Using Multi-Objective Optimization To Maximize Multiple Benefits For Sustainable Drainage Design

For many years, drainage design was mainly about providing sufficient network capacity. This traditional approach had been successful with the aid of computer software and technical guidance. However, the drainage design criteria had been evolving due to rapid population growth, urbanisation, climate change and increasing sustainability awareness. Sustainable drainage systems that bring benefits in addition to water management have been recommended as better alternatives to conventional pipes and storages. Although the concepts and good practice guidance had already been communicated to decision makers and public for years, network capacity still remains a key design focus in many circumstances while the additional benefits are generally considered secondary only. Yet, the picture is changing. The industry begins to realise that delivering multiple benefits should be given the top priority while the drainage service can be considered a secondary benefit instead. The shift in focus means the industry has to adapt to new design challenges. New guidance and computer software are needed to assist decision makers. For this purpose, we developed a new decision support system. The system consists of two main components – a multi-criteria evaluation framework for drainage systems and a multi-objective optimisation tool. Users can systematically quantify the performance, life-cycle costs and benefits of different drainage systems using the evaluation framework. The optimisation tool can assist users to determine combinations of design parameters such as the sizes, order and type of drainage components that maximise multiple benefits. In this paper, we will focus on the optimisation component of the decision support framework. The optimisation problem formation, parameters and general configuration will be discussed. We will also look at the sensitivity of individual variables and the benchmark results obtained using common multi-objective optimisation algorithms. The work described here is the output of an EngD project funded by EPSRC and XP Solutions.

Evaluating And Optimizing Sustainable Drainage Design To Maximize Multiple Benefits: Case Studies In China

In the past, the focus of drainage design was on sizing pipes and storages in order to provide sufficient network capacity. This traditional approach, together with computer software and technical guidance, had been successful for many years. However, due to rapid population growth and urbanisation, the requirements of a “good” drainage design have also changed significantly. In addition to water management, other aspects such as environmental impacts, amenity values and carbon footprint have to be considered during the design process. Going forward, we need to address the key sustainability issues carefully and practically. The key challenge of moving from simple objectives (e.g. capacity and costs) to complicated objectives (e.g. capacity, flood risk, environment, amenity etc) is the difficulty to strike a balance between various objectives and to justify potential benefits and compromises. In order to assist decision makers, we developed a new decision support system for drainage design. The system consists of two main components – a multi-criteria evaluation framework for drainage systems and a multi-objective optimisation tool. The evaluation framework is used for the quantification of performance, life-cycle costs and benefits of different drainage systems. The optimisation tool can search for feasible combinations of design parameters such as the sizes, order and type of drainage components that maximise multiple benefits. In this paper, we will discuss real-world application of the decision support system. A number of case studies have been developed based on recent drainage projects in China. We will use the case studies to illustrate how the evaluation framework highlights and compares the pros and cons of various design options. We will also discuss how the design parameters can be optimised based on the preferences of decision makers. The work described here is the output of an EngD project funded by EPSRC and XP Solutions.

Uniformidade de deposição da calda de pulverização de herbicidas em barra lateral protegida com diferentes combinações de pontas de pulverização

O presente trabalho objetivou estudar a uniformidade de distribuição da calda de pulverização contendo herbicidas, em culturas perenes arbustivas, utilizando combinações de pontas de pulverização em barra lateral protegida, conduzida a pequena distância do alvo, na linha de culturas perenes arbustivas. Para isso, foi desenvolvido um programa computacional que permite simular a sobreposição do leque de pulverização, da porção protegida da barra e do leque formado pela ponta de pulverização do bico mais extremo da barra, de modo diferente dos demais programas. Após a seleção das melhores combinações de pontas de pulverização por meio de simulação dos padrões de deposição da pulverização das pontas individuais e dos coeficientes de variação menores que 10%, algumas dessas combinações foram testadas em campo, aplicando-se um herbicida sistêmico (glyphosate) e outro com ação de contato (paraquat). Os resultados indicaram que o programa computacional desenvolvido pode constituir-se em um auxiliar valioso para a seleção das melhores combinações de pontas de pulverização. em aplicações tanto do herbicida glyphosate quanto do paraquat, com volumes de calda mais reduzidos,abaixo de 100 L ha-1, destacaram-se como arranjos mais eficientes: a) pontas TT110015 distanciadas de 52,5 cm entre si, combinadas com a ponta TK-0,5 na extremidade da barra a 50 cm do último bico, operando na velocidade de 5 km h-1 e pressão de 103 kPa (15 lbf pol-2), com distância de caminhamento do tronco da árvore de 20 cm ; b) pontas SMCE2 distanciadas de 15 cm entre si, combinadas com a ponta TK-0,5 na extremidade da barra de 20 cm do último bico, operando na velocidade de 4 km h-1 e pressão de 414 kPa (60 lbf pol-2), com distância de caminhamento do tronco da árvore de 30 cm ; e c) pontas TLX-2 distanciadas de 15 cm entre si, combinadas com a ponta TK-0,5 na extremidade da barra de 20 cm do último bico, operando à velocidade de 5 km h-1 e pressão de 414 kPa (60 lbf pol-2), com distância de caminhamento do tronco da árvore de 30 cm. A velocidade de deslocamento do pulverizador de 5 km h-1 proporcionou melhores condições para que os herbicidas estudados apresentassem melhor controle de plantas daninhas, quando comparada com a velocidade de deslocamento do pulverizador de 4 km h-1.

A Management Tool for the Replication of Operating Systems in Wireless Communication Networks

To simplify computer management, various administration systems based on wired connections adopt advanced techniques to manage software configuration. Nevertheless, the strong relation between hardware and software makes for an individualism of that management, besides penalizing computational mobility and ubiquity. All these issues lead to degradation of scalability, flexibility and the facility to install and maintain distributed applications. This article presents an environment for centralized wireless communication network management, named WSE-OS (Wireless Sharing Environment - Operating Systems): a model based on Virtual Desktop Infrastructure (VDI) which associates virtualization techniques and safe remote access systems to create a distributed architecture as a base for a managing system. WSE-OS is capable of accomplishing the replication of operating system images using wireless communication network, besides offering abstraction of hardware to its clients, making the management more flexible and independent of wired connections. Results obtained from this work indicate that WSE-OS allows disseminating, through a single software configuration, the execution of data related to operating system images in client computers. WSE-OS can also be used as a management tool for operating systems in a wireless network.

Photoelastic Stress Analysis in Screwed and Cemented Implant-Supported Dentures With External Hexagon Implants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of Impression Accuracy for Implant at Various Angulations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)