Physical and Chemical Performance Testing of Ontario Asphalt Pavements

Thermal and fatigue cracking are the two of the major pavement distress phenomena that contribute significantly towards increased premature pavement failures in Ontario. This in turn puts a massive burden on the provincial budgets as the government spends huge sums of money on the repair and rehabilitation of roads every year. Governments therefore need to rethink and re-evaluate their current measures in order to prevent it in future. The main objectives of this study include: the investigation of fatigue distress of 11 contract samples at 10oC, 15oC, 20oC and 25oC and the use of crack-tip-opening-displacement (CTOD) requirements at temperatures other than 15oC; investigation of thermal and fatigue distress of the comparative analysis of 8 Ministry of Transportation (MTO) recovered and straight asphalt samples through double-edge-notched-tension test (DENT) and extended bending beam rheometry (EBBR); chemical testing of all samples though X-ray Fluorescence (XRF) and Fourier transform infrared analysis (FTIR); Dynamic Shear Rheometer (DSR) higher and intermediate temperature grading; and the case study of a local Kingston road. Majority of 11 contract samples showed satisfactory performance at all temperatures except one sample. Study of CTOD at various temperatures found a strong correlation between the two variables. All recovered samples showed poor performance in terms of their ability to resist thermal and fatigue distress relative to their corresponding straight asphalt as evident in DENT test and EBBR results. XRF and FTIR testing of all samples showed the addition of waste engine oil (WEO) to be the root cause of pavement failures. DSR high temperature grading showed superior performance of recovered binders relative to straight asphalt. The local Kingston road showed extensive signs of damage due to thermal and fatigue distress as evident from DENT test, EBBR results and pictures taken in the field. In the light of these facts, the use of waste engine oil and recycled asphalt in pavements should be avoided as these have been shown to cause premature failure in pavements. The DENT test existing CTOD requirements should be implemented at other temperatures in order to prevent the occurrences of premature pavement failures in future.

Étude comparative de la mémoire de source et des faux souvenirs dans la maladie d’Alzheimer et la maladie de Parkinson avec et sans démence

Dans les dernières années, les études sur les maladies neurodégénératives telles que la maladie d’Alzheimer (MA) et la maladie de Parkinson sans démence (MP) et avec démence (MPD) ont été nombreuses, mais la différenciation de ces patients sur la base de leur profil cognitif doit être encore améliorée. Effectivement, l’évaluation clinique peut s’avérer difficile en raison du peu de spécificité dans la présentation de leurs déficits neuropsychologiques. Ceci s’explique par la variabilité et le chevauchement des processus cliniques et pathologiques affectant essentiellement les mêmes régions/fonctions, soit celles liées aux lobes temporaux médians (LTM)/Mémoire (fonction LTM/Mémoire) et aux lobes frontaux (LF)/Fonctions exécutives (fonction LF/Exécutive). Toutefois, il existerait une distinction critique au niveau de l’intégrité relative de ces fonctions dans ces maladies neurodégénératives, ce qui permettrait d’identifier des déficits cognitifs spécifiques à la MA, la MP et la MPD. La présente thèse s’inscrit dans cette volonté de caractériser les profils cognitifs propres à la MA, la MP et la MPD, plus précisément par l’étude novatrice de la mémoire de source et des faux souvenirs. Les quatre chapitres qui composent cette thèse servent donc à documenter la nature de ces mécanismes mnésiques, leurs patrons de performance spécifiques dans la MA, la MP et la MPD, et leur sensibilité aux atteintes des fonctions LTM/Mémoire et LF/Exécutive. Ainsi, le Chapitre I démontre la pertinence d’étudier la mémoire de source et les faux souvenirs dans la MA, la MP et la MPD, en décrivant leurs interactions avec les fonctions LTM/Mémoire et LF/Exécutive, toutes les deux atteintes dans ces maladies. Le Chapitre II, présenté sous forme d’article, révèle des déficits en mémoire de source chez des patients MP, mais seulement dans l’une des tâches employées. Également, malgré des atteintes des fonctions LF/Exécutive et LTM/Mémoire, il est démontré que seule la fonction LTM/Mémoire est liée à l’altération de la mémoire de source chez les patients MP. Le Chapitre III, également sous forme d’article, illustre un taux anormal de faux souvenirs chez des patients MA, tandis que chez des patients MP et MPD, il est démontré qu’ils ont un taux de faux souvenirs comparable à celui des participants contrôles. Il est également rapporté que malgré l’atteinte de la fonction LF/Exécutive chez les patients MA, MP et MPD, elle est seulement liée à l’augmentation des faux souvenirs chez les patients MA. Finalement, dans le dernier Chapitre (IV), les résultats obtenus sont discutés dans leur ensemble à la lumière des prédictions et connaissances actuelles, tout en identifiant les limites afin d’orienter les perspectives de recherche.

L’innovation de modèle d’affaires exploitant les technologies de l’information et de la communication -contribution à la compréhension du lien entre TIC et performance

Les entreprises qui se servent des technologies de l’information et de la communication (TIC) pour innover mesurent des impacts très inégaux sur leurs performances. Cela dépend principalement de l’intensité, l’ampleur et la cohérence de l’innovation systémique auxquelles elles procèdent. En l’état de la connaissance, la littérature identifie le besoin de mieux comprendre cette notion d’alignement systémique. Cette thèse propose d’aborder cette question à l’aide de la notion d’innovation du modèle d’affaires. Une revue systématique de la littérature a été réalisée. D’un point de vue conceptuel, elle contribue à mieux définir le concept de modèle d’affaires, et a permis de réaliser une typologie des différents cadres de modélisation d’affaires. Le cadre conceptuel qui en est issu aborde le sujet de l’innovation du modèle d’affaires à trois niveaux : (1) stratégique à travers la proposition d’une matrice de positionnement de l’innovation de modèle d’affaires et l’identification de trajectoires d’innovation ; (2) configuration du modèle d’affaires à l’aide du cadre de modélisation tétraédrique de Caisse et Montreuil ; et (3) opérationnel-tactique par l’analyse des facteurs clés de succès et des chaines structurantes. Du fait du caractère émergeant de la littérature sur le sujet, la méthodologie choisie est une étude de cas comparés. Trois études de cas d’entreprises québécoises ont été réalisées. Elles oeuvrent dans des secteurs variés, et ont procédé à une innovation significative de leur modèle d’affaires en s’appuyant sur des TIC,. La recherche conclut à la pertinence de l’utilisation du concept de modèle d’affaires en ce qui concerne l’analyse de l’alignement systémique dans un contexte d’innovation appuyée sur les TIC. Neuf propositions de recherche sont énoncées et ouvrent la voie à de futures recherches

The Performance Characteristics of a Surface-Modified Cutting Tool

In the past, many papers have been presented which show that the coating of cutting tools often yields decreased wear rates and reduced coefficients of friction. Although different theories are proposed, covering areas such as hardness theory, diffusion barrier theory, thermal barrier theory, and reduced friction theory, most have not dealt with the question of how and why the coating of tool substrates with hard materials such as Titanium Nitride (TiN), Titanium Carbide (TiC) and Aluminium Oxide (Al203) transforms the performance and life of cutting tools. This project discusses the complex interrelationship that encompasses the thermal barrier function and the relatively low sliding friction coefficient of TiN on an undulating tool surface, and presents the result of an investigation into the cutting characteristics and performance of EDMed surface-modified carbide cutting tool inserts. The tool inserts were coated with TiN by the physical vapour deposition (PVD) method. PVD coating is also known as Ion-plating which is the general term of the coating method in which the film is created by attracting ionized metal vapour in this the metal was Titanium and ionized gas onto negatively biased substrate surface. Coating by PVD was chosen because it is done at a temperature of not more than 5000C whereas chemical Vapour Deposition CVD process is done at very high temperature of about 8500C and in two stages of heating up the substrates. The high temperatures involved in CVD affects the strength of the (tool) substrates. In this study, comparative cutting tests using TiN-coated control specimens with no EDM surface structures and TiN-coated EDMed tools with a crater-like surface topography were carried out on mild steel grade EN-3. Various cutting speeds were investigated, up to an increase of 40% of the tool manufacturer’s recommended speed. Fifteen minutes of cutting were carried out for each insert at the speeds investigated. Conventional tool inserts normally have a tool life of approximately 15 minutes of cutting. After every five cuts (passes) microscopic pictures of the tool wear profiles were taken, in order to monitor the progressive wear on the rake face and on the flank of the insert. The power load was monitored for each cut taken using an on-board meter on the CNC machine to establish the amount of power needed for each stage of operation. The spindle drive for the machine is an 11 KW/hr motor. Results obtained confirmed the advantages of cutting at all speeds investigated using EDMed coated inserts, in terms of reduced tool wear and low power loads. Moreover, the surface finish on the workpiece was consistently better for the EDMed inserts. The thesis discusses the relevance of the finite element method in the analysis of metal cutting processes, so that metal machinists can design, manufacture and deliver goods (tools) to the market quickly and on time without going through the hassle of trial and error approach for new products. Improvements in manufacturing technologies require better knowledge of modelling metal cutting processes. Technically the use of computational models has a great value in reducing or even eliminating the number of experiments traditionally used for tool design, process selection, machinability evaluation, and chip breakage investigations. In this work, much interest in theoretical and experimental investigations of metal machining were given special attention. Finite element analysis (FEA) was given priority in this study to predict tool wear and coating deformations during machining. Particular attention was devoted to the complicated mechanisms usually associated with metal cutting, such as interfacial friction; heat generated due to friction and severe strain in the cutting region, and high strain rates. It is therefore concluded that Roughened contact surface comprising of peaks and valleys coated with hard materials (TiN) provide wear-resisting properties as the coatings get entrapped in the valleys and help reduce friction at chip-tool interface. The contributions to knowledge: a. Relates to a wear-resisting surface structure for application in contact surfaces and structures in metal cutting and forming tools with ability to give wear-resisting surface profile. b. Provide technique for designing tool with roughened surface comprising of peaks and valleys covered in conformal coating with a material such as TiN, TiC etc which is wear-resisting structure with surface roughness profile compose of valleys which entrap residual coating material during wear thereby enabling the entrapped coating material to give improved wear resistance. c. Provide knowledge for increased tool life through wear resistance, hardness and chemical stability at high temperatures because of reduced friction at the tool-chip and work-tool interfaces due to tool coating, which leads to reduced heat generation at the cutting zones. d. Establishes that Undulating surface topographies on cutting tips tend to hold coating materials longer in the valleys, thus giving enhanced protection to the tool and the tool can cut faster by 40% and last 60% longer than conventional tools on the markets today.

International comparative field evaluation of a traffic-responsive signal control strategy in three cities

The recently developed network-wide real-time signal control strategy TUC has been implemented in three traffic networks with quite different traffic and control infrastructure characteristics: Chania, Greece (23 junctions); Southampton, UK (53 junctions); and Munich, Germany (25 junctions), where it has been compared to the respective resident real-time signal control strategies TASS, SCOOT and BALANCE. After a short outline of TUC, the paper describes the three application networks; the application, demonstration and evaluation conditions; as well as the comparative evaluation results. The main conclusions drawn from this high-effort inter-European undertaking is that TUC is an easy-to-implement, inter-operable, low-cost real-time signal control strategy whose performance, after very limited fine-tuning, proved to be better or, at least, similar to the ones achieved by long-standing strategies that were in most cases very well fine-tuned over the years in the specific networks.

Comparative field evaluation of the signal control strategy TUC in three traffic networks.

This paper describes how the recently developed network-wide real-time signal control strategy TUC has been implemented in three traffic networks with quite different traffic and control infrastructure characteristics: Chania, Greece (23 junctions); Southampton, U.K. (53 junctions); and Munich, Germany (25 junctions), where it has been compared to the respective resident real-time signal control strategies TASS, SCOOT and BALANCE. After a short outline of TUC, the paper describes the three application networks; the application, demonstration and evaluation conditions; as well as the comparative evaluation results. The main conclusions drawn from this high-effort inter-European undertaking is that TUC is an easy-to-implement, inter-operable, low-cost real-time signal control strategy whose performance, after limited fine-tuning, proved to be better or, at least, similar to the ones achieved by long-standing strategies that were in most cases very well fine-tuned over the years in the specific networks.

PREPARATION OF POLYELECTROLYTE MEMBRANES EMBEDDED WITH ZEOLITE NANOPARTICLES FOR ENHANCED PERFORMANCE IN FORWARD OSMOSIS

Water scarcity is a global issue that has already affected every continent. Membrane technology is considered as one of the most promising candidates for resolving this worsening issue. Among all the membrane processes, the emerging forward osmosis (FO) membrane process is osmotically-driven and has unique advantages compared with other traditional pressure-driven membrane processes. One of the major challenges to advancing the FO membrane process is the lack of a suitable membrane. Polyelectrolyte thin film prepared via layer-by-layer (LbL) technique has demonstrated its excellent performance in many applications including electronics, optics, sensors, etc. Recent studies have revealed the potential of polyelectrolyte thin films in acting as the active separation layer of FO membranes, but significant efforts are still needed to improve the membrane performance and understand the transport mechanisms. This dissertation introduces a novel approach to prepare a zeolite-embedded polyelectrolyte composite membrane for enhanced FO performance. This membrane takes advantages of the versatile LbL process to unprecedentedly incorporate high loading of zeolite nanoparticles, which are anticipated to facilitate water transport due to the uniquely interconnected structure of zeolites. Major topics discussed in this dissertation include: (1) the synthesis and evaluation of the polyelectrolyte-zeolite composite FO membrane, (2) the examination of the fouling resistance to identify its technical limitations, (3) the demonstration of the membrane regenerability as an effective strategy for membrane fouling control, and (4) the investigation of crosslinking effects on the membrane performance to elucidate the transport mechanisms involved in the zeolite-embedded polyelectrolyte membranes. Comparative studies have been made between polyelectrolyte membranes with and without zeolite incorporation. The findings suggest that the zeolite-embedded membrane, although slightly more susceptible to silica scaling, has demonstrated enhanced water flux and separation capability, good resistance to organic fouling, and complete regenerability for fouling control. Additionally, the embedded zeolite nanoparticles are proved to be able to create fast pathways for water transport. Overall, this work provides a novel strategy to create zeolite-polymer composite membranes with enhanced separation performance and unique fouling mitigation properties.

Calcium response of KCl-excited populations of ventricular myocytes from the European sea bass (Dicentrarchus labrax): a promising approach to integrate cell-to-cell heterogeneity in studying the cellular basis of fish cardiac performance

Climate change challenges the capacity of fishes to thrive in their habitat. However, through phenotypic diversity, they demonstrate remarkable resilience to deteriorating conditions. In fish populations, inter-individual variation in a number of fitness-determining physiological traits, including cardiac performance, is classically observed. Information about the cellular bases of inter-individual variability in cardiac performance is scarce including the possible contribution of excitation-contraction (EC) coupling. This study aimed at providing insight into EC coupling-related Ca2+ response and thermal plasticity in the European sea bass (Dicentrarchus labrax). A cell population approach was used to lay the methodological basis for identifying the cellular determinants of cardiac performance. Fish were acclimated at 12 and 22 A degrees C and changes in intracellular calcium concentration ([Ca2+](i)) following KCl stimulation were measured using Fura-2, at 12 or 22 A degrees C-test. The increase in [Ca2+](i) resulted primarily from extracellular Ca2+ entry but sarcoplasmic reticulum stores were also shown to be involved. As previously reported in sea bass, a modest effect of adrenaline was observed. Moreover, although the response appeared relatively insensitive to an acute temperature change, a difference in Ca2+ response was observed between 12- and 22 A degrees C-acclimated fish. In particular, a greater increase in [Ca2+](i) at a high level of adrenaline was observed in 22 A degrees C-acclimated fish that may be related to an improved efficiency of adrenaline under these conditions. In conclusion, this method allows a rapid screening of cellular characteristics. It represents a promising tool to identify the cellular determinants of inter-individual variability in fishes' capacity for environmental adaptation.

The DCA:SOMe comparison: a comparative study between two biologically-inspired algorithms

The dendritic cell algorithm (DCA) is an immune-inspired algorithm, developed for the purpose of anomaly detection. The algorithm performs multi-sensor data fusion and correlation which results in a ‘context aware’ detection system. Previous applications of the DCA have included the detection of potentially malicious port scanning activity, where it has produced high rates of true positives and low rates of false positives. In this work we aim to compare the performance of the DCA and of a self-organizing map (SOM) when applied to the detection of SYN port scans, through experimental analysis. A SOM is an ideal candidate for comparison as it shares similarities with the DCA in terms of the data fusion method employed. It is shown that the results of the two systems are comparable, and both produce false positives for the same processes. This shows that the DCA can produce anomaly detection results to the same standard as an established technique.

Étude comparative de la mémoire de source et des faux souvenirs dans la maladie d’Alzheimer et la maladie de Parkinson avec et sans démence

Dans les dernières années, les études sur les maladies neurodégénératives telles que la maladie d’Alzheimer (MA) et la maladie de Parkinson sans démence (MP) et avec démence (MPD) ont été nombreuses, mais la différenciation de ces patients sur la base de leur profil cognitif doit être encore améliorée. Effectivement, l’évaluation clinique peut s’avérer difficile en raison du peu de spécificité dans la présentation de leurs déficits neuropsychologiques. Ceci s’explique par la variabilité et le chevauchement des processus cliniques et pathologiques affectant essentiellement les mêmes régions/fonctions, soit celles liées aux lobes temporaux médians (LTM)/Mémoire (fonction LTM/Mémoire) et aux lobes frontaux (LF)/Fonctions exécutives (fonction LF/Exécutive). Toutefois, il existerait une distinction critique au niveau de l’intégrité relative de ces fonctions dans ces maladies neurodégénératives, ce qui permettrait d’identifier des déficits cognitifs spécifiques à la MA, la MP et la MPD. La présente thèse s’inscrit dans cette volonté de caractériser les profils cognitifs propres à la MA, la MP et la MPD, plus précisément par l’étude novatrice de la mémoire de source et des faux souvenirs. Les quatre chapitres qui composent cette thèse servent donc à documenter la nature de ces mécanismes mnésiques, leurs patrons de performance spécifiques dans la MA, la MP et la MPD, et leur sensibilité aux atteintes des fonctions LTM/Mémoire et LF/Exécutive. Ainsi, le Chapitre I démontre la pertinence d’étudier la mémoire de source et les faux souvenirs dans la MA, la MP et la MPD, en décrivant leurs interactions avec les fonctions LTM/Mémoire et LF/Exécutive, toutes les deux atteintes dans ces maladies. Le Chapitre II, présenté sous forme d’article, révèle des déficits en mémoire de source chez des patients MP, mais seulement dans l’une des tâches employées. Également, malgré des atteintes des fonctions LF/Exécutive et LTM/Mémoire, il est démontré que seule la fonction LTM/Mémoire est liée à l’altération de la mémoire de source chez les patients MP. Le Chapitre III, également sous forme d’article, illustre un taux anormal de faux souvenirs chez des patients MA, tandis que chez des patients MP et MPD, il est démontré qu’ils ont un taux de faux souvenirs comparable à celui des participants contrôles. Il est également rapporté que malgré l’atteinte de la fonction LF/Exécutive chez les patients MA, MP et MPD, elle est seulement liée à l’augmentation des faux souvenirs chez les patients MA. Finalement, dans le dernier Chapitre (IV), les résultats obtenus sont discutés dans leur ensemble à la lumière des prédictions et connaissances actuelles, tout en identifiant les limites afin d’orienter les perspectives de recherche.

Invisible, therefore isolated: comparative effects of team virtuality with task virtuality on workplace isolation and work outcomes

The new standards of technological and flexible arrangements have made virtual work prevalent for almost everyone in all levels of an organization. Whether in a virtual or traditional setting, current working conditions allow anyone to collaborate, work and interact with others through electronic means of communication, thereby creating a lack of face-to-face contact. Even though the dynamics of virtuality have been widely elaborated at the team level, there are still many unknowns about the impacts of virtuality experienced at an individual level. This paper aims to shed light on the relationship between workplace social isolation, job satisfaction, perceived performance and turnover intention comparing individual responses to team virtuality and task virtuality. Our findings propose that there are statistically significant relations between individual task virtuality, workplace social isolation, satisfaction, perceived performance and turnover intention in organizations. The results also reveal that task virtuality is a better predictor than team virtuality in estimating workplace social isolation and turnover intention.

Maximum power point tracking techniques for photovoltaic systems: a comprehensive review and comparative analysis

Maximum Power Point Tracking (MPPT) is an important concern in Photovoltaic (PV) systems. As PV systems have a high cost of energy it is essential that they are operated to extract the maximum possible power at all times. However, under non-uniform environmental conditions, which frequently arise in the outdoor environment, many MPPT techniques will fail to track the global peak power. This review paper discusses conventional MPPT techniques designed to operate under uniform environmental conditions and highlights why these techniques fail under non-uniform conditions. Following this, techniques designed specifically to operate under non-uniform environmental conditions are analysed and compared. Simulation results which compare the performance of the common Perturb and Observe (P&O) method, the Particle Swarm Optimisation (PSO) and the Simulated Annealing (SA) MPPT approaches under non-uniform environmental conditions are also presented. The research presented in this review indicates that there is no single technique which can achieve reliable global MPPT with low cost and complexity and be easily adapted to different PV systems.

Gender issues in elementary mathematics teaching materials: a comparative study between China and Australia

International Association for the Evaluation of Educational Achievement (IEA) cross-national studies (FIMS, SIMS and TIMSS) show that gender differences in mathematical achievements and attitudes have decreased considerably over thirty years (Hanna, 2000), however, mathematics is still historically stereotyped as a male domain with crucial evidence supporting this belief (Forgasz, Leder, & Kloosterman, 2009). Previous research showed that gender differences in mathematics participation,performance and achievement existed widely in the majority of English speaking countries, specifically favouring boys (Forgasz, 1992; Hyde, Fennema, & Lamon, 1990; Tiedemann, 2000). Hyde, Lindberg, Linn, Ellis and Williams (2008) pointed out that the stereotype that females lack mathematical ability persists and is widely held by parents and teachers.Mathematics teaching materials play an important role in mathematics teaching and learning. The contents within mathematical teaching materials are rational, and deliver both explicit and implicit information. The explicit information refers to mathematics knowledge that students can learn from textbooks, while the latter one, also named as hidden curriculum, contains social and cultural messages. Hidden curriculum is a side effect of education. It has deep and long-term influences on students’ construction of math-gender stereotype that impact their future mathematicallearning (Zhang & Zhou, 2008). Therefore, this study will investigate Chinese andAustralian elementary mathematics teaching materials to explore the messages of gender equity and inequity delivered through hidden curriculum including names, images and problem-solving contexts. Based on the findings, practical implications concerning the promotion of equitable gender environments within elementary mathematics teaching materials from a cross-cultural perspective will be discussed.

Comparative assessment of denim garments treated with laser bleaching and enzymatic bleaching methods

The performance of denim garments was evaluated after laser bleaching and enzymatic bleaching. Laser is an eco-friendly way to bleach the denim garment, and the color-fading of denim garments treated with laser and enzymatic bleaching was examined in this study.

Analyse comparative de l’approche bioclimatique et de la méthode LEED en architecture

Motivé par l’évolution de la production architecturale durable dans les pays d’Amérique latine, et plus particulièrement en Colombie, mon projet de recherche porte sur l’adaptation de l’architecture à ce nouveau contexte. L’approche architecturale traditionnelle à la prise en compte de l’énergie et du climat est l’architecture bioclimatique : reproduite à partir de connaissances et techniques ancestrales remontant à la conception de l’abri, cette dernière étudie les phénomènes physiques associés au confort thermique afin de les reproduire dans une nouvelle architecture. De nouvelles méthodes d’évaluation environnementale se sont développées dans les dernières décennies pour améliorer l’intégration environnementale des bâtiments. Ces méthodes privilégient la normalisation des solutions et utilisent des systèmes de certification pour reconnaître la performance environnementale et énergétique des bâtiments. Le résultat visé est la conformité aux standards internationaux de durabilité. Ce mémoire porte sur l’analyse comparative de l’architecture bioclimatique et de la certification environnementale à partir de la structure des sujets abordés par LEED, une des méthodes les plus connues d’une telle certification. Cette comparaison permet de constater que les deux approches sont motivées par les mêmes préoccupations environnementales mais que leurs méthodes d’intégration de ces préoccupations diffèrent, en particulier quant à la prise en compte des facteurs locaux et globaux.