ASSISTÊNCIA DE SAÚDE ÀS MULHERES MUÇULMANAS NO BRASIL: UMA ANÁLISE DA RELAÇÃO ENTRE O SISTEMA RELIGIOSO ISLÂMICO E A POLÍTICA NACIONAL DE ATENÇÃO INTEGRAL À SAÚDE DA MULHER.

A presente dissertação tem por objetivo analisar os aspectos religiosos islâmicos e as implicações das relações de gênero no islam sobre a assistência de saúde às mulheres muçulmanas, e através disto, discutir a importância do conhecimento prévio do islamismo pelos profissionais de saúde para propor uma assistência de saúde congruente a estas mulheres, tendo por referência a Política Nacional de Atenção Integral à Saúde da Mulher. Esta pesquisa tem abordagem qualitativa, com o desenvolvimento de pesquisa de campo e aplicação de um roteiro de perguntas semi-estruturado, com questões relacionadas ao islamismo e à saúde das mulheres. Ao todo, foram entrevistadas dez pessoas, sendo estas: quatro mulheres revertidas ao islam, três mulheres de família muçulmana, dois sheiks e uma assistente social. As entrevistas foram realizadas no Centro de Divulgação do Islam para a América Latina e o Caribe (CDIAL) e na Assembléia Mundial da Juventude Islâmica na América Latina (WAMY).

Sistema de conversão de energia eólica baseado no gerador de indução duplamente alimentado: análise e contribuição ao controle da máquina

The humanity reached a time of unprecedented technological development. Science has achieved and continues to achieve technologies that allowed increasingly to understand the universe and the laws which govern it, and also try to coexist without destroying the planet we live on. One of the main challenges of the XXI century is to seek and increase new sources of clean energy, renewable and able to sustain our growth and lifestyle. It is the duty of every researcher engage and contribute in this race of energy. In this context, wind power presents itself as one of the great promises for the future of electricity generation . Despite being a bit older than other sources of renewable energy, wind power still presents a wide field for improvement. The development of new techniques for control of the generator along with the development of research laboratories specializing in wind generation are one of the key points to improve the performance, efficiency and reliability of the system. Appropriate control of back-to-back converter scheme allows wind turbines based on the doubly-fed induction generator to operate in the variable-speed mode, whose benefits include maximum power extraction, reactive power injection and mechanical stress reduction. The generator-side converter provides control of active and reactive power injected into the grid, whereas the grid-side converter provides control of the DC link voltage and bi-directional power flow. The conventional control structure uses PI controllers with feed-forward compensation of cross-coupling dq terms. This control technique is sensitive to model uncertainties and the compensation of dynamic dq terms results on a competing control strategy. Therefore, to overcome these problems, it is proposed in this thesis a robust internal model based state-feedback control structure in order to eliminate the cross-coupling terms and thereby improve the generator drive as well as its dynamic behavior during sudden changes in wind speed. It is compared the conventional control approach with the proposed control technique for DFIG wind turbine control under both steady and gust wind conditions. Moreover, it is also proposed in this thesis an wind turbine emulator, which was developed to recreate in laboratory a realistic condition and to submit the generator to several wind speed conditions.

Análise de tensões integrada a sistema de engenharia reversa para projeto e confecção de próteses

This work consists of the conception, developing and implementation of a Computational Routine CAE which has algorithms suitable for the tension and deformation analysis. The system was integrated to an academic software named as OrtoCAD. The expansion algorithms for the interface CAE genereated by this work were developed in FORTRAN with the objective of increase the applications of two former works of PPGEM-UFRN: project and fabrication of a Electromechanincal reader and Software OrtoCAD. The software OrtoCAD is an interface that, orinally, includes the visualization of prothetic cartridges from the data obtained from a electromechanical reader (LEM). The LEM is basically a tridimensional scanner based on reverse engineering. First, the geometry of a residual limb (i.e., the remaining part of an amputee leg wherein the prothesis is fixed) is obtained from the data generated by LEM by the use of Reverse Engineering concepts. The proposed core FEA uses the Shell's Theory where a 2D surface is generated from a 3D piece form OrtoCAD. The shell's analysis program uses the well-known Finite Elements Method to describe the geometry and the behavior of the material. The program is based square-based Lagragean elements of nine nodes and displacement field of higher order to a better description of the tension field in the thickness. As a result, the new FEA routine provide excellent advantages by providing new features to OrtoCAD: independency of high cost commercial softwares; new routines were added to the OrtoCAD library for more realistic problems by using criteria of fault engineering of composites materials; enhanced the performance of the FEA analysis by using a specific grid element for a higher number of nodes; and finally, it has the advantage of open-source project and offering customized intrinsic versatility and wide possibilities of editing and/or optimization that may be necessary in the future

Análise da atividade cognitiva do operador de sala de controle da produção de controle da produção de petróleo on-shore: uma abordagem da ergonomia para a gestão das restrições do sistema sociotécnico

This master's thesis aims to analyze the activity of the operators in a control room of the processes of production on-shore petroleum, with a focus on sociotechnical restrictions that interfere in the decision-making process and the actions of operators and therefore, the strategies (individual and collective) to regulate and maintain the operator action required and the safety of the system, together. The activity in focus involves the supervision and control of the production of thousands of barrels of oil/day in a complex and dispersed production’s structures built in an extension of 80 km. This operational framework highlights the importance of this activity for the fulfilment of the targets local and corporate efficiency, good management of the environment, health and safety of operators. This is an exploratory research and in the field, which uses the methodology of Ergonomic Analysis of the Work, composed of observational techniques and interactional, having as locus control room of the processes of production on-shore oil of an oil company. The population of this research is formed by operators in the control room of an Brazilian oil company. The results showed that the supervisory activity and control of the superheated steam injection is an complex context, demands greater attention, concentration, calculations, comparisons, trend analysis and decision making. The activity is collectively constructed between the control room operator, field operator and the supplier of steam. The research showed that the processes of communication and collaboration between the control room , fields and support staff are the key elements of this activity. The study shows that the operators have the autonomy and the elements necessary for work; and that there is continuous investments to improve the technology used and that the operators report sleep disturbances as a result of chronic exposure to night work. The study contributed with proposals for transformation of this activity: with regard to the installation of a area reserved for food in control room, the update the screens of the supervisory current operating condition, the periodic visits by room operators in the field, standardization of production reports, development assistance and standardization of nomenclature of controlling stations steam systems, to improve the conditions of realization of the activity, improve the quality of products produced by operators and contribute to reduce the possibility of slips or shifts in the activity.

Análise de confiabilidade de um moto-ventilador centrífugo: aplicação no sistema de pressurização de subestação industrial para garantia da segurança operacional na indústria petroquímica

The need of the oil industry to ensure the safety of the facilities, employees and the environment, not to mention the search for maximum efficiency of its facilities, makes it seeks to achieve a high level of excellence in all stages of its production processes in order to obtain the required quality of the final product. Know the reliability of equipment and what it stands for a system is of fundamental importance for ensuring the operational safety. The reliability analysis technique has been increasingly applied in the oil industry as fault prediction tool and undesirable events that can affect business continuity. It is an applied scientific methodology that involves knowledge in engineering and statistics to meet and or analyze the performance of components, equipment and systems in order to ensure that they perform their function without fail, for a period of time and under a specific condition. The results of reliability analyzes help in making decisions about the best maintenance strategy of petrochemical plants. Reliability analysis was applied on equipment (bike-centrifugal fan) between the period 2010-2014 at the Polo Petrobras Guamaré Industrial, situated in rural Guamaré municipality in the state of Rio Grande do Norte, where he collected data field, analyzed historical equipment and observing the behavior of faults and their impacts. The data were processed in commercial software reliability ReliaSoft BlockSim 9. The results were compared with a study conducted by the experts in the field in order to get the best maintenance strategy for the studied system. With the results obtained from the reliability analysis tools was possible to determine the availability of the centrifugal motor-fan and what will be its impact on the security of process units if it will fail. A new maintenance strategy was established to improve the reliability, availability, maintainability and decreased likelihood of Moto-Centrifugal Fan failures, it is a series of actions to promote the increased system reliability and consequent increase in cycle life of the asset. Thus, this strategy sets out preventive measures to reduce the probability of failure and mitigating aimed at minimizing the consequences.

Modelagem e análise dinâmica de um sistema de conversão de energia eólica dotado de gerador síncrono de imã permanente utilizando a plataforma ATP

Human development requires a broad balance between ecological, social and economic factors in order to ensure its own sustainability. In this sense, the search for new sources of energy generation, with low deployment and operation costs, which cause the least possible impact to the environment, has been the focus of attention of all society segments. To do so, the reduction in exploration of fossil fuels and the encouragement of using renewable energy resources for distributed generation have proved interesting alternatives to the expansion of the energy matrix of various countries in the world. In this sense, the wind energy has acquired an increasingly significant role, presenting increasing rates of power grid penetration and highlighting technological innovations such as the use of permanent magnet synchronous generators (PMSG). In Brazil, this fact has also been noted and, as a result, the impact of the inclusion of this source in the distribution and sub-transmission power grid has been a major concern of utilities and agents connected to Brazilian electrical sector. Thus, it is relevant the development of appropriate computational tools that allow detailed predictive studies about the dynamic behavior of wind farms, either operating with isolated load, either connected to the main grid, taking also into account the implementation of control strategies for active/reactive power generation and the keeping of adequate levels of voltage and frequency. This work fits in this context since it comprises mathematical and computational developments of a complete wind energy conversion system (WECS) endowed with PMSG using time domain techniques of Alternative Transients Program (ATP), which prides itself a recognized reputation by scientific and academic communities as well as by electricity professionals in Brazil and elsewhere. The modeling procedures performed allowed the elaboration of blocks representing each of the elements of a real WECS, comprising the primary source (the wind), the wind turbine, the PMSG, the frequency converter, the step up transformer, the load composition and the power grid equivalent. Special attention is also given to the implementation of wind turbine control techniques, mainly the pitch control responsible for keeping the generator under the maximum power operation point, and the vector theory that aims at adjusting the active/reactive power flow between the wind turbine and the power grid. Several simulations are performed to investigate the dynamic behavior of the wind farm when subjected to different operating conditions and/or on the occurrence of wind intensity variations. The results have shown the effectiveness of both mathematical and computational modeling developed for the wind turbine and the associated controls.

Modelação e análise de um sistema flexível de produção

A modelação dos sistemas industriais apresenta para as organizações uma vantagem estratégica no domínio do estudo dos seus processos produtivos. Através da modelação será possível aumentar o conhecimento sobre os sistemas podendo permitir, quando possível, melhorias na gestão e planeamento da produção. Este conhecimento poderá permitir também um aumento da eficiência dos processos produtivos, através da melhoria ou eliminação das principais perdas detetadas no processo. Este trabalho tem como principal objetivo o desenvolvimento e validação de uma ferramenta de modelação, previsão e análise para sistemas produtivos industriais, tendo em vista o aumento do conhecimento sobre estes. Para a execução e desenvolvimento deste trabalho, foram utilizadas e desenvolvidas várias ferramentas, conceitos, metodologias e fundamentos teóricos conhecidos da bibliografia, como OEE (Overall Equipment Effectiveness), RdP (Redes de Petri), Séries Temporais, Kmeans, ou SPC (Statistical Process Control). A ferramenta de modelação, previsão e análise desenvolvida e descrita neste trabalho, mostrou-se capaz de auxiliar na deteção e interpretação das causas que influenciam os resultados do sistema produtivo e originam perdas, demonstrando as vantagens esperadas. Estes resultados foram baseados em dados reais de um sistema produtivo.

Desenvolvimento de Sistema de Aquisição e Análise de Dados para Aplicações de Traçadores Radioativos em Unidades Industriais

Desenvolveu-se no Instituto de Engenharia Nuclear um sistema de aquisição de dados para avaliação das condições operacionais de unidades industriais pelo estudo das curvas Distribuição do Tempo de Residência - RTD, composto de detectores cintiladores NaI (Tl) 3”x 3” conectados a analisadores monocanal cujos sinais são captados por uma interface acoplada a um microcomputador. Para a análise das informações coletadas desenvolveu-se o programa TRACER que efetua um tratamento matemático preliminar dos dados; apresenta na tela a curva RTD, e calcula valores como o tempo de residência médio e as funções resposta, tanto para estímulos instantâneos como para estímulos contínuos. As informações levantadas permitem a identificação de problemas como possíveis canalizações, fugas, zonas mortas e decréscimo na eficiência das unidades. Todo o conjunto é disposto em módulos compactos o que possibilita seu transporte e instalação em unidades industriais.

Análise comparativa "in vitro" da extrusão apical de detritos originados por diferentes técnicas de instrumentação do sistema de canais radiculares

Introdução: A extrusão apical detritos (EAD) consequência indesejável da instrumentação canalar pode ser associada a dor/edema, podendo atrasar a cicatrização periapical. O nosso trabalho teve como objectivo avaliar e quantificar a EAD em canais instrumentados por sistemas de instrumentação rotatória contínua e reciprocante. Materiais e Métodos: 80 dentes monocanalares sem tratamento endodôntico prévio foram aleatoriamente divididos em 4 grupos (n=20): One Shape® Protaper® NEXT, Hyflex® EDM e WaveOne® Gold. Um tubo de Eppendorf (TdE) foi pesado antecipadamente numa balança analítica de precisão e com um dente inserido foi montado num dispositivo modificado, similar ao método descrito por Myers & Montgomery. Os canais foram instrumentados e irrigados com água destilada. Os dentes instrumentados foram removidos dos TdE e estes preenchidos com água destilada até perfazer 1,5ml, incubados a 70ºC durante cinco dias sendo pesados novamente, calculando a diferença entre o peso inicial e final determinando o peso dos detritos. Os dados foram analisados estatisticamente utilizando o IBM SPSS Statistics 22, considerando α=0,05. Efetuaram-se testes Kruskal-Wallis e post-hoc com ajustamento do ρ-value pelo método Dunn-Bonferroni. Resultados: Houve EAD em todas as técnicas de instrumentação. A análise estatística mostrou haver diferenças significativas na EAD entre as técnicas utilizadas (α=0,002). Entre as técnicas WaveOne® Gold e One Shape® (α=0,003), WaveOne® Gold e Protaper® NEXT (α=0,023) e WaveOne® Gold e Hyflex® EDM (α=0,028). Conclusões: A técnica One Shape® apresentou menor EAD e a técnica WaveOne® Gold com movimento reciprocante constitui maior fator de risco tendo apresentado maior EAD. Os resultados deste estudo indicam que os profissionais devem estar cientes para a EAD que pode ocorrer com cada instrumento, o que poderá servir de base para a selecção de um instrumento particular. Implicações clínicas: A escolha do sistema de instrumentação canalar influencia a extrusão de detritos. Fontes de financiamento: Agradecimentos as empresas; Micro-Mega, França, COLTÉNE e Dentsply Maillefer, Suíça.

Estudo empírico de antecedentes do sucesso de sistemas de informação: análise de um sistema de apoio à decisão em uma universidade pública

Universities are institutions that generate and manipulate large amounts of data as a result of the multiple functions they perform, of the amount of involved professionals and students they attend. Information gathered from these data is used, for example, for operational activities and to support decision-making by managers. To assist managers in accomplishing their tasks, the Information Systems (IS) are presented as tools that offer features aiming to improve the performance of its users, assist with routine tasks and provide support to decision-making. The purpose of this research is to evaluate the influence of the users features and of the task in the success of IS. The study is of a descriptive-exploratory nature, therefore, the constructs used to define the conceptual model of the research are known and previously validated. However, individual features of users and of the task are IS success antecedents. In order to test the influence of these antecedents, it was developed a decision support IS that uses the Multicriteria Decision Aid Constructivist (MCDA-C) methodology with the participation and involvement of users. The sample consisted of managers and former managers of UTFPR Campus Pato Branco who work or have worked in teaching activities, research, extension and management. For data collection an experiment was conducted in the computer lab of the Campus Pato Branco in order to verify the hypotheses of the research. The experiment consisted of performing a distribution task of teaching positions between the academic departments using the IS developed. The task involved decision-making related to management activities. The data that fed the system used were real, from the Campus itself. A questionnaire was answered by the participants of the experiment in order to obtain data to verify the research hypotheses. The results obtained from the data analysis partially confirmed the influence of the individual features in IS success and fully confirmed the influence of task features. The data collected failed to support significant ratio between the individual features and the individual impact. For many of the participants the first contact with the IS was during the experiment, which indicates the lack of experience with the system. Regarding the success of IS, the data revealed that there is no significance in the relationship between Information Quality (IQ) and Individual Impact (II). It is noteworthy that the IS used in the experiment is to support decision-making and the information provided by this system are strictly quantitative, which may have caused some conflict in the analysis of the criteria involved in the decision-making process. This is because the criteria of teaching, research, extension and management are interconnected such that one reflects on another. Thus, the opinion of the managers does not depend exclusively on quantitative data, but also of knowledge and value judgment that each manager has about the problem to be solved.

Análise comparativa de um sistema de refrigeração solar

Nesta dissertação são comparadas duas tecnologias de refrigeração. Uma tecnolo-gia é um sistema que usa a energia elétrica para fazer funcionar um ciclo de com-pressão de vapor, sistema comum em instalações de refrigeração. A outra solução é um sistema de absorção, em que a energia necessária para o funcionamento do sistema é energia térmica obtida através de coletores solares térmicos. Estas tecnologias são estudadas e comparadas para a refrigeração de um arma-zém de produtos agrícolas à temperatura constante de 5ºC para a região de Alque-va, região onde estão a ser desenvolvidos projetos hortofrutícolas a que estão as-sociadas necessidades de preservação dos produtos que envolvem refrigeração e em que a acessibilidade à rede elétrica é reduzida. É mostrado que a tecnologia do sistema de absorção com os coletores se apresenta a médio prazo mais vantajosa em termos económicos e ambientais; Abstract: Comparative analysis of a solar refrigeration system In this dissertation two refrigeration technologies are compared when used for the same objective. One is a technology using the electric energy to operate a vapour compression cycle, commonly used in refrigerated installations. The alternative technology is an absorption system driven by thermal energy, provided by solar thermal collectors. Both technologies are studied and compared for the refrigeration of an agricultural products warehouse at a constant temperature of 5ºC in the Alqueva region, where horticultural projects are being developed with associated needs of preservation of the products involving refrigeration, and where accessibility to the electrical grid is reduced. In the referred conditions it was shown that the absorption technology with collec-tors in the medium term surpasses the usual compression system, both from eco-nomic and environmental viewpoints.

Da bancada ao Bureau: análise do desenvolvimento da biotecnologia no Nordeste Brasileiro sob o enfoque de Sistema Regional de Inovação

The starting point of the present work consisted of investigating the development of biotechnology in the Northeast region of Brazil from the perspective of a Regional Innovation System (RIS). The theoretical framework adopted relied on the approaches and concepts presented by the Neo-Schumpeterian perspective. This framework was chosen because, by means of the Innovation System concept, this literature allows us to analyze the relationships and configurations of actors, as well as the role of the state and of social, science and technology, and economic policies in the studied region. The analysis considered four selected dimensions: physical infrastructure, human capital, scientific production, and funding. These variables were chosen because they allow us to verify the possibilities and limitations of developing a biotechnology RIS in the Northeast of Brazil, and these elements would help in answering the question behind this dissertation. The location of the physical infrastructure was determined by means of bibliographic and documental research and interviews with heads of institutions that do biotechnology research. Regarding human capital, the analysis focused on resource training in biotechnology, highlighting graduate courses and research groups in the area. To measure knowledge production, we delimited scientific collaboration among researchers in the field of biotechnology as the focus of this category. For the funding dimension, information was gathered from reports available at the websites of national and state funding agencies. The data was analyzed through method triangulation, involving quantitative and qualitative research stages. To back the analyses, we revisited the integration policies in the area of Science, Technology and Innovation. Our analysis has shown that these policies play a crucial role in the development of biotechnology in the region being studied. The data revealed that the physical infrastructure is concentrated in only three states (Bahia, Ceará, and Pernambuco). In this regard, the Northeast Biotechnology Network (Renorbio) stands out as a strategic actor, enabling states with poor infrastructure to develop research through partnerships with institutions located in another state. We have also verified that the practices involving human resource training and knowledge production are factors that enable the emergence of a regional system for biotechnology in the studied region. As limitations, we have verified the low immersion level of regional actors, the heterogeneity of socioeconomic indicators, the lack of financial resources, and a low innovation culture in the business sector. Overall, we have concluded that the development of a Regional Innovation System in Biotechnology, based on the current regional dynamics, depends on an effective change in the behavior of the social agents involved, both in the national and regional dimensions as well as in the public and private spheres

Aplicação de Sistema de Informações Geográficas na análise espacial de doenças do milho no Brasil.

This study presents an application of the geographical information system technology on plant disease involving a multidisciplinary teamwork of geoprocessing and physiopathology specialists. The spatial analysis tools in a GIS were used to evaluate the spatial distribution of two diseases of maize in Brazil: polysora rusl caused by Puccinia polysora and tropical rust caused by Physopella zeae. A database of cIimate variables (mean temperature. relative humidity. and leaf wetness duration) of cIimatological normal from 1961-1990 was obtained and then related it to a mathematical model of disease development (polysora rust) and to the cIimate intervals (tropical rust) in order to obtain the maps. The choice of the model or the favorable climate interval is the important chalIenge of the method because the difficulty of adequacy to the spatial and temporal scales for the specific application. The major incidence of both disease occurred in almost alI the North region from January to June. although this region has traditionalIy a low production of maize. Considering the biggest producers regions. for both the diseases, favorable areas are located in part of Mato Grosso, Tocanlins. Minas Gerais; Mato Grosso do Sul. and coastal areas of São Paulo, Paraná, and Santa Catarina. varying among the dilferent months from January to June. The method allowed making an adequate distinction of the states and the months considered.