Metais em plantas e algas : acumulação e potencial aplicação em processos de remediação

The present work reports the study of the bioaccumulation of potentially toxic elements (cadmium, lead and mercury) by marine macroalgae (Ulva lactuca, Fucus vesiculosus and Gracilaria gracilis), abundant in the coast and estuarine systems worldwide. These organisms proved to be capable of withstanding moderate multi-metallic contamination (environmentally relevant concentrations), incorporating high amounts of metal in their tissues. The high removal percentages achieved, in particular for mercury (99%), demonstrate the potential of these algae as a basis for a new biotechnological treatment of saline waters contaminated with metals (more efficient, cost-effective and environmentally friendly than conventional methods). U. lactuca was considered the most promising due to the better performance presented. The comparison between the bioaccumulation and biosorption processes suggested that in some cases the use of the living organism will have advantages over the application of biomass, due to the simplicity of the overall process, and the lower residual concentration of metal achieved in the solution (especially for Cd). The transfer and accumulation of Hg by terrestrial plants (Brassica juncea and Lolium perenne) in agricultural fields near a contaminated industrial area was also studied. Despite the low bioaccumulation factors found (<1), there were high Hg content in plants (up to 84 mg kg-1 in roots and up 6.9 mg kg-1 in shoots, dry weight). Daily intake estimates for grazing animals (cows and sheep) pointed to the potential risk to human health derived from consumption of their meat. The results highlighted the important role that plants and algae may have in protection, risk assessment and remediation of environmental systems contaminated with metals.

Occurrence and fate of estrogens and antibiotics in the environment evaluated by low-cost analytical methodologies

Endocrine disruptors and pharmaceuticals are considered to be concerning environmental contaminants. During the last two decades, studies dealing with the occurrence and fate of these emerging contaminants in the aquatic environment have raised attention and its number is constantly increasing. The presence of these contaminants in the environment is particularly important since they are known to induce adverse effects in the ecosystems even at extremely low concentrations. Estrogens and antibiotics, in particular, are identified as capable of induce endocrine disruption and contribute for the appearance of multi-resistant bacteria, respectively. A better assessment and understanding of the real impact of these contaminants in the aquatic environment implies the evaluation of their occurrence and fate, which is the main aim of this Thesis. Two estrogens (17-estradiol and 17-ethinylestradiol) and an antibiotic (sulfamethoxazole) were the contaminants under study and their occurrence in surface and waste waters was assessed by the implementation of enzyme linked immunosorbent assays (ELISAs). The assays were optimized in order to accomplish two important aspects: to analyze complex water samples, giving special attention to matrix effects, and to increase the sensitivity. Since the levels of these contaminants in the environment are extremely low, a pre-concentration methodology was also object of study in this Thesis. Dispersive liquid-liquid microextraction (DLLME) was developed for the preconcentration of E2 and EE2, subsequently quantified by either highperformance liquid chromatography (HPLC) and the previously optimized ELISAs. Moreover, the use of anthropogenic markers, i.e. indicators of human presence or activity, has been discussed as a tool to track the origin and type of contamination. An ELISA for the quantification of caffeine, as an anthropogenic marker, was also developed in order to assess the occurrence of human domestic pollution in Portuguese surface waters. Finally, photodegradation is considered to be one of the most important pathways contributing for the mitigation of pollutants’ presence in the aquatic environment. Both direct and indirect photodegradation of E2 and EE2 were evaluated. Since the presence of humic substances (HS) is known to have a noticeable influence on the photodegradation of pollutants and in order to mimic the real aquatic environment, special attention was given to the influence of the presence and concentration of different fractions of HS on the photodegradation of both hormones.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Qualidade da água na Ria Formosa: combinando técnicas de amostragem e de modelação para uma gestão integrada das águas residuais

Aplica-se uma técnica combinada de amostragem clássica, perfilagem in situ com sonda multiparamétrica e modelação matemática para avaliar a qualidade da água da Ria Formosa como meio receptor dos efluentes das ETAR’s. O sistema de modelação desenvolvido baseia-se num modelo hidrodinâmico que resolve as equações de águas pouco profundas pelo método dos volumes finitos acoplado a um modelo de transporte Lagrangiano para a simulação das plumas microbiológicas. Este sistema é usado como ferramenta de gestão para ensaiar diferentes cenários de descarga com variação da localização do ponto de descarga, analisando o impacto das alternativas no meio receptor.

A medição das preferências em recursos humanos: uma aplicação da análise conjunta na implementação de um sistema de acolhimento e integração - o caso da Empresa Municipal de Águas e Resíduos de Portimão - EMARP, EM

Dissertação mest., Gestão Empresarial, Universidade do Algarve, 2009

Ante-projecto de uma unidade de tratamento de águas residuais oleosas, no porto de Cádis

Dissertação de mest., Engenharia do Ambiente, Faculdade de Ciências do Mar e do Ambiente, Universidade do Algarve, 2008

Viabilização da reutilização de efluente tratado, usos, aplicações e respectivos impactos na gestão dos mesmos

Dissertação mest., Engenharia Biológica, Universidade do Algarve, 2008

Comparação dos métodos aplicados na detecção de bactérias coliformes, Escherichia coli e Enterococcus sp. em águas para fins recreativos

Dissertação mest., Qualidade em Análises, Universidade do Algarve, 2007

Diminuição do pico de cheia na rede de drenagem de águas pluviais através do sistema de aproveitamento de água da chuva

Dissertação de mest., Engenharia de Recursos Hídricos, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2010

Metodologia de avaliação de desempenho regional da sustentabilidade ambiental de instalações de tratamento, transporte e armazenamento de águas para consumo humano

Dissertação de mest., Recursos Hídricos, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2011

Avaliação de desempenho operacional de estações de tratamento de águas residuais como instrumento associado à reutilização da água na rega de campos de golfe

Dissertação de mest., Engenharia do Ambiente, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2009

Modelação do balanço hídrico do sistema aquífero da Campina de Faro: em diferentes cenários climáticos e de exploração de recursos

Dissertação de mestrado, Engenharia do Ambiente, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Métodos de observação durante a execução de obras subterrâneas

Mestrado em Engenharia Geotécnica e Geoambiente

Levantamento ambiental de uma indústria conserveira nos Açores

Dissertação de Mestrado em Ambiente, Saúde e Segurança.

A empresa e a questão ambiental

A atenção e cuidado para os recursos disponíveis na natureza ou a produção de produtos e resíduos que eventualmente venham a afectar o meio ambiente são variáveis com crescente importância no planeamento estratégico das empresas. Existe um movimento progressivo de consciencialização, inclusive nas empresas, visando um desenvolvimento económico sustentável que permita a prosperidade do património das empresas sem agressão ao meio ambiente natural, sendo o grande desafio a compatibilização do crescimento económico com a preservação da natureza. Os efeitos da interacção da empresa com o meio ambiente são identificáveis através de investimentos realizados em múltiplas tecnologias integradas no processo produtivo: o montante de obrigações assumidas pela empresa para recuperação de áreas degradadas ou águas contaminadas; as provisões ou reservas para ocorrer a perdas patrimoniais provocados por adversidades de natureza ambiental; e, finalmente, os custos e despesas para contenção dos níveis de poluição. Defende-se que no Balanço Patrimonial das empresas se incluam nos seus activos as aplicações de recursos que apresentem como objectivo a protecção e a recuperação ambiental, assim como todos os investimentos realizáveis como forma de prevenção aos efeitos poluentes.