AROUSAL, FATIGUE AND MENTAL PERFORMANCE: THE EFFECTS OF FASTING ON COGNITION

This study examined the effects of skipping breakfast on selected aspects of children's cognition, specifically their memory (both immediate and one week following presentation of stimuli), mental tempo, and problem solving accuracy. Test instruments used included the Hagen Central/Incidental Recall Test, Matching Familiar Figures Test, McCarthy Digit Span and Tapping Tests. The study population consisted of 39 nine-to eleven year old healthy children who were admitted for overnight stays at a clinical research setting for two nights approximately one week apart. The study was designed to be able to adequately monitor and control subjects' food consumption. The design chosen was the cross-over design where randomly on either the first or second visit, the child skipped breakfast. In this way, subjects acted as their own controls. Subjects were tested at noon of both visits, this representing an 18-hour fast.^ Analysis focused on whether or not fasting for this period of time affected an individual's performance. Results indicated that for most of the tests, subjects were not significantly affected by skipping breakfast for one morning. However, on tests of short-term central and incidental recall, subjects who had skipped breakfast recalled significantly more of the incidental cues although they did so at no apparent expense to their storing of central information. In the area of problem-solving accuracy, subjects skipping breakfast at time two made significantly more errors on hard sections of the MFF Test. It should be noted that although a large number of tests were conducted, these two tests showed the only significant differences.^ These significant results in the areas of short-term incidental memory and in problem solving accuracy were interpreted as being an effect of subject fatigue. That is, when subjects missed breakfast, they were more likely to become fatigued and in the novel environment presented in the study setting, it is probable that these subjects responded by entering Class II fatigue which is characterized by behavioral excitability, diffused attention and altered performance patterns. ^

The relationship between hospital financial performance and information technology integration strategy selection

In light of the new healthcare regulations, hospitals are increasingly reevaluating their IT integration strategies to meet expanded healthcare information exchange requirements. Nevertheless, hospital executives do not have all the information they need to differentiate between the available strategies and recognize what may better fit their organizational needs. ^ In the interest of providing the desired information, this study explored the relationships between hospital financial performance, integration strategy selection, and strategy change. The integration strategies examined – applied as binary logistic regression dependent variables and in the order from most to least integrated – were Single-Vendor (SV), Best-of-Suite (BoS), and Best-of-Breed (BoB). In addition, the financial measurements adopted as independent variables for the models were two administrative labor efficiency and six industry standard financial ratios designed to provide a broad proxy of hospital financial performance. Furthermore, descriptive statistical analyses were carried out to evaluate recent trends in hospital integration strategy change. Overall six research questions were proposed for this study. ^ The first research question sought to answer if financial performance was related to the selection of integration strategies. The next questions, however, explored whether hospitals were more likely to change strategies or remain the same when there was no external stimulus to change, and if they did change, they would prefer strategies closer to the existing ones. These were followed by a question that inquired if financial performance was also related to strategy change. Nevertheless, rounding up the questions, the last two probed if the new Health Information Technology for Economic and Clinical Health (HITECH) Act had any impact on the frequency and direction of strategy change. ^ The results confirmed that financial performance is related to both IT integration strategy selection and strategy change, while concurred with prior studies that suggested hospital and environmental characteristics are associated factors as well. Specifically this study noted that the most integrated SV strategy is related to increased administrative labor efficiency and the hybrid BoS strategy is associated with improved financial health (based on operating margin and equity financing ratios). On the other hand, no financial indicators were found to be related to the least integrated BoB strategy, except for short-term liquidity (current ratio) when involving strategy change. ^ Ultimately, this study concluded that when making IT integration strategy decisions hospitals closely follow the resource dependence view of minimizing uncertainty. As each integration strategy may favor certain organizational characteristics, hospitals traditionally preferred not to make strategy changes and when they did, they selected strategies that were more closely related to the existing ones. However, as new regulations further heighten revenue uncertainty while require increased information integration, moving forward, as evidence already suggests a growing trend of organizations shifting towards more integrated strategies, hospitals may be more limited in their strategy selection choices.^

Performance of HbA1c for classifying diabetes and diagnostic threshold for diabetes among the Mexican American border community

Objective. In 2009, the International Expert Committee recommended the use of HbA1c test for diagnosis of diabetes. Although it has been recommended for the diagnosis of diabetes, its precise test performance among Mexican Americans is uncertain. A strong “gold standard” would rely on repeated blood glucose measurement on different days, which is the recommended method for diagnosing diabetes in clinical practice. Our objective was to assess test performance of HbA1c in detecting diabetes and pre-diabetes against repeated fasting blood glucose measurement for the Mexican American population living in United States-Mexico border. Moreover, we wanted to find out a specific and precise threshold value of HbA1c for Diabetes Mellitus (DM) and pre-diabetes for this high-risk population which might assist in better diagnosis and better management of patient diabetes. ^ Research design and methods. We used CCHC dataset for our study. In 2004, the Cameron County Hispanic Cohort (CCHC), now numbering 2,574, was established drawn from randomly selected households on the basis of 2000 Census tract data. The CCHC study randomly selected a subset of people (aged 18-64 years) in CCHC cohort households to determine the influence of SES on diabetes and obesity. Among the participants in Cohort-2000, 67.15% are female; all are Hispanic. ^ Individuals were defined as having diabetes mellitus (Fasting plasma glucose [FPG] ≥ 126 mg/dL or pre-diabetes (100 ≤ FPG < 126 mg/dL). HbA1c test performance was evaluated using receiver operator characteristic (ROC) curves. Moreover, change-point models were used to determine HbA1c thresholds compatible with FPG thresholds for diabetes and pre-diabetes. ^ Results. When assessing Fasting Plasma Glucose (FPG) is used to detect diabetes, the sensitivity and specificity of HbA1c≥ 6.5% was 75% and 87% respectively (area under the curve 0.895). Additionally, when assessing FPG to detect pre-diabetes, the sensitivity and specificity of HbA1c≥ 6.0% (ADA recommended threshold) was 18% and 90% respectively. The sensitivity and specificity of HbA1c≥ 5.7% (International Expert Committee recommended threshold) for detecting pre-diabetes was 31% and 78% respectively. ROC analyses suggest HbA1c as a sound predictor of diabetes mellitus (area under the curve 0.895) but a poorer predictor for pre-diabetes (area under the curve 0.632). ^ Conclusions. Our data support the current recommendations for use of HbA1c in the diagnosis of diabetes for the Mexican American population as it has shown reasonable sensitivity, specificity and accuracy against repeated FPG measures. However, use of HbA1c may be premature for detecting pre-diabetes in this specific population because of the poor sensitivity with FPG. It might be the case that HbA1c is differentiating the cases more effectively who are at risk of developing diabetes. Following these pre-diabetic individuals for a longer-term for the detection of incident diabetes may lead to more confirmatory result.^

CHARACTERIZATION OF THE COUNT RATE PERFORMANCE AND EVALUATION OF THE EFFECTS OF HIGH COUNT RATES ON MODERN GAMMA CAMERAS

CHARACTERIZATION OF THE COUNT RATE PERFORMANCE AND EVALUATION OF THE EFFECTS OF HIGH COUNT RATES ON MODERN GAMMA CAMERAS Michael Stephen Silosky, B.S. Supervisory Professor: S. Cheenu Kappadath, Ph.D. Evaluation of count rate performance (CRP) is an integral component of gamma camera quality assurance and measurement of system dead time (τ) is important for quantitative SPECT. The CRP of three modern gamma cameras was characterized using established methods (Decay and Dual Source) under a variety of experimental conditions. For the Decay method, input count rate was plotted against observed count rate and fit to the paralyzable detector model (PDM) to estimate τ (Rates method). A novel expression for observed counts as a function of measurement time interval was derived and the observed counts were fit to this expression to estimate τ (Counts method). Correlation and Bland-Altman analysis were performed to assess agreement in estimates of τ between methods. The dependencies of τ on energy window definition and incident energy spectrum were characterized. The Dual Source method was also used to estimate τ and its agreement with the Decay method under identical conditions and the effects of total activity and the ratio of source activities were investigated. Additionally, the effects of count rate on several performance metrics were evaluated. The CRP curves for each system agreed with the PDM at low count rates but deviated substantially at high count rates. Estimates of τ for the paralyzable portion of the CRP curves using the Rates and Counts methods were highly correlated (r=0.999) but with a small (~6%) difference. No significant difference was observed between the highly correlated estimates of τ using the Decay or Dual Source methods under identical experimental conditions (r=0.996). Estimates of τ increased as a power-law function with decreasing ratio of counts in the photopeak to the total counts and linearly with decreasing spectral effective energy. Dual Source method estimates of τ varied as a quadratic with the ratio of the single source to combined source activities and linearly with total activity used across a large range. Image uniformity, spatial resolution, and energy resolution degraded linearly with count rate and image distorting effects were observed. Guidelines for CRP testing and a possible method for the correction of count rate losses for clinical images have been proposed.

WORKLOAD AND PERFORMANCE FACTORS ASSOCIATED WITH MULTIMEDIA JOB AIDS FOR COMMUNITY HEALTH WORKERS

This dissertation focuses on factors of multimedia job aids that modify workload, protocol adherence and clinical errors in community health workers. Literature shows that community health workers performance is not acceptable even with support of paper job aids. There are cognitive theories that try to explain reasons why the performance of community health workers is poor regardless of the access to paper based-job aid. Based on cognitive science and multimedia design theories an intervention was designed to compare alternative representations for the information contained on paper job aids and the capability of this new designed job aids to enhance community health workers performance. The dissertation is divided in 5 main parts: 1. identification and description of the problem, 2. a methodological approach to create and evaluate an intervention, 3. Presentation of results of the intervention evaluation, 4. Discussion of findings and 5. Conclusions

A simulation study of the standard design, the rolling six design, the CRM, and the modified CRM in Phase I clinical trials

The Phase I clinical trial is considered the "first in human" study in medical research to examine the toxicity of a new agent. It determines the maximum tolerable dose (MTD) of a new agent, i.e., the highest dose in which toxicity is still acceptable. Several phase I clinical trial designs have been proposed in the past 30 years. The well known standard method, so called the 3+3 design, is widely accepted by clinicians since it is the easiest to implement and it does not need a statistical calculation. Continual reassessment method (CRM), a design uses Bayesian method, has been rising in popularity in the last two decades. Several variants of the CRM design have also been suggested in numerous statistical literatures. Rolling six is a new method introduced in pediatric oncology in 2008, which claims to shorten the trial duration as compared to the 3+3 design. The goal of the present research was to simulate clinical trials and compare these phase I clinical trial designs. Patient population was created by discrete event simulation (DES) method. The characteristics of the patients were generated by several distributions with the parameters derived from a historical phase I clinical trial data review. Patients were then selected and enrolled in clinical trials, each of which uses the 3+3 design, the rolling six, or the CRM design. Five scenarios of dose-toxicity relationship were used to compare the performance of the phase I clinical trial designs. One thousand trials were simulated per phase I clinical trial design per dose-toxicity scenario. The results showed the rolling six design was not superior to the 3+3 design in terms of trial duration. The time to trial completion was comparable between the rolling six and the 3+3 design. However, they both shorten the duration as compared to the two CRM designs. Both CRMs were superior to the 3+3 design and the rolling six in accuracy of MTD estimation. The 3+3 design and rolling six tended to assign more patients to undesired lower dose levels. The toxicities were slightly greater in the CRMs.^

Modified 3+3 design for phase I clinical trials

Phase I clinical trial is mainly designed to determine the maximum tolerated dose (MTD) of a new drug. Optimization of phase I trial design is crucial to minimize the number of enrolled patients exposed to unsafe dose levels and to provide reliable information to the later phases of clinical trials. Although it has been criticized about its inefficient MTD estimation, nowadays the traditional 3+3 method remains dominant in practice due to its simplicity and conservative estimation. There are many new designs that have been proven to generate more credible MTD estimation, such as the Continual Reassessment Method (CRM). Despite its accepted better performance, the CRM design is still not widely used in real trials. There are several factors that contribute to the difficulties of CRM adaption in practice. First, CRM is not widely accepted by the regulatory agencies such as FDA in terms of safety. It is considered to be less conservative and tend to expose more patients above the MTD level than the traditional design. Second, CRM is relatively complex and not intuitive for the clinicians to fully understand. Third, the CRM method take much more time and need statistical experts and computer programs throughout the trial. The current situation is that the clinicians still tend to follow the trial process that they are comfortable with. This situation is not likely to change in the near future. Based on this situation, we have the motivation to improve the accuracy of MTD selection while follow the procedure of the traditional design to maintain simplicity. We found that in 3+3 method, the dose transition and the MTD determination are relatively independent. Thus we proposed to separate the two stages. The dose transition rule remained the same as 3+3 method. After getting the toxicity information from the dose transition stage, we combined the isotonic transformation to ensure the monotonic increasing order before selecting the optimal MTD. To compare the operating characteristics of the proposed isotonic method and the other designs, we carried out 10,000 simulation trials under different dose setting scenarios to compare the design characteristics of the isotonic modified method with standard 3+3 method, CRM, biased coin design (BC) and k-in-a-row design (KIAW). The isotonic modified method improved MTD estimation of the standard 3+3 in 39 out of 40 scenarios. The improvement is much greater when the target is 0.3 other than 0.25. The modified design is also competitive when comparing with other selected methods. A CRM method performed better in general but was not as stable as the isotonic method throughout the different dose settings. The results demonstrated that our proposed isotonic modified method is not only easily conducted using the same procedure as 3+3 but also outperforms the conventional 3+3 design. It can also be applied to determine MTD for any given TTL. These features make the isotonic modified method of practical value in phase I clinical trials.^

Organizational perspectives on the management and evaluation of large -scale multicenter controlled clinical trials: An exploratory study of participation in the beta -blocker heart attack trial

A review of literature related to appointment-keeping served as the basis for the development of an organizational paradigm for the study of appointment-keeping in the Beta-blocker Heart Attack Trial (BHAT). Features of the organizational environment, demographic characteristics of BHAT enrollees, organizational structure and processes and previous organizational performance variables were measured so as to provide exploratory information relating to the appointment-keeping behavior of 3,837 participants enrolled at thirty-two Clinical Centers. Results suggest that the social context of individual behavior is an important consideration for the understanding of patient compliance. In particular, the degree to which previous organizational performance--as measured by obtaining recruitment goals--and the ability to utilize resources had particularly strong bivariate associations with appointment-keeping. Implications for future theory development, research and practical implications were provided as was a suggestion for the development of multidisciplinary research efforts conducted within the context of Centers for the study and application of adherence behaviors. ^

Investigation project: Representations about the professional role of recently graduated from the psychology career, state University of La Plata : Its relation with job insertion and performance

In this paper we present a research that took place between 2010 and 2012 included in an investigation scholarship awarded by the State University of la Plata. It is about the problem with the transition between college and professional work. It is a part of the produced studies on the importance of social representations as factors that impact on the performance of specific activities. In this case it's about finding out the relations given among the representations about graduated professional role of the Psychology career and its job insertion and performance. The theoretical framework corresponds to Social Psychology and Guidance theories. Methodologically this is an exploratory and descriptive study, based on the 'triangulation' conception, of multiple type, that allows combining in the same investigation, different strategies, theoretical perspectives and sources; however qualitative techniques were prioritized to analyze data. Finally there are some considerations about the social representations concerning to the professional performance, mainly in the clinical field associated to education, and also to the problems of both situations over other fields

Investigation project: Representations about the professional role of recently graduated from the psychology career, state University of La Plata : Its relation with job insertion and performance

In this paper we present a research that took place between 2010 and 2012 included in an investigation scholarship awarded by the State University of la Plata. It is about the problem with the transition between college and professional work. It is a part of the produced studies on the importance of social representations as factors that impact on the performance of specific activities. In this case it's about finding out the relations given among the representations about graduated professional role of the Psychology career and its job insertion and performance. The theoretical framework corresponds to Social Psychology and Guidance theories. Methodologically this is an exploratory and descriptive study, based on the 'triangulation' conception, of multiple type, that allows combining in the same investigation, different strategies, theoretical perspectives and sources; however qualitative techniques were prioritized to analyze data. Finally there are some considerations about the social representations concerning to the professional performance, mainly in the clinical field associated to education, and also to the problems of both situations over other fields

Investigation project: Representations about the professional role of recently graduated from the psychology career, state University of La Plata : Its relation with job insertion and performance

In this paper we present a research that took place between 2010 and 2012 included in an investigation scholarship awarded by the State University of la Plata. It is about the problem with the transition between college and professional work. It is a part of the produced studies on the importance of social representations as factors that impact on the performance of specific activities. In this case it's about finding out the relations given among the representations about graduated professional role of the Psychology career and its job insertion and performance. The theoretical framework corresponds to Social Psychology and Guidance theories. Methodologically this is an exploratory and descriptive study, based on the 'triangulation' conception, of multiple type, that allows combining in the same investigation, different strategies, theoretical perspectives and sources; however qualitative techniques were prioritized to analyze data. Finally there are some considerations about the social representations concerning to the professional performance, mainly in the clinical field associated to education, and also to the problems of both situations over other fields

Characterization of the dose distribution in the halo region of a clinical proton pencil beam using emulsion film detectors

Proton therapy is a high precision technique in cancer radiation therapy which allows irradiating the tumor with minimal damage to the surrounding healthy tissues. Pencil beam scanning is the most advanced dose distribution technique and it is based on a variable energy beam of a few millimeters FWHM which is moved to cover the target volume. Due to spurious effects of the accelerator, of dose distribution system and to the unavoidable scattering inside the patient's body, the pencil beam is surrounded by a halo that produces a peripheral dose. To assess this issue, nuclear emulsion films interleaved with tissue equivalent material were used for the first time to characterize the beam in the halo region and to experimentally evaluate the corresponding dose. The high-precision tracking performance of the emulsion films allowed studying the angular distribution of the protons in the halo. Measurements with this technique were performed on the clinical beam of the Gantry1 at the Paul Scherrer Institute. Proton tracks were identified in the emulsion films and the track density was studied at several depths. The corresponding dose was assessed by Monte Carlo simulations and the dose profile was obtained as a function of the distance from the center of the beam spot.

An investigation of the performance of a new Mechanical thrombectomy device using Bond Graph modelling: application to the extraction of blood clots in the middle cerebral artery

A number of thrombectomy devices using a variety of methods have now been developed to facilitate clot removal. We present research involving one such experimental device recently developed in the UK, called a ‘GP’ Thrombus Aspiration Device (GPTAD). This device has the potential to bring about the extraction of a thrombus. Although the device is at a relatively early stage of development, the results look encouraging. In this work, we present an analysis and modeling of the GPTAD by means of the bond graph technique; it seems to be a highly effective method of simulating the device under a variety of conditions. Such modeling is useful in optimizing the GPTAD and predicting the result of clot extraction. The aim of this simulation model is to obtain the minimum pressure necessary to extract the clot and to verify that both the pressure and the time required to complete the clot extraction are realistic for use in clinical situations, and are consistent with any experimentally obtained data. We therefore consider aspects of rheology and mechanics in our modeling.

A machine learning approach to identify clinical trials involving nanodrugs and nanodevices from ClinicalTrials.gov

BACKGROUND: Clinical Trials (CTs) are essential for bridging the gap between experimental research on new drugs and their clinical application. Just like CTs for traditional drugs and biologics have helped accelerate the translation of biomedical findings into medical practice, CTs for nanodrugs and nanodevices could advance novel nanomaterials as agents for diagnosis and therapy. Although there is publicly available information about nanomedicine-related CTs, the online archiving of this information is carried out without adhering to criteria that discriminate between studies involving nanomaterials or nanotechnology-based processes (nano), and CTs that do not involve nanotechnology (non-nano). Finding out whether nanodrugs and nanodevices were involved in a study from CT summaries alone is a challenging task. At the time of writing, CTs archived in the well-known online registry ClinicalTrials.gov are not easily told apart as to whether they are nano or non-nano CTs-even when performed by domain experts, due to the lack of both a common definition for nanotechnology and of standards for reporting nanomedical experiments and results. METHODS: We propose a supervised learning approach for classifying CT summaries from ClinicalTrials.gov according to whether they fall into the nano or the non-nano categories. Our method involves several stages: i) extraction and manual annotation of CTs as nano vs. non-nano, ii) pre-processing and automatic classification, and iii) performance evaluation using several state-of-the-art classifiers under different transformations of the original dataset. RESULTS AND CONCLUSIONS: The performance of the best automated classifier closely matches that of experts (AUC over 0.95), suggesting that it is feasible to automatically detect the presence of nanotechnology products in CT summaries with a high degree of accuracy. This can significantly speed up the process of finding whether reports on ClinicalTrials.gov might be relevant to a particular nanoparticle or nanodevice, which is essential to discover any precedents for nanotoxicity events or advantages for targeted drug therapy.

Eccentric Exercise in Treatment of Patellar Tendinopathy in High Level Basketball Players. A Randomized Clinical Trial.

Chronic patellar tendinopathy is a common pathology in sporting population. To date, there is no agreed upon protocol as election treatment. Eccentric exercises have been used with satisfactory outcomes (3). The purpose of this trial was to compare the effects of two eccentric exercise protocols.