Estudo da hidrogenação para pulverização de ligas à base de terras raras com Nb para eletrodos de hidreto metálico

Neste trabalho foram estudadas as series de ligas La0,7Mg0,3Al0,3Mn0,4Co(0,5-x)NbxNi3,8 (x =0 a 0,5) e La0,7Mg0,3Al0,3Mn0,4Nb(0,5-x)Ni(3,8-x) (x =0,3; 0,5 e 1,3), como eletrodo negativo de baterias de Níquel Hidreto Metálico. A pulverização das ligas foi realizada com duas pressões de H2 (2 bar e 9 bar). A capacidade de descarga das baterias de níquel hidreto metálico foi analisada pelo equipamento de testes elétricos Arbin BT-4. As ligas, no estado bruto de fusão, foram analisadas por microscopia eletrônica de varredura (MEV), espectroscopia de energia dispersiva (EDS) e difração de raios-X. Com o aumento da concentração de nióbio nas ligas nota-se a diminuição da estabilidade cíclica das baterias e da capacidade máxima de descarga. A capacidade de descarga máxima obtida foi para a liga La0,7Mg0,3Al0,3Mn0,4Co0,5Ni3,8 (45,36 mAh) e a bateria que apresentou a melhor performance foi a liga La0,7Mg0,3Al0,3Mn0,4Co0,4Nb0,1Ni3,8 (44,94 mAh).

Reutilização de baterias automotivas como fonte alternativa de energia.

Atualmente um dos principais objetivos na área de pesquisa tecnológica é o desenvolvimento de soluções em favor do Meio Ambiente. Este trabalho tem por objetivo demonstrar a reutilização e consequentemente o aumento da vida útil de uma bateria Chumbo-Ácido, comumente instaladas em veículos automóveis, bem como beneficiar locais e usuários remotos onde o investimento na instalação de linhas de transmissão se torna inviável geográfica e economicamente, utilizando a luz solar como fonte de energia. No entanto a parte mais suscetível a falhas são as próprias baterias, justamente pela vida útil delas serem pequenas (em torno de 3 anos para a bateria automotiva) em comparação com o restante do sistema. Considerando uma unidade que já foi usada anteriormente, a possibilidade de falhas é ainda maior. A fim de diagnosticar e evitar que uma simples bateria possa prejudicar o funcionamento do sistema como um todo, o projeto considera a geração de energia elétrica por células fotovoltaicas e também contempla um sistema microcontrolado para leitura de dados utilizando o microcontrolador ATmega/Arduino, leitura de corrente por sensores de efeito hall da Allegro Systems, relés nas baterias para abertura e fechamento delas no circuito e um sistema de alerta para o usuário final de qual bateria está em falha e que precisa ser reparada e/ou trocada. Esse projeto foi montado na Ilha dos Arvoredos SP, distante da costa continental em aproximadamente 2,0km. Foram instaladas células solares e um banco de baterias, a fim de estudar o comportamento das baterias. O programa pôde diagnosticar e isolar uma das baterias que estava apresentando defeito, a fim de se evitar que a mesma viesse a prejudicar o sistema como um todo. Por conta da dificuldade de locomoção imposta pela geografia, foi escolhido o cartão SD para o armazenamento dos dados obtidos pelo Arduino. Posteriormente os dados foram compilados e analisados. A partir dos resultados apresentados podemos concluir que é possível usar baterias novas e baterias usadas em um mesmo sistema, de tal forma que se alguma das baterias apresentar uma falha o sistema por si só isolará a unidade.

Adult Attachment Style on the MMPI-2: Does an Elevated Scale 4 Predict Dismissing Attachment?

This study examines some aspects of Caldwell's (200 I) hypotheses about the adaptations associated with elevations on the clinical scales of the Minnesota Multiphasic Personality Assessment-2 (MMPI-2). The argument is made that the adaptation to early rejection and neglect, which he attributes to Scale 4, parallels the adaptation represented by a dismissing attachment. Archival data of 72 individuals who completed assessment batteries that included both the MMPI-2 and that Adult Attachment Projective (AAP) were analyzed to determine if there was a relationship between elevations on Scale 4 and classification as dismissing attachment. No significant relationship was found for the primary hypothesis; however, some small effects were noted in related exploratory analyses. Possible reasons for the lack of a significant result are discussed a well as directions for future research.

Sinterização flash do condutor catiônico beta-alumina sintetizada pelo método dos precursores poliméricos.

A beta-alumina de sódio é uma cerâmica condutora de íons Na+ utilizada como eletrólito sólido em baterias de sódio para armazenamento de energias intermitentes como energia solar e eólica. Devido ao alto teor de sódio, esse material é instável a altas temperaturas, podendo sofrer variações de composição durante a etapa de sinterização convencional que utiliza altas temperaturas por longos períodos de tempo. A sinterização flash é uma técnica de sinterização ativada por corrente elétrica que proporciona a densificação de compactos cerâmicos em poucos segundos, a temperaturas notavelmente mais baixas que as convencionais. Uma vez obrigatória a passagem de corrente elétrica através da amostra, a sinterização flash de qualquer material condutor parece bastante razoável. Não obstante, até o presente momento a maioria dos trabalhos publicados sobre o assunto aborda apenas condutores de vacância de oxigênio ou semicondutores, materiais compatíveis com eletrodos de platina (Pt). Nesse trabalho a sinterização flash de um condutor catiônico foi estudada utilizando-se a beta-alumina como material modelo. A beta-alumina foi sintetizada pelo método dos precursores poliméricos, caracterizada e então submetida à sinterização flash. O material de eletrodo padrão (platina) provou ser um eletrodo bloqueador em contato com a beta-alumina. O sucesso da sinterização flash foi determinado pela troca do material de eletrodo por prata (Ag), o que possibilitou uma reação eletroquímica reversível nas interfaces eletrodo-cerâmica e possibilitou a obtenção de um material densificado com morfologia e composição química homogêneas. Devido à metaestabilidade da beta-alumina, a atmosfera dos experimentos precisou ser alterada para manter a integridade desse material rico em um metal alcalino (Na+). A sinterização flash de um condutor catiônico é apresentada pela primeira vez na literatura e ressalta a importância da reação de eletrodo, que é um fator limitante para o sucesso da sinterização flash e precisa ser estudada e adaptada para cada tipo de material.

Muro Mediterráneo: búnkeres y baterías para la defensa del litoral (1936-1939)

The Mediterranean wall, which is a collection of defensive constructions along the coast, was built during the Spanish War (1936-39) to prevent enemy attacks. It´s called this way like the Atlantic Wall, which was built after the Second World War. These group of buildings consist of batteries, bunkers and barracks placed along the coastline, sometimes next to another kind of infrastructure. Its location (typical of a military strategy) and its peculiar morphology are like another ones: the historical watchtowers ones. They were built by the Kingdom of Spain in the same geography four centuries earlier although, in our case, the buildings are updated to the conditions of contemporary wars: camouflage against air raids. A collection of anti-aircraft devices, placed along the coast since the late 1937, were risen following the instructions of the Valencian State to defend both citizens and cities from the aviation´s bombings. The following military settlements, organized from North to South, are part of the most relevant ones of the coast of Alicante: the Denia and Javea ones, the North of Alicante and Southwest of Alicante ones, the Portichol one, the Galvany´s Clot one and, finally, the Cape and Bay of Santa Pola ones. Remains of more than 60 architectural elements, that document the first concrete´s ruins, are still there. This paper tries to document all of them (providing their location, their morphological genealogy and including some drawings of the current state) to contribute to their revaluation and to help to their necessary protection. They are a legacy of architectural heritage which consolidates and increases the memory of our culture.

Levantando las arquitecturas de las guerras en la costa del Mediterráneo (1936-1939)

During the civil war (1936-39) was built a network of defensive settlements on the coast in anticipation of attacks enemies, forming the so-called 'wall Mediterranean', because of its similarity with the Wall Atlantic of the World War II. These enclaves were composed of groups of batteries, bunkers and buildings. This communication comes to inventory and draw the remains of more than 50 architectures that are located in the Valencian South Coast (from Denia to Torrevieja), documenting the first ruins of hormigion armed with our history. It's a set of military settlements anti-aircraft, mostly scattered coastal rural, which are a great heritage and landscape value, and from which planes haven't been preserved. It is to lift current state record of them all, proceeding to its typological classification, in order to contribute to its assessment and protection on the grounds that they constitute a legacy of architectural heritage that increases our cultural memory.history.

Pseudocapacitance of zeolite-templated carbon in organic electrolytes

Carbon and graphene-based materials often show some amount of pseudocapacitance due to their oxygen-functional groups. However, such pseudocapacitance is generally negligible in organic electrolytes and has not attracted much attention. In this work, we report a large pseudocapacitance of zeolite-templated carbon (ZTC) based on the oxygen-functional groups in 1 M tetraethylammonium tetrafluoroborate dissolved in propylene carbonate (Et4NBF4/PC). Due to its significant amount of active edge sites, a large amount of redox-active oxygen functional groups are introduced into ZTC, and ZTC shows a high specific capacitance (330 F g−1). Experimental results suggest that the pseudocapacitance could be based on the formation of anion and cation radicals of quinones and ethers, respectively. Moreover, ZTC shows pseudocapacitance also in 1 M lithium hexafluorophosphate dissolved with a mixture of ethylene carbonate and diethyl carbonate (LiPF6/EC+DEC) which is used for lithium-ion batteries and lithium-ion capacitors.

Design of Activated Carbon/Activated Carbon Asymmetric Capacitors

Supercapacitors are energy storage devices that offer a high power density and a low energy density in comparison with batteries. Their limited energy density can be overcome by using asymmetric configuration in mass electrodes, where each electrode works within their maximum available potential window, rendering the maximum voltage output of the system. Such asymmetric capacitors are optimized using the capacitance and the potential stability limits of the electrodes, with the reliability of the design largely depending on the accuracy and the approach taken for the electrochemical characterization. Therefore, the performance could be lower than expected and even the system could break down, if a well thought out procedure is not followed. In this work, a procedure for the development of asymmetric supercapacitors based on activated carbons is detailed. Three activated carbon materials with different textural properties and surface chemistry have been systematically characterized in neutral aqueous electrolyte. The asymmetric configuration of the masses of both electrodes in the supercapacitor has allowed to cover a higher potential window, resulting in an increase of the energy density of the three devices studied when compared with the symmetric systems, and an improved cycle life.

Charles Town, South Carolina: with a chart of the bars & harbour

by R. Cowley.

Charleston Harbor, South Carolina, 1863 (Raster Image)

This layer is a georeferenced raster image of the historic paper map: Charleston Harbor and its approaches showing the positions of the Rebel-batteries, [by] U.S. Coast Survey. It was published in 1863 by Lith. of J. Bien. Scale 1:30,000. Nautical chart covering Charleston Harbor and a portion of Charleston, South Carolina. The image inside the map neatline is georeferenced to the surface of the earth and fit to the South Carolina State Plane Coordinate System (in Meters) (Fipszone 3900). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, railroads, houses, vegetation, drainage, military batteries and fortifications, coastal features (shoals, rocks, channels, floating batteries, etc.) and more. Overprinted to show 1/4-mile concentric circles centered on St. Michaels, Charleston; positions occupied by the Union Army and Navy; "Rebel batteries in possession of National forces [and] batteries still held by the Rebels [on] Sept. 7th 1863." Union positions are based "on the authority of Maj. T.B. Brooks." Relief shown by hachures; depths shown by soundings and shading. This layer is part of a selection of digitally scanned and georeferenced historic maps of the Civil War from the Harvard Map Collection. Many items from this selection are from a collection of maps deposited by the Military Order of the Loyal Legion of the United States Commandery of the State of Massachusetts (MOLLUS) in the Harvard Map Collection in 1938. These maps typically portray both natural and manmade features, in particular showing places of military importance. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Fort Sanders, Knoxville, Tennessee,and vicinity, 1863 (Raster Image)

This layer is a georeferenced raster image of the untitled historic paper manuscript map: [Map of Fort Sanders, Knoxville, Tennessee, and vicinity showing troop lines]. It was sketched ca.1863. Scale not given. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Tennessee State Plane Coordinate System (in Meters) (Fipszone 4100). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, troop location, fortifications, batteries, selected points of military interest, and more. Relief shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps of the Civil War from the Harvard Map Collection. Many items from this selection are from a collection of maps deposited by the Military Order of the Loyal Legion of the United States Commandery of the State of Massachusetts (MOLLUS) in the Harvard Map Collection in 1938. These maps typically portray both natural and manmade features, in particular showing places of military importance. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Narragansett Bay, Rhode Island, 1777 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: A topographical chart of the bay of Narraganset in the province of New England : with all the isles contained therein, among which Rhode Island and Connonicut have been particularly surveyed, shewing the true position & bearings of the banks, shoals, rocks &c. as likewise the soundings, to which have been added the several works & batteries raised by the Americans, taken by order of the principal farmers on Rhode Island, by Charles Blaskowitz. It was published in 1777 by Wm. Faden. Scale [ca. 1:50,000]. Nautical chart showing American Revolution military defenses and points of interest. Covers the Narraganset Bay region, Rhode Island. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Rhode Island State Plane Coordinate System (Feet) (FIPS 3800). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, selected buildings, farms, military defenses and structures, drainage, and more. Relief shown by hachures. Depths shown by soundings and form lines. Includes text, "References to the batteries," and "A list of the principal farms in Rhode Island." This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and map purposes.

Boston, Massachusetts and vicinity, showing Revolutionary War fortification sites, 1788 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Boston with its environs, [by] T. Conder, sculpt. The map was originally published in: William Gordon's The history of the rise, progress, and establishment, of the independence of the United States of America, 1788. Scale [ca. 1:53,360]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows Revolutionary War features such as positions of troops, redoubts, batteries, and forts, etc. It also shows features such as roads, drainage, selected public buildings and residences, and more. Relief is shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps of Massachusetts from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates (1755-1922), scales, and purposes. The digitized selection includes maps of: the state, Massachusetts counties, town surveys, coastal features, real property, parks, cemeteries, railroads, roads, public works projects, etc.

A Comparison of the Impacts of Lithium Extraction and Lithium Recycling Processes

Lithium is used in the cathode and electrolyte of rechargeable batteries in many portable electronics and electric vehicles, and is thus seen as a critical component of modern technology (Gruber et al., 2011). Electric vehicles are promoted as a way to reduce carbon emissions associated with the transportation sector, which accounts for 14.3% of anthropogenic greenhouse gas emissions (OECD International Transport Forum, 2010). However, the sustainability of lithium procurement will influence the overall environmental impact of this proposed “green” solution. It is estimated that 66% of the world’s lithium resource is contained in natural brines, 24% in pegmatites, and 8% in sedimentary rocks such as hectorite clays (Gruber et al., 2011). It has been shown that “[r]ecycling of lithium from Li-ion batteries may be a critical factor in balancing the supply of lithium with future demand” (Gruber et al., 2011). In an attempt to quantify energy and materials consumption associated with production of a unit of useful lithium compounds, industry reports and peer-reviewed scientific literature concerning lithium mining and lithium recycling were reviewed and compared. Other aspects of sustainability, such as waste or by-products produced in the production of a unit of useful lithium, were also explored. Thus, this paper will serve to further the evaluation of the comparative environmental consequences associated with lithium production via extraction versus recycling. Efficiencies must be made in both processes to maximize productivity while minimizing ecological harm.

ISSP Position Stand: To Test or Not to Test? The Use of Physical Skill Tests in Early Phases of Sport Development

A Searching for talent and the assessing ability in young prospects from individual and team sports often include measurement, analysis, and evaluation of physical and motor skills. The use of these tests in early stages of talent development has been widely observed in both female and male prospects. The purpose of this paper is to review a series of studies conducted on talented and less-talented athletes/ players that were aimed at distinguishing between the two groups and at predicting the athletes’/players’ future achievements/success. Thirteen studies examining the use of physical and motor skill tests in young prospects are reviewed. Based on this review, four main observations are highlighted and a number of benefits and limitations associated with the use of such tests are discussed. It is recommended that (1) coaches reduce the number of batteries of physical and motor skill tests used in early phases of talent development and (2) coaches and sport scientists specializing in measurement and evaluation cooperate in order to improve the effectiveness of the application and interpretation of physical skill tests given to prospects at early stages of talent development.