837 resultados para Apparel and footwear industry
Resumo:
Global climate change is one of the most significant environmental impacts at the moment. One central issue for the building and construction industry to address global climate change is the development of credible carbon labelling schemes for building materials. Various carbon labelling schemes have been developed for concrete due to its high contribution to global greenhouse gas (GHG) emissions. However, as most carbon labelling schemes adopt cradle-to-gate as system boundary, the credibility of the eco-label information may not be satisfactory because recent studies show that the use and end-of-life phases can have a significant impact on the life cycle GHG emissions of concrete in terms of carbonation, maintenance and rehabilitation, other indirect emissions, and recycling activities. A comprehensive review on the life cycle assessment of concrete is presented to holistically examine the importance of use and end-of-life phases to the life cycle GHG quantification of concrete. The recent published ISO 14067: Carbon footprint of products – requirements and guidelines for quantification and communication also mandates the use of cradle-to-grave to provide publicly available eco-label information when the use and end-of-life phases of concrete can be appropriately simulated. With the support of Building Information Modelling (BIM) and other simulation technologies, the contribution of use and end-of-life phases to the life cycle GHG emissions of concrete should not be overlooked in future studies.
Resumo:
Background In Australia, the profession of pharmacy has undergone many changes to adapt to the needs of the community. In recent years, concerns have been raised with evidence emerging of workforce saturation in traditional pharmacy practice sectors. It is not known how current final year pharmacy students’ perceive the different pharmacy career paths in this changing environment. Hence investigating students’ current experiences with their pharmacy course, interaction with the profession and developing an understanding of their career intentions would be an important step, as these students would make up a large proportion of future pharmacy workforce Objective The objective of this study was thus to investigate final year students’ career perspectives and the reasons for choosing pharmacy, satisfaction with this choice of pharmacy as a tertiary course and a possible future career, factors affecting satisfaction and intention of future career paths. Methods A quantitative cross sectional survey of final year students from 3 Australian universities followed by a qualitative semi-structured interview of a convenience sample of final year students from the University of Sydney. Results ‘Interest in health and medicine’ was the most important reason for choosing pharmacy (n=238). The majority of students were ‘somewhat satisfied’ with the choice of pharmacy (35.7%) as a course and possible future career. Positive associations were found between satisfaction and reasons for joining pharmacy such as ‘felt pharmacy is a good profession’ (p=0.003) while negative associations included ‘joined pharmacy as a gateway to medicine or dentistry’ (p=0.001). Quantitate and qualitative results showed the most frequent perception of community pharmacy was ‘changing’ while hospital and pharmaceutical industry was described as ‘competitive’ and ‘research’ respectively. The highest career intention was community followed by hospital pharmacy. Conclusion Complex factors including university experiences are involved in shaping students’ satisfaction and perception of career. This may relate to challenges in the community pharmacy sector, job opportunities in hospital and limited understanding of the pharmaceutical industry. The results offer insight for the profession in terms of entry into various roles and also to pharmacy educators for their roles in shaping curricula and placement experiences that attract future graduates to defined career pathways in pharmacy.
Resumo:
This study analyzed the relationship between the CO2 emissions of different industries and economic growth in OECD countries from 1970 to 2005. We tested an environmental Kuznets curve (EKC) hypothesis and found that total CO2 emissions from nine industries show an N-shaped trend instead of an inverted U or monotonic increasing trend with increasing income. The EKC hypothesis for sector-level CO2 emissions was supported in the (1) paper, pulp, and printing industry; (2) wood and wood products industry; and (3) construction industry. We also found that emissions from coal and oil increase with economic growth in the steel and construction industries. In addition, the non-metallic minerals, machinery, and transport equipment industries tend to have increased emissions from oil and electricity with economic growth. Finally, the EKC turning point and the relationship between GDP per capita and sectoral CO2 emissions differ among industries according to the fuel type used. Therefore, environmental policies for CO2 reduction must consider these differences in industrial characteristics. © 2013 Elsevier Ltd.
Resumo:
Foreign direct investment (FDI) is an effective conduit for technology transfer through technology spillovers to domestically owned firms in the host country. This study analyses the significance of productivity externalities of FDI to local firms, in terms of both intra-industry and inter-industry spillovers, using firm-level data from Kenya, Tanzania and Zimbabwe. The results show evidences in support of intra- and inter-industry productivity spillovers from FDI for Kenya and Zimbabwe. © 2010 Taylor & Francis.
Resumo:
The travel and tourism industry has come to rely heavily on information and communication technologies to facilitate relations with consumers. Compiling consumer data profiles has become easier and it is widely thought that consumers place great importance on how that data is handled by firms. Lack of trust may cause consumers to have privacy concerns and may, in turn, have an adverse impact on consumers’ willingness to purchase online. Three specific aspects of privacy that have received attention from researchers are unauthorized use of secondary data, invasion of privacy, and errors. A survey study was undertaken to examine the effects of these factors on both prior purchase of travel products via the Internet and future purchase probability. Surprisingly, no significant relationships were found to indicate that such privacy concerns affect online purchase behavior within the travel industry. Implications for managers are discussed.
Resumo:
The last two decades have witnessed a fragmentation of previously integrated systems of production and service delivery with the advent of boundary-less, networked and porous organisational forms. This trend has been associated with the growth of outsourcing and increased use of contingent workers. One consequence of these changes is the development of production/service delivery systems based on complex national and international networks of multi-tiered subcontracting increasingly labelled as supply chains. A growing body of research indicates that subcontracting and contingent work arrangements affect design and decision-making processes in ways that can seriously undermine occupational health and safety (OHS). Elaborate supply chains also present a regulatory challenge because legal responsibility for OHS is diffused amongst a wider array of parties, targeting key decision-makers is more difficult, and government agencies encounter greater logistical difficulties trying to safeguard contingent workers. In a number of industries these problems have prompted new forms of regulatory intervention, including mechanisms for sheeting legal responsibility to the top of supply chains, contractual tracking devices and increasing industry, union and community involvement in enforcement. After describing the problems just alluded to this paper examines recent efforts to regulate supply chains to safeguard OHS in the United Kingdom and Australia.
Resumo:
Housing affordability and sustainable development are not polarised ideologies as both are necessary with increasing urbanisation. We must bridge the gap between current median house pricing and target affordable house pricing whilst pursuing sustainability. This paper examines the potential of initial construction cost and ongoing utilities and transport cost reduction through the integration of sustainable housing design and transit oriented development principles in a Commuter Energy and Building Utilities System (CEBUS). It also introduces current research on the development of a Dynamic Simulation Model for CEBUS applications in the Australian property development and construction industry.
Resumo:
The upstream oil and gas industry has been contending with massive data sets and monolithic files for many years, but “Big Data” is a relatively new concept that has the potential to significantly re-shape the industry. Despite the impressive amount of value that is being realized by Big Data technologies in other parts of the marketplace, however, much of the data collected within the oil and gas sector tends to be discarded, ignored, or analyzed in a very cursory way. This viewpoint examines existing data management practices in the upstream oil and gas industry, and compares them to practices and philosophies that have emerged in organizations that are leading the way in Big Data. The comparison shows that, in companies that are widely considered to be leaders in Big Data analytics, data is regarded as a valuable asset—but this is usually not true within the oil and gas industry insofar as data is frequently regarded there as descriptive information about a physical asset rather than something that is valuable in and of itself. The paper then discusses how the industry could potentially extract more value from data, and concludes with a series of policy-related questions to this end.
Resumo:
Purpose: While the global education debate remains focused on graduate skills and employability, the absence of a shared language between student, academic and industry stakeholder groups means that defining industry skills requirements is both essential and difficult. The aim of this study was to assess graduate skills requirements in a knowledge intensive industry from a demand perspective as distinct from a curriculum (supply) viewpoint. Design/methodology/approach: Skills items were derived from a breadth of disciplines across academic, policy and industry literature. CEOs and senior managers in the innovation and commercialisation industry were surveyed regarding perceptions of skills in graduates and skills in demand by the firm. Two rounds of exploratory factor analyses were undertaken to examine employers’ perceptions of the skills gap. Findings: First order analysis resolved 10 broad constructs that represent cognitive, interpersonal and intrapersonal skills domains as applied in this industry. Knowledge, leadership and interprofessional collaboration feature as prominent skills. Second order analysis revealed employers’ perceptions of graduate skills specifically centre on organisational fit and organisational success. An over-arching theme relates to performance of the individual in organisations. Research limitations/implications: Our findings suggest that the discourse on employability and the design of curriculum need to shift from instilling lists of skills towards enabling graduates to perform in a diversity of workplace contexts and expectations centred on organisational purpose. Originality/value: In contrast to the heterogeneous nature of industry surveys, we targeted a homogenous sector that is representative of knowledge intensive industries. This study contributes to the broader stakeholder dialogue of the value and application of graduate skills in this and other industry sectors.
Resumo:
2,4,6-trinitrotoluene (TNT) is one of the most commonly used nitro aromatic explosives in landmine, military and mining industry. This article demonstrates rapid and selective identification of TNT by surface-enhanced Raman spectroscopy (SERS) using 6-aminohexanethiol (AHT) as a new recognition molecule. First, Meisenheimer complex formation between AHT and TNT is confirmed by the development of pink colour and appearance of new band around 500 nm in UV-visible spectrum. Solution Raman spectroscopy study also supported the AHT:TNT complex formation by demonstrating changes in the vibrational stretching of AHT molecule between 2800-3000 cm−1. For surface enhanced Raman spectroscopy analysis, a self-assembled monolayer (SAM) of AHT is formed over the gold nanostructure (AuNS) SERS substrate in order to selectively capture TNT onto the surface. Electrochemical desorption and X-ray photoelectron studies are performed over AHT SAM modified surface to examine the presence of free amine groups with appropriate orientation for complex formation. Further, AHT and butanethiol (BT) mixed monolayer system is explored to improve the AHT:TNT complex formation efficiency. Using a 9:1 AHT:BT mixed monolayer, a very low detection limit (LOD) of 100 fM TNT was realized. The new method delivers high selectivity towards TNT over 2,4 DNT and picric acid. Finally, real sample analysis is demonstrated by the extraction and SERS detection of 302 pM of TNT from spiked.
Resumo:
Erythropoietin (EPO), a glycoprotein hormone of ∼34 kDa, is an important hematopoietic growth factor, mainly produced in the kidney and controls the number of red blood cells circulating in the blood stream. Sensitive and rapid recombinant human EPO (rHuEPO) detection tools that improve on the current laborious EPO detection techniques are in high demand for both clinical and sports industry. A sensitive aptamer-functionalized biosensor (aptasensor) has been developed by controlled growth of gold nanostructures (AuNS) over a gold substrate (pAu/AuNS). The aptasensor selectively binds to rHuEPO and, therefore, was used to extract and detect the drug from horse plasma by surface enhanced Raman spectroscopy (SERS). Due to the nanogap separation between the nanostructures, the high population and distribution of hot spots on the pAu/AuNS substrate surface, strong signal enhancement was acquired. By using wide area illumination (WAI) setting for the Raman detection, a low RSD of 4.92% over 150 SERS measurements was achieved. The significant reproducibility of the new biosensor addresses the serious problem of SERS signal inconsistency that hampers the use of the technique in the field. The WAI setting is compatible with handheld Raman devices. Therefore, the new aptasensor can be used for the selective extraction of rHuEPO from biological fluids and subsequently screened with handheld Raman spectrometer for SERS based in-field protein detection.
Resumo:
In the United States, there has been fierce debate over state, federal and international efforts to engage in genetically modified food labelling (GM food labelling). A grassroots coalition of consumers, environmentalists, organic farmers, and the food movement has pushed for law reform in respect of GM food labelling. The Just Label It campaign has encouraged United States consumers to send comments to the United States Food and Drug Administration to label genetically modified foods. This Chapter explores the various justifications made in respect of genetically modified food labelling. There has been a considerable effort to portray the issue of GM food labelling as one of consumer rights as part of ‘the right to know’. There has been a significant battle amongst farmers over GM food labelling – with organic farmers and biotechnology companies, fighting for precedence. There has also been a significant discussion about the use of GM food labelling as a form of environmental legislation. The prescriptions in GM food labelling regulations may serve to promote eco-labelling, and deter greenwashing. There has been a significant debate over whether GM food labelling may serve to regulate corporations – particularly from the food, agriculture, and biotechnology industries. There are significant issues about the interaction between intellectual property laws – particularly in respect of trade mark law and consumer protection – and regulatory proposals focused upon biotechnology. There has been a lack of international harmonization in respect of GM food labelling. As such, there has been a major use of comparative arguments about regulator models in respect of food labelling. There has also been a discussion about international law, particularly with the emergence of sweeping regional trade proposals, such as the Trans-Pacific Partnership, and the Trans-Atlantic Trade and Investment Partnership. This Chapter considers the United States debates over genetically modified food labelling – at state, federal, and international levels. The battles often involved the use of citizen-initiated referenda. The policy conflicts have been policy-centric disputes – pitting organic farmers, consumers, and environmentalists against the food industry and biotechnology industry. Such battles have raised questions about consumer rights, public health, freedom of speech, and corporate rights. The disputes highlighted larger issues about lobbying, fund-raising, and political influence. The role of money in United States has been a prominent concern of Lawrence Lessig in his recent academic and policy work with the group, Rootstrikers. Part 1 considers the debate in California over Proposition 37. Part 2 explores other key state initiatives in respect of GM food labelling. Part 3 examines the Federal debate in the United States over GM food labelling. Part 4 explores whether regional trade agreements – such as the Trans-Pacific Partnership (TPP) and the Trans-Atlantic Trade and Investment Partnership (TTIP) – will impact upon
Resumo:
Industry clockspeed has been used in earlier literature to assess the rate of change of industries but this measure remains limited in its application in longitudinal analyses as well as in systemic industry contexts. Nevertheless, there is a growing need for such a measure as business ecosystems replace standalone products and organisations are required to manage their innovation process in increasingly systemic contexts. In this paper, we firstly derive a temporal measure of technological industry clockspeed, which evaluates the time between successively higher levels of performance in the industry's product technology, over time. We secondly derive a systemic technological industry clockspeed for systemic industry contexts, which measures the time required for a particular sub-industry to utilise the level of technological performance that is provisioned by another, interdependent sub-industry. In turn, we illustrate the use of these measures in an empirical study of the systemic personal computer industry. The results of our empirical illustration show that the proposed clockspeeds together provide informative measures of the pace of change for sub-industries and systemic industry. We subsequently discuss the organisational considerations and theoretical implications of the proposed measures.
Resumo:
In his 1987 book, The Media Lab: Inventing the Future at MIT, Stewart Brand provides an insight into the visions of the future of the media in the 1970s and 1980s. 1 He notes that Nicolas Negroponte made a compelling case for the foundation of a media laboratory at MIT with diagrams detailing the convergence of three sectors of the media—the broadcast and motion picture industry; the print and publishing industry; and the computer industry. Stewart Brand commented: ‘If Negroponte was right and communications technologies really are converging, you would look for signs that technological homogenisation was dissolving old boundaries out of existence, and you would expect an explosion of new media where those boundaries used to be’. Two decades later, technology developers, media analysts and lawyers have become excited about the latest phase of media convergence. In 2006, the faddish Time Magazine heralded the arrival of various Web 2.0 social networking services: You can learn more about how Americans live just by looking at the backgrounds of YouTube videos—those rumpled bedrooms and toy‐strewn basement rec rooms—than you could from 1,000 hours of network television. And we didn’t just watch, we also worked. Like crazy. We made Facebook profiles and Second Life avatars and reviewed books at Amazon and recorded podcasts. We blogged about our candidates losing and wrote songs about getting dumped. We camcordered bombing runs and built open‐source software. America loves its solitary geniuses—its Einsteins, its Edisons, its Jobses—but those lonely dreamers may have to learn to play with others. Car companies are running open design contests. Reuters is carrying blog postings alongside its regular news feed. Microsoft is working overtime to fend off user‐created Linux. We’re looking at an explosion of productivity and innovation, and it’s just getting started, as millions of minds that would otherwise have drowned in obscurity get backhauled into the global intellectual economy. The magazine announced that Time’s Person of the Year was ‘You’, the everyman and everywoman consumer ‘for seizing the reins of the global media, for founding and framing the new digital democracy, for working for nothing and beating the pros at their own game’. This review essay considers three recent books, which have explored the legal dimensions of new media. In contrast to the unbridled exuberance of Time Magazine, this series of legal works displays an anxious trepidation about the legal ramifications associated with the rise of social networking services. In his tour de force, The Future of Reputation: Gossip, Rumor, and Privacy on the Internet, Daniel Solove considers the implications of social networking services, such as Facebook and YouTube, for the legal protection of reputation under privacy law and defamation law. Andrew Kenyon’s edited collection, TV Futures: Digital Television Policy in Australia, explores the intersection between media law and copyright law in the regulation of digital television and Internet videos. In The Future of the Internet and How to Stop It, Jonathan Zittrain explores the impact of ‘generative’ technologies and ‘tethered applications’—considering everything from the Apple Mac and the iPhone to the One Laptop per Child programme.
Resumo:
Supermarkets in Australia may have substantial market power as buyers in wholesale markets for grocery products. They may also have substantial bargaining power in negotiating contracts with their suppliers of grocery products. The Competition and Consumer Act 2010 (Cth) (CCA) regulates misconduct by supermarkets as customer/acquirers in three ways. First, s 46(1) of the CCA prohibits the ‘taking advantage’ of buyer power for the purpose of damaging a competitor, preventing entry or deterring or preventing competitive conduct. Secondly, s 21 of the ACL prohibits unconscionable conduct in business–to–business transactions. Thirdly, Pt IVB of the CCA provides for the promulgation of mandatory and voluntary industry codes of conduct. Since 1 July 2015 the conduct of supermarkets as customer/acquirers has been regulated by the Food and Grocery Industry Code of Conduct. This article examines these three different approaches. It considers them against the background of the misconduct at issue in ACCC v Coles Supermarkets Australia Pty Ltd which the ACCC chose to litigate as an unconscionable conduct case, rather than a misuse of market power case. The article also considers the strengths and weaknesses of each of the three approaches and concludes that while the three approaches address different problems there is scope for overlap and all three should be retained for compete coverage.