Planejamento, síntese e avaliação fotoprotetora de novos compostos híbridos derivados do resveratrol, cinamatos e avobenzona planejados como filtros solares

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reação de híbridos de milho à mancha-de-macrospora

Macrospora leaf spot, caused by the fungus Stenocarpella macrospora, has shown to be frequent and important among corn fields in Brazil. Genetic resistance is one of the main strategies to control corn leaf diseases. In Brazil, there is scarce information on the resistance of hybrids to Stenocarpella macrospora. The aim of this study was to evaluate the reaction of 25 corn hybrids to macrospora leaf spot. The experiment was conducted in 2011, in a greenhouse under controlled temperature and relative humidity conditions. Experimental design was completely randomized, with five replicates, each experimental unit consisting of a pot with five plants. Inoculation was done in the V2 growth stage (two fully expanded leaves), and the whorl of each plant received 2.0 mL suspension of 1.8 x 10(4) conidia mL-1 pathogen. The four used fungal isolates were obtained from infected crop residues at the municipalities Lages and Quilombo, Santa Catarina State, and Campinas do Sul and Vacaria, Rio Grande do Sul State. Disease severity was assessed at 21 days after inoculation in the V4 stage (four fully expanded leaves). No tested hybrid was totally resistant to the fungus S. macrospora. There was a significant difference in the disease severity between hybrids and fungal isolates. Hybrids inoculated with Quilombo isolate showed four reaction groups, while the isolates Vacaria, Lages and Campinas do Sul showed two groups. Some hybrids had varied behaviors against the isolates, suggesting different aggressiveness levels. There were hybrids that showed similar reaction to the isolates, suggesting greater stability for macrospora leaf spot.

Comportamento de híbridos de milho transgênicos e respectivos híbridos isogênicos convencionais em relação à infestação de Spodoptera Frugiperda (j. E. Smith,1727) (Lepidoptera: Noctuidae) em duas localidades e épocas de semeadura

The fall armyworm Spodoptera frugiperda is one of the most important pests of maize. Various studies are conducted for their management, integrating chemical and biological control tactics as well as resistant plants. In order to offer alternatives for an efficient management of this pest with minimal use of pesticides, the technology of genetically modified plants resistant to insects has been widely studied. The aim of the present study was to evaluate the natural infestation of larvae of S. frugiperda and their injuries under field conditions in transgenic maize hybrids compared to their conventional isogenic counterparts at two sowing dates and two regions. The hybrids were planted in the off season of 2010 in Jaboticabal, SP, Brazil, and the summer of 2010/2011 in Jaboticabal, and Pindorama, SP, in a randomized block with seven treatments (hybrids) and four replications. Different levels of infestation of larvae occurred throughout the phenological development of plants in conventional and genetically modified hybrids with significant differences between the two groups in most evaluations. The hybrid 2B710HX was the least infested with caterpillars and had the least damaged leaf area. It follows that the Cry1F toxin was the most effective in protecting the plant in relation to other toxic proteins expressed by the other Bt hybrids against infestation and damage promoted by this pest, regardless of time of sowing.

Crescimento de Brachiaria plantaginea e Raphanus raphanistrum em convivência com híbridos de milho submetidos a períodos de controle das plantas daninhas

The objective of this experiment was to evaluate the effects of corn hybrid cultivation and weed control periods on the population and growth of the weeds B. plantaginea and R. raphanistrum. The trial was set at Universidade Estadual the São Paulo (UNESP), Botucatu Campus, São Paulo - Brazil. A completely randomized block design with four replications was used. The treatments were arranged in a factorial scheme with four corn hybrids (C701, DINA170, XL678, and C125) and four manual weed control periods [a. 15 days after emergence (DAE); b. 15 and 30 DAE; c. 15, 30 and 45 DAE, and d. weedy]. The hybrids DINA170 and C125 significantly decreased the density of B. plantaginea. The hybrids C701, DINA170 and XL678 affected the growth of the plants, but they did not affect the emergence of new plants of R. raphanistrum. Hand-hoeing at 15 DAE decreased the dry matter weight of the weeds B. lantaginea and R. raphanistrum by 93.1%, 95.4% and 89.2%, respectively, at harvest of the four hybrids.

Desenvolvimento de sistemas multifuncionais baseados em híbridos orgânico-inorgânicos dopados

Pós-graduação em Química - IQ

Síntese e avaliação farmacológica de novos compostos híbridos úteis para tratamento das complicaçôes da anemia falciforme

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Acúmulo de matéria seca e nutrientes de híbridos de sorgo sacarino em condições de safrinha em Selvíria-MS

Pós-graduação em Agronomia - FEIS

Influência da Espessura nas Propriedades Mecânicas de Compósitos Híbridos Interlaminares de Curauá/Vidro/Poliéster

The interest in the use of vegetable fibers (e.g. jute, sisal and curaua) for more noble applications, such as reinforcement in polymeric composite materials, has increased over the years due to a variety of aspects, especially those related to environmental legislation and community awareness regarding the life cycle of products. In this context, the aim of this work is to develop hybrid interlaminate curaua/glass/insaturated polyester composites by hot compression molding and to analyze their mechanical properties as a function of the thickness of the laminate. The short beam strength of the thickest sample decreased due to its higher void content. Furthermore, the thinnest sample showed lower hardness, and lower impact, tensile and Iosipescu shear strength, partly attributed to its lower fiber volumetric fraction. Thus, in general, the most adequate laminate was the one comprising eight layers, four of which were of glass fiber and four of curaua fiber, but only if flexural loading is not critical.

Demanda energética na colheita de híbridos de milho para silagem em função do estádio de maturidade e tamanho de partícula

Corn is the crop most used for making silage. The efficiency of the process should also be evaluated by cost per kg of dry matter harvested (kgDM). The objective of this study was to evaluate energy consumption in the harvest of corn hybrids for silage depending on the texture of the hybrid, four and three harvest maturities of particle sizes - Tp was used a tractor Massey Ferguson MF 610 model 86 cv. Cutting and harvesting the forage harvester is used model JF92 Z10. To obtain data on fuel consumption (CC) and time spent for each plot, we used a flow meter, installed near the fuel filter of the tractor. The experimental design was completely randomized in a split plot. The interaction between factors triple stage hybrid * Harvest * Tp. The velocity and displacement of the tractor were different for the maturities for hybrid hard texture. The CC schedule for hybrid dent increased harvest maturity earlier and at lower Tp. Consumption was lower by kgDM later maturity, hard texture and bite respectively. The theoretical power was higher in earlier maturity and yield were higher for hybrid hard texture in the most advanced. The CC was lower in late maturity and the hybrid hard texture can be used for silage in relation to the Cc and income in later maturity in higher Tp.

Marcadores moleculares na identificação de híbridos e introgressão genética em populações de Pseudoplatystoma corruscans e Pseudoplatystoma reticulatim

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reação de genótipos e híbridos de tomateiro à Meloidogyne enterolobii

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eficácia de duas formulações de vacinas autógenas para o controle da lactococose em surubins híbridos Pseudoplatystoma corruscans x Pseudoplatystoma reticulatum

Pós-graduação em Aquicultura - FCAV

Estresse hídrico e osmocondicionamento de sementes de espécies e híbridos de eucalipto

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Avaliação da incorporação e liberação de fármacos em materiais híbridos ureasil-poliéter

Sistemas de liberação controlada são formas farmacêuticas que visam aumentar a eficácia terapêutica, a segurança do tratamento e a adesão dos pacientes. Neste contexto, as matrizes poliméricas, que buscam controlar o perfil de liberação de um fármaco, surgem como opção. Assim surge a necessidade de desenvolver e analisar materiais multifuncionais, que apresentem características superiores a dos materiais poliméricos comuns, como os híbridos orgânico-inorgânicos. Esse projeto teve como objetivo analisar a capacidade de incorporação e liberação “in vitro” dos fármacos cloridrato de pramoxina e acetato de dexametasona em sistemas híbridos orgânico-inorgânicos. As amostras foram preparadas utilizando misturas em diferentes proporções de materiais híbridos ureasil-polioxietileno (POE-1900) que possui um caráter altamente hidrofílico e ureasil-polioxipropileno (POP-400) com caráter altamente hidrofóbico. A partir dessas misturas pode-se controlar o balanço hidrofílico/hidrofóbico das matrizes híbridas, permitindo avaliar o comportamento desses sistemas, frente a incorporação de fármacos tanto hidrofílicos, como hidrofóbicos. Os testes de incorporação revelaram a capacidade desses materiais de incorporar os fármacos cloridrato de pramoxina e acetato de dexametasona em concentrações relativamente altas (20% m/m e 3% m/m, respectivamente) se comparado a formulações hoje presentes no mercado. Utilizando as diferentes proporções dos precursores POE-1900 e POP-400 foi possível modular o perfil de liberação dos fármacos, sendo que as amostras com maiores proporções do POP-400 tiveram uma liberação mais retardada, devido hidrofobicidade do material. As amostras contendo a dexametasona (hidrofóbico) apresentaram uma liberação mais lenta, constante e gradual se comparado a pramoxina (hidrofílico).

Estudo do potencial de associações de ZnO com os produtos naturais ácido cafeico e ferúlico como filtros solares híbridos: [recurso eletrônico]

In this work were studied associations of ZnO with the natural products caffeic and feluric acids. Two preparation methods were used, that is, the sol-gel and a reflux procedure. In the sol-gel method, ZnO is produced by the basics hydrolysis of precursors in the presence of the organic filters (caffeic and feluric acids), which results in 30 nm (or less) ZnO particles with the organic filters (in dissociated form) bonded to the surface of ZnO. In the reflux method, a dispersion of ZnO in a water/ethanol mixture was kept under reflux (50oC/4h) in the presence of the organic acids. The ZnO particles used in the reflux method have a higher diameter than sol-gel ZnO particles, but the prepared associated product ZnO/Organic acids were similar. Despite of the difference in relation to crystallinity between the products, the preparation methods resulted in analogous associations with respect to the interaction of the organic filters with the ZnO surface. The caffeic/ZnO associations presented low photostability, which lead to the degradation of the organic filter. The other associations (feluric acid/ZnO) presented satisfactory results. The FT-IR spectroscopy confirmed the formation of the association, and the nature of the bond formed compared with the Zn-O bond in Zn2+/Felutic acid complexes. The isolated organic and inorganic filters, along with the associations were analyzed by diffuse reflectance spectroscopy and Uv-vis spectroscopy. The absorption edges and the critical wavelengths were analyzed and the effects of Zn-O bonds in feluric acid/ZnO associations described as a function of the relative position of the π/π* system of the organic filter. Finally the performance of the hybrid filters were investigated in terms of the absorption of UVA and UVB radiations, with the UVA/UVB ratio, an efficiency parameter largely used in the description of solar filters, sunscreen and suncare products