A conceptual model of personalized virtual learning environments

The Virtual Learning Environment (VLE) is one of the fastest growing areas in educational technology research and development. In order to achieve learning effectiveness, ideal VLEs should be able to identify learning needs and customize solutions, with or without an instructor to supplement instruction. They are called Personalized VLEs (PVLEs). In order to achieve PVLEs success, comprehensive conceptual models corresponding to PVLEs are essential. Such conceptual modeling development is important because it facilitates early detection and correction of system development errors. Therefore, in order to capture the PVLEs knowledge explicitly, this paper focuses on the development of conceptual models for PVLEs, including models of knowledge primitives in terms of learner, curriculum, and situational models, models of VLEs in general pedagogical bases, and particularly, the definition of the ontology of PVLEs on the constructivist pedagogical principle. Based on those comprehensive conceptual models, a prototyped multiagent-based PVLE has been implemented. A field experiment was conducted to investigate the learning achievements by comparing personalized and non-personalized systems. The result indicates that the PVLE we developed under our comprehensive ontology successfully provides significant learning achievements. These comprehensive models also provide a solid knowledge representation framework for PVLEs development practice, guiding the analysis, design, and development of PVLEs. (c) 2005 Elsevier Ltd. All rights reserved.

A knowledge-based system for liquid retaining structure design with blackboard architecture

Owing to the high degree of vulnerability of liquid retaining structures to corrosion problems, there are stringent requirements in its design against cracking. In this paper, a prototype knowledge-based system is developed and implemented for the design of liquid retaining structures based on the blackboard architecture. A commercially available expert system shell VISUAL RULE STUDIO working as an ActiveX Designer under the VISUAL BASIC programming environment is employed. Hybrid knowledge representation approach with production rules and procedural methods under object-oriented programming are used to represent the engineering heuristics and design knowledge of this domain. It is demonstrated that the blackboard architecture is capable of integrating different knowledge together in an effective manner. The system is tailored to give advice to users regarding preliminary design, loading specification and optimized configuration selection of this type of structure. An example of application is given to illustrate the capabilities of the prototype system in transferring knowledge on liquid retaining structure to novice engineers. (C) 2004 Elsevier Ltd. All rights reserved.

Suit keen renovator: Alternate reality design

Virtual territories and their theme parks are more akin to the physical world of real estate than they might at first appear. The trick in triggering the designer's imagination, is to find a 'nice renovator' (cottage/ house) at a low price, with loads of potential, and by doing it on the cheap to add character, and engage the imagination. Here the designer can construct changes from an imagined space. Vision is more important than how the actual place presents.This work describes a case study involving undergraduate students in the Creative Industries who needed a place to explore, so as to create their own visions and projects. The place had to inspire, trigger engagement, and their imaginations. At the same time it was important that the place did not coerce activity, or distract from the task by confusing tools with task, or architectural navigation with conceptual skills.The solution was an alternate reality.

Virtual training environments to improve train driver's crisis decision making

This paper reports on a current research project in which virtual reality simulators are being investigated as a means of simulating hazardous Rail work conditions in order to allow train drivers to practice decision-making under stress. When working under high stress conditions train drivers need to move beyond procedural responses into a response activated through their own problem-solving and decision-making skills. This study focuses on the use of stress inoculation training which aims to build driver’s confidence in the use of new decision-making skills by being repeatedly required to respond to hazardous driving conditions. In particular, the study makes use of a train cab driving simulator to reproduce potentially stress inducing real-world scenarios. Initial pilot research has been undertaken in which drivers have experienced the training simulation and subsequently completed surveys on the level of immersion experienced. Concurrently drivers have also participated in a velocity perception experiment designed to objectively measure the fidelity of the virtual training environment. Baseline data, against which decision-making skills post training will be measured, is being gathered via cognitive task analysis designed to identify primary decision requirements for specific rail events. While considerable efforts have been invested in improving Virtual Reality technology, little is known about how to best use this technology for training personnel to respond to workplace conditions in the Rail Industry. To enable the best use of simulators for training in the Rail context the project aims to identify those factors within virtual reality that support required learning outcomes and use this information to design training simulations that reliably and safely train staff in required workplace accident response skills.

Comportamento sotto sisma di strutture rigide o deformabili: due casi di studio estremi

In Italia molti edifici sono stati costruiti senza tenere in considerazione l'azione sismica. La necessità di adeguare tali edifici in accordo con la normativa italiana vigente è stato il motivo scatenante di questa ricerca. Per l'adeguamento sismico, vengono qui proposti differenti approcci in base al tipo di struttura e, in particolare, in base alla loro deformabilità. Per le strutture flessibili come le scaffalature di acciaio adibite alla stagionatura del Parmigiano Reggiano, sono stati utilizzati dispositivi passivi di dissipazione energetica. Sono state condotte analisi di sensitività per determinare il coefficiente di smorzamento in grado di minimizzare lo stato tensionale nelle sezioni di interesse. I risultati delle analisi mostrano l'efficacia delle soluzioni proposte e potrebbero rappresentare un punto di partenza per la definizione di possibili contromisure standar per l'adeguamento sismico. Per le strutture rigide, come i ponti in muratura, sono stati definiti alcuni criteri per la modellazione e la verifica delle sezioni di interesse, utilizzando modelli semplificati ma dall'efficacia comprovata come termine di paragone.

Measuring performance of virtual learning environment system in higher education

Purpose – The purpose of this paper is to measure the performance of commercial virtual learning environment (VLE) systems, which helps the decision makers to select the appropriate system for their institutions. Design/methodology/approach – This paper develops an integrated multiple criteria decision making approach, which combines the analytic hierarchy process (AHP) and quality function deployment (QFD), to evaluate and select the best system. The evaluating criteria are derived from the requirements of those who use the system. A case study is provided to demonstrate how the integrated approach works. Findings – The major advantage of the integrated approach is that the evaluating criteria are of interest to the stakeholders. This ensures that the selected system will achieve the requirements and satisfy the stakeholders most. Another advantage is that the approach can guarantee the benchmarking to be consistent and reliable. From the case study, it is proved that the performance of a VLE system being used at the university is the best. Therefore, the university should continue to run the system in order to support and facilitate both teaching and learning. Originality/value – It is believed that there is no study that measures the performance of VLE systems, and thus decision makers may have difficulties in system evaluation and selection for their institutions.

Design, synthesis and development of PDE5 inhibitors

This research project is concerned with the design, synthesis and development of new phosphodiesterase 5 (PDE5) inhibitors with improved selectivities and lower toxicities. Two series of a 5 member and a 6 member ring fused heterocyclic compounds were designed, and synthesized. By alteration of starting materials and fragments, two virtual libraries, each is consisted of close to hundred compounds, were obtained successfully. The screening of sexual stimulation activity with rabbits demonstrated both groups of compounds were able to stimulate rabbit penile erection significantly. The following toxicity studies revealed 2-(substituted-sulfonylphenyl)-imidazo [1,5-a]-1,3,5-triazine-4-(3H)-one group possessed an unacceptable toxicity with oral LD50 about 200mg/kg; while 2-(substituted-sulfonylphenyl)-pyrrolo[2,3-d]pyrimidin-4-one group showed an acceptable toxicity with oral LD50 over 2000mg/kg. The continued bioactivity studies showed yonkenafil, the representative of 2-(substituted-sulfonylphenyl)-pyrrolo[2,3-d]pyrimidin-4-one group, has a better selectivity towards PDE5 and PDE6 than sildenafil and a better overall profile of sexual stimulation on animals than sildenafil. Chronic toxicity studies of yonkenafil further confirmed yonkenafil did not cause any serious side effect and damage on animal models and most actions were explainable. Based on evidences of the above studies, yonkenafil were recommended to enter clinical trials by the regulation authority of China, SFDA. Currently yonkenafil has been through the Phase I clinical trials and ready to progress into Phase II. Hopefully, yonkenafil will provide an alternative to the ED patients in the future.

Design Standardized Web-Components for e-Learning

In this paper a flexible approach to design LMS with QTI Ready component based on the e-Learning standards AICC and IMS QTI is described. This system and component permits a dynamic learning and assessment process. QTI Ready component can provide these facilities to other real world virtual learning management system.

Digital Art and Design

The desire to create unique things and give free rain to one's imagination served as a powerful impetus to the development of digital art and design software. The commoner was the use of computers the wider variety of professional software was developed. Nowadays the creators and computer designers are receiving more and more new and advanced programs that allow their ideas becoming virtual reality. This research paper looks at the history of the development of graphic editors from the simplest to the most modern and advanced. This brief survey includes the history of different graphic editors’ creation, their features and abilities. This paper highlights the two basic branches of graphic editors – these that are in free use and commercial graphic editors design software. The researcher selected the most powerful and influential graphic editors design software brands like Paint.NET and GIMP among free software and commercial Adobe Photoshop. This paper also dwells upon the way digital art transferred from the exclusively professional business into the hobby for ordinary users. This research paper bears implications for those who are interested in features and potentiality of most popular graphic editors design software.

An Open Virtual World for Professional Development

The paper presents a study that focuses on the issue of sup-porting educational experts to choose the right combination of educational methodology and technology tools when designing training and learning programs. It is based on research in the field of adaptive intelligent e-learning systems. The object of study is the professional growth of teachers in technology and in particular that part of their qualification which is achieved by organizing targeted training of teachers. The article presents the process of creating and testing a system to support the decision on the design of training for teachers, leading to more effective implementation of technology in education and integration in diverse educational contexts. ACM Computing Classification System (1998): H.4.2, I.2.1, I.2, I.2.4, F.4.1.

Virtual Reconstruction of the Ancient Russian Fortress Koporye

One of the major strategic tasks in Russia’s northwest of the past centuries was the defense of the country’s territories from enemy incursions coming from the West. In order to solve this task, a robust shield in the form of a system of fortresses was created between the 13th and 15th centuries. The system included such fortresses as Koporye, Yam, Korela, Oreshek, and others. In our age, these monuments have become an essential part of Russia’s historic and cultural heritage and an important element of the tourism cluster “The Silver Ring of Russia.” The Centre of Design and Multimedia at St. Petersburg National Research University of Information Technologies, Mechanics and Optics, jointly with the Department of History and the Faculty of Arts at St. Petersburg State University, working under a three-year grant from the Russian Foundation for Humanities Research (#12-01-12041), is implementing a multimedia information system “Ancient Fortresses of Russia’s Northwest”. Historically accurate virtual reconstruction of several fortresses as they existed during certain historic periods, done in such a way as to allow the future creation of virtual tours of these sites, has become the focus of this project’s research. In the present paper, we describe the main phases and results of virtual reconstruction of the best-preserved fortress, Koporye.

Towards asphalt mixture morphology evaluation with the virtual specimen approach

The morphology of asphalt mixture can be defined as a set of parameters describing the geometrical characteristics of its constituent materials, their relative proportions as well as spatial arrangement in the mixture. The present study is carried out to investigate the effect of the morphology on its meso- and macro-mechanical response. An analysis approach is used for the meso-structural characterisation based on the X-ray computed tomography (CT) data. Image processing techniques are used to systematically vary the internal structure to obtain different morphology structures. A morphology framework is used to characterise the average mastic coating thickness around the main load carrying structure in the structures. The uniaxial tension simulation shows that the mixtures with the lowest coating thickness exhibit better inter-particle interaction with more continuous load distribution chains between adjacent aggregate particles, less stress concentrations and less strain localisation in the mastic phase.

A comparison of the effects of classroom and Multi-User Virtual Environments on the perceived speaking anxiety of adult post-secondary English Language Learners

The population of English Language Learners (ELLs) globally has been increasing substantially every year. In the United States alone, adult ELLs are the fastest growing portion of learners in adult education programs (Yang, 2005). There is a significant need to improve the teaching of English to ELLs in the United States and other English-speaking dominant countries. However, for many ELLs, speaking, especially to Native English Speakers (NESs), causes considerable language anxiety, which in turn plays a vital role in hindering their language development and academic progress (Pichette, 2009; Woodrow, 2006). ^ Task-based Language Teaching (TBLT), such as simulation activities, has long been viewed as an effective approach for second-language development. The current advances in technology and rapid emergence of Multi-User Virtual Environments (MUVEs) have provided an opportunity for educators to consider conducting simulations online for ELLs to practice speaking English to NESs. Yet to date, empirical research on the effects of MUVEs on ELLs' language development and speaking is limited (Garcia-Ruiz, Edwards, & Aquino-Santos, 2007). ^ This study used a true experimental treatment control group repeated measures design to compare the perceived speaking anxiety levels (as measured by an anxiety scale administered per simulation activity) of 11 ELLs (5 in the control group, 6 in the experimental group) when speaking to Native English Speakers (NESs) during 10 simulation activities. Simulations in the control group were done face-to-face, while those in the experimental group were done in the MUVE of Second Life. ^ The results of the repeated measures ANOVA revealed after the Huynh-Feldt epsilon correction, demonstrated for both groups a significant decrease in anxiety levels over time from the first simulation to the tenth and final simulation. When comparing the two groups, the results revealed a statistically significant difference, with the experimental group demonstrating a greater anxiety reduction. These results suggests that language instructors should consider including face-to-face and MUVE simulations with ELLs paired with NESs as part of their language instruction. Future investigations should investigate the use of other multi-user virtual environments and/or measure other dimensions of the ELL/NES interactions.^