Quantity-quality simulation (QQS) : a detailed continuous planning model for urban runoff control /

Mode of access: Internet.

Inventory parameter management and focused continuous improvement for repetitive batch manufacturers

What this thesis proposes is a methodology to assist repetitive batch manufacturers in the adoption of certain aspects of the Lean Production principles. The methodology concentrates on the reduction of inventory through the setting of appropriate batch sizes, taking account of the effect of sequence dependent set-ups and the identification and elimination of bottlenecks. It uses a simple Pareto and modified EBQ based analysis technique to allocate items to period order day classes based on a combination of each item's annual usage value and set-up cost. The period order day classes the items are allocated to are determined by the constraints limits in the three measured dimensions, capacity, administration and finance. The methodology overcomes the limitations associated with MRP in the area of sequence dependent set-ups, and provides a simple way of setting planning parameters taking this effect into account by concentrating on the reduction of inventory through the systematic identification and elimination of bottlenecks through set-up reduction processes, so allowing batch sizes to reduce. It aims to help traditional repetitive batch manufacturers in a route to continual improvement by: Highlighting those areas where change would bring the greatest benefits. Modelling the effect of proposed changes. Quantifying the benefits that could be gained through implementing the proposed changes. Simplifying the effort required to perform the modelling process. It concentrates on increasing flexibility through managed inventory reduction through rationally decreasing batch sizes, taking account of sequence dependent set-ups and the identification and elimination of bottlenecks. This was achieved through the development of a software modelling tool, and validated through a case study approach.

Environmental quality in residential areas : a social survey approach to improvement priorities

The research is concerned with the measurement of residents' evaluations of the environmental quality of residential areas. The research reflects the increased attention being given to residents' values in planning decisions affecting the residential environment. The work was undertaken in co-operation with a local authority which was in the process of revising its housing strategy, and in particular the priorities for improvement action. The study critically examines the existing evidence on environmental values and their relationship to the environment and points to a number of methodological and conceptual deficiencies. The research strategy developed on the basis of the research review was constrained by the need to keep any survey methods simple so that they could easily be repeated, when necessary, by the sponsoring authority. A basic perception model was assumed, and a social survey carried out to measure residents' responses to different environmental conditions. The data was only assumed to have ordinal properties, necessitating the extensive use of non-parametric statistics. Residents' expressions of satisfaction with the component elements of the environment (ranging from convenience to upkeep and privacy) were successfully related to 'objective' measures of the environment. However the survey evidence did not justify the use of the 'objective' variables as environmental standards. A method of using the social survey data directly as an aid to decision-making is discussed. Alternative models of the derivation of overall satisfaction with the environment are tested, and the values implied by the additive model compared with residents' preferences as measured directly in the survey. Residents' overall satisfactions with the residential environment were most closely related to their satisfactions with the "Appearance" and the "Reputation" of their areas. By contrast the most important directly measured preference was "Friendliness of area". The differences point to the need to define concepts used in social research clearly in operational terms, and to take care in the use of values 'measured' by different methods.

Achieving continuous improvement through self-assessment

In 2007 the UK Office of Government Commerce was mandated to carry out Procurement Capability Reviews (PCR) across the 16 top spending UK Government Departments. Since then, this programme has evolved into a self assessment based approach which is markedly different from the original approach. Will the move from a centre-led strategic review of procurement capability to a department-led model based on self assessment continue to strengthen and improve procurement capability across Central Civil Government? OGC is currently working with UK Government Departments to carry out their PCRs using a self-assessment tool which incorporates qualitative and quantitative measures. Results are generated based on a capability maturity model. The results are assured independently. OGC expectations are that tangible and measurable capability improvements will be realised when departments embed the self-assessment model and implement the findings as part of a continuous improvement regime. This paper is a case study, using some relevant literature to reflect on past and possible future development of the PCR self assessment scheme.

Process improvement and quality management systems in the financial services industry:the case for the OPEX quality management system and framework

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Does audit improve quality in a hospital manufacturing unit?

OBJECTIVE - To establish whether auditing improves the overall quality of a hospital manufacturing unit. DESIGN - Continuous assessment of the quality level of a hospital manufacturing unit using 14 quality indicators over a nine-month period, and two periods of audit carried out towards the beginning and end of the assessment period. SETTING - The non-sterile manufacturing, sterile manufacturing and repackaging services areas at the pharmacy manufacturing unit at Queens Hospital, Burton-on- Trent. RESULTS - Compliance ratings for the second audit were better than those for the first audit, but there was no overall improvement in quality over the study period. CONCLUSION - Auditing probably improves compliance by focusing the minds of the staff involved, rather than by initiating a sustained improvement in overall quality.

Equipment quality control

Mammography equipment must be evaluated to ensure that images will be of acceptable diagnostic quality with lowest radiation dose. Quality Assurance (QA) aims to provide systematic and constant improvement through a feedback mechanism to address the technical, clinical and training aspects. Quality Control (QC), in relation to mammography equipment, comprises a series of tests to determine equipment performance characteristics. The introduction of digital technologies promoted changes in QC tests and protocols and there are some tests that are specific for each manufacturer. Within each country specifi c QC tests should be compliant with regulatory requirements and guidance. Ideally, one mammography practitioner should take overarching responsibility for QC within a service, with all practitioners having responsibility for actual QC testing. All QC results must be documented to facilitate troubleshooting, internal audit and external assessment. Generally speaking, the practitioner’s role includes performing, interpreting and recording the QC tests as well as reporting any out of action limits to their service lead. They must undertake additional continuous professional development to maintain their QC competencies. They are usually supported by technicians and medical physicists; in some countries the latter are mandatory. Technicians and/or medical physicists often perform many of the tests indicated within this chapter. It is important to recognise that this chapter is an attempt to encompass the main tests performed within European countries. Specific tests related to the service that you work within must be familiarised with and adhered too.

Obstruction and infiltration: a proposal of a quality indicator.

Background The quest for continuous improvement of the quality of provided care is the objective of nursing care. However, the insertion and permanence of a peripheral venous catheter has been associated to complications, thus making a systematic evaluation of the performance of professionals and the management of health services important. Objective: Analyse complications that caused removal of intravenous catheters. Methods A prospective study with 64 patients of a health service of Portugal, from July to September/2015. Included patients with age 18 years, with a peripheral venous catheter. Descriptive analysis using SPSS. Ethical requirements were met. Results Two hundred three (203) intravenous catheters, in 64 patients, most elderly (section 95.3 %), with mean age of 80 years were evaluated. The catheters remained inserted between one and 12 days (mean 2 days), 66 % of the devices were removed because of complications, such as: removal by the patient (17.7 %), obstruction (17.2 %), infiltration (14.8 %), phlebitis (9.4 %) and fluid exiting the insertion site (6.4 %). The prevalence of obstruction and infiltration per patient was respectively 36 % and 39 %. Conclusions Obstruction and infiltration were the complications of higher prevalence that led to the removal and reinsertion of a new peripheral venous catheter with the possibility of increased pain, infection and hospital costs. Faced with the risk of compromising patient safety and being able to contribute to the improvement of health care, we suggest the inclusion of obstruction and infiltration in the indicators of quality of care, in order to have systematic evaluation of results, (re)plan and implement preventive measures.

Effects of rainfall on water quality in six sequentially disposed fishponds with continuous water flow

O estudo foi efetuado durante o período de chuva (dezembro-fevereiro) em seis viveiros de produção semi-intensiva de peixes, a fim de avaliar o efeito da chuva na qualidade da água de viveiros que apresentam fluxo contínuo de água, a qual é passada de um viveiro para outro sem tratamento prévio. Foram amostrados oito pontos de coleta nas saídas dos viveiros. O viveiro P1 (próximo à nascente) apresentou as menores concentrações físicas e químicas da água e as maiores no viveiro P4 (considerado um ponto crítico recebendo material alóctone proveniente de outros viveiros e do escoamento do setor de criação de rãs). A disposição seqüencial dos viveiros estudados promoveu aumento nas concentrações dos nutrientes, clorofila-a e condutividade. As chuvas características desta época do ano aumentaram o fluxo de água nos viveiros e conseqüentemente, carreando material particulado e dissolvido de um viveiro para outro e, promovendo um aumento das variáveis limnológicas em direção do P3 ao P6. Os resultados sugerem que a chuva no período de estudo afetou positivamente a qualidade da água dos viveiros estudados, porém, como os sistemas analisados estão dispostos em distribuição seqüencial e escoamento constante da água de viveiros e tanques paralelos sem tratamento prévio, cuidados devem ser averiguados para que o aumento do fluxo de água provocado pelas chuvas não tenha efeito adverso nos viveiros estudados.

Natural ventilation and indoor air quality in educational buildings: experimental assessment and improvement strategies

Indoor environmental conditions in classrooms, in particular temperature and indoor air quality, influence students’ health, attitude and performance. In recent years, several studies regarding indoor environmental quality of classrooms were published and natural ventilation proved to have great potential, particularly in southern European climate. This research aimed to evaluate indoor environmental conditions in eight schools and to assess their improvement potential by simple natural ventilation strategies. Temperature, relative humidity and carbon dioxide concentration were measured in 32 classrooms. Ventilation performance of the classrooms was characterized using two techniques, first by fan pressurization measurements of the envelope airtightness and later by tracer gas measurements of the air change rate assuming different envelope conditions. A total of 110 tracer gas measurements were made and the results validated ventilation protocols that were tested afterward. The results of the ventilation protocol implementation were encouraging and, overall, a decrease on the CO2 concentration was observed without modifying the comfort conditions. Nevertheless, additional measurements must be performed for winter conditions.