830 resultados para Análise de componentes independentes de ordem superior


Relevância:

50.00% 50.00%

Publicador:

Resumo:

In this research, the drying process of acerola waste was investigated by using a spouted bed drier. The process was conducted using high density polyethylene inert particles with the objective of producing an ascorbic acid-rich final product. The fruit waste was ground and used to prepare different water-maltodextrin suspensions. Initially, fluidynamical experiments were conducted in order to evaluate the feeding effect on the spouted bed drier fluidynamics behavior. The experimental planning 23 + 3 was used to investigate the effect of the following variables: solids concentration, drying air temperature, intermittence time, production efficiency, solids retention and product losses by elutriation of fine particles on drier walls. The effect of selected independent variables on the drier stability was also evaluated based on a parameter defined as the ratio between the feed suspension volume and the total inert particles volume. Finally, the powder quality was verified in experiments with fixed feed flow and varying air drying temperature, drying air velocity and intermittence time. It was observed that the suspension interferes in the spouted bed drier fluidynamics behavior, and higher air flow is necessary to stabilize the drier. The suspension also promotes the expansion of the spouted bed diameter, decreases the solid circulation and favors the air distribution at the flush area. All variables interfere in the spouted bed performance, and the solids concentration has a major effect on the material retention and losses. The intermittence time also has great effect on the stability and material retention. When it comes to production efficiency, the main effect observed was the drying air temperature. First order models were well adjusted to retention and losses data. The acerola powder presented ascorbic acid levels around 600 to 700 mg/100g. Similar moisture and ascorbic acid levels were obtained for powders obtained by spouted bed and spray drier. However, the powder production efficiency of the spray drier was lower when compared to spouted bed drier. When it comes to energetic analysis, the spray drier process was superior. The results obtained for spouted bed drier are promising and highly dependent on the operational parameters chosen, but in general, it is inferred that this drying process is adequate for paste and suspension drying

Relevância:

50.00% 50.00%

Publicador:

Resumo:

The suprachiasmatic nucleus (SCN) of the anterior hypothalamus, together with the intergeniculate leaflet (IGL) of the thalamus are considered the central components of the circadian timing system (CTS) of mammals. This system is responsible for the generation and regulation of circadian rhythms by establishing a temporal organization of physiological processes and behaviors. The neuronal specific nuclear protein (NeuN) has been widely used as a neuronal marker in several studies. Since glial fibrillary acidic protein (GFAP) is a component of intermediate filaments found in the cytoplasm of astrocytes and is commonly used as a specific marker for these cells. This study aims to identify, in the marmoset, the NeuN immunoreactive neurons and glial cells immunoreactive to GFAP, as well as map the major route of photic synchronization of the STC, retinohypothalamic tract (RHT), and identify the indirect pathway to the SCN and pregeniculate nucleus (PGN) - structure homologous to IGL rodents, using immunohistochemical and cytoarchitectonic techniques. Observed in SCN the presence of neurons immunoreactive to NeuN and terminals immunoreactive subunit b of cholera toxin (CTb), neuropeptide Y (NPY) and serotonin (5- HT). In the PGN noted the presence of the NeuN and NPY immunoreactive neurons and the immunoreactive terminals CTb and 5-HT. Astrocytes are present throughout the extent of the SCN and the PGN this New World primate

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Esta pesquisa teve por objetivo refletir sobre o ensino instrumental da leitura em inglês, através da utilização de componentes visuais para auxiliar leitores na construção do significado. Com pressupostos teóricos baseados principalmente em Swales (1990); Soares (1993); Bronckart (1999); Joly (2002); Santaella (1983, 2000); Magno e Silva (2002, 2004); e Field (2004), efetuamos um estudo descritivo das características semiótico-discursivas presentes em manuais de instalação de softwares com enfoque nos recursos visuais. Além disso, coletamos dados e descrevemos os procedimentos pedagógicos observados em uma turma de Inglês Instrumental do Curso Superior de Tecnologia em Redes de Computadores, da Faculdade de Tecnologia da Amazônia (FAZ), em Belém. Nossa pesquisa-ação objetivou também investigar em que medida os componentes visuais podem influenciar o leitor nas suas escolhas de leitura; de que forma os componentes visuais podem ser utilizados em atividades de pré-leitura, leitura e pós-leitura para conduzir o leitor à compreensão do sentido do texto; e qual a importância dos componentes visuais na leitura de manuais de instalação de softwares. Os resultados da análise foram sucessivamente alterando a coleta seqüencial dos dados e mostraram que os componentes visuais são excelentes ferramentas que, quando bem utilizadas e associadas às palavras, podem incentivar e simplificar o processamento da leitura, especialmente num contexto em que os participantes não possuem pleno domínio lingüístico na língua-alvo.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Binary systems are key environments to study the fundamental properties of stars. In this work, we analyze 99 binary systems identified by the CoRoT space mission. From the study of the phase diagrams of these systems, our sample is divided into three groups: those whose systems are characterized by the variability relative to the binary eclipses; those presenting strong modulations probably due to the presence of stellar spots on the surface of star; and those whose systems have variability associated with the expansion and contraction of the surface layers. For eclipsing binary stars, phase diagrams are used to estimate the classification in regard to their morphology, based on the study of equipotential surfaces. In this context, to determine the rotation period, and to identify the presence of active regions, and to investigate if the star exhibits or not differential rotation and study stellar pulsation, we apply the wavelet procedure. The wavelet transform has been used as a powerful tool in the treatment of a large number of problems in astrophysics. Through the wavelet transform, one can perform an analysis in time-frequency light curves rich in details that contribute significantly to the study of phenomena associated with the rotation, the magnetic activity and stellar pulsations. In this work, we apply Morlet wavelet (6th order), which offers high time and frequency resolution and obtain local (energy distribution of the signal) and global (time integration of local map) wavelet power spectra. Using the wavelet analysis, we identify thirteen systems with periodicities related to the rotational modulation, besides the beating pattern signature in the local wavelet map of five pulsating stars over the entire time span.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Binary systems are key environments to study the fundamental properties of stars. In this work, we analyze 99 binary systems identified by the CoRoT space mission. From the study of the phase diagrams of these systems, our sample is divided into three groups: those whose systems are characterized by the variability relative to the binary eclipses; those presenting strong modulations probably due to the presence of stellar spots on the surface of star; and those whose systems have variability associated with the expansion and contraction of the surface layers. For eclipsing binary stars, phase diagrams are used to estimate the classification in regard to their morphology, based on the study of equipotential surfaces. In this context, to determine the rotation period, and to identify the presence of active regions, and to investigate if the star exhibits or not differential rotation and study stellar pulsation, we apply the wavelet procedure. The wavelet transform has been used as a powerful tool in the treatment of a large number of problems in astrophysics. Through the wavelet transform, one can perform an analysis in time-frequency light curves rich in details that contribute significantly to the study of phenomena associated with the rotation, the magnetic activity and stellar pulsations. In this work, we apply Morlet wavelet (6th order), which offers high time and frequency resolution and obtain local (energy distribution of the signal) and global (time integration of local map) wavelet power spectra. Using the wavelet analysis, we identify thirteen systems with periodicities related to the rotational modulation, besides the beating pattern signature in the local wavelet map of five pulsating stars over the entire time span.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Faced with an agribusiness expansion scenario and the increase in fertilizer consumption due to the exponential growth of the population, it is necessary to make better use of existing reserves, by obtaining products of better quality and in adequate quantities to meet demand national. In Tapira Mining Complex, Vale Fertilizantes, the phosphate concentrate is produced with content of 35.0% P2O5 from ore with content of about 8.0% P2O5, which are intended to supply Complex Industrial Uberaba and Araxá Minero Chemical Complex for the production of fertilizers. The industrial flotation step responsible for the recovery of P2O5 and hence the viability of the business is divided into the crumbly, grainy and ultrathin circuits, and, friable and granular concentrate comprise the conventional concentrated. Today only 14.7% of the mass which feeds the mill product becomes, the remainder being considered losses in the process, and the larger mass losses are located in the waste of flotation, representing 42.3%. From 2012 to 2014, the daily global mass recovery processing plants varied from 12.4 to 15.9% while the daily metallurgical recovery of P2O5 from 48.7 to 82.4%. By the degree of variability, it appears that the plant operated under different conditions. Seen this, this study aimed to analyze the influence of operational and process variables in P2O5 mass and metallurgical recoveries of industrial flotation circuits of grainy, crumbly and ultrathin. And besides was made an analysis of the effect of ore variables, as degrees, hardnesse and the ore front 02 percentage, in global recoveries of processing plant and the effect of dosages of reagents in the recoveries obtained from the bench flotation using the experimental design methodology. All work was performed using the historical database of Vale Fertilizantes of Tapira-MG, where all independent variables were dimensionless as the experimental range used. To make the statistical analysis it used the response surface technique and the values of the independent variables that maximize recoveries were found by canonical analysis. In the study of industrial flotation circuit crispy were obtained from 41.3% mass recovery and 91.3% metallurgical recovery P2O5, good values for the circuit, and the highest recoveries occur for solids concentration of the new flotation power between 45 and 50%, which values are assigned to the residence time of the pulp in cells and industrial flotation columns. The greater the number of ore heaps resumed on the higher the mass recovery, but in this scenario flotation becomes unstable because there is enormous weight variation in the feed. Higher recoveries are obtained for mass depressant dosage exceeding 120 g / t for synthetic collector dosage of 11.6%. In the study of industrial flotation circuit of the granulate were obtained 28.3% to 79.4% mass recovery and metallurgical recovery of P2O5 being considered good values for the circuit. Higher recoveries are obtained when the front ore 02 percentage is above 90%, because the ore of this front have more clear apatite. Likewise recoveries increase when the level of pulp rougher step is highest due to the high mass of circulating step receives loads. In the analysis of industrial flotation circuit of the ultrafine were obtained 23.95% of mass recovery, and the same is maximized to depressant dosage and the top collector 420 and 300 g / t, respectively. The analysis of the influence of variables ore, it was observed that higher recoveries are obtained for ores with P2O5 content above 8.0%, Fe2O3 content in the order of 28% forward and 02 of ore percentage of 83%. Hard ore percentage has strong influence on recoveries due to mass division in the circuit that is linked to this variable. However, the hard ore percentage that maximizes recoveries was very close to the design capacity of the processing plant, which is 20%. Finally, the study of the bench flotation, has noted that in friable and granular circuits the highest recoveries are achieved for a collector dosage exceeding 250 g / t and the simultaneous increase of collector dosage and synthetic collector percentage contributes to the increase recovery in the flotation, but this scenario is suitable to produce a concentrate poorer in terms of P2O5 content, showing that higher recovery is not always the ideal scenario. Thus, the results show the values of variables that provide higher recoveries in the flotation and hence lower losses in the waste.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Objetiva investigar as principais causas da indicação recorrente de determinados dispositivos do Regimento Interno da Câmara dos Deputados (RICD) no levantamento de questões de ordem, durante a 53ª Legislatura.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Analisa se o Poder Executivo define a pauta do Poder Legislativo, por meio de uma reflexão sobre a separação de poderes, o presidencialismo de coalizão e o poder de agenda. Apresenta um breve estudo sobre as Medidas Provisórias, importante instrumento legislativo, utilizado pelo Poder Executivo com base em atribuição constitucional

Relevância:

40.00% 40.00%

Publicador:

Resumo:

A Nova Lei de Diretrizes e Bases da Educação Brasileira (LDB 9.394/96) prevê que a educação superior promova criticidade, reflexibilidade, correlação de saberes, mas também o incentivo ao trabalho de pesquisa e investigação científica, visando ao desenvolvimento da ciência e da tecnologia e da criação e difusão da cultura e, desse modo, desenvolver o entendimento do homem e do meio em que vive. (Artigo 43, inciso III). Entretanto, pouco se ouve sobre essas questões a partir da voz do orientador de pesquisas acadêmicas, o que esta pesquisadora considera um problema de ordem social, tendo em vista a importância desses atores sociais para o campo acadêmico. Os poucos trabalhos que abordam o tema limitam-se a identificar o orientador a partir das impressões empíricas dos orientandos e a refletir as atuações a partir de questões político-educacionais (FLECHA, 2003; MAZZILLI, 2003; BIANCHETTI & MACHADO, 2006). Neste sentido, o presente trabalho procura responder, através da Análise Crítica do Discurso (ACD), o que os orientadores têm a dizer sobre sua prática social. De caráter interpretativo (ALVEZ-MAZZOTTI, 1999), conta com dados gerados por orientadores de mestrado em Linguística/Linguística Aplicada, das esferas federal, estadual e privada, do Rio de janeiro, sendo dois participantes de cada esfera. Na primeira etapa, os sujeitos responderam a uma entrevista semiestruturada. A segunda etapa consta de: a) um questionário; b) correspondências eletrônicas; c) os regimentos dos programas de pós-graduação; e d) revisão histórica da orientação no Brasil. O caráter social deste estudo é a relação dialética entre linguagem e sociedade, já que a ACD considera qualquer evento discursivo ao mesmo tempo um texto (primeira dimensão), uma prática discursiva (segunda dimensão) e uma prática social (terceira dimensão): o modelo tridimensional (FAIRCLOUGH, 2001). O Sistema de Transitividade da LSF pautou a análise da primeira dimensão, confirmando outros estudos sobre o ranking da recorrência dos processos (LIMA LOPES, 2001). A interpretação dessa primeira dimensão aponta que os orientadores atuam na idiossincrasia, e que os principais atores sociais desse fazer são o orientador e o orientando, em relação assimétrica de poder. Na segunda dimensão, a interdiscursividade reforça essa idiossincrasia, mas inclui as pressões institucionais, que agem como reguladoras desse fazer. Na terceira dimensão, os resultados sugerem que aspectos históricos justificam a queda da qualidade dos mestrandos, associando a isso um interesse político, e as características da pós-modernidade a uma nova e híbrida atuação. Além disso, os resultados apontam para um discurso de resistência à hegemonia nas três dimensões de análise. A pesquisa possibilitou ainda a discussão em torno de aspectos práticos: a) a reflexão dos sujeitos sobre seus papeis e atribuições; e b) a atualização do aporte teórico, aplicado a um tema ainda pouco explorado. Deste trabalho, fica um convite a novas pesquisas sobre o discurso do orientador, trazendo à tona não apenas sua voz, conforme a fala literal de um dos entrevistados, mas também contribuições diretas e significativas aos estudos em Linguística e Linguística Aplicada no Brasil