Proyecto y lugar en la arquitectura doméstica de Jørn Utzon

En medio de un bosque danés, de altos arboles que se mueven al fuerte viento nórdico bajo el débil sol de las latitudes altas, y cargado de unos cuantos tableros de madera que consiguió de una exposición ya terminada, realizó Utzon su maqueta a escala real de su primera casa familiar en Hellebæk (1950-52) a la edad de treinta y dos años. De la misma manera que el pintor William Turner necesitó atarse a lo alto de un mástil de un barco, para vivir en directo una de las muchas tormentas que tantas y tantas veces había pintado en sus cuadros, el joven Utzon consideró indispensable introducirse dentro de la maqueta de su propia casa antes de construirla, para valorar in situ las potencialidades de aquel proyecto en relación al lugar. La obra de Jørn Utzon (1918-2008) es una arquitectura expectante y atenta del lugar donde se ubica. Jørn Utzon es un arquitecto de origen nórdico, que descubre su verdadera idiosincrasia en la cultura mediterránea, cultura en la que reside durante casi la mitad de toda su vida. Esta tesis se ha centrado en analizar exhaustivamente la relación de su arquitectura doméstica con el lugar donde se halla. Aspecto tan citado en la bibliografía existente de su obra, aunque nunca desarrollado de manera exhaustiva. El objetivo del análisis ha sido intentar encontrar invariantes o patrones que pudieran subyacer en su obra residencial en relación a ese tema. Para dicho análisis, se ha tomado una muestra suficientemente amplia de veinte viviendas o conjuntos residenciales (entre ellas sus cuatro viviendas familiares proyectadas), repartidas por cinco países (Suecia, Dinamarca, Reino Unido, España y Nueva Gales del Sur), que constituyen la tercera parte de su obra doméstica y la mitad de su obra construida residencial, así como las citas explícitas del autor sobre este tema en su obra escrita, y los planos o croquis de su obra gráfica. Como metodología de trabajo se ha recurrido a la consulta de las fuentes primarias: viajando y conociendo in-situ las casas seleccionadas en Dinamarca, Suecia, España y Australia; viviendo un mes en una de las casas (Can Lis) gracias a una beca del Gobierno danés y la Utzon Foundation; y realizando entrevistas a las personas que más cerca estuvieron del arquitecto en su entorno familiar y profesional. Asimismo, también se ha publicado parte de su contenido en medios internacionales: 4th International Utzon Symposium (7/3/2013-9/3/2014) y la página web oficial de Can Lis dependiente de la Utzon Foundation (www.canlis.dk). Las doce invariantes encontradas en relación al proyecto y lugar en los proyectos seleccionados, han sido agrupadas en torno a tres grandes elementos sobre los que Utzon constantemente reflexiona en sus escritos propios: horizonte, sol y material autóctono. Elementos que tienen su origen en la influencia que la navegación tuvo en su vida, y en su carácter espiritual y austero en lo material. La historia de Utzon es la de un nórdico, de vocación navegante, que encuentra su lugar en la cultura mediterránea, rodeado entre piedras de Marés, mientras divisa en silencio el horizonte marino en el umbral entre luz y sombra. ABSTRACT In the middle of a Danish forest, with high trees which move with the Nordic wind under the weak sun of high latitudes, and with the help of some wooden canvases acquired from an already completed exhibition, Jørn Utzon built a real-scale model of his first family house in Hellebæk (1950-52) at the age of thirty-two. In the same way that William Turner needed to be tied up on the top of a boat flagpole in order to have a first-hand experience of one of the many storms that he had depicted in his paintings so many times before, the young Utzon thought it was crucial to go into the model of his own house before building it, to evaluate in situ the potential of that project in relation to the place. Utzon’s work is architecture interested in and attentive of the place where it is situated. Jørn Utzon (1918-2008) is an architect of Nordic origin who discovered his own idiosyncrasy in the Mediterranean culture, in which he resided for half of his live. This thesis has focused on an exhaustive analysis of the relation between his domestic architecture and the place where it is located. This issue has been often cited in the existing bibliography, although it has never been exhaustively developed. The analysis objective has been to attempt to find invariants and patterns that could exist in his domestic work in relation to this subject. For this analysis, a sufficiently large sample has been selected: twenty houses or housing complexes (among others his own four family houses), distributed in five countries (Sweden, Denmark, United Kingdom, Spain and New South Wales), which constitute the third part of his domestic work, and half of his residential constructed projects, as well as Utzon’s written texts about this theme, and the drawings and sketches of his graphic work. The methodology used was based on consultation of primary sources: travelling and examining in situ the selected houses in Denmark, Sweden, Spain and Australia; living for a month in one of the houses (Can Lis) thanks to a research grant from the Danish Government and the Utzon Foundation; and interviewing people from his closest family and professional circles. Furthermore, part of the thesis has been published in international media: 4th International Utzon Symposium (7/3/2013-9/3/2014) and on the official web site of Can Lis, an Utzon Foundation subsidiary(www.canlis.dk). The twelve invariants discovered in relation to the project and the location of the selected projects, have been grouped according to three elements which Utzon continuously reflects upon in his own writings: the horizon, the sun and autochthonous material. Elements which originate from the influence that navigation had in his life, and from his spiritual and austere character. The story of Utzon is that of a Nordic person, with the vocation of a navigator, who found his place in the Mediterranean culture, surrounded with Marés stones, while silently making out the sea horizon on the threshold between light and shadow.

Analysing the complexity of the model-based decision making processes within the industrial management context

PURPOSE The decision-making process plays a key role in organizations. Every decision-making process produces a final choice that may or may not prompt action. Recurrently, decision makers find themselves in the dichotomous question of following a traditional sequence decision-making process where the output of a decision is used as the input of the next stage of the decision, or following a joint decision-making approach where several decisions are taken simultaneously. The implication of the decision-making process will impact different players of the organization. The choice of the decision- making approach becomes difficult to find, even with the current literature and practitioners’ knowledge. The pursuit of better ways for making decisions has been a common goal for academics and practitioners. Management scientists use different techniques and approaches to improve different types of decisions. The purpose of this decision is to use the available resources as well as possible (data and techniques) to achieve the objectives of the organization. The developing and applying of models and concepts may be helpful to solve managerial problems faced every day in different companies. As a result of this research different decision models are presented to contribute to the body of knowledge of management science. The first models are focused on the manufacturing industry and the second part of the models on the health care industry. Despite these models being case specific, they serve the purpose of exemplifying that different approaches to the problems and could provide interesting results. Unfortunately, there is no universal recipe that could be applied to all the problems. Furthermore, the same model could deliver good results with certain data and bad results for other data. A framework to analyse the data before selecting the model to be used is presented and tested in the models developed to exemplify the ideas. METHODOLOGY As the first step of the research a systematic literature review on the joint decision is presented, as are the different opinions and suggestions of different scholars. For the next stage of the thesis, the decision-making process of more than 50 companies was analysed in companies from different sectors in the production planning area at the Job Shop level. The data was obtained using surveys and face-to-face interviews. The following part of the research into the decision-making process was held in two application fields that are highly relevant for our society; manufacturing and health care. The first step was to study the interactions and develop a mathematical model for the replenishment of the car assembly where the problem of “Vehicle routing problem and Inventory” were combined. The next step was to add the scheduling or car production (car sequencing) decision and use some metaheuristics such as ant colony and genetic algorithms to measure if the behaviour is kept up with different case size problems. A similar approach is presented in a production of semiconductors and aviation parts, where a hoist has to change from one station to another to deal with the work, and a jobs schedule has to be done. However, for this problem simulation was used for experimentation. In parallel, the scheduling of operating rooms was studied. Surgeries were allocated to surgeons and the scheduling of operating rooms was analysed. The first part of the research was done in a Teaching hospital, and for the second part the interaction of uncertainty was added. Once the previous problem had been analysed a general framework to characterize the instance was built. In the final chapter a general conclusion is presented. FINDINGS AND PRACTICAL IMPLICATIONS The first part of the contributions is an update of the decision-making literature review. Also an analysis of the possible savings resulting from a change in the decision process is made. Then, the results of the survey, which present a lack of consistency between what the managers believe and the reality of the integration of their decisions. In the next stage of the thesis, a contribution to the body of knowledge of the operation research, with the joint solution of the replenishment, sequencing and inventory problem in the assembly line is made, together with a parallel work with the operating rooms scheduling where different solutions approaches are presented. In addition to the contribution of the solving methods, with the use of different techniques, the main contribution is the framework that is proposed to pre-evaluate the problem before thinking of the techniques to solve it. However, there is no straightforward answer as to whether it is better to have joint or sequential solutions. Following the proposed framework with the evaluation of factors such as the flexibility of the answer, the number of actors, and the tightness of the data, give us important hints as to the most suitable direction to take to tackle the problem. RESEARCH LIMITATIONS AND AVENUES FOR FUTURE RESEARCH In the first part of the work it was really complicated to calculate the possible savings of different projects, since in many papers these quantities are not reported or the impact is based on non-quantifiable benefits. The other issue is the confidentiality of many projects where the data cannot be presented. For the car assembly line problem more computational power would allow us to solve bigger instances. For the operation research problem there was a lack of historical data to perform a parallel analysis in the teaching hospital. In order to keep testing the decision framework it is necessary to keep applying more case studies in order to generalize the results and make them more evident and less ambiguous. The health care field offers great opportunities since despite the recent awareness of the need to improve the decision-making process there are many opportunities to improve. Another big difference with the automotive industry is that the last improvements are not spread among all the actors. Therefore, in the future this research will focus more on the collaboration between academia and the health care sector.

Adapting micro-economy of energy corporations to macroeconomy policies aiming at a sustainable economy

Esta Tesis surgió ante la intensidad y verosimilitud de varias señales o “warnings” asociadas a políticas dirigidas a reducir el peso del petróleo en el sector energético, tanto por razones económicas, como geopolíticas, como ambientales. Como tal Tesis se consolidó al ir incorporando elementos novedosos pero esenciales en el mundo petrolífero, particularmente las “tecnologías habilitantes”, tanto de incidencia directa, como el “fracking” como indirecta, del cual es un gran ejemplo el Vehículo Eléctrico (puro). La Tesis se definió y estructuró para elaborar una serie de indagaciones y disquisiciones, que comportaran un conjunto de conclusiones que fueran útiles para las corporaciones energéticas. También para la comprensión de la propia evolución del sector y de sus prestaciones técnicas y económicas, de cara a dar el servicio que los usuarios finales piden. Dentro de las tareas analíticas y reflexivas de la Tesis, se acuñaron ciertos términos conceptuales para explicar más certeramente la realidad del sector, y tal es el caso del “Investment burden”, que pondera la inversión específica (€/W) requerida por una instalación, con la duración del período de construcción y los riesgos tanto tangibles como regulatorios. Junto a ello la Tesis propone una herramienta de estudio y prognosis, denominada “Market integrated energy efficiency”, especialmente aplicable a dicotomías. Tal es el caso del coche térmico, versus coche eléctrico. El objetivo es optimizar una determinada actividad energética, o la productividad total del sector. Esta Tesis propone varias innovaciones, que se pueden agrupar en dos niveles: el primero dentro del campo de la Energía, y el segundo dentro del campo de las corporaciones, y de manera especial de las corporaciones del sector hidrocarburos. A nivel corporativo, la adaptación a la nueva realidad será función directa de la capacidad de cada corporación para desarrollar y/o comprar las tecnologías que permitan mantener o aumentar cuota de mercado. Las conclusiones de la Tesis apuntan a tres opciones principalmente para un replanteamiento corporativo: - Diversificación energética - Desplazamiento geográfico - Beneficiándose de posibles nuevos nichos tecnológicos, como son: • En upstream: Recuperación estimulada de petróleo mediante uso de energías renovables • En downstream: Aditivos orientados a reducir emisiones • En gestión del cambio: Almacenamiento energético con fines operativos Algunas políticas energéticas siguen la tendencia de crecimiento cero de algunos países de la OCDE. No obstante, la realidad mundial es muy diferente a la de esos países. Por ejemplo, según diversas estimaciones (basadas en bancos de datos solventes, referenciados en la Tesis) el número de vehículos aumentará desde aproximadamente mil millones en la actualidad hasta el doble en 2035; mientras que la producción de petróleo sólo aumentará de 95 a 145 millones de barriles al día. Un aumento del 50% frente a un aumento del 100%. Esto generará un curioso desajuste, que se empezará a sentir en unos pocos años. Las empresas y corporaciones del sector hidrocarburos pueden perder el monopolio que atesoran actualmente en el sector transporte frente a todas las demás fuentes energéticas. Esa pérdida puede quedar compensada por una mejor gestión de todas sus capacidades y una participación más integrada en el mundo de la energía, buscando sinergias donde hasta ahora no había sino distanciamiento. Los productos petrolíferos pueden alimentar cualquier tipo de maquina térmica, como las turbinas Brayton, o alimentar reformadores para la producción masiva de H2 para su posterior uso en pilas combustible. El almacenamiento de productos derivados del petróleo no es ningún reto ni plantea problema alguno; y sin embargo este almacenamiento es la llave para resolver muchos problemas. Es posible que el comercio de petróleo se haga menos volátil debido a los efectos asociados al almacenamiento; pero lo que es seguro es que la eficiencia energética de los usos de ese petróleo será más elevada. La Tesis partía de ciertas amenazas sobre el futuro del petróleo, pero tras el análisis realizado se puede vislumbrar un futuro prometedor en la fusión de políticas medioambientales coercitivas y las nuevas tecnologías emergentes del actual portafolio de oportunidades técnicas. ABSTRACT This Thesis rises from the force and the credibility of a number of warning signs linked to policies aimed at reducing the role of petroleum in the energy industry due to economical, geopolitical and environmental drives. As such Thesis, it grew up based on aggregating new but essentials elements into the petroleum sector. This is the case of “enabling technologies” that have a direct impact on the petroleum industry (such as fracking), or an indirect but deep impact (such as the full electrical vehicle). The Thesis was defined and structured in such a way that could convey useful conclusions for energy corporations through a series of inquiries and treatises. In addition to this, the Thesis also aims at understating la evolution of the energy industry and its capabilities both technical and economical, towards delivering the services required by end users. Within the analytical task performed in the Thesis, new terms were coined. They depict concepts that aid at explaining the facts of the energy industry. This is the case for “Investment burden”, it weights the specific capital investment (€/W) required to build a facility with the time that takes to build it, as well as other tangible risks as those posed by regulation. In addition to this, the Thesis puts forward an application designed for reviewing and predicting: the so called “Market integrated energy efficiency”, especially well-suited for dichotomies, very appealing for the case of the thermal car versus the electric car. The aim is to optimize energy related activity; or even the overall productivity of the system. The innovations proposed in this Thesis can be classified in two tiers. Tier one, within the energy sector; and tier two, related to Energy Corporation in general, but with oil and gas corporations at heart. From a corporate level, the adaptation to new energy era will be linked with the corporation capability to develop or acquire those technologies that will yield to retaining or enhancing market share. The Thesis highlights three options for corporate evolution: - diversification within Energy - geographic displacement - profiting new technologies relevant to important niches of work for the future, as: o Upstream: enhanced oil recovery using renewable energy sources (for upstream companies in the petroleum business) o Downstream: additives for reducing combustion emissions o Management of Change: operational energy storage Some energy policies tend to follow the zero-growth of some OECD countries, but the real thing could be very different. For instance, and according to estimates the number of vehicles in use will grow from 1 billion to more than double this figure 2035; but oil production will only grow from 95 million barrel/day to 145 (a 50% rise of versus an intensification of over a 100%). Hydrocarbon Corporation can lose the monopoly they currently hold over the supply of energy to transportation. This lose can be mitigated through an enhanced used of their capabilities and a higher degree of integration in the world of energy, exploring for synergies in those places were gaps were present. Petroleum products can be used to feed any type of thermal machine, as Brayton turbines, or steam reformers to produce H2 to be exploited in fuel cells. Storing petroleum products does not present any problem, but very many problems can be solved with them. Petroleum trading will likely be less volatile because of the smoothing effects of distributed storage, and indeed the efficiency in petroleum consumption will be much higher. The Thesis kicked off with a menace on the future of petroleum. However, at the end of the analysis, a bright future can be foreseen in the merging between highly demanding environmental policies and the relevant technologies of the currently emerging technical portfolio.

Trust-ware: A Methodology to Analyze, Design, and Secure Trust and Reputation Systems

Entendemos por inteligencia colectiva una forma de inteligencia que surge de la colaboración y la participación de varios individuos o, siendo más estrictos, varias entidades. En base a esta sencilla definición podemos observar que este concepto es campo de estudio de las más diversas disciplinas como pueden ser la sociología, las tecnologías de la información o la biología, atendiendo cada una de ellas a un tipo de entidades diferentes: seres humanos, elementos de computación o animales. Como elemento común podríamos indicar que la inteligencia colectiva ha tenido como objetivo el ser capaz de fomentar una inteligencia de grupo que supere a la inteligencia individual de las entidades que lo forman a través de mecanismos de coordinación, cooperación, competencia, integración, diferenciación, etc. Sin embargo, aunque históricamente la inteligencia colectiva se ha podido desarrollar de forma paralela e independiente en las distintas disciplinas que la tratan, en la actualidad, los avances en las tecnologías de la información han provocado que esto ya no sea suficiente. Hoy en día seres humanos y máquinas a través de todo tipo de redes de comunicación e interfaces, conviven en un entorno en el que la inteligencia colectiva ha cobrado una nueva dimensión: ya no sólo puede intentar obtener un comportamiento superior al de sus entidades constituyentes sino que ahora, además, estas inteligencias individuales son completamente diferentes unas de otras y aparece por lo tanto el doble reto de ser capaces de gestionar esta gran heterogeneidad y al mismo tiempo ser capaces de obtener comportamientos aún más inteligentes gracias a las sinergias que los distintos tipos de inteligencias pueden generar. Dentro de las áreas de trabajo de la inteligencia colectiva existen varios campos abiertos en los que siempre se intenta obtener unas prestaciones superiores a las de los individuos. Por ejemplo: consciencia colectiva, memoria colectiva o sabiduría colectiva. Entre todos estos campos nosotros nos centraremos en uno que tiene presencia en la práctica totalidad de posibles comportamientos inteligentes: la toma de decisiones. El campo de estudio de la toma de decisiones es realmente amplio y dentro del mismo la evolución ha sido completamente paralela a la que citábamos anteriormente en referencia a la inteligencia colectiva. En primer lugar se centró en el individuo como entidad decisoria para posteriormente desarrollarse desde un punto de vista social, institucional, etc. La primera fase dentro del estudio de la toma de decisiones se basó en la utilización de paradigmas muy sencillos: análisis de ventajas e inconvenientes, priorización basada en la maximización de algún parámetro del resultado, capacidad para satisfacer los requisitos de forma mínima por parte de las alternativas, consultas a expertos o entidades autorizadas o incluso el azar. Sin embargo, al igual que el paso del estudio del individuo al grupo supone una nueva dimensión dentro la inteligencia colectiva la toma de decisiones colectiva supone un nuevo reto en todas las disciplinas relacionadas. Además, dentro de la decisión colectiva aparecen dos nuevos frentes: los sistemas de decisión centralizados y descentralizados. En el presente proyecto de tesis nos centraremos en este segundo, que es el que supone una mayor atractivo tanto por las posibilidades de generar nuevo conocimiento y trabajar con problemas abiertos actualmente así como en lo que respecta a la aplicabilidad de los resultados que puedan obtenerse. Ya por último, dentro del campo de los sistemas de decisión descentralizados existen varios mecanismos fundamentales que dan lugar a distintas aproximaciones a la problemática propia de este campo. Por ejemplo el liderazgo, la imitación, la prescripción o el miedo. Nosotros nos centraremos en uno de los más multidisciplinares y con mayor capacidad de aplicación en todo tipo de disciplinas y que, históricamente, ha demostrado que puede dar lugar a prestaciones muy superiores a otros tipos de mecanismos de decisión descentralizados: la confianza y la reputación. Resumidamente podríamos indicar que confianza es la creencia por parte de una entidad que otra va a realizar una determinada actividad de una forma concreta. En principio es algo subjetivo, ya que la confianza de dos entidades diferentes sobre una tercera no tiene porqué ser la misma. Por otro lado, la reputación es la idea colectiva (o evaluación social) que distintas entidades de un sistema tiene sobre otra entidad del mismo en lo que respecta a un determinado criterio. Es por tanto una información de carácter colectivo pero única dentro de un sistema, no asociada a cada una de las entidades del sistema sino por igual a todas ellas. En estas dos sencillas definiciones se basan la inmensa mayoría de sistemas colectivos. De hecho muchas disertaciones indican que ningún tipo de organización podría ser viable de no ser por la existencia y la utilización de los conceptos de confianza y reputación. A partir de ahora, a todo sistema que utilice de una u otra forma estos conceptos lo denominaremos como sistema de confianza y reputación (o TRS, Trust and Reputation System). Sin embargo, aunque los TRS son uno de los aspectos de nuestras vidas más cotidianos y con un mayor campo de aplicación, el conocimiento que existe actualmente sobre ellos no podría ser más disperso. Existen un gran número de trabajos científicos en todo tipo de áreas de conocimiento: filosofía, psicología, sociología, economía, política, tecnologías de la información, etc. Pero el principal problema es que no existe una visión completa de la confianza y reputación en su sentido más amplio. Cada disciplina focaliza sus estudios en unos aspectos u otros dentro de los TRS, pero ninguna de ellas trata de explotar el conocimiento generado en el resto para mejorar sus prestaciones en su campo de aplicación concreto. Aspectos muy detallados en algunas áreas de conocimiento son completamente obviados por otras, o incluso aspectos tratados por distintas disciplinas, al ser estudiados desde distintos puntos de vista arrojan resultados complementarios que, sin embargo, no son aprovechados fuera de dichas áreas de conocimiento. Esto nos lleva a una dispersión de conocimiento muy elevada y a una falta de reutilización de metodologías, políticas de actuación y técnicas de una disciplina a otra. Debido su vital importancia, esta alta dispersión de conocimiento se trata de uno de los principales problemas que se pretenden resolver con el presente trabajo de tesis. Por otro lado, cuando se trabaja con TRS, todos los aspectos relacionados con la seguridad están muy presentes ya que muy este es un tema vital dentro del campo de la toma de decisiones. Además también es habitual que los TRS se utilicen para desempeñar responsabilidades que aportan algún tipo de funcionalidad relacionada con el mundo de la seguridad. Por último no podemos olvidar que el acto de confiar está indefectiblemente unido al de delegar una determinada responsabilidad, y que al tratar estos conceptos siempre aparece la idea de riesgo, riesgo de que las expectativas generadas por el acto de la delegación no se cumplan o se cumplan de forma diferente. Podemos ver por lo tanto que cualquier sistema que utiliza la confianza para mejorar o posibilitar su funcionamiento, por su propia naturaleza, es especialmente vulnerable si las premisas en las que se basa son atacadas. En este sentido podemos comprobar (tal y como analizaremos en más detalle a lo largo del presente documento) que las aproximaciones que realizan las distintas disciplinas que tratan la violación de los sistemas de confianza es de lo más variado. únicamente dentro del área de las tecnologías de la información se ha intentado utilizar alguno de los enfoques de otras disciplinas de cara a afrontar problemas relacionados con la seguridad de TRS. Sin embargo se trata de una aproximación incompleta y, normalmente, realizada para cumplir requisitos de aplicaciones concretas y no con la idea de afianzar una base de conocimiento más general y reutilizable en otros entornos. Con todo esto en cuenta, podemos resumir contribuciones del presente trabajo de tesis en las siguientes. • La realización de un completo análisis del estado del arte dentro del mundo de la confianza y la reputación que nos permite comparar las ventajas e inconvenientes de las diferentes aproximación que se realizan a estos conceptos en distintas áreas de conocimiento. • La definición de una arquitectura de referencia para TRS que contempla todas las entidades y procesos que intervienen en este tipo de sistemas. • La definición de un marco de referencia para analizar la seguridad de TRS. Esto implica tanto identificar los principales activos de un TRS en lo que respecta a la seguridad, así como el crear una tipología de posibles ataques y contramedidas en base a dichos activos. • La propuesta de una metodología para el análisis, el diseño, el aseguramiento y el despliegue de un TRS en entornos reales. Adicionalmente se exponen los principales tipos de aplicaciones que pueden obtenerse de los TRS y los medios para maximizar sus prestaciones en cada una de ellas. • La generación de un software que permite simular cualquier tipo de TRS en base a la arquitectura propuesta previamente. Esto permite evaluar las prestaciones de un TRS bajo una determinada configuración en un entorno controlado previamente a su despliegue en un entorno real. Igualmente es de gran utilidad para evaluar la resistencia a distintos tipos de ataques o mal-funcionamientos del sistema. Además de las contribuciones realizadas directamente en el campo de los TRS, hemos realizado aportaciones originales a distintas áreas de conocimiento gracias a la aplicación de las metodologías de análisis y diseño citadas con anterioridad. • Detección de anomalías térmicas en Data Centers. Hemos implementado con éxito un sistema de deteción de anomalías térmicas basado en un TRS. Comparamos la detección de prestaciones de algoritmos de tipo Self-Organized Maps (SOM) y Growing Neural Gas (GNG). Mostramos como SOM ofrece mejores resultados para anomalías en los sistemas de refrigeración de la sala mientras que GNG es una opción más adecuada debido a sus tasas de detección y aislamiento para casos de anomalías provocadas por una carga de trabajo excesiva. • Mejora de las prestaciones de recolección de un sistema basado en swarm computing y odometría social. Gracias a la implementación de un TRS conseguimos mejorar las capacidades de coordinación de una red de robots autónomos distribuidos. La principal contribución reside en el análisis y la validación de las mejoras increméntales que pueden conseguirse con la utilización apropiada de la información existente en el sistema y que puede ser relevante desde el punto de vista de un TRS, y con la implementación de algoritmos de cálculo de confianza basados en dicha información. • Mejora de la seguridad de Wireless Mesh Networks contra ataques contra la integridad, la confidencialidad o la disponibilidad de los datos y / o comunicaciones soportadas por dichas redes. • Mejora de la seguridad de Wireless Sensor Networks contra ataques avanzamos, como insider attacks, ataques desconocidos, etc. Gracias a las metodologías presentadas implementamos contramedidas contra este tipo de ataques en entornos complejos. En base a los experimentos realizados, hemos demostrado que nuestra aproximación es capaz de detectar y confinar varios tipos de ataques que afectan a los protocoles esenciales de la red. La propuesta ofrece unas velocidades de detección muy altas así como demuestra que la inclusión de estos mecanismos de actuación temprana incrementa significativamente el esfuerzo que un atacante tiene que introducir para comprometer la red. Finalmente podríamos concluir que el presente trabajo de tesis supone la generación de un conocimiento útil y aplicable a entornos reales, que nos permite la maximización de las prestaciones resultantes de la utilización de TRS en cualquier tipo de campo de aplicación. De esta forma cubrimos la principal carencia existente actualmente en este campo, que es la falta de una base de conocimiento común y agregada y la inexistencia de una metodología para el desarrollo de TRS que nos permita analizar, diseñar, asegurar y desplegar TRS de una forma sistemática y no artesanal y ad-hoc como se hace en la actualidad. ABSTRACT By collective intelligence we understand a form of intelligence that emerges from the collaboration and competition of many individuals, or strictly speaking, many entities. Based on this simple definition, we can see how this concept is the field of study of a wide range of disciplines, such as sociology, information science or biology, each of them focused in different kinds of entities: human beings, computational resources, or animals. As a common factor, we can point that collective intelligence has always had the goal of being able of promoting a group intelligence that overcomes the individual intelligence of the basic entities that constitute it. This can be accomplished through different mechanisms such as coordination, cooperation, competence, integration, differentiation, etc. Collective intelligence has historically been developed in a parallel and independent way among the different disciplines that deal with it. However, this is not enough anymore due to the advances in information technologies. Nowadays, human beings and machines coexist in environments where collective intelligence has taken a new dimension: we yet have to achieve a better collective behavior than the individual one, but now we also have to deal with completely different kinds of individual intelligences. Therefore, we have a double goal: being able to deal with this heterogeneity and being able to get even more intelligent behaviors thanks to the synergies that the different kinds of intelligence can generate. Within the areas of collective intelligence there are several open topics where they always try to get better performances from groups than from the individuals. For example: collective consciousness, collective memory, or collective wisdom. Among all these topics we will focus on collective decision making, that has influence in most of the collective intelligent behaviors. The field of study of decision making is really wide, and its evolution has been completely parallel to the aforementioned collective intelligence. Firstly, it was focused on the individual as the main decision-making entity, but later it became involved in studying social and institutional groups as basic decision-making entities. The first studies within the decision-making discipline were based on simple paradigms, such as pros and cons analysis, criteria prioritization, fulfillment, following orders, or even chance. However, in the same way that studying the community instead of the individual meant a paradigm shift within collective intelligence, collective decision-making means a new challenge for all the related disciplines. Besides, two new main topics come up when dealing with collective decision-making: centralized and decentralized decision-making systems. In this thesis project we focus in the second one, because it is the most interesting based on the opportunities to generate new knowledge and deal with open issues in this area, as well as these results can be put into practice in a wider set of real-life environments. Finally, within the decentralized collective decision-making systems discipline, there are several basic mechanisms that lead to different approaches to the specific problems of this field, for example: leadership, imitation, prescription, or fear. We will focus on trust and reputation. They are one of the most multidisciplinary concepts and with more potential for applying them in every kind of environments. Besides, they have historically shown that they can generate better performance than other decentralized decision-making mechanisms. Shortly, we say trust is the belief of one entity that the outcome of other entities’ actions is going to be in a specific way. It is a subjective concept because the trust of two different entities in another one does not have to be the same. Reputation is the collective idea (or social evaluation) that a group of entities within a system have about another entity based on a specific criterion. Thus, it is a collective concept in its origin. It is important to say that the behavior of most of the collective systems are based on these two simple definitions. In fact, a lot of articles and essays describe how any organization would not be viable if the ideas of trust and reputation did not exist. From now on, we call Trust an Reputation System (TRS) to any kind of system that uses these concepts. Even though TRSs are one of the most common everyday aspects in our lives, the existing knowledge about them could not be more dispersed. There are thousands of scientific works in every field of study related to trust and reputation: philosophy, psychology, sociology, economics, politics, information sciences, etc. But the main issue is that a comprehensive vision of trust and reputation for all these disciplines does not exist. Every discipline focuses its studies on a specific set of topics but none of them tries to take advantage of the knowledge generated in the other disciplines to improve its behavior or performance. Detailed topics in some fields are completely obviated in others, and even though the study of some topics within several disciplines produces complementary results, these results are not used outside the discipline where they were generated. This leads us to a very high knowledge dispersion and to a lack in the reuse of methodologies, policies and techniques among disciplines. Due to its great importance, this high dispersion of trust and reputation knowledge is one of the main problems this thesis contributes to solve. When we work with TRSs, all the aspects related to security are a constant since it is a vital aspect within the decision-making systems. Besides, TRS are often used to perform some responsibilities related to security. Finally, we cannot forget that the act of trusting is invariably attached to the act of delegating a specific responsibility and, when we deal with these concepts, the idea of risk is always present. This refers to the risk of generated expectations not being accomplished or being accomplished in a different way we anticipated. Thus, we can see that any system using trust to improve or enable its behavior, because of its own nature, is especially vulnerable if the premises it is based on are attacked. Related to this topic, we can see that the approaches of the different disciplines that study attacks of trust and reputation are very diverse. Some attempts of using approaches of other disciplines have been made within the information science area of knowledge, but these approaches are usually incomplete, not systematic and oriented to achieve specific requirements of specific applications. They never try to consolidate a common base of knowledge that could be reusable in other context. Based on all these ideas, this work makes the following direct contributions to the field of TRS: • The compilation of the most relevant existing knowledge related to trust and reputation management systems focusing on their advantages and disadvantages. • We define a generic architecture for TRS, identifying the main entities and processes involved. • We define a generic security framework for TRS. We identify the main security assets and propose a complete taxonomy of attacks for TRS. • We propose and validate a methodology to analyze, design, secure and deploy TRS in real-life environments. Additionally we identify the principal kind of applications we can implement with TRS and how TRS can provide a specific functionality. • We develop a software component to validate and optimize the behavior of a TRS in order to achieve a specific functionality or performance. In addition to the contributions made directly to the field of the TRS, we have made original contributions to different areas of knowledge thanks to the application of the analysis, design and security methodologies previously presented: • Detection of thermal anomalies in Data Centers. Thanks to the application of the TRS analysis and design methodologies, we successfully implemented a thermal anomaly detection system based on a TRS.We compare the detection performance of Self-Organized- Maps and Growing Neural Gas algorithms. We show how SOM provides better results for Computer Room Air Conditioning anomaly detection, yielding detection rates of 100%, in training data with malfunctioning sensors. We also show that GNG yields better detection and isolation rates for workload anomaly detection, reducing the false positive rate when compared to SOM. • Improving the performance of a harvesting system based on swarm computing and social odometry. Through the implementation of a TRS, we achieved to improve the ability of coordinating a distributed network of autonomous robots. The main contribution lies in the analysis and validation of the incremental improvements that can be achieved with proper use information that exist in the system and that are relevant for the TRS, and the implementation of the appropriated trust algorithms based on such information. • Improving Wireless Mesh Networks security against attacks against the integrity, confidentiality or availability of data and communications supported by these networks. Thanks to the implementation of a TRS we improved the detection time rate against these kind of attacks and we limited their potential impact over the system. • We improved the security of Wireless Sensor Networks against advanced attacks, such as insider attacks, unknown attacks, etc. Thanks to the TRS analysis and design methodologies previously described, we implemented countermeasures against such attacks in a complex environment. In our experiments we have demonstrated that our system is capable of detecting and confining various attacks that affect the core network protocols. We have also demonstrated that our approach is capable of rapid attack detection. Also, it has been proven that the inclusion of the proposed detection mechanisms significantly increases the effort the attacker has to introduce in order to compromise the network. Finally we can conclude that, to all intents and purposes, this thesis offers a useful and applicable knowledge in real-life environments that allows us to maximize the performance of any system based on a TRS. Thus, we deal with the main deficiency of this discipline: the lack of a common and complete base of knowledge and the lack of a methodology for the development of TRS that allow us to analyze, design, secure and deploy TRS in a systematic way.

Arquifanía: la arquitectura como manifestación

Arquifanía: arquitectura y epifanía. La revelación que se da en el proyectar, en el construir y en el habitar. Desentrañar los protagonistas y el escenario de ese encuentro es el objetivo de esta tesis. Nace de una doble inquietud: la relación entre literatura y arquitectura y la constatación de algo inconmensurable en la arquitectura. A lo largo de los siglos la teoría de la arquitectura ha hecho un gran esfuerzo por racionalizar todos los aspectos de la disciplina. La sistematización del orden y jerarquía de los espacios, el uso de parámetros más rigurosos en los cálculos estructurales, el desarrollo de la técnica y el estudio de los esquemas funcionales han supuesto una fuente inagotable de manifestaciones arquitectónicas. Los paradigmas científicos, incluso, han resultado fundamentales en la creación de nuevos lenguajes. Sin embargo, en este camino de racionalización se han orillado aspectos de difícil cuantificación. Pese a que en la experiencia diaria del arquitecto se constata la presencia de parámetros inconmensurables, la teoría de la arquitectura no ha integrado de forma sistemática este conocimiento. De aquí nace la presente tesis doctoral. En ella se estudia, por analogía con el resto de artes, el concepto de manifestación. Se analiza de qué manera la obra arquitectónica se manifiesta, haciendo uso de su autonomía, y se convierte en la que dirige al arquitecto en todos los tiempos de la existencia de la obra: desde su génesis en el tiempo del proyecto hasta la experiencia de la obra terminada en el tiempo de la historia. Se considera que reflexionar en el concepto de manifestación puede aportar luces sobre la disciplina arquitectónica en un doble momento. Se estudia por una parte la actitud y el proceder del arquitecto ante la génesis del proyecto y por otra su posicionamiento ante la obra ya existente, sometida a su análisis (para la posterior síntesis) generando una espiral de conocimiento siempre abierta y en continuo enriquecimiento. Se analiza la obra de María Zambrano, filósofa, y José Ángel Valente, poeta, en busca de la definición del concepto de manifestación. El momento creativo, la naturaleza de la palabra poética, la actitud del poeta ante su obra, el conocimiento y la revelación de la belleza son temas recurrentes en sus obras y crean un corpus teórico que permite elaborar una teoría poética sólida y abierta, llena de sugerencias que se dirige con precisión al momento de la generación de la forma: su epifanía. A continuación se repasa el concepto de manifestación en la actividad de algunos artistas de la modernidad que, de manera implícita o explícita, han hablado del concepto de epifanía. A menudo de forma intuitiva, los artistas han detectado en su actividad la condición de ser depositarios de un don que se renueva en cada obra ejecutada. Entrelazado con su trabajo y con la disciplina diaria los artistas experimentan un diálogo con la obra, que se revela libre y con voluntad de manifestarse. Enunciado el problema y hecho el repaso por el mundo de la creación artística, nos enfrentamos con el núcleo de la tesis: ¿hasta qué punto y de qué manera el concepto de manifestación es válido en arquitectura? El discurso busca en la actividad de múltiples arquitectos la validez del concepto de manifestación. Se rastrean testimonios, textos, obras y análisis de obras. De esta investigación surge una topografía, un atlas de revelaciones de manifestaciones arquitectónicas: constataciones explícitas, testimonios implícitos o intuiciones. A través de este periplo entre el concepto de manifestación que la razón poética ofrece y la experiencia de muchos arquitectos se intenta responder, aunque sea parcialmente, a las preguntas que surgen al llevar a las últimas consecuencias la arquifanía: ¿En qué momento existe una voluntad de forma? ¿De qué manera encuentra el arquitecto la forma? ¿Cómo se le presenta? ¿Es el arquitecto el verdadero artífice de la obra? ¿O es en cambio un ser a la espera de la aparición? ABSTRACT Archiphany: architecture and epiphany. The revelation taking place in designing, building and living. The objective of the present dissertation is to unravel the protagonists and the scenario of this encounter. It stems from a double interest: the relationship between literature and architecture and the discovery of something incommensurable in architecture. Over the centuries, architectural theory has made a great effort in order to rationalise all aspects of this discipline. Thus, the systematization of the order and hierarchy of space, the use of more rigorous parameters on the structural analysis, the development of technical capacities and the study of functional schemes have been an inexhaustible source of architectural manifestations. Even scientific paradigms have been essential in the creation of new languages. However, aspects of difficult quantification have been relegated in this path of rationalisation. Whereas the presence of immeasurable parameters are encountered in the daily experience of the architect, architectural theory has failed to systematically integrate this knowledge. This is the driving force of this thesis. It explores, by analogy with the other arts, the concept of manifestation. It discusses how the architectural work manifests itself, making use of its autonomy, becoming the one leading the architect during the whole existence of the work: from its genesis in the designing time until the experience of the completed work in the historical time. In the present dissertation, it is assumed that reflecting on the concept of manifestation might shed light on two different moments on the way to project architecture. The architect approach to the project genesis is studied on the one hand, while in the other hand it is considered his positioning in front of the existing work, as well as his analysis (for a following synthesis) that generates an ever-open and ever-enriching spiral of knowledge. In the search for a definition of the concept of manifestation, the work of the philosopher María Zambrano and the poet José Ángel Valente are analysed. The creative moment, the nature of the poetic word, the attitude of the poet in front of his work, the knowledge and the revelation of beauty are persistent issues in their works. They create a theoretical corpus allowing to develop a sound and open poetical theory full of suggestions, accurately directed to the time of the form generation: its epiphany. The concept of manifestation is then reviewed in the activity of some modern artists that talked about the concept of epiphany –either implicitly or explicitly. Often in an intuitive way, artists have come to realize in their activity to be the depositories of a gift that is renewed in each work. Intertwined with their work and with their daily discipline, artists experience a dialogue with the work, which proves to be free and willing to manifest itself. Having stated the problem and having reviewed the world of artistic creation, we are confronted with the core of the thesis: Up to which extent and in which way is the concept of manifestation valid for architecture? Validity and evidence of this concept is sought in the activity of multiple architects. Texts, works, analysis, reviews and testimonies are investigated. From this research, a topography, an atlas of revelations of architectural manifestations arises: explicit findings, implicit witnesses or intuitions. By means of this journey going from the concept of manifestation hinted by the poetic reason to the experience of many architects, the ultimate questions risen by archiphany are meant to be answered (though partially): When does a will of form emerge? How does the architect find the form? How does it appear? Is the architect the true creator of the work? Or is he instead a being waiting for the vision?

Educación Superior de la Ingeniería Industrial en el Perú: propuesta de un modelo educativo desde las competencias

El objetivo del presente trabajo de investigación es diseñar un Modelo de Educación que permita formar ingenieros industriales en Perú que sean capaces de enfrentar los retos modernos de fuerte y sostenido crecimiento económico y social. Las necesidades que se han generado a lo largo de los últimos años llevan a identificar que una gran carencia es el poco dominio del concepto, naturaleza y gestión de un proyecto y la marcada ausencia de habilidades humanas y funcionales al momento de ejercer la profesión; entendiendo proyecto como “Un esfuerzo temporal que se lleva a cabo para crear un producto, servicio o resultado único. La naturaleza temporal de los proyectos indica un principio y un final definidos. El final se alcanza cuando se logran los objetivos del proyecto o cuando se termina el proyecto porque sus objetivos no se cumplirán o no pueden ser cumplidos, o cuando ya no existe la necesidad que dio origen al proyecto…. los proyectos pueden tener impactos sociales, económicos y ambientales susceptibles de perdurar mucho más que los propios proyectos.”1. Entonces, formularnos la hipótesis que es posible tener un modelo educativo para la Ingeniería Industrial de Perú que permita y estimule alcanzar estas características tan reclamadas por la sociedad, confiando desde el inicio que su diseño y empleo tendrá fuerte repercusión tanto en el desarrollo personal de los estudiantes, como en el social y económico, por las habilidades y condiciones que serán capaces de desplegar los egresados en sus ámbitos de acción laboral. Para lograr el objetivo se ha hecho una definición de la identidad de la universidad latinoamericana y una verificación de si es posible o no tomar modelos y experiencias de otros lugares y trasladarlos con éxito a escenarios nuevos y distintos. Luego, se han determinado las tendencias más fuertes en la formación de ingenieros industriales en los contextos más exitosos actualmente. Para definir esas habilidades tan reclamadas por el sector público y privado de la sociedad, se busca y define una codificación de competencias genéricas que permite tener un ingeniero moderno bien perfilado para las exigencias globales. Los pasos finales son determinar el Modelo para la Educación Superior de la Ingeniería Industrial de Perú desde las Competencias (MESIC) a partir de novedosos enfoques para la educación como la contextualización, la gestión del conocimiento experto y experimentado, el enfoque socioformativo y la definición de Aspectos Clave del modelo antes de iniciar una planificación curricular de ingeniería. Al final se muestra una aplicación del modelo llegando a detalles de definición de competencias muy interesantes y a la necesidad de contar con un sistema de aseguramiento de calidad de la gestión curricular. Al término de la investigación concluimos que es posible definir un modelo apropiado para formar ingenieros industriales en Perú desde las competencias, capaces de enfrentar los modernos retos locales y globales. También determinamos que el proceso no puede ser impuesto, debe pasar por un transitorio periodo de adecuación de docentes y alumnos y requiere de compromiso, pues se suele enfocar este cambio como una forma de desestimar todo lo anterior, cuando debe entenderse que son procesos complementarios, ya que los importantes logros con clases magistrales y resolución de problemas son evidentes y se trata de estilos diferentes de encarar la educación. El resultado de la imposición puede ser devastador para algunos estudiantes y frustrante para algunos docentes, consecuencias que no se desean y deben evitarse. La aplicación se realiza en una universidad del norte de Perú, la Universidad de Piura, y puede observarse en el último capítulo de este trabajo. ABSTRACT The main objective of this research is to find an Educational Modell in order to train industrial engineers in Peru who are able to face modern challenges of strong and sustained economic and social growth. Over recent years the generated needs have led to understand that a major weakness in our professionals is the poor skills in project management and the marked absence of functional and human skills when exercising the profession. This diagnose has led to formulate the hypothesis that it is possible to have an educational model for Peru Industrial Engineering that allows and encourages to achieve these features which are claimed by society. A project which we trust will have a strong impact from the beginning on both, personal development of students as well as in the social and economic conditions, considering the skills graduates will be able to deploy in their work fields. To achieve the goal first it was defined the identity of the Latin American university and verified whether it is possible or not to take models and experiences elsewhere and move successfully to new and different scenarios. Then there were determined the strongest trends in the industrial engineers training in currently successful contexts. In order to define these demanded skills by the public and private sectors of society, there are defined a set of generic skills that allows to have a modern engineer well profiled for global context. Considering these elements, a Model for Higher Education in Industrial Engineering from Peru Competence (MESIC)is proposed considering novel approaches to education such as territoriality, skilled and experienced knowledge management, socio - formative approach and set the definition of Key aspects of the model before starting a engineering curricular planning. Finally detailed records of an application of the model is shown through modern learning methodologies, development and assessment of skills and the need to have a quality assurance system for entire curriculum management. Through this research it can be concluded that it is possible to determine an appropriate model to train industrial engineers in Peru from the skills, in order to meet the modern local and global challenges. Results show that the process cannot be imposed, instead it must go through a transitional period of adaptation from teachers and students and requires commitment, focusing that this change usually is a way to dismiss the above, and is important to address that there are obvious achievements on education lectures and problem solving, and it should be understood that they are complementary processes. The result of change imposition can be devastating for some students and frustrating for some teachers, unwanted consequences and they should be avoided. The proposed model is applied at a university in northern Peru, the University of Piura, and the results can be seen in the last chapter of this work.

Early-life exposure to endotoxin alters hypothalamic–pituitary–adrenal function and predisposition to inflammation

We have investigated whether exposure to Gram-negative bacterial endotoxin in early neonatal life can alter neuroendocrine and immune regulation in adult animals. Exposure of neonatal rats to a low dose of endotoxin resulted in long-term changes in hypothalamic–pituitary–adrenal (HPA) axis activity, with elevated mean plasma corticosterone concentrations that resulted from increased corticosterone pulse frequency and pulse amplitude. In addition to this marked effect on the development of the HPA axis, neonatal endotoxin exposure had long-lasting effects on immune regulation, including increased sensitivity of lymphocytes to stress-induced suppression of proliferation and a remarkable protection from adjuvant-induced arthritis. These findings demonstrate a potent and long-term effect of neonatal exposure to inflammatory stimuli that can program major changes in the development of both neuroendocrine and immunological regulatory mechanisms.

La repetición, una interpretación psicoanalítica: Freud y Lacan

The following dissertation is framed by the psychoanalytic line of thought inaugurated by Sigmund Freud and rethought by Jacques Lacan. The starting point of this work is the notion of repetition, which finds its utmost reason in what Freud called compulsive repetition. The idea of repetition, besides being called by Lacan as one of the foundations of Psychoanalysis, articulates a series of theoretical landmarks which, in turn, constitute Psychoanalysis’ own arguments – whether linked to clinical practice or articulated around metapsychological reflection of the psychoanalytical field. This dissertation is gravitates around four specific theoretical moments: two Freudian ones and two Lacanian ones. The latter taking place during the period called “The return to Freud”, which comprises the period from 1953 to 1964. In this period, the postfreudian developments deviate from Freudian theory, as well as the psychoanalytic method, which is reviewed by poststructuralism. Altogether, the four moments being analyzed are: in Freud, the “repetition linked to the act” in 1914, and the “repetition as such” developed in Beyond the Pleasure Principle in 1920.In Lacan, the theory of “the insistence of the signifier” from 1955 and what he later named as the “failed encounter with the real” in 1964...

Trauma Treatment in Forensic Settings: Clinicians' Perspectives, Barriers to Effective Treatment, and Suggestions for Clinical Practice

Between 30% and 90% of the prison population is estimated to have survived traumatic experiences such as sexual, emotional, and physical abuse prior to incarceration (Anonymous, 1999; Fondacaro, Holt, & Powell, 1999; Messina & Grella, 2006; Pollard & Baker, 2000; Veysey, De Cou, & Prescott, 1998). Similarly, information from the Bureau of Justice Statistics (as reported in Warren, 2001) estimated that more than half of the women in state prisons have experienced past physical and sexual abuse. Thus, given the astonishing number of inmates who appear to be victims of some kind of trauma, it seems likely that those who work with these inmates (e.g., prison staff, guards, and treatment providers) will in some way encounter challenges related to the inmates' trauma history. These difficulties may appear in any number of forms including inmates' behavioral outbursts, increased emotionality, sensitivity to triggering situations, and chronic physical or mental health needs (Veysey, et al., 1998). It is also likely that these individuals with trauma histories would benefit greatly from treatment while incarcerated. This treatment could be utilized to minimize symptoms of posttraumatic stress, decrease behavioral problems, and help the inmate function more effectively in society when released from incarceration (Kokorowski & Freng, 2001; Tucker, Cosio, Meshreki, 2003). Few studies have explored the types of trauma treatment that are effective with inmate populations or made specific suggestions for clinicians working in forensic settings (Kokorowski & Freng, 2001). Essentially, there appears to be a large gap in terms of the need for trauma treatment for inmates and the lack of literature addressing what to do about it. However, clinicians across the country seem to be quietly attempting to fulfill this need for trauma treatment with incarcerated populations. They are providing this greatly needed treatment every day. in the face of enormous challenges and often without recognition or the opportunity to share their valuable work with the larger community.

Cover to be unveiled : how meaning is revealed with sheer veils in paintings by Lucas Cranach The Elder

While scholars have questioned the meaning of Lucas Cranach the Elder’s sheer veils when associated with sensual nude figures, research about sheer veils adorning women in a religious context in his paintings has not yet been developed. Through a primarily iconographical approach, I explore who dons each type of veil, and when, to better understand why the same sheer veil is worn differently by various individuals and what that could mean relative to Cranach’s body of work. These veils exhibit artistic prowess, but analysis of their placement on individual figures also reveals how Cranach’s repeated use of sheer veils in his paintings trains the eye on underlying messages, unlocking meanings of these works for Cranach and his patrons and broader themes present in sixteenth century visual culture. My paper initiates this important discussion about how sheer veils – often overlooked in Cranach’s works – are used in both religious and secular contexts.

Examining the University of Denver's Family Friendly Benefits Plans: A look at Creating More Family Friendly Benefits to Drive Employee Retention

In the latter half of the twentieth century the workforce dynamic changed when the number of women entering the workforce increased by record amounts. In direct opposition to this change was the inability of organizations to meet the needs of employees with childcare concerns. Organizations and employees alike are best served when policies, procedures, and benefits are implemented to achieve a positive work/life balance. Companies that institute benefits that are supportive to families observe decreases in turnover and increased employee retention. Employees who are offered family friendly resources have been known to stay with companies even when offered a higher salary elsewhere. Demonstrating that retention of valued employees is linked to an organizations ability to offer support for family needs.

Feature selection by multi-objective optimisation: Application to network anomaly detection by hierarchical self-organising maps

Feature selection is an important and active issue in clustering and classification problems. By choosing an adequate feature subset, a dataset dimensionality reduction is allowed, thus contributing to decreasing the classification computational complexity, and to improving the classifier performance by avoiding redundant or irrelevant features. Although feature selection can be formally defined as an optimisation problem with only one objective, that is, the classification accuracy obtained by using the selected feature subset, in recent years, some multi-objective approaches to this problem have been proposed. These either select features that not only improve the classification accuracy, but also the generalisation capability in case of supervised classifiers, or counterbalance the bias toward lower or higher numbers of features that present some methods used to validate the clustering/classification in case of unsupervised classifiers. The main contribution of this paper is a multi-objective approach for feature selection and its application to an unsupervised clustering procedure based on Growing Hierarchical Self-Organising Maps (GHSOMs) that includes a new method for unit labelling and efficient determination of the winning unit. In the network anomaly detection problem here considered, this multi-objective approach makes it possible not only to differentiate between normal and anomalous traffic but also among different anomalies. The efficiency of our proposals has been evaluated by using the well-known DARPA/NSL-KDD datasets that contain extracted features and labelled attacks from around 2 million connections. The selected feature sets computed in our experiments provide detection rates up to 99.8% with normal traffic and up to 99.6% with anomalous traffic, as well as accuracy values up to 99.12%.

Note from Samuel Gerrish to Joshua Gee, [1723 December]

This brief note from Samuel Gerrish to library keeper Joshua Gee is dated only as "Thursday Evening" and refers to payment issues related to the printing of the Library Catalogue. Gee refers to the note in his December 24, 1723, letter to President Leverett (UAIII 50.27.14 Box 1, Folder 7).

Orders for expenditures for University Hall, 15 May 1813-13 May 1814

Contains one sewn volume of work orders for the construction of University Hall in the hand of Loammi Baldwin between May 1813 and May 1814. The volume contains 46 completed work orders for supplies and services for "building the new Dining Halls and Chapel in Cambridge" payable to Hon. John Davis, Harvard treasurer. Completed work orders are noted with the name of the payee, amount paid, and the supplies or services fulfilled. Work orders 47 through 60 in the volume are unused.

Bill, 1778 May 22

Handwritten bill from John Jones to Andrew Bordman for work in June 1776. Payment acknowledged by John Jones on verso.