Low-density polyethylene superhydrophobic surface by control of its crystallization behavior

A simple and inexpensive method for forming a low-density polyethylene (LDPE) superhydrophobic surface by controlling the crystallization behavior of LDPE by adjusting the crystallization time and nucleation rate has been proposed. The resulting porous surface, with hierarchical micro- and nanostructures on the beautiful floral designs, has a water contact angle of 173.0degrees +/- 2.5degrees.

Hydrodynamic radius characterization of a vinyl-type polynorbornene by size-exclusion chromatography with a static and dynamic laser light scattering detector

Both absolute molecular weight and molecular sizes (radius of gyration and hydrodynamic radius) of a vinyl-type polynorbornene eluting from size-exclusion chromatography columns were determined by combined with a static and dynamic laser light scattering detector. The hydrodynamic radius of polymer fraction eluting from size-exclusion chromatography columns was obtained from dynamic laser light scattering measurements at only a single angle of 900 by introducing a correction factor. According to the scaling relationship between molecular sizes and molecular weight and the ratio between radius of gyration and hydrodynamic radius, the vinyl-type polynorbornene took a random coil conformation in 1,2,4-trichlorobenzene at 150 degreesC.

Preparation and properties of microporous membrane from poly(vinylidene fluoride-co-tetrafluoroethylene) (F2.4) for membrane distillation

Flat-sheet microporous membranes from F2.4 for membrane distillation (MD) were prepared by phase inversion process. Dimethylacetamide (DMAC) and LiClO(4)(.)3H(2)O/trimethyl phosphate (TMP) were, respectively, used as solvent and pore-forming additives. The effects of casting solution composition, exposure time prior to coagulation and temperature of precipitation bath on F2.4 membrane structure were investigated. The morphology of resultant porous membrane was observed by scanning electron microcopy. Some natures of F2.4 porous membrane after drying in air, such as mechanical properties and hydrophobicity, were exhibited and compared with poly(vinylidene fluoride) (PVDF) membrane prepared by the same ways. Stress-at-break and strength stress of F2.4 microporous membrane are higher than that of PVDF membrane, and elongation percentage of F2.4 membrane at break is about eight-fold as great as that of PVDF membrane. Contact angle of F2.4 microporous membrane to water (86.6 +/- 0.51degrees) was also larger than that of PVDF mernbrane (80.0 +/- 0.78degrees). MD experiment was carried out using a direct contact membrane distillation (DCMD) configuration as final test to permeate performance of resultant microporous membrane.

Preparation and characterization of ordered yttrium arachidate multilayer

The behavior of arachidic acid on the surface of YCI3 aqueous subphase was studied by LB and Brewster angle microscopy techniques. The results showed that the pre-compressing time and the pH of the subphase played an important role in the forming of the monolayer. The monolayer on the subphase surface was irreversible. If the monolayer was compressed into wrinkles, the monolayer could not become uniform again. The optimum transferring conditions were selected and the ordered yttrium arachidate multilayer with a long spacing of 4.96 nm and a tilt angle of 28.5degrees of the three alkyl chains from the surface normal was fabricated and characterized.

Study of molecular orientation in Langmuir-Blodgett films by FTIR

The structure information of orientation and packing of molecular chains can be obtained from infrared transmission and reflection-absorbance (RA) spectra. In the present paper, on the basis of Umemura et al., their FORTRAN program of minicomputer was developed and can be run on 486 personal computer. By comparison of infrared transmission and RA intensities, surface enhancement factors and molecular orientation angle were calculated using the above program, and the influence of complex refractive index, angle of incidence, and thickness of LB film were discussed. These results are consistent with that of Umemura et al.

Plasma modification of aromatic polyamide reverse osmosis composite membrane surface

The surface of aromatic polyamide reverse osmosis composite membrane was modified by oxygen and argon plasma. The water permeability of oxygen-plasma-modified membrane increases, and the chlorine resistance of argon-plasma-modified membrane increases. The spectra of the attenuated total reflection-Fourier transform infrared and X-ray photoelectron spectroscopy and the contact angle of the water were analyzed to explain the improvement of the two performances of the composite membrane. The carboxyl groups were introduced when modified by oxygen plasma, and cross-linking occurred when modified by argon plasma. (C) 1997 John Wiley & Sons, Inc.

EPITAXIAL CRYSTALLIZATION OF HIGH-DENSITY POLYETHYLENE ON POLYPROPYLENE IN SOLUTION-CAST FILMS

Epitaxial crystallization of high-density polyethylene (HDPE) on isotactic polypropylene (iPP) in solution-cast films has been investigated by electron microscopy. The specimen-tilt technique of electron microscopy has been used to study the structural relationship between HDPE and iPP crystals. HDPE exhibits different crystalline morphologies in the two basic types of iPP spherulite textures, cross-hatched and lathlike regions. In the former, the crystallographic c axis of HDPE lamellae is in the film plane, while in the latter, the c axis of HDPE crystallites is at an angle of about 50-degrees with the normal of the film. In both structural regions of iPP, however, the contact planes of epitaxial growth are (0 1 0) for iPP and (1 0 0) for HDPE.

心理旋转中的整体优先效应及其机制

In the history of psychology research, more attention had been focused on the relation between local processing and global processing. For the global information and the local information, which is processed earlier? And which is processed faster? Precedence of the global over the local level in visual perception has been well established by Navon with compound stimuli, and Navon’s original study gave rise to many publications, including replications, generalization to other kinds of stimuli (nonverbal material, digits), populations (infants, children, brain-damaged subjects), and tasks (lateral visual hemifield presentation, copy drawing, memory recognition, and recall), and triggered some debate about the conditions in which global precedence is and is not observed (number, size, sparsity, and goodness of the stimuli, exposure duration, etc.). However, whether there is a global advantage or precedence in other cognitive processes was less tested. Most researches had suggested that there was a functional equivalency between visual perception and visual image processing. However, it’s still unknown whether there will be a global advantage on mental rotation. In the present study, we combined the mental rotation task with the compound stimuli to explore whether the global or local advantage also existed at the mental imagery transformation stages. In two pilot studies, the perceptual global precedence was found to be present in a normal/mirror-image judgment task when the stimuli exposure time was short; while the stimuli exposure time was prolonged (stimuli kept available till subjects’ response) the perceptual global precedence was showed to be eliminated. In all of the subsequent experiments, stimili would be presented till subjects’ response. Then mental rotation was added in normal/mirror-image judgment (some of the stimuli were rotated to certain angles from upright) in normal experiments, experiment 1 and 2 observed a global advantage on mental rotation both with a focused-attention design (Experiment 1) and divided-attention design (Experiment 2). Subjects’ reaction times were increased with rotation angles, and the accuracy was decreased with rotation angles, suggesting that subject need a mental rotation to make a normal/mirror judgment. The most important results were that subjects’ response to global rotation was faster than that to local rotation. The analysis of slope of rotation further indicated that, to some extend, the speed of global rotation was faster than that of local rotation. These results suggest a global advantage on mental rotation. Experiment 3 took advantage of the high temporal resolution of event-related potentials to explore the temporal pattern of global advantage on mental rotation. Event-related potential results indicated the parietal P300 amplitude was inversely related to the character orientation, and the local rotation task delayed the onset of the mental-rotation-related negativity at parietal electrodes. None clear effect was found for occipital N150. All these results suggested that the global rotation was not only processed faster than local rotation, but also occurred earlier than local rotation. Experiments 4 and 5 took the effect size of global advantage as the main dependent variable, and visual angle and exposure duration of the stimuli as independent variables, to examine the relationship between perceptual global precedence and global advantage on mental rotation. Results indicated that visual angle and exposure duration did not influence the effect size of global advantage on mental rotation. The global advantage on mental rotation and the perceptual global advantage seemed to be independent but their effects could be accumulated at some condition. These findings not only contribute to revealing a new processing property of mental rotation, but also deepen our understanding of the problem of global/local processing and shed light on the debate on locus of global precedence.

Green Theorems and Qualitative Properties of the Optical Flow

How can one compute qualitative properties of the optical flow, such as expansion or rotation, in a way which is robust and invariant to the position of the focus of expansion or the center of rotation? We suggest a particularly simple algorithm, well-suited to VLSI implementations, that exploits well-known relations between the integral and differential properties of vector fields and their linear behaviour near singularities.

The aesthetics of he eyes and mouth position in a three-point face schema

Oculographical research of people watching a human face indicates than beholder's eyes stop most often and for the longest period of time on the eyes and the mouth of the face looked at and that they move among these three points most frequently. The position of the eyes and mouth in relation to one another can be described with a single number being a measure of an angle with the vertex in the middle of the mouth and with arms crossing the centers of the eye pupils. The angles were measured from photographs of people from all over the world, as well as of residents of Lublin. Subsequently, the subjects from Lublin were asked to make face schemas by positioning the eyes and the mouth in the way they considered most attractive. The eye-mouth-eye angle of these schemas was measured. Additionally, measurements of the same angle were taken from the faces depicted in icons. The schemas of the most attractive - according to the subjects - faces were characterized by angles approximating the mean angle from the photographs, and significantly greater than the mean angle from the icons.

Crianças Respiradoras Bucais e possíveis tratamentos Ortodônticos

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

Infrared spectra of C2H2 under jet-cooled and para-H2 matrix conditions

In spectra of jet-cooled C2H2 recorded with an FTIR spectrometer, the ν5, ν4 + ν5, ν3 and ν2 + ν4 + ν5 bands all exhibit an intensity distribution corresponding to ∼6 K for rotation, with no evidence of nuclear spin conversion. Spectra of C2H2 isolated in solid p-H2 show no evidence of rotation of C2H2. The strong interaction between ν3 and ν2 + ν4 + ν5 in the gas phase is diminished in solid p-H2. Lines associated with dimer, trimer and tetramer of C2H2 are identified. Spectral features characteristic of solid state acetylene are observed under jet-cooled conditions. © 2007 Elsevier B.V. All rights reserved.

Electrochemical and FTIR characterization of the self-assembled monolayer of 2-mercaptobenzimidazole on Au(1 1 1)

The behaviour of a self-assembled monolayer of 2-mercaptobenzimidazole (MBI) at the Au(111) electrode has been examined using cyclic voltammetry and in situ FTIR spectroscopy. The charge associated with the reductive desorption is pH independent while the oxidative partial redeposition charge increases when the pH is lowered. This is due to differences between the nature and the solubility of the MBI desorption product. In alkaline and neutral media MBI desorbs as the thiolate. In contrast, in acidic solutions the thiol is the desorbed product. Subtractively normalized interfacial reflection Fourier transform absorption spectroscopy (SNIFTIRS) has been applied to investigate the MBI monolayer in contact with aqueous solutions of different pH. The SNIFTIRS data are in agreement with the electrochemical results. Moreover, quantitative analysis of the IR data provided evidence that adsorbed MBI molecules assume a tilted orientation with an angle of 60±5° between the C2 axis of the molecule and the direction normal to the gold surface. © 2003 Elsevier B.V. All rights reserved.

Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity

The overall objective of this work is to develop a computational model of particle degradation during dilute-phasepneumatic conveying. A key feature of such a model is the prediction of particle breakage due to particle–wall collisions in pipeline bends. This paper presents a method for calculating particle impact degradation propensity under a range of particle velocities and particle sizes. It is based on interpolation on impact data obtained in a new laboratory-scale degradation tester. The method is tested and validated against experimental results for degradation at 90± impact angle of a full-size distribution sample of granulated sugar. In a subsequent work, the calculation of degradation propensity is coupled with a ow model of the solids and gas phases in the pipeline.

Analysis and modeling of heaping behavior of granular mixtures within a computational mechanics framework

This paper presents a continuum model of the flow of granular material during filling of a silo, using a viscoplastic constitutive relation based on the Drucker-Prager plasticity yield function. The performed simulations demonstrate the ability of the model to realistically represent complex features of granular flows during filling processes, such as heap formation and non-zero inclination angle of the bulk material-air interface. In addition, micro-mechanical parametrizations which account for particle size segregation are incorporated into the model. It is found that numerical predictions of segregation phenomena during filling of a binary granular mixture agree well with experimental results. Further numerical tests indicate the capability of the model to cope successfully with complex operations involving granular mixtures.