Síntese e caracterização de espinélios a base de Cu, Fe e Cr para pigmentos cerâmicos

Inorganic pigment comprises a host lattice, which is part of the chromophore component (usually a transition metal cation) and possible components modifiers, which stabilize, add or restate the properties pigments. Among the materials with spinel, ferrites, and the chromite stand out, because they have broad technological importance in the area of materials, applicability, pigments, catalytic hydrogenation, thin film, ceramic tiles, among others. The present work, pigments containing CuFe2O4, CuCr2O4,e CuFeCrO4, were synthesized by a method that makes use of gelatin as organic precursor using their application to ceramic pigments. The pigments were characterized by X-ray diffraction (XRD), Infrared spectroscopy, scanning electron microscopy (SEM) spectroscopy in the UV-visible and Colorimetry. The results confirmed the feasibility of the synthetic route used, with respect to powders synthesized, there is the formation of spinel phase from 500°C, with an increase in crystallinity and the formation of other phases. The pigments were shown to be crystalline and the desired phases were obtained. The copper chromite have hues ranging from green to black according to the calcination temperature, while the copper chromite doped with iron had brownish. The ferrites showed copper color and darker brown to black, which may indicate an interesting factor because of the importance of black pigment

Fatores de eleição do destino turístico para a região norte de Portugal alto Trás-os-Montes: uma análise multivariada

O objetivo deste trabalho consiste em identificar os fatores de eleição do destino turístico para a região Norte de Portugal Alto Trás-os-Montes (ATM). Especificamente, visa-se: i) a identificação dos principais fatores motivacionais de eleição do destino turístico ATM; ii) a identificação dos principais fatores de atração de eleição do destino turístico ATM. Os fatores de eleição em análise foram selecionados com base na revisão da literatura turística e no modelo de Crompton (1979). Para tal, aplicou-se um inquérito por questionário aos visitantes nacionais e estrangeiros que se deslocaram à região ATM no período de agosto de 2013 a agosto de 2014, e os dados foram tratados tendo por base uma Análise Fatorial Exploratória. Dos resultados obtidos extraíram-se quatro Fatores Motivacionais que explicam 60.87% da variância total, a saber: 1) competências sócio e interculturais, 2) relacionamento e vivências interpessoais, 3) conveniência e lazer e 4) escape e autorrenovação. Por outro lado, identificaram-se quatro Fatores de Atração que explicam 62% da estrutura dos dados: 1) acolhimento e qualidade dos serviços, 2) animação e atrações turísticas, 3) facilitadores e promotores da viagem e 4) encantos rurais. Estes resultados podem ser utilizados para a aplicação de outras técnicas estatísticas e como um elemento informativo para os stakeholders da atividade turística.

Revestimentos a base de Ta/Al2O3 produzidos por aspersão térmica sobre substrato metálico

Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ° C, was effective in the reduction process of Ta2O5

Síntese, aplicação e avaliação do efeito do teor de fósforo da celulose fosfatada em argamassa de alvenaria com aditivo comercial a base de hidroxi-etil-metil celulose (HEMC)

Generally, cellulose ethers improves mortar properties such as water retention, workability and setting time, along with adherence to the substrate. However, a major disadvantage of the addition of cellulose ethers in mortars is the delay in hydration of the cement. In this paper a cellulose phosphate (Cp) was synthesized water soluble and has been evaluated the effect of their incorporation into mortar based on Portland cement. Cellulose phosphate obtained was characterized by spectrophotometry Fourier transform infrared (FTIR), X-ray diffraction (XRD), elemental analysis and scanning electron microscopy (SEM). Mortar compositions were formulated with varying phosphorus content in cellulose and cellulose phosphate concentrations, when used in partial or total replacement of the commercial additive based hydroxyethyl methyl cellulose (HEMC). The mortars formulated with additives were prepared and characterized by: testing in the fresh state (consistency index, water retention, bulk density and air content incorporated) and in the hardened state (absorption by capillarity, density, flexural and compression strength). In mixtures the proportion of sand:cement of 1:5 (v / v) and factor a / c = 1.31 and water were held constant. Overall, the results showed that the celluloses phosphates employed in mortars added acted significantly when partially substituting the commercial additive. With regard to consistency index, water retention and bulk density in the fresh state and absorption by capillarity and bulk density apparent in the hardened state, showed no appreciable differences as compared to the commercial additive. The incorporated air content in the fresh state reduced markedly, but did not affect other properties. The mortars with cellulose phosphate, partially replacing the commercial additive showed an improvement of the properties of flexural strength and compressive strength

Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C

Identificación de las distintas actividades económicas y productivas que ayudan a implementar el proceso de encadenamiento para lograr competitividad y desarrollo en la Asociación de mujeres emprendedoras en la zona norte del municipio de Santa Tecla en el área del volcán.

El municipio de Santa Tecla, posee actualmente 164,171 habitantes, con un 92% de la población urbana y 54% de la población son mujeres, posee una tasa de crecimiento poblacional del 3.65%.Por ser un municipio con diversas oportunidades para los ciudadanos y ciudadanas, que potencia los sectores de: industria, agricultura, comercio, pequña y mediana empresa, como ejes del desarrollo local y crecimiento económico, identificar el encadenamiento o cluster significaría un cambio radical en la cultura de negocios tradicional. Entendiendo como “cluster un sistema al que pertenecen empresas y ramas industriales que establecen vínculos de interdependencia funcional para el desarrollo de sus procesos productivos y para la obtención de determinados productos o, dicho de otro modo, un "cluster" podría definirse como un conjunto o grupo de empresas pertenecientes a diversos sectores, ubicadas en una zona geográfica limitada, interrelacionadas mutuamente en los sentidos vertical, horizontal y colateral en torno a unos mercados, tecnologías y capitales productivos que constituyen núcleos dinámicos del sector industrial, formando un sistema interactivo en el que, con el apoyo decidido de la Administración, pueden mejorar su competitividad. Lo expuesto anteriormente, motivó a proponer el presente trabajo de graduación “La Identificación de las distintas actividades económicas y productivas que posibilitan la implementación de procesos de encadenamiento para lograr competitividad y desarrollo en la asociación de mujeres emprendedoras ubicada en la zona norte del municipio de Santa Tecla en el área del volcán.” Para llevar a cabo la presente investigación se diseñaron los siguientes objetivos: OBJETIVO GENERAL Realizar un estudio de las distintas actividades económicas y productivas que posibiliten la implementación de procesos de encadenamiento para lograr competitividad y desarrollo en la asociación de mujeres emprendedoras, ubicada en la zona norte del municipio de Santa Tecla en el área del volcán. OBJETIVOS ESPECÍFICOS • Determinar qué actividades económicas y productivas contribuyen a potenciar el fenómeno del encadenamiento. • Identificar las fortalezas, oportunidades, debilidades y amenazas de las distintas actividades económicas y productivas que tienen potencial de encadenamiento. • Determinar el grado de contribución de la implementación de los procesos de encadenamiento económico y productivo, y la formación de una ventaja competitiva en el mercado Para cumplir estos objetivos se utilizó una metodología deductiva que nos permitió partir de lo general a lo particular, obtener información primaria a través de la aplicación de cuestionarios y la observación directa con la finalidad de obtener información que ayude a la propuesta de identificación. Posteriormente se procedió a tabular y analizar la información recopilada. Obteniendo como resultado la necesidad de implementar el encadenamiento en la Asociación de Mujeres Emprendedoras, mejorando las Actividades primarias y secundarias Con base al diagnóstico efectuado se concluye y se recomienda lo siguiente: CONCLUSIONES • Se logró identificar que las actividades de manufactura y comercialización de productos como: artesanías, dulces tradicionales, productos medicinales (noni), artículos de limpieza (desinfectantes de pisos); ayudaran a implementar el encadenamiento económico y productivo en la asociación. • En la actividad de operaciones la asociación de mujeres emprendedoras no posee un área administrativa y financiera que lleve el control de los ingresos y egresos, así también no cuentan con un medio de transporte para poder llevar sus productos al lugar de distribución. • En relación a la actividad de marketing y ventas estas son efectuadas solamente en ferias de emprendedoras y en la casa de la mujer tecleña, por lo que las ventas son bajas, pues no se posee un lugar fijo para poder ofrecer su producto en venta. RECOMENDACIONES • Implementar a través de un plan estratégico la búsqueda de ayuda de sectores financieros y comerciales para la obtención de créditos en el abastecimiento de insumos, así como también establecer relaciones comerciales con el fin de obtener planes de descuento por compras al contado. • Gestionar con instituciones gubernamentales y no gubernamentales un espacio físico permanente para la comercialización de sus productos. • Como recomendación final se sugiere a la asociación de mujeres emprendedoras, llevar a cabo el plan de mejora presentado en esta investigación.

Um olhar sobre o patrimônio histórico-arquitetônico de Assú/RN: análise com base na percepção dos usuários e no ponto de vista técnico

This research analyzes the actual Historic-Architectural Heritage of Assú City which is located in Rio Grande do Norte State, Brazil, the study is based on both Assú s residents perception and technician s viewpoint. It looks forward to expose this community s relationship with the existing number of historic buildings, the scale of people s identity to the place and the association of this perception toward the preservation and conservation s scale of the historic settlement. Since the contextualization of the degradation s process of central areas, the study draw nea initially the conceptual aspects, focusing on the debate about heritage and the preservationist practice. The work complements the discussion through an approach on people-environment relationship and environmental perception, considering relevant factors for planning process. The obtained and presented data had diagnosed the condition of the architectural pile and also allowed this work to formulate recommendations for the studied area and architectural set in order to contribute for future urban politics implementation that consider the building, which are not only important to the considered population, but to the Rio Grande do Norte s History, as well

Avaliação Pós-Ocupação da iluminação natural das salas dos setores de aulas teóricas da Universidade Federal do Rio Grande do Norte

The objective of this study is to assess the natural light of the classrooms sectors, at Universidade Federal do Rio Grande do Norte. It was applied the Post-Occupation Evaluation technique, by using questionnaires and brightness levels measurements inside the classrooms. In order to check the users satisfaction degree, it was initially done a general approach on the related aspects to natural light: their characteristics, availability, sources, opening systems and evaluating tools. It was also determined the necessary brightness levels for the activities development in the classroom and the Post-Occupation Evaluation technique used in the search analyses. Then, it was made the UFRN Campus` characterization; the models` definition which formed the data collection basis; the detailing of the procedures used in the research, the processing description and the data analysis. Subsequently, the results that clarify the issues raised were shown through quantitative and / or qualitative data analyses. This research notes a high level of satisfaction by the users, despite some problems such as the reflections occurrence on the board, the lack of uniformity and, occasionally, the brightness low levels

Desenvolvimento de um sistema misto de pasta à base de geopolímero e cimento portland para correção de perda de circulação

The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole

Interesses da habitação social : políticas e processos no Rio Grande do Norte

En 2003, le gouvernement brésilien (gestion Lula) a initié une nouvelle phase dans son histoire de l habitation, en intensifiant les constructions de logements sociaux au Brésil. Un tel accroissement a eut des répercussions tant en ville comme à la campagne, et fût marqué dans le Rio Grande do Norte, par la production a grande échelle d ensembles d habitations, dans les programmes de Gouvernement. Afin de viabiliser ces transformations, des instruments politiques, financiers et de gestion ont étés articulés conjointement, utilisant la répétition d une typologie d édification, comme modèle, accompagnée de la reproduction d une morphologie dans les constructions de logements sociaux. Afin de comprendre ce processus nous introduisons une recherche urbanistique et socio-économique du problème du logement social au Brésil, en cherchant à mettre en relation les aspects techniques avec les questions historique, professionnelles et culturelles, éléments complémentaires. Notre analyse cherche a identifier comment les politiques de gestion et financement officielles (administrées dans sa grande majorité par la Caisse Économique Fédérale -CEF-), influencent le processus de conception de projets, en provoquant les répétitions de type/morphologiques, déjà citées. Basée sur l observation directe au cour de deux expériences différenciées pour du logement social en milieu rural, au Rio Grande do Norte, nous montrerons aussi certaines limitations et possibilités des acteurs sociaux, face aux agents et politiques officielles pour le logement social au Brésil, proposant des solutions alternatives standardisées qui caractérisent le résultat des projets financées et gérés par la CEF. Nos principales références théoriques et méthodologiques sont Nabil Bonduki (1998), David Harvey (2009,1982), Henry Lefèbvre (1970), Ermínia Maricato (2010, 2009, 2000, 1987) et Raquel Rolnik (2010, 2009, 2008, 1997)

Caracterização da estruturação espacial dos povoamentos da epifauna do litoral rochoso do distrito de Mercúfi. província de Cabo Delgado (Norte de Moçambique), com uso de Sistema de Informação Geográfica: distribuição, abundância, diversidade e conservação

Dissertação de mest. em Estudos Marinhos e Costeiros, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2002

Estudo da molhabilidade de ligas de adição à base de prata sobre insertos cerâmicos para aplicação em brocas perfuração de poços de petróleo

Metal-ceramic interfaces are present in tricone drill bits with hard ceramic inserts for oil well drilling operations. The combination of actions of cutting, crushing and breaking up of rocks results in the degradation of tricone drill bits by wear, total or partial rupture of the drill bit body or the ceramic inserts, thermal shock and corrosion. Also the improper pressfitting of the ceramic inserts on the bit body may cause its total detachment, and promote serious damages to the drill bit. The improvement on the production process of metal-ceramic interfaces can eliminate or minimize some of above-mentioned failures presented in tricone drill bits, optimizing their lifetime and so reducing drilling metric cost. Brazing is a widely established technique to join metal-ceramic materials, and may be an excellent alternative to the common mechanical press fitting process of hard ceramic inserts on the steel bit body for tricone drill bit. Wetting phenomena plays an essential role in the production of metal/ceramic interfaces when a liquid phase is present in the process. In this work, 72Silver-28Copper eutectic based brazing alloys were melted onto zirconia, silicon nitride and tungsten carbide/Co substrates under high vacuum. Contact angle evolution was measured and graphically plotted, and the interfaces produced were analysed by SEM-EDX. The AgCu eutectic alloy did not wet any ceramic substrates, showing high contact angles, and so without chemical interaction between the materials. Better results were found for the systemns containing 3%wt of titanium in the AgCu alloy. The presence os titanium as a solute in the alloy produces wettable cand termodinamically stable compounds, increasing the ceramics wetting beahviour

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Preparação e caracterização de catalisadores à base de titânio suportado em MCM-41 para produção de compostos oxigenados através da pirólise catalítica do capim elefante

In recent years, the area of advanced materials has been considerably, especially when it comes to materials for industrial use, such as is the case with structured porosity of catalysts suitable for catalytic processes. The use of catalysts combined with the fast pyrolysis process is an alternative to the oxygenate production of high added value, because, in addition to increasing the yield and quality of products, allows you to manipulate the selectivity to a product of interest, and therefore allows greater control over the characteristics of the final product. Based on these arguments, in this work were prepared titanium catalysts supported on MCM-41 for use in catalytic pyrolysis of biomass, called elephant grass. The reactions of pyrolysis of biomass were performed in a micro pyrolyzer, Py-5200, coupled to GC / MS, the company CDS Corporation, headquartered in the United States. The catalysts Ti-MCM-41 in different molar ratios were characterized by XRD, TG / DTG, FT-IR, SEM, XRF, UV-visible adsorption of nitrogen and the distribution of particle diameter and specific surface area measurement by the BET method. From the catalytic tests it was observed that the catalysts synthesized showed good results for the pyrolysis reaction.The main products were obtained a higher yield of aldehydes, ketones and furan. It was observed that the best reactivity is a direct function of the ratio Si/Ti, nature and concentration of the active species on mesoporous supports. Among the catalysts Ti-MCM-41 (molar ratio Si / Ti = 25 and 50), the ratio Si / Ti = 25 (400 ° C and 600 ° C) favored the cracking of oxygenates such as acids , aldehydes, ketones, furans and esters. Already the sample ratio Si / Ti = 50 had the highest yield of aromatic oxygenates

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load