Caraterização das propriedades macânicas e de fratura de um adesivo estrutural de alta ductilidade

As juntas adesivas são uma alternativa viável para substituir ligações comuns como as mecânicas ou soldadas, devido a diversas vantagens como a possibilidade de união de materiais de natureza diferente, maior leveza, menores custos inerentes ao fabrico e ainda prevenção da corrosão galvânica que pode ocorrer nas ligações entre dois materiais metálicos diferentes. A resistência de uma junta depende, para um determinado tipo de solicitação imposta, da distribuição de tensões no interior da junta. Por outro lado, a geometria das juntas, as propriedades mecânicas dos adesivos e os componentes a ligar vão influenciar a distribuição de tensões. O carregamento nas camadas adesivas de uma junta poderá induzir tensões de tração, compressão, corte, arrancamento ou clivagem, ou ainda uma combinação de duas ou mais destas componentes. O objetivo da presente dissertação é a caraterização completa de um adesivo estrutural de alta ductilidade recentemente lançado no mercado (SikaPower® -4720), para facilitar o projeto e otimização de juntas adesivas ligadas com o mesmo. São quatro os ensaios a realizar: ensaios à tração de provetes maciços (também denominados de bulk), ensaios ao corte com a geometria Thick Adherend Shear Test, ensaios Double-Cantilever Beam e ainda ensaios End-Notched Flexure. Com a realização dos ensaios referidos, são determinadas as propriedades essenciais à caraterização mecânica e de fratura do adesivo. Os resultados obtidos para cada ensaio resultaram em propriedades medidas com elevada repetibilidade, da mesma maneira que se revelaram de acordo com os dados disponibilizados pelo fabricante, sempre que estes estavam disponíveis.

Patologia óssea do insuficiente renal crónico: desafio clínico-biológico ; Caracterização da osteodistrofia renal e efeitos da biocompatibilidade de membranas de hemodiálise, na remodelação óssea

Resumo: Os resultados das nossas investigações, apresentadas ao longo desta dissertação,contribuíram para a otimização do diagnóstico invasivo e não invasivo da osteodistrofia renal e permitiram evidenciar a relevância, para a expressão clínica e histológica da ODR, de algumas articularidades específicas da população hemodialisada, nomeadamente: a utilização de membranas de hemodiálise mais biocompatíveis e com elevada permeabilidade, o recurso a técnicas de hemodiafiltração com otimização da capacidade convectiva, as limitações dos marcadores bioquímicos de remodelação óssea ou a insuficiência / deficiência em vitamina D nativa (bem como os resultados da suplementação com esta vitamina). Testámos, pela primeira vez em doentes hemodialisados, novos marcadores da formação e reabsorção óssea, que validámos mediante a comparação com os resultados da histomorfometria óssea. No seu conjunto, e de forma integrada, as nossas investigações permitiram-nos: - Evidenciar a diminuição da expressão do recetor da PTH/PTHrP na cartilagem de crescimento, num modelo animal de IRC, o que explica, pelo menos em parte, o atraso de crescimento observado nesta patologia, bem como a diminuição da resposta à ação da PTH; - Demonstrar as vantagens da determinação da isoforma óssea da fosfatase alcalina, em relação à fosfatase alcalina total, no diagnóstico diferencial entre baixa e elevada remodelação óssea; - Utilizar, pela primeira vez em hemodialisados, a piridinolina e a desoxipiridinolina no diagnóstico da reabsorção óssea. Este foi o primeiro marcador sérico específico da atividade osteoclástica, utilizado com sucesso em doentes anúricos em hemodiálise. Evidenciámos uma excelente correlação destes dois marcadores bioquímicos com a superfície osteoclástica e com o número de osteoclastos/mm2;- Demonstrar as acentuadas limitações de outros marcadores da formação e reabsorção óssea (nomeadamente a osteocalcina, o propeptido carboxiterminal do procolagénio tipo I-PICP, e o Telopeptido do colagénio tipo I – ICTP) com base nas correlações entre os doseamentos séricos ou plasmáticos destes marcadores e a biópsia óssea com avaliação histomorfométrica; -Evidenciar as limitações induzidas pela sobrecarga alumínica na interpretação dos níveis séricos dos marcadores não invasivos da remodelação óssea;-Testar a eficácia e segurança da utilização de “microdoses” de desferroxamina na terapêutica da intoxicação alumínica, em doentes com acentuada exposição a este metal;-Demonstrar que os doentes hemodialisados cronicamente com dialisadores de poliacrilonitrilo (membranas de alta permeabilidade),apresentavam menor ativação osteoblástica e osteoclástica, que os doentes dialisados com membranas de cuprofano(baixa permeabilidade), sendo os níveis de iPTH semelhantes em ambos os grupos estudados. Estes resultados apontam para uma menor ativação da remodelação óssea quando se utilizam membranas de hemodiálise mais biocompatíveis e/ou de maior permeabilidade, o que se poderá relacionar com a ultrafiltração de mediadores da ativação celular ou com a menor ativação dos mecanismos estimuladores da remodelação óssea, por parte destas membranas. Entre os mediadores da remodelação óssea que demonstrámos serem relevantes e estarem aumentados no soro de hemodialisados com membranas de baixo fluxo, contam-se a beta-2-microglobulina (2-M) e algumas citoquinas, com ação estimuladora das linhagens celulares envolvidas na remodelação óssea. Demonstrámos igualmente uma correlação positiva dos níveis séricos de 2-M com os níveis séricos da osteocalcina, da isoenzima óssea da fosfatase alcalina (marcadores da formação óssea) e com os níveis séricos da piridinolina (marcador da reabsorção óssea). Os níveis séricos de 2-M correlacionaram-se ainda, de forma negativa, com o volume osteoide (matriz óssea não calcificada). Nestes doentes hemodialisados, demonstrámos a presença de níveis séricos aumentados da interleucina-1, do antagonista do recetor da interleucina-1, da interleucina-6 e do recetor solúvel da interleucina-6. Salientamos as relações inversas que observámos, por um lado entre os níveis de antagonista do recetor da interleucina-1 e a superfície osteoblástica, e por outro lado entre o rácio do recetor da interleucina-6 / interleucina-6 (IL6-r/IL6) e a superfície osteoclástica. De acordo com estes nossos resultados originais, entendemos que a interferência nos níveis circulantes e na ativação local destes mediadores poderá justificar, em grande parte, o aumento da prevalência de doença óssea adinâmica, descrita por nós e por outros grupos. Evidenciámos uma elevadíssima prevalência de doença adinâmica (>50% dos doentes), numa população de hemodialisados sem exposição prévia ao alumínio, tratados de acordo com os K/DOQI “guidelines” e que ao longo de um ano mantiveram níveis séricos de cálcio e de fósforo controlados. Consequentemente, os doentes tratados de forma otimizada apresentaram uma prevalência surpreendentemente elevada de doença adinâmica. Os nossos resultados (classificados com o grau de evidência máxima pelos peritos KDIGO) contribuíram para dar suporte à grande diferença nos guidelines K/DOQI (2003) e KDIGO (2009) no que respeita aos valores alvo da PTH. Estamos conscientes que de que o facto de termos uma percentagem tão elevada de doença óssea adinâmica nas nossas populações de hemodialisados, bem como a demonstração de que alguns doentes com valores de PTH intacta (2ª geração) de cerca de 600 pg/ml tinham doença óssea adinâmica, condicionaram os novos objetivos KDIGO para a PTH. Os nossos resultados suportam, em nossa opinião, a adequação e vantagem da utilização dos critérios da KDIGO em vez dos KDOQI. Tendo em conta que os primeiros definem objetivos para a PTH entre 2 e 9 vezes o limite superior do normal e não se comprometem com valores alvo absolutos e rígidos (definidos previamente nos KDOQI entre 150 e 300 pg/mL), esta nova abordagem parece-nos mais correta.Na nossa investigação clínica, caracterizámos ainda a população hemodialisada portuguesa no que respeita aos níveis séricos de calcidiol, identificando a população com suficiência, insuficiência ou deficiência em vitamina D3. Documentámos uma acentuada prevalência de insuficiência e mesmo de deficiência nesta vitamina, numa vasta população de hemodialisados, a qual, muito provavelmente, reflete de forma fidedigna, o que se pode observar na restante população de doentes portugueses IRC em estádio 5d (em diálise). Descrevemos, pela primeira vez em doentes hemodialisados, uma associação entre deficiência em calcidiol e a presença de fatores de risco cardiovascular (que têm sido identificados nos doentes urémicos). A nossa investigação conduziu-nos a resultados originais, ao identificar os níveis baixos de 25(OH)vitamina D3 como um provável fator de risco cardiovascular em hemodialisados, visto que a deficiência nesta vitamina se associou, de forma muito significativa, ao aumento da prevalência de calcificações vasculares, a inflamação, a pressão de pulso mais elevada, a hipertrofia ventricular esquerda, a insuficiência cardíaca e a níveis séricos aumentados de “BNP-Brain natriuretic peptide”. Finalmente, numa avaliação prospetiva, de intervenção terapêutica, corrigimos a insuficiência ou deficiência em 25(OH)vitamina D3 e demonstrámos que essa correção se associou a uma redução dos fatores de risco cardiovascular. Esta última intervenção foi totalmente inovadora, visto ser a primeira avaliação prospetiva da evolução dos fatores de risco cardiovasculares, em função da suplementação com vitamina D nativa, em doentes hemodialisados. Em resumo, pensamos que os resultados das nossas investigações, acima sumarizadas e apresentadas ao longo dos diversos capítulos desta dissertação,contribuiram para uma nova perspetiva da osteodistrofia renal e para recolocar o foco da atenção dos nefrologistas no tecido ósseo e no eixo paratormona – vitamina D – remodelação óssea. Este eixo surje claramente envolvido em múltiplos processos fisiopatológicos, que suportam a elevada morbilidade e mortalidade (nomeadamente de causa cardiovascular) observada nos doentes urémicos.---------ABSTRACT: The results of our research, presented throughout this thesis, contributed towards the optimisation of the invasive and non-invasive diagnosis of renal osteodystrophy. They have also highlighted the importance, to the clinical and histological expression of the ODR, of some specific characteristics of the haemodialysis population, including: the use of biocompatible high permeability haemodialysis membranes, the use of haemodiafiltration techniques with convection enhancement, as well as the limitations of biochemical markers of bone turnover or native vitamin D insufficiency/deficiency (along with the supplementation results of this vitamin). New bone formation and resorption markers, which were validated by comparison with the results of bone histomorphometry, have been tested for the first time on haemodialysis patients.As a whole, and in an integrated approach, our research enabled us to: - Show the decrease of the PTH/PTHrP receptor expression in cartilage growth, used on an IRC animal model, which explains, to some extent, not only the delayed growth observed in this pathology, but also the slow response to PTH. - Point out the advantages of the determination of bone isoform of alkaline phosphatase, in relation to the total alkaline phosphatase, in the differential diagnosis between low and high-bone turnover.- Use pyridinoline and deoxypyridinoline in the diagnosis of bone resorption for the first time on haemodialysis patients. This was the first specific serum market of the osteoclastic activity, which was successfully used on anuric patients undergoing haemodialysis treatment. We also observed an excellent correlation of these biochemical markers with the osteoclastic surface and the number of osteoclasts/mm2. - Demonstrate the sharp limitations of other markers of bone formation and resorption (namely osteocalcin, carboxyterminal propeptide of type I-PICP procollagen and telopeptide of type I-ICTP collagen) based on correlations between these markers’ serum or plasma assays and bone biopsy with histomorphometric assessment.-Show the limitations induced by aluminium overload in the interpretation of serum levels of bone remodelling non-invasive markers.-Test the efficacy and the safety of the use of deferoxamine “microdoses” for treatment of aluminium overload among patients with high levels of serum aluminium. - Demonstrate that patients with chronic haemodialysis dialysers of polyacrylonitrile (high permeability membranes) show a lower osteoblastic and osteoclastic activation than those undergoing dialysis with cuprofan membranes (low permeability), being the iPTH levels similar in both groups of patients. These findings point towards a lower activation of bone remodelling when using more biocompatible dialysis membranes and/or of higher permeability, which may relate to the ultrafiltration of cell activation mediators or to the lower activation of the stimulating mechanisms of bone remodelling, regarding the membranes. Beta-2-microglobulin (2-M) and some cytokines that play a role/participate in bone remodelling are among the bone remodelling mediators, which we demonstrated to be relevant and to be increased in the serum of haemodialysis with low flow membranes. We also proved that there is a positive correlation of serum 2-M levels not only with serum osteocalcin levels, of the bone isoenzyme of alkaline phosphatase (bone forming markers), but also with levels of serum pyridinoline (bone resorption marker).Serum 2-M levels correlate negatively with the volume of osteoid (uncalcified bone matrix). We also demonstrated the presence of elevated serum levels of interleukin-1,interleukin-1 receptor antagonist, interleukin-6 and soluble interleukin-6 receptor in haemodialysis patients. We stress the inverse relationship which we observed on one hand between the interleukin-1 receptor antagonist levels and the osteoblastic surface and on the other between the ratio of interleukin-6 receptor / interleukin-6 (IL6-r/IL6) and the osteoblastic surface. According to these unique findings, we believe that the interference in the circulating levels and in the local activation of these mediators may partly explain the rising prevalence of adynamic bone disease. A high prevalence of adynamic disease has also been observed in a haemodialysis population (>50% of patients) with no previous exposure to aluminium. The patients were treated according to K/DOQI guidelines and maintained controlled serum calcium and phosphorus levels over one year. As a result, the patients who received optimised treatment showed a surprisingly high prevalence of adynamic disease. Our results, which were ranked with the highest degree of evidence by KDIGO experts, contributed to the great difference regarding the target values of PTH in the K/DOQI (2003) and KDIGO (2009) guidelines. We are aware that the finding of such a high percentage of adynamic bone disease in our haemodialysis population, as well as the evidence that some patients with intact PTH values (2nd generation) of 600 pg/ml suffered from adynamic bone disease, have hindered, the new KDIGO objectives to PTH.In our opinion, our results support the suitability and the advantage of using KDIGO criteria instead of KDOQI. This seems to be the right approach when taking into consideration that KDIGO sets objectives to PTH between 2 and 9 times the normal upper limit and does not compromise with the rigid and absolute target values (between 150 and 300 pg/mL) previously defined by KDOQI. In our clinical research, the Portuguese haemodialysis population was characterised in terms of serum clacidiol levels and identified as having vitamin D3 sufficiency, insufficiency or deficiency. It was also recorded the prevalence of severe vitamin D3 insufficiency and even deficiency in a large haemodialysis population, which most likely provides a reliable picture of the rest of the population in IRC Portuguese patients with 5d stage (undergoing dialysis). We described for the first time in aemosialysis patients an association between calcidiol deficiency and the presence of ardiovascular risk factors, (which have been identified on uraemic patients).Our research led us to unique findings by having identified the low levels of 25(OH) vitamin D3 as a likely cardiovascular risk factor in patients undergoing haemodialysis treatment, given that deficiency in this vitamin has been significantly associated not only with a rise in the prevalence of vascular calcifications, but also inflammation, left ventricular hypertrophy, high pulse pressure and high serum BNPBrain natriuretic peptide levels. Finally, based on a prospective assessment of therapeutic intervention, 25(OH)vitamin D3 insufficiency or deficiency was corrected and we were able to demonstrate that this same correction was associated with a reduction in cardiovascular risk factors. This was a forward-looking intervention regarding the supplementation of native vitamin D in haemodialysis patients, since it was the first prospective assessment of the evolution of cardiovascular risk factors. In short, the results of our research, summarised above and presented throughout the various chapters of this thesis, contributed towards a new perspective of the renal osteodystrophy and also to draw the nephrologists’ attention to the bone tissue and to the axis PTH – vitamin D – bone remodelling. This axis appears clearly involved in multiple physiopathological processes, which support the high morbidity and mortality rate, (particularly of cardiovascular causes), observed in uraemic patients.

Evaluation of air lime and clayish earth mortars for earthen wall renders

CIAV2013 – International Conference on Vernacular Architecture, 7º ATP, VerSus, 16-20 october 2013

Natural hydraulic lime mortars with ceramic residues for masonry

9th International Masonry Conference 2014, 7-9 July, Universidade do Minho, Guimarães

Hygrothermal behaviour of earthen plasters for sustainable housing construction

A ready-mixed and several laboratory formulated mortars were produced and tested in fresh state and after hardening, simulating a masonry plaster for indoor application. All the mortars used a clayish earth from the same region and different compositions of aggregates, eventually including fibres and a phase change material. All the formulated mortars were composed by 1:3 volumetric proportions of earth and aggregate. Tests were developed for consistency, fresh bulk density, thermal conductivity, capillary absorption and drying, water vapour permeability and sorption-desorption. The use of PCM changed drastically the workability of the mortars and increased their capillary absorption. The use of fibres and variations on particle size distribution of the mixtures of sand that were used had no significant influence on tested properties. But particularly the good workability of these mortars and the high capacity of sorption and desorption was highlighted. With this capacity plasters made with these mortars are able to adsorb water vapour from indoor atmosphere when high levels of relative humidity exist and release water vapour when the indoor atmosphere became too dry. This fact makes them able to contribute passively for a healthier indoor environment. The technical, ecological and environmental advantages of the application of plasters with this type of mortars are emphasized, with the aim of contributing for an increased use for new or existent housing.

Geopolymers as infill material for conservation of azulejos

The restoration materials currently used to fill gaps in architectural historical azulejos (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness and durability. The existing solutions do not fully protect azulejos in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers, namely the type of activators, the aluminosilicate source, the amount of water (to meet adequate workability requirements) and curing conditions were studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor architectural historical azulejos frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos are also discussed. Several techniques were used to study the chemical and physical behavior of geopolymers, namely FT-IR, XRD, MIP, SEM-EDS, WDXRF, electrical conductivity, open porosity, bending strength, adhesion strength, water vapour permeability, thermal expansion and hydric expansion. The results indicate that geopolymers are a promising material for restoration of azulejos, exhibiting some properties, such as adhesion to the ceramic substrate, higher than inorganic materials used nowadays, such as aerial lime based pastes.

Ideation at Canon business services

Digitalisation, globalisation, and evolving customer demands are only a few of the factors that are bound to transform the business process services industry for CBS. By investigating new ways to address these imminent challenges, this thesis explores the feasibility of implementing a formal approach to ideation to complement CBS’ service innovation practice. Two workshops were therefore conducted to put theory into action by generating new service ideas in a multifunctional team. Applying both divergent and convergent ideation techniques revealed that the latter improved an idea’s novelty and creativity as opposed to the expected increase in workability and relevance. Additionally, further analysis sheds light into the potential influence of individual characteristics and group dynamics on creativity. The thesis concludes with a discussion on the organisational implications of the findings and recommendations for future research.

Sustainable mortars with incorporation of microencapsulated phase change materials

The construction industry is responsible for high energy and raw materials consumption. Thus, it is important to minimize the high energy consumption by taking advantage of renewable energy sources and reusing industrial waste, decreasing the extraction of natural materials. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. The simultaneous incorporation of PCM and fly ash (FA) can reduce the energy consumption and the amount of materials landfilled. However, the addition of these materials in mortars modifies its characteristics. The main purpose of this study was the production and characterization in the fresh and hardened state of mortars with incorporation of different contents of PCM and FA. The binders studied were aerial lime, hydraulic lime, gypsum and cement. The proportion of PCM studied was 0%, 20%, 40% and 60% of the mass of the sand. The content of fly ash added to the mortars was 0%, 20%, 40% and 60% of the mass of the binder. It was possible to observe that the incorporation of PCM and fly ash in mortars caused differences in properties such as workability, microstructure, water absorption, compressive strength, flexural strength and adhesion.

Mortars with incorporation of PCM based in different binders: mechanical and thermal behavior

Currently we are witnessing a huge concern of society with the parameters of comfort of the buildings and the energetic consumptions. It is known that there is a huge consumption of non-renewable sources of energy. Thus, it is urgent to develop and explore ways to take advantage of renewable sources of energy by improving the energy efficiency of buildings. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. However, the incorporation of phase change materials in mortars modifies its characteristics. The main purpose of this study was mechanical and thermal characterization of mortars with incorporation of PCM in mortars based in different binders. The binders studied were aerial lime, hydraulic lime, gypsum and cement. For each type of binder a reference composition (0% PCM) and a composition with incorporation of 40% of PCM were developed. It was possible to observe that the incorporation of PCM in mortars caused differences in properties such as workability, compressive strength, flexural strength and adhesion, however leads to an improvement of thermal behavior.

Controlo da qualidade de betões

Dissertação de mestrado em Construção e Reabilitação Sustentáveis

Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process

The performance of parts produced by Free Form Extrusion (FFE), an increasingly popular additive manufacturing technique, depends mainly on their dimensional accuracy, surface quality and mechanical performance. These attributes are strongly influenced by the evolution of the filament temperature and deformation during deposition and solidification. Consequently, the availability of adequate process modelling software would offer a powerful tool to support efficient process set-up and optimisation. This work examines the contribution to the overall heat transfer of various thermal phenomena developing during the manufacturing sequence, including convection and radiation with the environment, conduction with support and between adjacent filaments, radiation between adjacent filaments and convection with entrapped air. The magnitude of the mechanical deformation is also studied. Once this exercise is completed, it is possible to select the material properties, process variables and thermal phenomena that should be taken in for effective numerical modelling of FFE.

Tunnel engineering – influence of the type and the quantity of measurements in the back analysis of geomechanical parameters

The monitoring data collected during tunnel excavation can be used in inverse analysis procedures in order to identify more realistic geomechanical parameters that can increase the knowledge about the interested formations. These more realistic parameters can be used in real time to adapt the project to the real structure in situ behaviour. However, monitoring plans are normally designed for safety assessment and not especially for the purpose of inverse analysis. In fact, there is a lack of knowledge about what types and quantity of measurements are needed to succeed in identifying the parameters of interest. Also, the optimisation algorithm chosen for the identification procedure may be important for this matter. In this work, this problem is addressed using a theoretical case with which a thorough parametric study was carried out using two optimisation algorithms based on different calculation paradigms, namely a conventional gradient-based algorithm and an evolution strategy algorithm. Calculations were carried for different sets of parameters to identify several combinations of types and amount of monitoring data. The results clearly show the high importance of the available monitoring data and the chosen algorithm for the success rate of the inverse analysis process.

Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials

Nowadays, considering the high variety of construction products, adequate material selection, based on their properties and function, becomes increasingly important. In this research, a ranking procedure developed by Czarnecki and Lukowski is applied in mortars with incorporation of phase change materials (PCM). The ranking procedure transforms experimental results of properties into one numerical value. The products can be classified according to their individual properties or even an optimized combination of different properties. The main purpose of this study was the ranking of mortars with incorporation of different contents of PCM based in different binders. Aerial lime, hydraulic lime, gypsum and cement were the binders studied. For each binder, three different mortars were developed. Reference mortars, mortars with incorporation of 40% of PCM and mortars with incorporation of 40% of PCM and 1% of fibers, were tested. Results show that the incorporation of PCM in mortars changes their global performance.

The role of IFNγ in higher brain function: in health and under chronic stress

Tese de Doutoramento em Ciências da Saúde

FISHji: new ImageJ macros for the quantification of fluorescence in epifluorescence images

Fluorescence in situ hybridization (FISH) is based on the use of fluorescent staining dyes, however, the signal intensity of the images obtained by microscopy is seldom quantified with accuracy by the researcher. The development of innovative digital image processing programs and tools has been trying to overcome this problem, however, the determination of fluorescent intensity in microscopy images still has issues due to the lack of precision in the results and the complexity of existing software. This work presents FISHji, a set of new ImageJ methods for automated quantification of fluorescence in images obtained by epifluorescence microscopy. To validate the methods, results obtained by FISHji were compared with results obtained by flow cytometry. The mean correlation between FISHji and flow cytometry was high and significant, showing that the imaging methods are able to accurately assess the signal intensity of fluorescence images. FISHji are available for non-commercial use at http://paginas.fe.up.pt/nazevedo/.