Micro/nanostructured carbon composite modified with a hybrid redox mediator and enzymes as a glucose biosensor

A carbon micro/nanostructured composite based on cup-stacked carbon nanotubes (CSCNTs) grown onto a carbon felt has been found to be an efficient matrix for enzyme immobilization and chemical signal transduction. The obtained CSCNT/felt was modified with a copper hexacyanoferrate/polypyrrole (CuHCNFe/Ppy) hybrid mediator, and the resulting composite electrode was applied to H(2)O(2) detection, achieving a sensitivity of 194 +/- 15 mu A mmol(-1) L. The results showed that the CSCNT/felt matrix significantly increased the sensitivity of CuHCNFe/Ppy-based sensors compared to those prepared on a felt unrecovered by CSCNTs. Our data revealed that the improved sensitivity of the as-prepared CuHCNFe/Ppy-CSCNT/felt composite electrode can be attributed to the electronic interactions taking place among the CuHCNFe nanocrystals, Ppy layer and CSCNTs. In addition, the presence of CSCNTs also seemed to favor the dispersion of CuHCNFe nanocrystals over the Ppy matrix, even though the CSCNTs were buried under the conducting polymer layer. The CSCNT/felt matrix also enabled the preparation of a glucose biosensor whose sensitivity could be tuned as a function of the number of glucose oxidase (GOx) layers deposited through a Layer-by-Layer technique with an sensitivity of 11 +/- 2 mu A mmol(-1) L achieved at 15 poly(diallyldimethylammoniumchloride)/GOx bilayers. (C) 2011 Elsevier Ltd. All rights reserved.

Investigation of interfacial processes at tetraruthenated zinc porphyrin films using electrochemical surface plasmon resonance and electrochemical quartz crystal microbalance

In the present work we describe the investigation of interfacial and superficial processes on tetraruthenated zinc porphyrin (ZnTRP) films immobilized on gold electrode surface. In situ and real time measurements employing electrochemical surface plasmon resonance (ESPR)and electrochemical quartz crystal microbalance (EQCM) have given new insights into the electrochemical oxidation of ferrocyanide and phenolic compounds (acetaminophen, dopamine, and catechol) on ZnTRP modified electrodes. The decrease of diode like behavior in the presence of such phenolic species in contrast with ferrocyanide was clearly assigned to the inclusion of those species in the porphyrin film, creating new conduction pathways connecting the gold electrode surface with the film/solution interface. In fact, there are evidences that they can intercalate in the film (catechol > dopamine > acetaminophen), whereas ferrocyanide is completely excluded. Accordingly, the molecular size may play a fundamental role in such a process. (C) 2009 Published by Elsevier Ltd.

Polymeric electro-mechanic devices applied to antibiotic-controlled release

Polymeric electroactive blends formed by electropolymerized aniline inside a non-conductive polyacrylamide porous matrix were already shown as suitable materials for the electrocontrolled release of model compounds like safranin. In this paper the intermolecular interactions between the two components of the blend are put in evidence by Raman spectroscopy measurements. Also, in situ optical microscopy was used to follow changes occurring in the polyaniline/polyacrylamide blend during pyrocathecol violet release tests. These two sets of experiments show the possibility of controlling electrochemically the release of both, safranin (a cation) and pyrocathecol violet (an anion) and allow to infer a release mechanism based on the electromechanical properties of the blends explaining the dependence of the release kinetics on the applied potential. Tetracycline release curves for different potentials and pHs are shown and the obtained profiles are in agreement with those expected for a device acting as an electrochemically driven pump due to the artificial muscle properties of the conducting phase of the blends. (c) 2007 Elsevier B.V. All rights reserved.

Spectroscopic Characterization of Oligoaniline Microspheres Obtained by an Aniline-Persulfate Approach

This paper investigates the structure of the pro; ducts obtained from the polymerization of aniline with ammonium persulfate in a citrate/phosphate buffer solution at pH 3 by resonance Raman, NMR, FTIR, and UV-vis-NIR spectroscopies. All the spectroscopic data showed that the major product presented segments that were formed by a 1,4-Michael reaction between aniline and p-benzoquinone monoimine, ruling out the formation of polyazane structure that has been recently proposed. The characterization of samples obtained at different stages of the reaction indicated that, as the reaction progressed, phenazine units were formed and 1,4-Michael-type adducts were hydrolyzed/oxidized to yield benzoquinone. Raman mapping data suggested that phenazine-like segments could be related to the formation of the microspheres morphology.

Synthesis and spectroscopic characterization of polymer and oligomers of ortho-phenylenediamine

Poly(ortho-phenylenediamine) and oligomers of ortho-phenylenediamine were chemically synthesized and characterized by UV-vis, (1)H and (13)C NMR, FTIR and resonance Raman spectroscopies. Polymerization of ortho-phenylenediamine in HCl medium with ammonium persulfate only leads the trimer compound, in disagreement with some previous reports. Nevertheless, in acetic acid medium it was possible to prepare a polymer constituted by ladder phenazinic segments with different protonation levels and quinonediimine rings (polyaniline-like). X-ray absorption at N K-edge (N K XANES), X-ray photoelectron (XPS) and Electron paramagnetic resonance (EPR) spectroscopies were used to determine the different kinds of nitrogen presents in this class of polymer. N K XANES spectrum of poly(ortho-phenylenediamine) shows the band of -N=nitrogen of non-protonated phenazinic rings at 398.2 eV. In addition, XPS and N K XANES data confirm the presence of different types of protonated nitrogens in the polymeric poly(ortho-phenylenediamine) chain and the EPR spectrum shows that the polymer has a very weak polaronic signal. (C) 2009 Elsevier Ltd. All rights reserved.

Structure of chemically prepared poly-(para-phenylenediamine) investigated by spectroscopic techniques

The structure of chemically prepared poly-p-phenylenediamine (PpPD) was investigated by Resonance Raman (RR), FTIR, UV-VIS-NIR, X-ray photoelectron (XPS), X-ray Absorption at Nitrogen K edge (N K XANES), and Electron paramagnetic Resonance (EPR) spectroscopies. XPS, EPR and N K XANES data reveal that polymeric structure is formed mainly by radical cations and dication nitrogens. It excludes the possibility that PpPD chains have azo or phenazinic nitrogens, as commonly is supposed in the literature. The RR spectrum of PpPD shows two characteristic bands at 1527 cm(-1) and 1590 cm(-1) that were assigned to nu C=N and nu C=C of dication units, respectively, similar to polyaniline in pernigraniline base form. The presence of radical cations was confirmed by Raman data owing to the presence of bands at 1325/1370 cm(-1), characteristic of nu C-N of polaronic segments. Thus, all results indicate that PpPD has a doped PANT-like structure, with semi-quinoid and quinoid rings, and has no phenazinic rings, as observed for poly-o-phenylenediamine. (C) 2009 Elsevier Ltd. All rights reserved.

Síntese química e caracterização do poli 1,5-diaminonaftaleno

O presente trabalho apresenta o estudo da síntese química do poli 1,5-diaminonaftaleno (PDAN-1,5) em meio aquoso e em meio orgânico. O polímero foi caracterizado com o auxílio da espectroscopia de infravermelho (FTIR) e Raman, da voltametria cíclica, da microscopia eletrônica de varredura, da termogravimetria e de medidas de condutividade. O polímero apresentou estrutura semelhante ao mesmo polímero sintetizado eletroquimicamente por outros autores que é semelhante a estrutura da PAni. O PDAN-1,5 depositado na forma de filmes sobre eletrodos de Pt mostra-se eletroativo e estável quando ciclado em um meio aquoso/ácido. Os filmes obtidos em substrato metálico a partir da evaporação do solvente apresentam pouca aderência e trincas por toda a superfície. As propriedades apresentadas pelo PDAN-1,5 obtido neste trabalho vislumbram a sua utilização na confecção de dispositivos eletrocrômicos e de chaveamento.

Adição de plastificante à polianilina sintetizada quimicamente e avaliação dos filmes plastificados como proteção contra a corrosão do aço AISI 1010

Filmes de polianilina (PAni) puros não apresentam propriedades mecânicas satisfatórias quando depositados sobre metais e mergulhados em soluções aquosas. Propriedades mecânicas melhoradas podem ser obtidas adicionando um plastificante ao polímero. Neste caso foi utilizado o dodecilfenol (DDPh) e as condições mais adequadas de adição do DDPh a PAni previamente solubilizada em N-metilpirrolidinona (NMP) foram determinadas a partir da avaliação das propriedades dos filmes depositados sobre eletrodos metálicos de aço carbono. As melhores condições foram: adição de 5% de DDPh á PAni seguido de aquecimento sob vácuo a 200o C durante uma hora. A PAni sintetizada quimicamente foi utilizada nas condições dedopada e dopada com 5% de ácido para-toluenosulfônico (TSA). Também foi preparada uma mistura de PAni com poli(orto-metóxianilina) (POMA) em diversas proporções e igualmente dedopadas e dopadas com 5% de TSA. Os filmes obtidos nestas condições foram analisados por técnicas variadas (espectroscopia infravermelho, Raman e de massa), testados por técnicas eletroquímicas (voltametria cíclica e medida do potencial de corrosão ao longo do tempo) e ensaios acelerados de corrosão (névoa salina e câmara úmida) O melhor desempenho como filme protetor contra a corrosão foi apresentado pela PAni plastificada com 5% de DDPh e dopada com 5% de TSA. No ensaio de potencial de corrosão contra o tempo, este filme foi capaz de manter o potencial do sistema PAni-DDPh-TSA / aço carbono durante sete dias num valor positivo. Filmes da mistura PAni-POMA plastificados e dopados com TSA também atuaram conforme um mecanismo do mesmo tipo, porém por um período de tempo inferior, demonstrando a influência da POMA nas propriedades da PAni. Os ensaios acelerados de corrosão mostraram que os filmes de PAni plastificados com 5% de DDPh e dopados com 5% de TSA são muito superiores na proteção contra a corrosão do aço quando comparados ao filme de PAni pura. No ensaio de névoa salina o aço revestido pelo filme de PAni plastificado com 5% de DDPh e dopado com 5% de TSA, não apresentou corrosão por um período de sete dias.

Síntese química e caracterização do poli (5-amino 1-naftol) em presença de ácidos dopantes e sua aplicação na construção de dispositivos eletrônicos

Neste trabalho foi estudada a síntese química do poli (5-amino 1-naftol) (PAN) em presença de diferentes agentes dopantes e meios reacionais. Os polímeros obtidos foram caracterizados pelas técnicas espectroscópicas de infravermelho, Raman, por microscopia eletrônica de varredura, por voltametria cíclica, temogravimetria, medidas de condutividade elétrica e grau de aderência. A estrutura do PAN obtido apresentou-se semelhante aos resultados obtidos para a PAni. Filmes de PAN sintetizados em meio aquoso ácido sobre substratos de platina apresentaram eletroatividade e estabilidade à ciclagem quando. Filmes preparados a partir de PAN sintetizado em presença dos ácidos dopantes dinonil naftalêno disulfônico (DNNDSA), dinonil naftalêno sulfônico (DNNSA) e dodecil benzeno sulfônico (DBSA), apresentaram-se mais homogêneos e mais aderentes que os sintetizados em ausência desses. A aplicação na construção de dispositivos eletrocrômicos e de chaveamento apresentou-se inicialmente viável para todas as amostras testadas.

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (epsilon') and imaginary (epsilon) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o-methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA-TSA were determined in the frequency interval between 10(2) and 3 X 10(6) Hz and in the temperature range from -120 up to 120degreesC. It was observed that the values of epsilon' and epsilon had a greater increase with the POMA-TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA-TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell-Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA-TSA in the blends. A strong decrease was observed in POMA-TSA conductivity in the blend, which was bigger the lower the POMA-TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. (C) 2002 Wiley Periodicals, Inc.

The role of pressure in the electrical transport of doped plasticized polyanilines

The behaviour of dc longitudinal and transverse conductivity in self-assembled plastdoped films of polyaniline has been studied over the range of 9 K to 320 K, under different applied mechanical pressures. We observe a progressive evolution of the conductivity picture as the applied pressure is increased, especially in the transverse direction, where the conductivity tends to lower as the pressure is increased. (C) 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Associação de cetamina S(+) e midazolam pelo método convencional de cálculo e pela extrapolação alométrica em bugios-ruivo (Alouatta guariba clamitans): resposta clínica e cardiorrespiratória

O objetivo deste estudo foi avaliar o protocolo de contenção química com cetamina S(+) e midazolam em bugios-ruivos, comparando o cálculo de doses pelo método convencional e o método de extrapolação alométrica. Foram utilizados 12 macacos bugios (Alouatta guariba clamitans) hígidos, com peso médio de 4,84±0,97kg, de ambos os sexos. Após jejum alimentar de 12 horas e hídrico de seis horas, realizou-se contenção física manual e aferiram-se os seguintes parâmetros: frequência cardíaca (FC), frequência respiratória (f), tempo de preenchimento capilar (TPC), temperatura retal (TR), pressão arterial sistólica não invasiva (PANI) e valores de hemogasometria arterial. Posteriormente, os animais foram alocados em dois grupos: GC (Grupo Convencional, n=06), os quais receberam cetamina S(+) (5mg kg-1) e midazolam (0,5mg kg-1), pela via intramuscular, com doses calculadas pelo método convencional; e GA (Grupo Alometria, n=06), os quais receberam o mesmo protocolo, pela mesma via, utilizando-se as doses calculadas pelo método de extrapolação alométrica. Os parâmetros descritos foram mensurados novamente nos seguintes momentos: M5, M10, M20 e M30 (cinco, 10, 20 e 30 minutos após a administração dos fármacos, respectivamente). Também foram avaliados: qualidade de miorrelaxamento, reflexo podal e caudal, pinçamento interdigital, tempo para indução de decúbito, tempo hábil de sedação, qualidade de sedação, e tempo e qualidade de recuperação. O GA apresentou menor tempo para indução ao decúbito, maior grau e tempo de sedação, bem como redução significativa da FC e PANI de M5 até M30, quando comparado ao GC. Conclui-se que o grupo no qual o cálculo de dose foi realizado por meio da alometria (GA) apresentou melhor grau de relaxamento muscular e sedação, sem produzir depressão cardiorrespiratória significativa.

Transient current effects on poly(o-methoxyaniline) films irradiated by pulsed electron beam

Fast transient current decay was recorded on POMA samples during current pulses (in the order of milliseconds) provided by a low energy electron beam under an applied field. The characteristic time decay depends on the electron beam energy and on the bias polarity. The results were explained taking into account the effect of space charge, the intrinsic conductivity of the non-irradiated region of the sample and the radiation-induced conductivity of the thin irradiated region. Fitting parameters may provide the value of both intrinsic and radiation-induced conductivities and the average electron range.

Diffusion-controlled growth of aggregates in layer-by-layer films of poly(o-methoxyaniline)

The adsorption process in layer-by-layer (LBL) films of poly(o-methoxyaniline) alternated with poly(vinyl sulfonic acid) is explained using the Avrami equation. This equation was used due to its mathematical simplicity and adequate description of experimental data in real polymer systems. The Avrami parameters are a convenient means to represent empirical data of crystallization, and if microscopic knowledge is available these parameters can also be associated with adsorption mechanisms. The growth of spherulites in the LBL films was studied as a function of time using atomic force microscopy and the data were used to estimate the number and radii of aggregates, from which the Avrami parameters were determined. We find that the adsorption mechanism may correspond to a tri dimensional, diffusion-controlled growth, with increasing nucleation rate, consistent with results from kinetics of adsorption.

Magnetic field dependent magnetization of a conducting plasticized poly(aniline) film

We report magnetic data of free standing films of poly( aniline) (PANI) protonated with a plasticizing di-ester of succinic acid. The data have been obtained using the electron spin resonance (ESR) technique at two different frequencies, X-band (9.4 GHz) and Q-band ( 34 GHz), on one hand, and by magnetization measurements in broad ranges of temperatures and magnetic fields on the other hand. All the data can be explained assuming a transition as a function of temperature from delocalized magnetic moments in the valence band to localized positive polarons in several antiferromagnetically correlated bands. By increasing the magnetic field, the magnetic properties are affected in several ways. An intra-band admixture of states occurs; it contributes to increase the spins' localization and finally promotes an antiferromagnetic-metamagnetic transition.