聚苯胺对2,5-二巯基-1,3,4-噻二唑氧化还原反应的电化学催化作用的循环伏安研究

研究了聚苯胺 ( PAn)膜电极在 2 ,5-二巯基 -1 ,3 ,4 -噻二唑 ( DMc T)溶液中电化学处理或浸泡后的循环伏安 ( CV)曲线的变化规律 .实验结果表明 ,PAn膜电极在 DMc T溶液中进行电化学处理或浸泡过程可使DMc T进入 PAn膜内部与 PAn形成复合物 .PAn对 DMc T的电化学催化作用可能和二者之间形成的电子给体 -受体复合物有关 .该复合物的电化学氧化还原特性不同于 PAn和 DMc T,其氧化还原反应速率和可逆性均优于 DMc T

1,3—双烯聚合物的环化

采用AlEt2Cl－C6H5CH2Cl体系成功地对聚异戊二烯、聚了二烯、聚氯丁二烯3种1，3—双烯聚合物进行了环化，并对环化过程进行了比较。

Phase transition and transition kinetics of a thermotropic poly(amide-imide) derived from 70% pyromellitic dianhydride, 30% terephthaloyl chloride, and 1,3-bis[4-(4 '-aminophenoxy)cumyl]benzene

The phase transition and transition kinetics of a liquid crystalline copoly(amide-imide) (PAI37), which was synthesized from 70 mol% pyromellitic dianhydride, 30 mol% terephthaloyl chloride, and 1,3-bis[4-(4'-aminophenoxy)cumyl]benzene, was characterized by differential scanning calorimetry, polarized light microscopy, X-ray diffraction, and rheology. PAI37 exhibits a glass transition temperature at 182 degreesC followed by multiple phase transitions. The crystalline phase starts to melt at similar to 220 degreesC and forms smectic C (S-C) phase. The Sc phase transforms into smectic A (S-A) phase when the temperature is above 237 degreesC. The S-C to S-A transition spans a broad temperature range in which the S-A phase vanishes and forms isotropic melt. The WARD fiber pattern of PAI37 pulled from the anisotropic melt revealed an anomalous chain orientation, which was characterized by its layer normal perpendicular to the fiber direction. The transition kinetics for the mesophase and crystalline phase formation was also studied.

Synthesis and crystal structure of [Nd(eta(6)-1,3,5-C6H3Me3)(AlCl4)(3)]( C6H6) and structural comparison of Ln(eta(6)-arene)(AlCl4)(3)

Reaction of NdCl3, with AlCl3 and mesitylene in benzene gives complex [Nd(eta (6)-1,3,5-C6H3Me3) (AlCl4)(3)] (C6H6) (1) which was characterized by elemental analysis, IR spectra, MS and X-lay diffractions. The X-ray determination indicates that 1 has a distorted pentagonal bipyramidal geometry and crystallizes in the monoclinic, space group P2(1)/n with a = 0.9586(2), b = 1.1717(5), c = 2.8966(7) nm, beta = 90.85 (2)degrees, V = 3.2529(6) nm(3), D-c = 1.573 g/cm(3), Z = 4. A comparison of bond parameters for all the reported Ln(eta (6)-Ar) (AlCl4)(3) complexes indicates that the bond distance of Ln-C is shortened with the increasing of methyl group on benzene and with the decreasing of radius of lanthanide ions.

Synthesis of cis-(+/-)-2-hydroxymethyl-5-(cytosine-1 '-yl)-1,3-oxathiolane (BCH-189)

The target compound BCH-189 was synthesized with high yield via four steps from benzoyloxy acetylaldehyde and p-dithiane-2,5-diol as starting materials. The synthetic route is preferable to what literature reported.

Soluble 2,5-dimercapto-1,3,4-thiadiazole/poly(o-toluidine) electroactive composite

A poly(o-toluidine) (POT)/2,5-dimercapto-1,3,4-thiadiazole (DMcT) composite was prepared. When POT and DMcT are mixed in a proper solvent, POT in a medium-oxidation state is reduced, and DMcT in turn is oxidized to its soluble dimer when the molar ratio of DMcT to POT is higher than 0.5. Therefore, the composite was soluble in organic solvents such as tetrahydrofuran (THF), dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP) and exhibited very high electroactivity, two orders of magnitude higher than that of pure POT and three orders of magnitude higher than that of pure DMcT. Molecular-level contact between POT and DMcT is the reason for the improved catalytic effect of POT on DMcT, compared to that of polyaniline on DMcT. (C) 1999 The Electrochemical Society. S0013-4651(98)08-059-8. All rights reserved.

3-苯基-1-丁炔-3-醇质谱碎裂中[C_8H_7]~+的结构及分子内质子迁移反应

报道了3-苯基-1-丁炔-3-醇的常规电子轰击质谱(EIMS).利用碰撞诱导解离(CID)技术研究了质谱碎裂过程中产生的[C_8H_7]~+的气相离子结构.同时,氘代同位素交换、亚稳(MI)和CID实验进一步证实了m/z103离子的形成并不是分子离子的质谱碎裂中顺次失去甲基自由基和中性CO分子的直接氢迁移的协同反应,而是在失去CO分子前后发生了二次质子迁移反应的逐步过程.在此基础上提出了一种独特的双分子质子键合复合物中间体的碎裂机理.

The chemistry of alpha-oxo ketene cyclic dithioacetal .36. Studies on silica G catalyzed decomposition of adducts of beta,beta-1,3-propylenedithio-alpha,beta-unsaturated arylketones with grignard reagents

beta, beta-1, 3-Piopylenedithio-alpha, beta-unsaturated arylketones 2 via chemoselective 1,2-addition with allyl or benzyl Grignard reagents afforded the corresponding carbinols 3 and 4. Catalysed by silica gel, the carbinols 3 and 4 were converted to the beta,gamma-unsaturated arylketones 5, 6. The mechanism and reaction condition were discussed.

α-羰基烯酮环二硫代缩醛化学(XXXVI)──β,β-1,3-亚丙二流基-α,β-不饱和芳酮与Grignard试剂加成物的硅胶催化分解反应

以β，β-1，3-亚丙二硫基-α，β-不饱和芳酮2与烯丙基或等基Grfenard试剂可选择性地进行1，2-加成得醇3、4，在硅胶G的催化下，醇3、4可分解生成β，γ-不饱和芳酮5、6．并对该分解反应的机制进行了初步探讨.

The crystal structure and drawing-induced polymorphism in poly(aryl ether ketone)s .1. Poly(oxybiphenyl-4-4'-diyloxy-1,4-phenylenecarbonyl-1,3-phenylenecarbonyl-1,4-phenylene)

Crystal structure and polymorphism induced by uniaxial drawing of a poly(aryl ether ketone) [PEDEKmK] prepared from 1,3-bis(4-fluorobenzoyl)benzene and biphenyl-4,4'-diol have been investigated by means of transmission electron microscopy (TEM), electron diffraction (ED), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC) techniques. The melting and recrystallization process in the temperature range of 250-260 degrees C, far below the next melting temperature (306 degrees C), was identified and found to be responsible for the remarkable changes in lamellar morphology. Based on WAXD and ED patterns, it was found that crystal structure of isotropic-crystalline PEDEKmK obtained under different crystallization conditions (melt-crystallization, cold-crystallization, solvent-induced crystallization, melting-recrystallization, and crystallization from solution) keeps the same mode of packing, i.e., a two-chain orthorhombic unit cell with the dimensions a = 0.784 nm, b = 0.600 nm, and c = 4.745 nm (form I). A second crystal modification (form II) can be induced by uniaxial drawing above the glass transition temperature, and always coexists with form I. This form also possesses an orthorhombic unit cell but with different dimensions, i.e., a = 0.470 nm, b = 1.054 nm, c = 5.064 nm. The 0.32 nm longer c-axis of form II as compared with form I is attributed to an overextended chain conformation due to the expansion of ether and ketone bridge bond angles during uniaxial drawing. The temperature dependence of WAXD patterns for the drawn PEDEKmK suggests that form II can be transformed into the more stable form I by relaxation of overextended chains and relief of internal stress at elevated temperature in absence of external tension.

Studies on organolanthanide complexes .58. Syntheses of 1,1'-(3-oxa-pentamethylene)dicyclopentadienyl divalent organolanthanides (Ln=Sm, Yb) and X-ray molecular structure of O(CH2CH2C5H4)(2)Yb(DME)

The compounds O(CH2CH2C5H4)(2)Ln(THF)(2) [Ln = Sm(1), Yb(2)] were synthesized by the reduction of O(CH2CH2C5H4)(2)LnCl with sodium metal in tetrahydrofuran (THF) at room temperature. Recrystallization of 2 from dimethoxyethane (DME) produced the single-crystal O(CH2CH2C5H4)(2)Yb(DME) (3) whose structure has been determined by an X-ray diffraction study. The crystals are orthorhombic, space group Pcab, with a = 14.168(4), b = 13.541(6), c = 19.314(8) Angstrom, Z = 8, D-calc. = 1.66 g cm(-3).

LIFETIMES OF RYDBERG LEVELS IN THE PERTURBED 6SNP P-1,3(1) SERIES OF YBI

Using two methods: (1) three-step excitation and (2) single UV photon excitation in an atomic beam with direct observation of the decay of the fluorescence light, we have measured the lifetimes of the Rydberg levels of YbI belonging to the perturbed series 6snp J = 1 levels. The measured values have been interpreted by the multichannel quantum defect theory (MQDT).

2－（1，3－亚丙二硫基）亚甲基环己酮的晶体结构

报导了标题化合物Ｃ_（１０）Ｈ_（１４）ＯＳ_２（Ｍ_ｒ＝２１４．３５）的晶体结构，该晶体属正交晶系，空间群为Ｐ２_１２_１２_１，晶胞参数为ａ＝６．４４３（３），ｂ＝８．９８０（４），ｃ＝１８．２１３（７）；Ｖ＝１０５３．８（６）３；Ｚ＝４，Ｄ_ｘ＝１．３５ｇ／ｃｍ~３，Ｆ（０００）＝４５５，μ＝４．５ｃｍ~（－１）（ＭｏＫａ）。最终偏离因子Ｒ＝０．０３３，Ｒ_ｗ＝０．０３４。分子中的两支Ｃ_（ｓｐ）２－Ｓ键键长近于相等，分别为１．７６１（３）和１．７６９（３），Ｃ（１）－Ｃ（５）键长为１．３６１（４）。

有机磷化合物的质谱研究（XⅢ）．1，3，2－二氮磷杂环戊酮－（4）衍生物的电子轰击质谱

本文报道９种新的含磷杂环化合物的电子轰击质谱（ＥＩＭＳ），并应用Ｂ／Ｅ、Ｂ２／Ｅ联动扫描及精确质量测量技术，探讨了该类化合物的质谱断裂机理，发现骨架重排及开环反应是该类化合物主要的质谱特征，而Ｒ２基因对重排过程有很大影响。