registry. This will free developers from the need to assemble their applications from a range of potentially diverse middleware offerings, which should simplify and speed application development and more importantly allow developers to concentrate on their own domain of expertise. In the first part of the paper we outline our motivation for producing Tycho and then review a number of registry and messaging systems popular with the Grid community. In the second part of the paper we describe the architecture and implementation of Tycho. In the third part of the paper we present and discuss various performance tests that were undertaken to compare Tycho with alternative similar systems. Finally, we summarise and conclude the paper and outline future work.

Collaborative grid infrastructure for molecular simulations: The eMinerals minigrid as a prototype integrated computer and data grid

This paper describes a prototype grid infrastructure, called the eMinerals minigrid, for molecular simulation scientists. which is based on an integration of shared compute and data resources. We describe the key components, namely the use of Condor pools, Linux/Unix clusters with PBS and IBM's LoadLeveller job handling tools, the use of Globus for security handling, the use of Condor-G tools for wrapping globus job submit commands, Condor's DAGman tool for handling workflow, the Storage Resource Broker for handling data, and the CCLRC dataportal and associated tools for both archiving data with metadata and making data available to other workers.

An improved reliability Cuk based solar inverter with sliding mode control

Many photovoltaic inverter designs make use of a buck based switched mode power supply (SMPS) to produce a rectified sinusoidal waveform. This waveform is then unfolded by a low frequency switching structure to produce a fully sinusoidal waveform. The Cuk SMPS could offer advantages over the buck in such applications. Unfortunately the Cuk converter is considered to be difficult to control using classical methods. Correct closed loop design is essential for stable operation of Cuk converters. Due to these stability issues, Cuk converter based designs often require stiff low bandwidth control loops. In order to achieve this stable closed loop performance, traditional designs invariably need large, unreliable electrolytic capacitors. In this paper, an inverter with a sliding mode control approach is presented which enables the designer to make use of the Cuk converters advantages, while ameliorating control difficulties. This control method allows the selection of passive components based predominantly on ripple and reliability specifications while requiring only one state reference signal. This allows much smaller, more reliable non-electrolytic capacitors to be used. A prototype inverter has been constructed and results obtained which demonstrate the design flexibility of the Cuk topology when coupled with sliding mode control.

Integrated motivational interviewing and cognitive behavioural therapy for people with psychosis and comorbid substance misuse: randomised controlled trial

Objectives To evaluate the effectiveness of integrated motivational interviewing and cognitive behaviour therapy in addition to standard care for patients with psychosis and a co-morbid substance use problem. Design Two-centre, open, rater-blind randomised controlled trial Setting UK Secondary Care Participants 327 patients with clinical diagnoses of schizophrenia, schizophreniform or schizoaffective disorder and DSM-IV diagnoses of drug and/or alcohol dependence or abuse Interventions Participants were randomly allocated to integrated motivational interviewing and cognitive behaviour therapy or standard care. Therapy has two phases. Phase one – “motivation building” – concerns engaging the patient, then exploring and resolving ambivalence for change in substance use. Phase two –“Action” – supports and facilitates change using cognitive behavioural approaches. Up to 26 therapy sessions were delivered over one year. Main outcomes The primary outcome was death from any cause or admission to hospital in the 12 months after therapy. Secondary outcomes were frequency and amount of substance use (Timeline Followback), readiness to change, perceived negative consequences of use, psychotic symptom ratings, number and duration of relapses, global assessment of functioning and deliberate self harm, at 12 and 24 months, with additional Timeline Followback assessments at 6 and 18 months. Analysis was by intention-to-treat with robust treatment effect estimates. Results 327 participants were randomised. 326 (99.7%) were assessed on the primary outcome, 246 (75.2%) on main secondary outcomes at 24 months. Regarding the primary outcome, there was no beneficial treatment effect on hospital admissions/ death during follow-up, with 20.2% (33/163) of controls and 23.3% (38/163) of the therapy group deceased or admitted (adjusted odds-ratio 1.16; P= 0.579; 95% confidence interval 0.68 to 1.99). For secondary outcomes there was no treatment effect on frequency of substance use or perceived negative consequences, but a statistically significant effect of therapy on amount used per substance-using day (adjusted odds-ratios: (a) for main substance 1.50; P=0.016; 1.08 to 2.09, (b) all substances 1.48; P=0.017; 1.07 to 2.05). There was a statistically significant treatment effect on readiness to change use at 12 months (adjusted odds-ratio 2.05; P=0.004; 1.26 to 3.31), not maintained at 24 months. There were no treatment effects on assessed clinical outcomes. Conclusions Integrated motivational interviewing and cognitive behaviour therapy for people with psychosis and substance misuse does not improve outcome in terms of hospitalisation, symptom outcomes or functioning. It does result in a reduction in amount of substance use which is maintained over the year’s follow up. Trial registration Current Controlled Trials: ISRCTN14404480

The implications of service-dominant logic and integrated solutions on the sales function

This study explores the implications of an organization moving toward service-dominant logic (S-D logic) on the sales function. Driven by its customers’ needs, a service orientation by its nature requires personal interaction and sales personnel are in an ideal position to develop offerings with the customer. However, the development of S-D logic may require sales staff to develop additional skills. Employing a single case study, the study identified that sales personnel are quick to appreciate the advantages of S-D logic for customer satisfaction and six specific skills were highlighted and explored. Further, three propositions were identified: in an organization adopting S-D logic, the sales process needs to elicit needs at both embedded-value and value-in-use levels. In addition, the sales process needs to coproduce not just goods and service attributes but also attributes of the customer’s usage processes. Further, the sales process needs to coproduce not just goods and service attributes but also attributes of the customer’s usage processes.