Avaliação do comportamento reológico de pastas de cimento para poços de petróleo com adição de plastificantes

The isolation of adjacent zones encountered during oilwell drilling is carried out by Portland-based cement slurries. The slurries are pumped into the annular positions between the well and the casing. Their rheological behavior is a very important component for the cementing process. Nowadays, several alternative materials are used in oilwell cementing, with goal the modification and the improvement of their properties, mainly the increase of the fluidity. And this can be reached by using plasticizers additives able to account for different oilwell conditions, yielding compatible cement slurries and allowing enough time for the complete cementing operation. If the rheological properties of the slurry are properly characterized, the load loss and flow regime can be correctly predicted. However, this experimental characterization is difficult. Rheological models capable of describing the cement slurry behavior must be capable of predicting the slurry cement deformation within reasonable accuracy. The aim of this study was to characterize rheologically the slurries prepared with a especial class of Portland cement, water and plasticizers based on lignosulfonate, melamine and polycarboxylate at temperatures varying from 27°C to 72°C. The tests were carried out according to the practical recommendations of the API RP 10B guidelines. The results revealed a great efficiency and the dispersive power of the polycarboxylate, for all temperatures tested. This additive promoted high fluidity of the slurries, with no sedimentation. High lignosulfonate and melamine concentrations did not reduce the rheological parameters (plastic viscosity and yield stress) of the slurries. It was verified that these additives were not compatible with the type of cement used. The evaluated rheological models were capable of describing the behavior of the slurries only within concentration and temperature ranges specific for each type of additive

Nitretação em plasma com gaiola catódica: caracterização e avaliação do desempenho da camada nitretada em facas de corte

Nowadays, in the plastic industry are used mills that accomplish the recycling of residues generated in the production of its components. These mills contain cut sheets that suffer accelerated wear, once they are submitted constantly to the tribologic efforts, decreasing its useful life. To reduce this problem, it s used noble steels or takes place superficial treatments. The ionic nitriding process presents some limitations related to the uniformity of the layer in pieces with complex geometry, committing its application in pieces as knives, head offices, engagements, etc. However, the new technique of nitriding in cathodic cage eliminates some problems, as the restrictions rings, inherent to the conventional ionic nitriding. In present work, was studied the use viabilization of steels less noble, as SAE 1020, SAE 4320 and SAE 4340, nitreded by two different techniques, to substitute the AISI 01 steels, usually used in the cut knifes fabrication, seeking to reduce the costs and at the sane time to increase the useful life of these knifes. The steel most viable was the SAE 4340, nitrided in cathodic cage, because it presented uniformity in thickness and in the hardness of the layer, besides of increased 58% in the average its useful life

Avaliação do efeito de particulados sólidos na eficiência de um inibidor de corrosão recomendado para meios salinos com CO2

The main problem on the exploration activity on petroleum industry is the formation water resulted on the fields producing. The aggravating of this problem is correlated with the advancing technologies used on the petroleum extractions and on its secondary approach objecting the reobtainment of this oil. Among the main contaminants of the water formation are corrosives gases such as: O2, CO2 and H2S, some solids in suspension and dissolved salts. Concerning to those gases the CO2 is the one that produce significant damage for carbon steel on corrosion process of the petroleum and gas industries. Corrosion inhibitors for carbon steel in formation water is one of the most used agents in control of those damages. In this context, the poor investigations of carbon steel corrosion proceeding from solids in suspension is an opened field for studies. On this work the inhibitor effect of the commercial CORRTREAT 703 was evaluated on some specific solids in suspension at saline medium containing 10.000 ppm of de-aerated chloride using CO2 until non oxygen atmosphere been present. For that, quartz, calcium carbonate, magnetite and iron sulphide were subjected to this investigation as the selected solids. The effect of this inhibitor on corrosion process correlated with those specific solids, was measured using electrochemical (resistance of linear polarization and galvanic pair) and gravimetrical techniques. During all the experimental work important parameters were monitored such as: pH, dissolved oxygen, temperature, instantaneous corrosion rate and galvanic current. According to the obtained results it was proved that the suspension solids calcium carbonate and iron sulphide decrease the corrosion process in higher pH medium. Meanwhile the quartz and magnetite been hardness increase corrosion by broking of the passive layer for erosion. In the other hand, the tested inhibitor in concentration of 50 ppm, showed to be effective (91%) in this corrosion process

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Sinterização de matrizes cerâmicas à base de alumina reforçadas por carbetos a partir de precursores poliméricos

Ceramic composites produced with polymerics precursors have been studied for many years, due to the facility of obtaining a complex shape, at low temperature and reduces cost. The main objective of this work is to study the process of sintering of composites of ceramic base consisting of Al2O3 and silicates, reinforced for NbC, through the technique of processing AFCOP, as well as the influence of the addition of LZSA, ICZ and Al as materials infiltration in the physical and mechanical properties of the ceramic composite. Were produced ceramic matrix composites based SiCxOy e Al2O3 reinforced with NbC, by hidrosilylation reaction between D4Vi and D1107 mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. The specimens produced were pyrolised at 1200, 1250 and 1400°C and infiltred with Al, ICZ and LZSA, respectively. Density, porosity, flexural mechanical strength and fracture surface by scanning electron microscopy were evaluated. The microstructure of the composites was investigated by X-ray diffraction to identify the presence of crystalline phases. The composites presented apparent porosity varying of 31 up to 49% and mechanical flexural strength of 14 up to 34 MPa. The infiltration process improviment of the densification and reduction of the porosity, as well as increased the values of mechanical flexural strength. The obtained phases had been identified as being Al3Nb, NbSi2, Nb5S3, Nb3Si and NbC. The samples that were submitted the infiltration process presented a layer next surface with reduced pores number in relation to the total volume

Fabrico híbrido em grande escala de materiais compósitos

As tecnologias de fabrico aditivo e subtrativo têm vindo a desenvolver-se no sentido de permitir a produção de peças com melhores rigor dimensional, características mecânicas, físicas e químicas, utilizando ainda materiais completamente novos desenvolvidos a pensar nos requisitos em determinadas aplicações. A fabricação híbrida, um processo que utiliza dois ou mais processos de fabrico com características diferentes na mesma unidade de fabrico aproveitando assim as vantagens de cada processo, tem vindo a aparecer como meio de melhorar a qualidade e complexidade dos produtos a serem desenvolvidos. O desenvolvimento de processos de grande escala tem também vindo a verificar-se, sendo estes uma ampliação e aplicação dos processos já existentes para a produção a uma escala maior. Os compósitos de matriz polimérica são os materiais em foco neste trabalho. Alguns polímeros derivam de fontes não renováveis como o petróleo, o que tem levado ao crescimento da indústria de reciclagem deste tipo de materiais para a sua reutilização. Acresce o facto de que a incorporação de resíduos industriais é vista como uma vantagem, quer em termos de custos, quer em termos de sustentabilidade. O presente trabalho teve com objetivo o desenvolvimento de tecnologias de fabricação híbrida, aplicadas a materiais compósitos provenientes, em parte, do reaproveitamento de resíduos industriais. Assim, foi desenvolvido um sistema de extrusão de grandes dimensões - um braço robot com uma extrusora acoplada no seu último eixo, com uma variante híbrida combinando extrusão e maquinação - uma máquina fresadora com uma extrusora acoplada na sua árvore (Eixo Z); e foram desenvolvidos materiais compósitos aplicando o reprocessamento com incorporação de resíduos, por forma a originar produtos de materiais reciclados, contribuindo para a conservação do ambiente. Foi efetuada a validação de um dos conceitos através do desenvolvimento de peças extrudidas com os materiais reciclados e posterior estudo de parâmetros de processamento que conduzem a melhores resultados em temos de geometria. Esta avaliação foi efetuada com recurso a técnicas de engenharia inversa. Foi possível identificar tendências que permitirão melhorar a aplicabilidade deste tipo de processos no fabrico de peças de grandes dimensões.

Caraterização e avaliação de populações portuguesas de Opuntia ficus-indica (L.) Miller

Em solos de menor aptidão agrícola a figueira da-índia tem interesse como cultura alternativa, quer para a produção de fruto quer como espécie forrageira. Foram caracterizados e avaliados, quanto ao vigor vegetativo e produção de biomassa, por métodos não destrutivos e nos dois primeiros anos apos a plantação, 16 ecótipos portugueses e duas variedades italianas (“Gialla” e “Bianca”) de figueira-da-índia (Opuntia ficus-indica (L.) Miller). A produção de biomassa e vigor vegetativo foram aferidos através da determinação do número de cladódios, área de cladódios e peso verde por planta. Através da análise biométrica de 180 cladódios, foram estabelecidos modelos lineares para a quantificação não destrutiva da área de cladódios e do peso verde por planta. Não foi possível estabelecer um modelo linear para a quantificação não destrutiva da matéria seca.

Avaliação da atividade antimicrobiana in vitro do extrato bruto de cipó de alho Mansoa alliacea em isolados bacterianos de peixes.

O estado do Amapá está localizado no norte do Brasil, possuindo rica biodiversidade, onde diferentes aspectos apresentam tênue conhecimento ou ainda são desconhecidos. Entre estes se destaca o conhecimento quanto a etiologia das infecções no homem, tendo como veículo o peixe, que representa relevante aspecto de saúde pública, especialmente quando consumido cru ou após tratamento térmico inadequado. Microrganismos podem permanecer viáveis nos peixes estocados a baixas temperaturas, condição física que os permite sobreviver, multiplicar e produzir fatores de virulência, capazes ainda de ocasionar infecções oportunistas. Assim, Staphylococcus aureus, Salmonella spp., Escherichia coli e Aeromonas spp. podem ser usados como marcadores de sanidade em alimentos. Existe ainda a preocupação quanto ao uso de fitoterápicos destinados ao tratamento de doenças em peixes, devido à probabilidade da existência de toxicidade ao animal. Dessa forma, são necessárias pesquisas que possam contribuir com o desenvolvimento de produtos naturais com atividade antibacteriana. A região amazônica é a maior fonte da biodiversidade vegetal do planeta, o que a tornar um grande potencial para os estudos sobre fitoterápicos de interesse na aquicultura, além do vasto conhecimento das populações tradicionais sobre o uso de plantas medicinais. Cipó-de-alho Mansoa alliacea (Bignoniaceae) é um arbusto com característica de trepadeira de origem amazônica, que atinge até 3 metros de altura. Seu caule e suas folhas possuem cheiro mais forte que o alho, podendo ser substituído no tempero dos alimentos e também como planta medicinal. A presente investigação tem como objetivo isolar microrganismos presentes em peixes oriundos de pisciculturas e feiras livres localizadas de Macapá-AP e avaliar através da atividade antimicrobiana in vitro do extrato bruto de M. alliacea em isolados bacterianos, através da determinação da sua Concentração Inibitória Mínima (CIM) e Concentração Bactericida Mínima (CBM). Os microrganismos foram isolados a partir de 10 amostras de peixes dentre as quais cinco adquiridas em pisciculturas e cinco em feiras livres de Macapá. As análises foram realizadas no Laboratório Especial de Microbiologia Aplicada (LEMA) e Laboratório Central de Saúde Pública do Amapá (LACEN-AP). Todas as amostras adquiridas nas feiras livres de Macapá apresentaram S. aureus, Salmonella spp. e E.coli em números superiores àqueles de tolerância segundo a legislação, enquanto as cinco amostras de peixes provenientes de pisciculturas encontravam-se dentro dos padrões microbiológicos sanitários. Não foi observada presença de Aeromonas spp. nas amostras avaliadas. Após os ensaios de CIM e CBM das amostras bacterianas ao extrato de M. alliacea, foi realizada a quantificação, isolamento e identificação dos microrganismos, observando-se atividade bacteriostática em S. aureus, Salmonella spp. e E. coli e atividade bactericida para E. coli. Foi possível observar que a utilização de extrato bruto hidro alcoólico nos ensaios de CIM e CBM demonstrou atividade antimicrobiana frente aos isolados. Novos estudos sobre a atividade antimicrobiana deverão ser conduzidos sobre a utilização de frações de compostos químicos de M. alliacea além da avaliação do extrato de M. alliacea para minimizar a contaminação microbiana e/ou conservação de peixes, para fins alimentícios.

Transtorno do déficit de atenção e hiperatividade: proposta de avaliação neuropsicológica para diagnóstico

Attention deficit hyperactivity disorder (ADHD) is characterized by a persistent pattern of inattention and/or hyperactivity/impulsivity. The aim of this research was to contribute more precisely to the diagnosis of ADHD, to propose a battery of neuropsychological assessment and to analyze the contribution of each test. We studied 10 matched pairs of children with ADHD and normal controls (7 to 11 years). Inclusion criteria were: presence of ADHD typical behavior, positive diagnosis of ADHD based on DSM-IV, normal IQ, normal neurological examination and parental consent. We used extensive neuropsychological battery. The results showed differential sensitivity for detection of attentional problems in children with ADHD, although most tests did not reach statistical significance. The item, errors, of WCST revealed statistically significant difference between the two groups: ADHD performance was inferior to controls . In conclusion the neuropsychological assessment battery used in this research contributed to the diagnosis of ADHD.

Método para avaliação da conduta visual de lactentes

The purpose of this study is to introduce a method to evaluate visual functions in infants in the first three months of life. An adaptation of the Guide for the Assessment of Visual Ability in Infants (Gagliardo, 1997) was used. The instrument was a ring with string. It was implemented a pilot study with 33 infants, selected according to the following criteria: neonates well enough to go home within two days of birth; 1 to 3 months of chronological age; monthly evaluation with no absence; subjects living in Campinas/SP metropolitan area. In the first month we observed: visual fixation (93,9%); eye contact (90,9%); horizontal tracking (72,7%); inspects surroundings (97,0%). In the third month, we observed: inspects own hands (42,4%) and increased movements of arms (36,4%). This method allowed the evaluation of visual functions in infants, according to the chronological age. Alterations in this function will facilitate immediate referral to medical services for diagnoses.

Diretrizes curriculares nacionais para o ensino médio: avaliação de documento

This text offers some contributions to the debate on the changes proposed to the National Curricular Directives to reform secondary education in Brazil. In the first part, the political and economic scene is evaluated as the context which generated the last stage of reforms in the educational field in the 90s. It questions the option for a model of structural reform (in the Brazilian case more restricted to the Program for Reform of Professional Education - PROEP) and of the curriculum, whose themes find their justification in the contemporary economic, social cultural and political context. It discusses the use of a model that bases itself on experiences developed in other countries and takes the international orientation of the multilateral organizations as its theoretical methodological reference, leaving out the peculiarities and injunctions of the Brazilian political administrative system. Such a policy measure can increase the tension and distance normally existing between government programs and the possibility of their real implementation in the school network. In the second part, it discusses the Resolution of the National Education Council, the Congress on Basic Education, no.3, of 16.698 that instituted the National Curricular Directives for secondary education, as well as the Legal Bases - Part I - of the National Curricular Parameters for secondary education. The analysis of official discourse takes Bardin's (1977, p. 209) proposals as its methodological reference for the models of structural analysis, seeking to make the implicit values and the connotations of the legal texts explicit

Avaliação do teor e da estabilidade de vitaminas do complexo B e vitamina C em bebidas isotônicas e energéticas

Vitamin C stability and concentration was evaluated in isotonic beverages and B group vitamins (B1, B2, B3, B5 and B6) in power beverages. The amount of vitamins was found to be above of that declared on the labels, even after the shelf life had been exceeded. A small decrease in the amount of B group vitamins was observed during the shelf life of the products. In the case of vitamin C this decrease was slightly higher. The present research shows the need of increased quality control and inspection.

Determinação do perfil de compostos voláteis e avaliação do sabor e aroma de bebidas produzidas a partir da erva-mate (Ilex paraguariensis)

Volatile compounds from green and roasted yerba mate were analyzed by gas chromatography/mass spectrometry and the flavor profile from yerba mate beverages was determined by descriptive quantitative analyses. The main compounds tentatively identified in green mate were linalool, alpha-terpineol and trans-linalool oxide and in roasted mate were (E,Z)-2,4-heptadienal isomers and 5-methylfurfural. Green mate infusion was qualified as having bitter taste and aroma as well as green grass aroma while roasted mate was defined as having a smooth, slightly burnt aroma. The relationship between the tentatively identified compounds and flavor must be determined by olfatometric analysis.

Contaminação de águas subterrâneas por pesticidas: avaliação preliminar

A discussion about groundwater contamination is presented in this work. Contamination by agricultural activity, more specifically by pesticides is emphasized. Indirect and direct estimates could be used to predict pesticide behavior in soil, and consequently, to evaluate the potential of groundwater contamination. These results could be applied to advise about the possibility of groundwater contamination by pesticides, and to provide subsidies for making decisions more quickly and efficiently.

Propriedades elétricas e magnéticas de novos compostos com o ânion condutor [Ni(dmit)2]- e radicais magnéticos nitronil nitróxido

Three compounds have been synthesized with formulae [3-MeRad][Ni(dmit)2] (1), [4-MeRad][Ni(dmit)2] (2) and [4-PrRad][Ni(dmit)2] (3) where [Ni(dmit)2]- is an anionic pi-radical (dmit = 1,3-dithiol-2-thione-4,5-dithiolate) and [3-MeRad]+ is 3-N-methylpyridinium alpha-nitronyl nitroxide, [4-MeRad]+ is 4-N-methylpyridinium alpha-nitronyl nitroxide and [4-PrRad]+ is 4-N-propylpyridinium alpha-nitronyl nitroxide. The temperature-dependent magnetic susceptibility of 1 revealed that an antiferromagnetic interaction operates between the 3-MeRad+ radical cations with exchange coupling constants of J1 = - 1.72 cm-1 and antiferromagnetism assigned to the spin ladder chains of the Ni(dmit)2 radical anions. Compound 1 exhibits semiconducting behavior and 3 presents capacitor behavior in the temperature range studied (4 - 300 K).