Erosive potential of sugar-free hard candies dissolved in water and artificial saliva

Aim: To compare the acidity of sugar-free hard candies dissolved in water and artificial saliva. Methods: Sugar-free Flopi Florestal hard candies (grape, strawberry, cherry, orange, ginger, lemon balm, fennel) were selected and grouped in 2 groups: G-1 (candies dissolved in distilled water) and G-2 (candies dissolved in artificial saliva). Candies were triturated with a porcelain pestle, yielding two samples of 20 g. Samples were dissolved in 120 mL distilled water (G-1) and 120 mL artificial saliva (20 mM NaHCO3, 3 mM NaH2PO4.H2O and 1 mM CaCl2.2H2O) (G-2), obtaining three samples of 30 mL for each of the flavors and groups. pH was measured using potentiometer and combined glass electrode. Titratable acidity was evaluated by adding 100 μL 1M NaOH aliquots until reaching pH 5.5. For statistical analysis, analysis of variance (ANOVA) was used. Means were compared by the Tukey test at 5% significance level (p<0.05) Results: All flavors of G-1 showed pH values below 5.5. Comparison of groups in the same flavor showed a significant increase in pH in flavors of G-2. Comparison of the titratable acidity between G-1 and G-2, showed that fruit flavors were significantly different from each other, with reduced acidity in G-2. Conclusions: All evaluated candies are acid, and dilution in artificial saliva raised their pH and lowered their titratable acidity, reducing their erosive potential.

Bioactive compounds of citrus as health promoters

Citrus are a group of fruit species, quite heterogeneous in many aspects, including chemical composition of the fruit. Since ancient times, some citrus fruits were used to prevent and cure human diseases. In the recent decades, it has been demonstrated that fruits can actually help prevent and cure some diseases and above all, they are essential in a balanced diet. Citrus fruits, as one of the groups of fruit species, with greater importance in the world, have been studied for their effects on human health. Some species of citrus were referred as potential antioxidant based therapy for heart disease, cancer and inflammation. Fruit peels and seeds have also high antioxidant activity. The health benefits of citrus fruit have mainly been attributed to the high level of bioactive compounds, such as phenols (e.g., flavanone glycosides, hydroxycinnamic acids), carotenoids and vitamin C. These compounds are present in the fruit pulp and hence in the juice. But some bioactive compounds can be found in parts of the fruit which usually are not used for human food. The content of bioactive compounds depends on the species and cultivar, but also depends on the production system followed in the orchard. Citrus fruits, their derivatives and their by-products (peel, pulp and oil) are reach in different bioactive compounds and its maturity, postharvest and agroindustry processes influence their composition and concentration. The aim of this chapter was to review the main bioactive compounds of the different components of citrus and their relationship to health.

Bebidas espirituosas do Algarve

Tese de Doutoramento, Química, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Stevia rebaudiana (Bert.) Bertoni incorporação em uma receita de bolo

Trabalho Complementar apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de licenciada em Ciências da Nutrição

Enhancement of the total phenolic compounds and antioxidant activity of aqueous Citrus limon L. pomace extracts using microwave pre-treatment on the dry powder

The effect of microwave pre-treatment on the levels of total phenolic compounds, flavonoids, proanthocyanidins and individual major compounds as well as the total antioxidant activity of the dried lemon pomace was investigated. The results showed that microwave pre-treatment significantly affected all the examined parameters. The total phenolic content, total flavonoids, proanthocyanidins, as well as the total antioxidant activity significantly increased as the microwave radiation time and power increased (e.g., 2.5 folds for phenolics, 1.4 folds for flavonoids and 5.5 folds for proanthocyanidins), however irradiation more than 480 W for 5 min resulted in the decrease of these parameters. These findings indicate that microwave irradiation time and power may enhance higher levels of the phenolic compounds as well as the antioxidant capacity of the dried lemon pomace powder. However, higher and longer irradiation may lead to a degradation of phenolic compounds and lower the antioxidant capacity of the dried lemon pomace.

Quality of Pond Sediments

This powerpoint presentation discusses sediments in 18 sample ponds in Myrtle Beach, Charleston and Hilton Head. It attempts to answer the questions: How contaminated are bottom sediments in typical coastal stormwater ponds? and Do these contaminant levels have the potential to pose ecological and human health risks? Charts of findings are included.

Citrus as a component of the Mediterranean Diet

Citrus are native to southeastern Asia, but are present in the Mediterranean basin for centuries. This group of species has reached great importance in some of the Mediterranean countries and, in the case of orange, mandarin and lemon trees, they found here soil and climatic conditions which allows them to achieve a high level of fruit quality, even better than in the regions where they came from. Citrus fruits are present in the diet of the peoples living on the Mediterranean basin, at least since the time of the Roman Empire. In the 20th century they became the main crop in various agricultural areas of the Mediterranean, playing an important role in the landscape, in the diet of the overall population, and also in international trade. They are present in the gardens of palaces and monasteries, but also in the courtyards and orchards of the poorest families. Their fruits are not only a refreshing dessert, but also a condiment, or even a major component of many dishes. Citrus fruits have well-documented nutritional and health benefits. They can actually help prevent and cure some diseases and, above all, they are essential in a balanced and tasty diet.

Effect of edible coatings with essential oils on the quality of red raspberries over shelf-life

The objective of the present work was to develop stategies for raising the shelf-life of red raspberries (Rubus idaeus L.). The quality of red raspberries over shelf-life after coated with alginate plus Brazilian Citrus essential oils was evaluated. Edible coatings did not significantly influence the firmness loss, soluble solids content (SCC), and brightness of fruits over time, when compared to control, nevertheless all edible coatings with essential oils induced higher weight loss than those samples in which the essential oils were not incorporated. Fruits coated with alginate plus lime essential oil (0.2%) or orange essential oil (0.1%) after 15 days of storage had less red skin, but were darker than the remaining samples. The less red colour verified in these samples was also coincident with the lower concentration of anthocyanins at the end of the experiment as well as the lower capacity for scavenging ABTS free radicals or quenching singlet oxygen. The edible coatings supplemented with the essential oil of orange either at 0.1 % or 0.2 % were very efficient to control the yeasts and moulds growth after 15 days of storage. To control the development of aerobic mesophilic bacteria the use of essential oil of lemon 0.2% and essential oil of orange 0.1% were the most efficient. The essential oils used in the edible coatings did not significantly change the sensorial properties of the fruit. Cyanidin-3-O-sophoroside, cyanidin-3-O-glucosylrutinoside, cyanidin-3-O-xylosylrutinoside, cyanidin-3-O-glucoside, cyanidin-3-O-rutinoside, pelargonidin-3-O-sophoroside, pelargonidin-3-O-glucosylrutinoside, pelargonidin 3-O-glucoside, pelargonidin 3-O-rutinoside were found in raspberries fruits. An unknown cyanidin derivative was also found in all samples, constituting 27.4% of total anthocyanin content.

Metodologia para medição da potência necessária ao corte por um triturador florestal.

Resumo: Para execução do processo de raleamento na Caatinga é importante utilizar máquinas do tipo rotores trituradores acoplados em tratores de baixa potência, visando a diminuição de tempo e mão-de-obra dos agricultores familiares na, implantação de sistemas de exploração sustentáveis, sistemas agrossilvipastoris. Para o projeto de uma máquina que seja acessível a estes produtores, o primeiro passo é se conhecer a potência de corte necessária para a operação de raleamento. O objetivo deste trabalho foi desenvolver e avaliar uma metodologia de ensaio para medir a potência durante o corte de uma espécie arbórea, podendo assim avaliar os parâmetros a serem utilizados futuramente no projeto da máquina. Como espécie teste, utilizou-se o eucalyptus citriodora, por ser uma madeira que apresenta resistência de corte elevada e similar ao das espécies da Caatinga. Observou-se que a metodologia proposta, ao padronizar os procedimentos, permitiu adquirir de forma rápida e precisa os valores dos parâmetros de importância no projeto de máquinas destinadas a cortar e triturar espécies arbóreas. Também a utilização dos dados obtidos por meio da aplicação da metodologia, possibilitam maior confiabilidade e precisão no projeto de máquinas destinadas a este tipo de trabalho. [Methodology for obtaining the cutting power of a forest crusher]. Abstract: For executions the thinning process in Caatinga is important to use machines as Rotors Crushers coupled in low- power tractors, aimed at decrease of time and hand labor of Family Farmers in the implementation of sustainable exploration systems, agrosylvopastoral Systems. For the project for the design of a machine that is accessible these producers, the first step is knowing the cut power needed for a thinning operation. The objective of this study was to develop and evaluate a test methodology to measure the power during the cutting of a tree species and can evaluate the cutting parameters used in the future in machine design. As a test species, we used the eucalyptus citriodora, as this wood has cut high resistance and similar to Species of Caatinga. It was observed that the methodology proposal, to the standardize procedures, allows to get quickly and accurately the values of importance parameters in the design of machines designed to cut and grind tree species. Also the use of data obtained through the application of the methodology , enable greater reliability and precision in machine design intended for this type of work.