Mapeamento cromossômico de DNAs repetitivos com fins biotecnológicos em peixes marinhos e interesse comercial - Rachycentridae e Lutjanidae

The Rachycentron canadum species, commonly known as beijupirá or cobia is the only representative of Rachycentridae family which has been increasingly used in marine fish farming, in intensive cultivation. As advantageous features it has easy adaptation, prolific behavior, early growth in captivity and high commercial value. Additionally, specie of Lutjanidae family (Lutjanus synagris, Lutjanus jocu, Lutjanus analis, Lutjanus alexandrei and Ocyurus chrysurus) represents an important fisheries resource in all areas of its occurrence. In Brazil, the commercial exploitation of Lutjanidae which begun in the 60's and 80's, already has showed a decline in catch volumes. This fact suggests that the snappers must have a conservative management. Despite the economic potential, little is known about the genetic and cytogenetic characteristics of these species, especially with respect to repetitive DNA analysis, which represents the major part of the eukaryotes genome, playing important evolutionary roles in the fish genome. Cytogenetic data is increasingly being used in population studies and biotechnological purposes in fishes. The cytogenetical analyzes were performed using classical methods such as Giemsa staining, C-banding and Ag-NORs, fluorochromes base-specific staining (DAPI and MM) and physical mapping of repetitive sequences among which, telomeric sequences, transposons (Tol2), retrotransposons (Rex1 and Rex3), repetitive DNA (microsatellites and Cot-1) and transcriptionally active regions of the 18S and 5S ribosomal genes and histone (H3 and H2BA) by in situ hybridization with fluorescent probes (FISH). The chromosomal patterns obtained contributed to the organization of repetitive sequences in the genome of the species, as well as karyotypical differentiation. Unusual patterns of histone sequences expansion depict the first occurrence in marine fishes. The obtained data provided subsides to the genetic knowledge of the important fisheries resource represented by the species here analyzed, seeking the marine pisciculture improvement.

Validação de espécies de Centropomus (Centropomidae, Perciformes) do litoral do Rio Grande do Norte através de caracterização citogenética e molecular

The Centropomidae family consists of three genera, Centropomus, Lates and Psammoperca. Centropomus is the most diverse group, with six Centropomus species occur in the Western Atlantic Ocean C. poeyi Chávez, 1961, C. parallelus Poey, 1860, C. mexicanus Bocourt, 1868, C. pectinatus Poey, 1860 and C. ensiferus Poey, 1860. Some of these species are considered cryptic, because of its morphological traits showed low resolution for identification purposes. Despite showing great interest as a natural resource and fish culture, aspects of their diversity and karyotypic patterns are poorly understood. In this work morphological identification and comparison of mitochondrial 16S gene sequence were used to identify the species of the genus Centropomus occurring in Rio Grande do Norte, northeastern Brazil. Two sepecies were identified, C. undecimalis and C. mexicanus, which had the chromosomal aspects analyzed, through Classical cytogenetic method analyzes (conventional staining, C-banding, Ag-NORs), fluorochrome staining AT- and GC-specific, replication bands by incorporating of the base analog 5-Bromo-2’-deoxyuridine (5-BrdU), in situ chromosomal mapping of (TTAGGG)n sequences and in situ chromosome mapping 18S and 5S rRNA genes. Both species show 2n=48 acrocentric chromosomes, with ribosomal sites (Ag-NOR/18S rDNA/ Mitramycin+) in second chromosomal pair, in telomeric position on the long arm in C. mexicanus and interstitial in C. undecimalis. The nuclear organization pair (pair 2) shown a resolutive cytotaxonomic marker for these two species. The generated data reveal a lower species diversity than previously believed, suggesting that greater attention should be paid in taxonomic identification of the species, in view of optimize commercial actions exploitation, biological conservation and cultivation.

Efeitos induzidos por treino complementar de força em basquetebolistas adolescentes

O estudo teve por objetivo analisar os efeitos induzidos por sessões adicionais de treino de força em adolescentes praticantes de basquetebol. Mais especificamente, pretendeu-se comparar dois programas de treino (um baseado na teoria do treino integrado e outro no treino integrado com um trabalho complementar de treino de força recorrendo ao peso do próprio corpo) ao nível da aptidão física em praticantes de basquetebol sub-14. A amostra foi constituída por 12 jogadores que se voluntariaram para participar no estudo. Após uma avaliação inicial, a amostra foi dividida em 2 grupos homogéneos. Um dos grupos, grupo experimental (GE) realizou 8 semanas de treino integrado, mais um trabalho complementar de treino de força valendo-se do peso do próprio corpo, ao mesmo tempo que o grupo de controlo (GC) apenas realizou o treino integrado. Após 8 semanas houve lugar a nova avaliação (avaliação final). As avaliações foram realizadas sempre no mesmo local, com os mesmos membros da equipa de investigação a proceder às recolhas, e no mesmo período do dia. Após um aquecimento mio-articular de 10 min as avaliações consistiram nos seguintes testes: (i) lançamento da bola medicinal 2kg; (ii) salto vertical com contramovimento sem mobilização dos membros superiores; (iii) com mobilização dos membros superiores; (iv) sprint de 22 m; (v) agilidade sem bola; (vi) e com bola. Os resultados finais indicaram que o GE melhorou significativamente a força nos membros superiores medida através do lançamento da bola medicinal. Tendo-se verificado que a utilização dos 6 exercícios selecionados, através do incremento de volume de duas em duas semanas, promoveu em apenas oito semanas de trabalho, melhorias significativas de desempenho que rondaram os 10% relativamente ao teste inicial. Foi também possível verificar que, ao nível da agilidade com bola, as 8 semanas de aplicação do trabalho complementar não foram suficientes para promover incrementos significativos. No entanto, ao nível da agilidade sem bola, os jogadores do GE conseguiram ver esta capacidade melhorada, demonstrando uma maior facilidade na mudança de direção e deslocamento lateral e a retaguarda em comparação à avaliação inicial. Ao nível da força inferior, verificou-se que fazendo comparação entre os dois momentos de avaliação, ao nível do salto sem uso dos membros superiores, nenhum dos grupos obteve diferenças estatisticamente significativas na melhoria desta componente, nos dois momentos. Já quando foi permitido o uso dos membros superiores para balancear o corpo, foram observadas melhorias de rendimento no GE. Ao nível da velocidade, por se tratar de velocidade pura, i.e. todos os esforços foram abaixo dos 5s na totalidade dos jogadores, além disso foi possível verificar que, as oito semanas de aplicação do trabalho complementar, não foram suficientes para promover diferenças significativas em ambos os grupos nos dois momentos. Assim, as diferenças obtidas entre os grupos reforçam a importância que um trabalho de força complementar tem para praticantes de basquetebol adolescentes. Pelo que, os treinadores desta faixa etária deverão procurar incluir trabalho multifuncional na prescrição de treino, de forma a visar uma aptidão física adequada para a prática da modalidade.

Radiotherapy Treatment Assessment using DCE-MRI

Abstract

The goal of modern radiotherapy is to precisely deliver a prescribed radiation dose to delineated target volumes that contain a significant amount of tumor cells while sparing the surrounding healthy tissues/organs. Precise delineation of treatment and avoidance volumes is the key for the precision radiation therapy. In recent years, considerable clinical and research efforts have been devoted to integrate MRI into radiotherapy workflow motivated by the superior soft tissue contrast and functional imaging possibility. Dynamic contrast-enhanced MRI (DCE-MRI) is a noninvasive technique that measures properties of tissue microvasculature. Its sensitivity to radiation-induced vascular pharmacokinetic (PK) changes has been preliminary demonstrated. In spite of its great potential, two major challenges have limited DCE-MRI’s clinical application in radiotherapy assessment: the technical limitations of accurate DCE-MRI imaging implementation and the need of novel DCE-MRI data analysis methods for richer functional heterogeneity information.

This study aims at improving current DCE-MRI techniques and developing new DCE-MRI analysis methods for particular radiotherapy assessment. Thus, the study is naturally divided into two parts. The first part focuses on DCE-MRI temporal resolution as one of the key DCE-MRI technical factors, and some improvements regarding DCE-MRI temporal resolution are proposed; the second part explores the potential value of image heterogeneity analysis and multiple PK model combination for therapeutic response assessment, and several novel DCE-MRI data analysis methods are developed.

I. Improvement of DCE-MRI temporal resolution. First, the feasibility of improving DCE-MRI temporal resolution via image undersampling was studied. Specifically, a novel MR image iterative reconstruction algorithm was studied for DCE-MRI reconstruction. This algorithm was built on the recently developed compress sensing (CS) theory. By utilizing a limited k-space acquisition with shorter imaging time, images can be reconstructed in an iterative fashion under the regularization of a newly proposed total generalized variation (TGV) penalty term. In the retrospective study of brain radiosurgery patient DCE-MRI scans under IRB-approval, the clinically obtained image data was selected as reference data, and the simulated accelerated k-space acquisition was generated via undersampling the reference image full k-space with designed sampling grids. Two undersampling strategies were proposed: 1) a radial multi-ray grid with a special angular distribution was adopted to sample each slice of the full k-space; 2) a Cartesian random sampling grid series with spatiotemporal constraints from adjacent frames was adopted to sample the dynamic k-space series at a slice location. Two sets of PK parameters’ maps were generated from the undersampled data and from the fully-sampled data, respectively. Multiple quantitative measurements and statistical studies were performed to evaluate the accuracy of PK maps generated from the undersampled data in reference to the PK maps generated from the fully-sampled data. Results showed that at a simulated acceleration factor of four, PK maps could be faithfully calculated from the DCE images that were reconstructed using undersampled data, and no statistically significant differences were found between the regional PK mean values from undersampled and fully-sampled data sets. DCE-MRI acceleration using the investigated image reconstruction method has been suggested as feasible and promising.

Second, for high temporal resolution DCE-MRI, a new PK model fitting method was developed to solve PK parameters for better calculation accuracy and efficiency. This method is based on a derivative-based deformation of the commonly used Tofts PK model, which is presented as an integrative expression. This method also includes an advanced Kolmogorov-Zurbenko (KZ) filter to remove the potential noise effect in data and solve the PK parameter as a linear problem in matrix format. In the computer simulation study, PK parameters representing typical intracranial values were selected as references to simulated DCE-MRI data for different temporal resolution and different data noise level. Results showed that at both high temporal resolutions (<1s) and clinically feasible temporal resolution (~5s), this new method was able to calculate PK parameters more accurate than the current calculation methods at clinically relevant noise levels; at high temporal resolutions, the calculation efficiency of this new method was superior to current methods in an order of 102. In a retrospective of clinical brain DCE-MRI scans, the PK maps derived from the proposed method were comparable with the results from current methods. Based on these results, it can be concluded that this new method can be used for accurate and efficient PK model fitting for high temporal resolution DCE-MRI.

II. Development of DCE-MRI analysis methods for therapeutic response assessment. This part aims at methodology developments in two approaches. The first one is to develop model-free analysis method for DCE-MRI functional heterogeneity evaluation. This approach is inspired by the rationale that radiotherapy-induced functional change could be heterogeneous across the treatment area. The first effort was spent on a translational investigation of classic fractal dimension theory for DCE-MRI therapeutic response assessment. In a small-animal anti-angiogenesis drug therapy experiment, the randomly assigned treatment/control groups received multiple fraction treatments with one pre-treatment and multiple post-treatment high spatiotemporal DCE-MRI scans. In the post-treatment scan two weeks after the start, the investigated Rényi dimensions of the classic PK rate constant map demonstrated significant differences between the treatment and the control groups; when Rényi dimensions were adopted for treatment/control group classification, the achieved accuracy was higher than the accuracy from using conventional PK parameter statistics. Following this pilot work, two novel texture analysis methods were proposed. First, a new technique called Gray Level Local Power Matrix (GLLPM) was developed. It intends to solve the lack of temporal information and poor calculation efficiency of the commonly used Gray Level Co-Occurrence Matrix (GLCOM) techniques. In the same small animal experiment, the dynamic curves of Haralick texture features derived from the GLLPM had an overall better performance than the corresponding curves derived from current GLCOM techniques in treatment/control separation and classification. The second developed method is dynamic Fractal Signature Dissimilarity (FSD) analysis. Inspired by the classic fractal dimension theory, this method measures the dynamics of tumor heterogeneity during the contrast agent uptake in a quantitative fashion on DCE images. In the small animal experiment mentioned before, the selected parameters from dynamic FSD analysis showed significant differences between treatment/control groups as early as after 1 treatment fraction; in contrast, metrics from conventional PK analysis showed significant differences only after 3 treatment fractions. When using dynamic FSD parameters, the treatment/control group classification after 1st treatment fraction was improved than using conventional PK statistics. These results suggest the promising application of this novel method for capturing early therapeutic response.

The second approach of developing novel DCE-MRI methods is to combine PK information from multiple PK models. Currently, the classic Tofts model or its alternative version has been widely adopted for DCE-MRI analysis as a gold-standard approach for therapeutic response assessment. Previously, a shutter-speed (SS) model was proposed to incorporate transcytolemmal water exchange effect into contrast agent concentration quantification. In spite of richer biological assumption, its application in therapeutic response assessment is limited. It might be intriguing to combine the information from the SS model and from the classic Tofts model to explore potential new biological information for treatment assessment. The feasibility of this idea was investigated in the same small animal experiment. The SS model was compared against the Tofts model for therapeutic response assessment using PK parameter regional mean value comparison. Based on the modeled transcytolemmal water exchange rate, a biological subvolume was proposed and was automatically identified using histogram analysis. Within the biological subvolume, the PK rate constant derived from the SS model were proved to be superior to the one from Tofts model in treatment/control separation and classification. Furthermore, novel biomarkers were designed to integrate PK rate constants from these two models. When being evaluated in the biological subvolume, this biomarker was able to reflect significant treatment/control difference in both post-treatment evaluation. These results confirm the potential value of SS model as well as its combination with Tofts model for therapeutic response assessment.

In summary, this study addressed two problems of DCE-MRI application in radiotherapy assessment. In the first part, a method of accelerating DCE-MRI acquisition for better temporal resolution was investigated, and a novel PK model fitting algorithm was proposed for high temporal resolution DCE-MRI. In the second part, two model-free texture analysis methods and a multiple-model analysis method were developed for DCE-MRI therapeutic response assessment. The presented works could benefit the future DCE-MRI routine clinical application in radiotherapy assessment.

Hydrocarbons in water, suspended matter, and bottom sediments of the White Sea

Data are presented on concentration and composition of aliphatic and polycyclic aromatic hydrocarbons (HC) in water, suspended matter (collected with a Juday net and by a separator), and in bottom sediments of the White Sea. It was found that during the last years the level of aliphatic HC concentrations in waters of the White Sea (aver. 18 µg/l) practically did not change and was comparable with average concentrations in shelf areas of the World Ocean. In water and bottom sediments distribution of HC is determined by discharge of river marginal filters. Here sedimentation of the bulk of anthropogenic HC occurs. That is why a grain-size controlling factor is not active in the zone of the river depocenter (in particular, of the North Dvina River). The same reasons most probably may explain differences in degree of geochemical relationships between contents of TOC and HC in suspended matter and bottom sediments. After passing through marginal filters natural HC are dominant in all migration forms.

(Table 2) Major and trace elements in black smoker particulates

We present geochemical data of black smoker particulates filtered from hydrothermal fluids with seawater-dilutions ranging from 0-99%. Results indicate the dominance of sulphide minerals (Fe, Cu, and Zn sulphides) in all samples taken at different hydrothermal sites on the Mid-Atlantic Ridge. Pronounced differences in the geochemistry of the particles between Logatchev I and 5°S hydrothermal fields could be attributed to differences in fluid chemistry. Lower metal/sulphur ratios (Me/H2S < 1) compared to Logatchev I result in a larger amount of particles precipitated per liter fluid and the occurrence of elemental sulphur at 5°S, while at Logatchev I Fe oxides occur in larger amounts. Systematic trends with dilution degree of the fluid include the precipitation of large amounts of Cu sulphides at a low dilution and a pronounced drop with increasing dilution. Moreover, Fe (sulphides or oxides) precipitation increases with dilution of the vent fluid by seawater. Geochemical reaction path modeling of hydrothermal fluid-seawater mixing and conductive cooling indicates that Cu sulphide formation at Logatchev I and 5°S mainly occurs at high temperatures and low dilution of the hydrothermal fluid by seawater. Iron precipitation is enhanced at higher fluid dilution, and the different amounts of minerals forming at 5°S and Logatchev I are thermodynamically controlled. Larger total amounts of minerals and larger amounts of sulphide precipitate during the mixing path when compared to the cooling path. Differences between model and field observations do occur and are attributable to closed system modeling, to kinetic influences and possibly to organic constituents of the hydrothermal fluids not accounted for by the model.

Grain size distribution and bulk chemistry of eolian dust

Atmospheric dust samples collected along a transect off the West African coast have been investigated for their physical (grain-size distribution), mineralogical, and chemical (major elements) composition. On the basis of these data the samples were grouped into sets of samples that most likely originated from the same source area. In addition, shipboard-collected atmospheric meteorological data, modeled 4-day back trajectories for each sampling day and location, and Total Ozone Mapping Spectrometer aerosol index data for the time period of dust collection (February-March 1998) were combined and used to reconstruct the sources of the groups of dust samples. On the basis of these data we were able to determine the provenance of the various dust samples. It appears that the bulk of the wind-blown sediments that are deposited in the proximal equatorial Atlantic Ocean are transported in the lower level (>~900 hPa) NE trade wind layer, which is a very dominant feature north of the Intertropical Convergence Zone (ITCZ). However, south of the surface expression of the ITCZ, down to 5°S, where surface winds are southwesterly, we still collected sediments that originated from the north and east, carried there by the NE trade wind layer, as well as by easterly winds from higher altitudes. The fact that the size of the wind-blown dust depends not only on the wind strength of the transporting agent but also on the distance to the source hampers a direct comparison of the dust's size distributions and measured wind strengths. However, a comparison between eolian dust and terrigenous sediments collected in three submarine sediment traps off the west coast of NW Africa shows that knowledge of the composition of eolian dust is a prerequisite for the interpretation of paleorecords obtained from sediment cores in the equatorial Atlantic.

Raw data of SCADCP (self-contained Acoustic Doppler Current Profiler) from three moorings in the Eastern Weddell Sea in 2005

Ten-month time series of mean volume backscattering strength (MVBS) and vertical velocity obtained from three moored acoustic Doppler current profilers (ADCPs) deployed from February until December 2005 at 64°S, 66.5°S and 69°S along the Greenwich Meridian were used to analyse the diel vertical zooplankton migration (DVM) and its seasonality and regional variability in the Lazarev Sea. The estimated MVBS exhibited distinct patterns of DVM at all three mooring sites. Between February and October, the timing of the DVM and the residence time of zooplankton at depth were clearly governed by the day-night rhythm. Mean daily cycles of the ADCP-derived vertical velocity were calculated for successive months and showed maximum ascent and descent velocities of 16 and -15 mm/s. However, a change of the MVBS pattern occurred in late spring/early austral summer (October/November), when the zooplankton communities ceased their synchronous vertical migration at all three mooring sites. Elevated MVBS values were then concentrated in the uppermost layers (<50 m) at 66.5°S. This period coincided with the decay of sea ice coverage at 64°S and 66.5°S between early November and mid-December. Elevated chlorophyll concentrations, which were measured at the end of the deployment, extended from 67°S to 65°S and indicated a phytoplankton bloom in the upper 50 m. Thus, we propose that the increased food supply associated with an ice edge bloom caused the zooplankton communities to cease their DVM in favour of feeding.

Physical oceanography and processed 2 minutes-averaged continuous VM-ADCP profiles during POLARSTERN cruise ANT-XXVIII/3

The physical and biological carbon pumps in the different hydrographic and biogeochemical regimes of the Atlantic Sector of the Southern Ocean are controlled by a series of coupled physical, chemical and biological processes and a project named Eddy-Pump was designed to study them. The Eddy Pump field campaign was carried out during RV Polarstern Cruise ANT-XXVIII/3 between January and March 2012. Particular emphasis was laid on the differences which occur along the axis of the Antarctic Circumpolar Current (ACC) with its associated mesoscale eddy field. The study sites were selected in order to represent (1) the central ACC with its regular separation in different frontal jets, investigated by a meridional transect along 10°E; (2) a large-scale bloom west of the Mid-Atlantic Ridge which lasted several months with conspicuous chlorophyll-poor waters to its immediate east studied by a three-dimensional mesoscale survey centred at 12°40'W; and (3) the Georgia Basin north of the island of South Georgia, which regularly features an extended and dense phytoplankton bloom, was investigated by a mesoscale survey centred at 38°12'W. While Eddy-Pump represents an interdisciplinary project by design, we here focus on describing the variable physical environment within which the different biogeochemical regimes developed. For describing the physical environment we use measurements of temperature, salinity and density, of mixed-layer turbulence parameters, of dynamic heights and horizontal current vectors, and of flow trajectories obtained from surface drifters and submerged floats. This serves as background information for the analyses of biological and chemical processes and of biogeochemical fluxes addressed by other papers in this issue. The section along 10°E between 44°S and 53°S showed a classical ACC structure with well-known hydrographic fronts, the Subantarctic Front (SAF) at 46.5°S, the Antarctic Polar Front (APF) split in two, at 49.25°S and 50.5°S, and the Southern Polar Front (SPF) at 52.5°S. Each front was associated with strong eastward flows. The West Mid-Atlantic Ridge Survey showed a weak and poorly resolved meander structure between the APF and the SPF. During the first eight days of the survey the oceanographic conditions at the Central Station at 12°40'W remained reasonably constant. However after that, conditions became more variable in the thermocline with conspicuous temperature inversions and interleavings and also a decrease in temperature in the surface layer. At the very end of the period of observation the conditions in the thermocline returned to being similar to those observed during the early part of the period with however the mixed layer temperature raised. The period of enhanced thermohaline variability was accompanied by increased currents. The Georgia Basin Survey showed a very strong zonal jet at its northern edge which connects to a large cyclonic meander that itself joins an anticyclonic eddy in the southeastern quadrant. The water mass contrasts in this survey were stronger than in the West Mid-Atlantic Ridge Survey, but similar to those met along 10°E with the exception that the warm and saline surface water typical of the northern side of the SAF was not covered by the Georgia Basin Survey. Mixed layers found during Eddy-Pump were typically deep, but varied between the three survey areas; the mean depths and standard variations of the mixed layer along the 10°E were 77.2±24.7 m, at the West Mid-Atlantic Ridge 66.7±17.7 m, and in the Georgia Basin 36.8±10.7 m.

Annotated record of the detailed examination of Mn deposits from DSDP Site 26, Leg 4 (Core 4-26-1)

Site 26 was selected on the crest of the Mid-Atlantic Ridge between 15°N and 5°S is offset to the east nearly 4000 kilometers through a series of fracture zones. One of the most prominent of these is the Vema Fracture Zone, a narrow east-west trending trough which cuts through the Mid-Atlantic Ridge at latitude 11°N.

Princípios de Construção Enxuta em Empresa de Pequeno Porte em Guarulhos (SP)

O objetivo desta pesquisa é verificar de que maneira os princípios da Construção Enxuta estão sendo empregados em empresa de pequeno porte do segmento de Construção Civil. A pesquisa é de natureza qualitativa e exploratória, sendo o estudo de caso realizado em uma construtora de pequeno porte de edifícios verticais com o apoio do Sindicato das Empresas de Compra, Venda, Locação e Administração de Imóveis Residenciais e Comerciais de São Paulo - SECOVI. Observou-se grande interesse na implantação, sendo um ponto negativo a necessidade de mudança de cultura, visto que muitas atividades tidas como ”vícios” devem ser eliminadas, frente a novo conhecimento. Motivada pelos gestores e alta direção, a filosofia será bem vinda, assim como outras ferramentas de Produção Enxuta, tais como o kanban, housekeeping, 5S, Just in Time e melhorias nos canteiros de obra e processos logísticos. Concluiu-se nesta pesquisa que os princípios da Construção Enxuta são pouco conhecidos pelos profissionais, na prática sendo voltados para gestão da qualidade e produtividade. Constatou-se que, ao mencionar os princípios, estes são de pouco conhecimento, e tem-se uma aceitação imediata quando se fala em redução de tempo e aumento da produtividade com eliminação de tarefas consideradas como de não agregação de valor.

Tourette's syndrome and associated disorders: a systematic review

To compile data on Tourette's syndrome (TS), tics and associated disorders. METHODS: A systematic review of the literature was conducted using the 5S levels of organization of healthcare research evidence (systems, summaries, synopses, syntheses, studies), based on the model described by Haynes. The search keywords were Tourette, tics and comorbidity, which were cross-referenced. Studies provided by publishers and articles being processed on July 31, 2013, were also included. RESULTS: Of all studies retrieved during the search, 64 were selected because they analyzed the epidemiology, clinical features and etiopathogenesis of TS and its comorbidities. TS is classified as a hyperkinetic movement disorder, and at least 90% of the patients have neuropsychiatric comorbidities, of which attention deficit hyperactivity and obsessive-compulsive disorders are the most common. The syndrome is clinically heterogeneous and has been associated with a dysfunction of cortico-striatal-thalamic-cortical circuits involving various neurotransmitters. Although its genetic etiology has been widely studied, other factors may be important to understand this syndrome and its associated disorders. CONCLUSIONS: TS is a neurodevelopmental disorder that results from the impact of stress factors on a vulnerable biological substrate during the critical periods of neurodevelopment. The study of TS and its comorbidities may contribute, at different levels, to the understanding of several neuropsychiatric disorders of clinical and therapeutic relevance.

Criação de estabilidade numa linha de produção de argamassas em pó

Com as constantes mudanças de mercado, as empresas enfrentam cada vez mais obstáculos para se manterem competitivas e inovadoras, para isso procuram formas de sobreviver seguindo filosofias e utilizando ferramentas que permita atingir os seus objetivos. A filosofia Lean é uma filosofia seguida por muitas empresas que pretendam criar valor eliminando desperdícios. O objetivo deste projeto passa pela implementação de ferramentas Lean de modo a criar estabilidade no processo produtivo, eliminando desperdícios e criando valor. Com foco neste objetivo estudou-se as principais fontes de variabilidade no processo produtivo nos 4M’s (Máquina, Método, Mão-de-Obra e Máquina). Após essa análise foram implementadas ações de melhoria como os 5S, criação de sistemas visuais, redução do tempos de setup e tempos de espera, introdução de kanbans e padronização dos métodos de trabalho.Com a implementação destas medidas foi possível tornar o processo produtivo mais estável e flexível, com capacidade para responder às constantes alterações de mercado.

Melhoria de processos numa indústria transformadora de bacalhau

Este relatório contempla um período de estágio de 8 meses numa empresa transformadora de bacalhau, com o objetivo de melhorar a sua competitividade. A análise revelou um planeamento informal à base da experiência, com custos associados – stocks excessivos ou escassos, falta de planeamento médio/longo prazo, tempos de espera, entre outros, provocando desperdícios a minimizar ou mesmo corrigir e um conjunto de problemas no processo produtivo que foram devidamente identificados. As propostas de solução contemplaram uma análise estratégica com o modelo de Porter e uma análise SWOT. Relativamente aos desperdícios identificados, utilizou-se a filosofia Lean, concretamente os 5S, para sugerir e implementar um vasto conjunto de melhorias.

Aplicação de um value stream map nos serviços após venda automóvel

O projeto desenvolvido tem como objetivo principal a melhoria da eficiência na prestação de serviços de reparação de chapa e pintura na Caetano Auto Colisão, através da aplicação de ferramentas associadas à filosofia Lean. Apesar das ferramentas e técnicas lean estarem bem exploradas nas empresas de produção e manufatura, o mesmo não se verifica em relação às empresas da área dos serviços. O Value Stream Mapping é uma ferramenta lean que consiste no mapeamento do fluxo de materiais e informação necessários para a realização das atividades (que acrescentam e não acrescentam valor), desempenhadas pelos colaboradores, fornecedores e distribuidores, desde a obtenção do pedido do cliente até à entrega final do serviço. Através desta ferramenta é possível identificar as atividades que não acrescentam valor para o processo e propor medidas de melhoria que resultem na eliminação ou redução das mesmas. Com base neste conceito, foi realizado o mapeamento do processo de prestação de serviços de chapa e pintura e identificados os focos de ineficiência. A partir desta análise foram sugeridas melhorias que têm como objetivo atingir o estado futuro proposto assim como tornar o processo mais eficiente. Duas destas melhorias passaram pela implementação dos 5S na sala das tintas e pela elaboração de um relatório A3 para o centro de lavagens. O projeto realizado permitiu o estudo de um problema real numa empresa de serviços, bem como a proposta de um conjunto de melhorias que a médio prazo se espera virem a contribuir para a melhoria da eficiência na prestação de serviços de chapa e pintura.