On-line determination of residual collector concentration in flotation process

Valuable minerals can be recovered by using froth flotation. This is a widely used separation technique in mineral processing. In a flotation cell hydrophobic particles attach on air bubbles dispersed in the slurry and rise on the top of the cell. Valuable particles are made hydrophobic by adding collector chemicals in the slurry. With the help of a frother reagent a stable froth forms on the top of the cell and the froth with valuable minerals, i.e. the concentrate, can be removed for further processing. Normally the collector is dosed on the basis of the feed rate of the flotation circuit and the head grade of the valuable metal. However, also the mineral composition of the ore affects the consumption of the collector, i.e. how much is adsorbed on the mineral surfaces. Therefore it is worth monitoring the residual collector concentration in the flotation tailings. Excess usage of collector causes unnecessary costs and may even disturb the process. In the literature part of the Master’s thesis the basics of flotation process and collector chemicals are introduced. Capillary electrophoresis (CE), an analytical technique suitable for detecting collector chemicals, is also reviewed. In the experimental part of the thesis the development of an on-line CE method for monitoring the concentration of collector chemicals in a flotation process and the results of a measurement campaign are presented. It was possible to determine the quality and quantity of collector chemicals in nickel flotation tailings at a concentrator plant with the developed on-line CE method. Sodium ethyl xanthate and sodium isopropyl xanthate residuals were found in the tailings and slight correlation between the measured concentrations and the dosage amounts could be seen.

Selectivity of clomazone and S-metolachlor applied after cassava pruning

The objective of this work was to evaluate the selectivity of clomazone in two formulations and S-metolachlor applied on shoots of different sizes after pruning of 'Baianinha' cassava. The experiment was arranged in a randomized block design in a factorial 5 x 2 (5 treatments x 2 sizes of shoots after pruning - 10 and 33 cm) with four replications. The herbicides evaluated were: clomazone (encapsulated suspension - 900 g h-1), clomazone (encapsulated suspension - 1,080 g ha-1), clomazone (emulsifiable concentrate 900 g ha-1), S-metolachlor (1,920 g ha-1) and an untreated control. During the experiment, all plots were kept free of weed interference by hand weeding. It was concluded that both the formulations of clomazone and S-metolachlor were selective when applied on both the shoot sizes evaluated. However, the application of S-metolachlor on 33 cm shoots gave higher selectivity to 'Baianinha' cassava plants.

PDM system functions and utilizations analysis to improve efficiency of sheet metal product design and manufacturing

This study will concentrate on Product Data Management (PDM) systems, and sheet metal design features and classification. In this thesis, PDM is seen as an individual system which handles all product-related data and information. The meaning of relevant data is to take the manufacturing process further with fewer errors. The features of sheet metals are giving more information and value to the designed models. The possibility of implementing PDM and sheet metal features recognition are the core of this study. Their integration should make the design process faster and manufacturing-friendly products easier to design. The triangulation method is the basis for this research. The sections of this triangle are: scientific literature review, interview using the Delphi method and the author’s experience and observations. The main key findings of this study are: (1) the area of focus in triangle (the triangle of three different point of views: business, information exchange and technical) depends on the person’s background and their role in the company, (2) the classification in the PDM system (and also in the CAD system) should be done using the materials, tools and machines that are in use in the company and (3) the design process has to be more effective because of the increase of industrial production, sheet metal blank production and the designer’s time spent on actual design and (4) because Design For Manufacture (DFM) integration can be done with CAD-programs, DFM integration with the PDM system should also be possible.

Elinkaarihankkeen rakennusliikeriskit

Tiivistelmä: Elinkaaren palvelumallit ovat suosittuja julkisten palveluiden hankintamuotoja Iso-Britanniassa. PPP–malli on yksi monista julkisten palvelujen kumppanuusmalleista, josta on tullut joissakin kunnissa yhä suositumpi hankintamalli myös Suomessa. Tämä on seurausta kuntien tiukasta taloustilanteesta, jossa PPP–hankkeen katsotaan mahdollistavan julkisen sektorin investoinnit joutumatta leikkaamaan muita pakollisia hankintoja. Kuitenkin koko elinkaaren kattavat palvelutarjonnan hankintamallit ovat vielä melko uusia malleja ja meillä on tarve löytää toimivia sopimusmalleja ja käytäntöjä, jotta hankkeista saadaan rakennusliikettä kiinnostavia liiketoimintamalleja. Ulkomailla elinkaarihankkeista on tehty monia tutkimuksia ja konsultit ovat kääntäneet niitä omiin tarkoituksiinsa sopiviksi. Kuitenkin Suomen lainsäädäntö on erilainen julkisten palveluiden tuottamisessa, erityisesti lakisääteisissä terveydenhuoltopalveluissa, vesi- ja jätevesihuollossa, vankeinhoidossa, ja niin edelleen. Tästä näkökulmasta ulkomailla tehdyt tutkimukset eivät sellaisenaan sovi Suomeen käytettäviksi. Esimerkiksi tutkimuksissa esitetään, että elinkaarihankkeet tuottavat pitkän aikavälin kassavirtaan, mutta tämä etu koskee vain rahoittaja ja kiinteistöpalvelu yrityksiä - ei rakennusyritystä. Tutkimuksissa mainitaan myös muista elinkaarihankkeiden mahdollisuuksista, jotka jäävät kuitenkin rakennusliikkeen näkökulmasta epäselviksi. Perinteisiin rakennuttamisen malleihin verrattuna elinkaarihankkeiden sopimusmenettelyt ovat monimutkaisempia sekä aikaa vievempiä ja sopijaosapuolten yhteistyö elinkaarihankkeissa on välttämätöntä. Käytännössä elinkaarihankkeiden riskienjako nähdään julkisen sektorin ja yksityisen sektorin välillä yksipuoliseksi. Jotta elinkaarimalli yleistyisi Suomessa, niin elinkaarisopimuksen riskienjaosta on tehtävä tasapuolinen ja käyttäjä pitää saada myös riskejä kantamaan. Tässä työssä keskitytään arvioimaan elinkaarimallien keskeisiä menestystekijöitä ja riskitekijöitä ja löytää mahdollisia tapoja tehdä hankintaprosessista helppoa ja sujuvaa. Samalla yritetään selvittää, miten elinkaarihankkeesta saadaan rakennusliikkeen kannalta menestyvää liiketoimintaa. Johtopäätökset perustuvat aikaisempiin tutkimuksiin ja empiiriseen tapaustutkimukseen. Työssä arvioidaan niitä seikkoja, jotka vaikuttavat yksityisen sektorin tarjouspäätökseen. Arvioinnissa erotetaan toisistaan kolme erillistä riskitekijää; tarjouksen tekemisen riskit, rakennushankkeen riskit ja elinkaaren aikaiset riskit. Työssä todetaan, että aikaisemmat tutkimukset ovat riittämättömiä rakennusliikkeen riskien arvioimiseen.

Subshifts with Simple Cellular Automata

A subshift is a set of in nite one- or two-way sequences over a xed nite set, de ned by a set of forbidden patterns. In this thesis, we study subshifts in the topological setting, where the natural morphisms between them are ones de ned by a (spatially uniform) local rule. Endomorphisms of subshifts are called cellular automata, and we call the set of cellular automata on a subshift its endomorphism monoid. It is known that the set of all sequences (the full shift) allows cellular automata with complex dynamical and computational properties. We are interested in subshifts that do not support such cellular automata. In particular, we study countable subshifts, minimal subshifts and subshifts with additional universal algebraic structure that cellular automata need to respect, and investigate certain criteria of `simplicity' of the endomorphism monoid, for each of them. In the case of countable subshifts, we concentrate on countable so c shifts, that is, countable subshifts de ned by a nite state automaton. We develop some general tools for studying cellular automata on such subshifts, and show that nilpotency and periodicity of cellular automata are decidable properties, and positive expansivity is impossible. Nevertheless, we also prove various undecidability results, by simulating counter machines with cellular automata. We prove that minimal subshifts generated by primitive Pisot substitutions only support virtually cyclic automorphism groups, and give an example of a Toeplitz subshift whose automorphism group is not nitely generated. In the algebraic setting, we study the centralizers of CA, and group and lattice homomorphic CA. In particular, we obtain results about centralizers of symbol permutations and bipermutive CA, and their connections with group structures.

Distribution of 131I-labeled Bothrops erythromelas venom in mice

Bothrops erythromelas is responsible for many snake bites in northeastern Brazil. In the present study we determined the in vivo distribution of the venom following its subcutaneous injection into mice. B. erythromelas venom and albumin were labeled individually with 131I by the chloramine T method, and separated in a Sephacryl® S-200 column. The efficiency of labeling was 68%. Male Swiss mice (40-45 g), which had been provided with drinking water containing 0.05% KI over a period of 10 days prior to the experiment, were inoculated dorsally (sc) with 0.3 ml (2.35 x 105 cpm/mouse) of 131I-venom (N = 42), 131I-albumin or 131I (controls, N = 28 each). Thirty minutes and 1, 3, 6, 12, 18 and 24 h after inoculation, the animals were perfused with 0.85% NaCl and skin and various organs were collected in order to determine radioactivity content. There was a high rate of venom absorption in the skin (51%) within the first 30 min compared to albumin (20.1%) and free iodine (8.2%). Up to the third hour after injection there was a tendency for venom and albumin to concentrate in the stomach (3rd h), small intestine (3rd h) and large intestine (6th h). Both control groups had more radioactivity in the digestive tract, especially in the stomach, but these levels decreased essentially to baseline by 12-18 h postinjection. In the kidneys, the distribution profiles of venom, albumin and iodine were similar. Counts at 30 min postinjection were low in all three groups (1.37, 1.86 and 0.77, respectively), and diminished to essentially 0% by 12-18 h. Albumin tended to concentrate in muscle until the 3rd h postinjection (1.98%). There was a low binding of labeled venom in the liver (<0.54%), thyroid (<0.11%) and lungs (<0.08%), and no iodinated venom was detected in brain, heart, diaphragm, spleen or bladder. The low venom binding observed in most internal organs, comparable to that of albumin, suggests that B. erythromelas venom does not specifically target most internal organs. That is, the systemic effects of envenomation are mainly due to an indirect action

Concentration of hydrogen peroxide and improving its energy efficiency

Distillation is a unit operation of process industry, which is used to separate a liquid mixture into two or more products and to concentrate liquid mixtures. A drawback of the distillation is its high energy consumption. An increase in energy and raw material prices has led to seeking ways to improve the energy efficiency of distillation. In this Master's Thesis, these ways are studied in connection with the concentration of hydrogen peroxide at the Solvay Voikkaa Plant. The aim of this thesis is to improve the energy efficiency of the concentration of the Voikkaa Plant. The work includes a review of hydrogen peroxide and its manufacturing. In addition, the fundamentals of distillation and its energy efficiency are reviewed. An energy analysis of the concentration unit of Solvay Voikkaa Plant is presented in the process development study part. It consists of the current and past information of energy and utility consumptions, balances, and costs. After that, the potential ways to improve the energy efficiency of the distillation unit at the factory are considered and their feasibility is evaluated technically and economically. Finally, proposals to improve the energy efficiency are suggested. Advanced process control, heat integration and energy efficient equipment are the most potential ways to carry out the energy efficient improvements of the concentration at the Solvay Voikkaa factory. Optimization of the reflux flow and the temperatures of the overhead condensers can offer immediate savings in the energy and utility costs without investments. Replacing the steam ejector system with a vacuum pump would result in savings of tens of thousands of euros per year. The heat pump solutions, such as utilizing a mechanical vapor recompression or thermal vapor recompression, are not feasible due to the high investment costs and long pay back times.

Production, isolation and characterization of bioactive peptides with antihypertensive properties from rapeseed and potato protein

Consumers’ increasing awareness of healthiness and sustainability of food presents a great challenge to food industry to develop healthier, biologically active and sustainable food products. Bioactive peptides derived from food proteins are known to possess various biological activities. Among the activities, the most widely studied are antioxidant activities and angiotensin I converting enzyme (ACE) inhibitory activity related to blood pressure regulation and antihypertensive effects. Meanwhile, vast amounts of byproducts with high protein content are produced in food industry, for example potato and rapeseed industries. The utilization of these by-products could be enhanced by using them as a raw material for bioactive peptides. The objective of the present study was to investigate the production of bioactive peptides with ACE inhibitory and antioxidant properties from rapeseed and potato proteins. Enzymatic hydrolysis and fermentation were utilized for peptide production, ultrafiltration and solid-phase extraction were used to concentrate the active peptides, the peptides were fractionated with liquid chromatographic processes, and the peptides with the highest ACE inhibitory capacities were putified and analyzed with Maldi-Tof/Tof to identify the active peptide sequences. The bioavailability of the ACE inhibitory peptides was elucidated with an in vitro digestion model and the antihypertensive effects in vivo of rapeseed peptide concentrates were investigated with a preventive premise in 2K1C rats. The results showed that rapeseed and potato proteins are rich sources of ACE inhibitory and antioxidant peptides. Enzymatic hydrolysis released the peptides effectively whereas fermentation produced lower activities.The native enzymes of potato were also able to release ACE inhibitory peptides from potato proteins without the addition of exogenous enzymes. The rapeseed peptide concentrate was capable of preventing the development of hypertension in vivo in 2K1C rats, but the quality of rapeseed meal used as raw material was found to affect considerably the antihypertensive effects and the composition of the peptide fraction.

Ravinnepitoisen teollisen jäteveden tuotteistaminen

Tässä työssä selvitettiin ravinnepitoisen jäteveden väkevöintiä erityisesti ammoniumtypen ja orgaanisten happojen osalta. Konsentrointiin käytettiin pääasiassa käänteisosmoosia sekä haihdutusta, mutta myös nanosuodatusta tutkittiin. Jätevesi oli Honkajoki Oy:n lauhdevettä. Kirjallisuusosassa esiteltiin Honkajoki Oy:n toimintaa, membraanierotus-prosesseja, lihantuotannossa syntyvän jätteen ominaisuuksia sekä sen puhdistamista. Keskeisimmät suodatukset tehtiin DOW FILMTEC SW30HR -membraanilla, ja käytetty laitteisto oli DSS LabStak M20. Suodatuksia tehtiin eri pH-olosuhteissa typen ja orgaanisten happojen erottumisen kannalta optimaalisten olosuhteiden löytämiseksi. Lisäksi tutkittiin, kuinka puhtaaksi permeaatti voidaan saada uudelleensuodatuksen avulla. Työssä käytettiin myös haihdutusta lauhteen väkevöintiin. Ammoniumtypen konsentroituminen suodatuksissa oli tehokkainta pH:n ollessa 7 tai sen alle. Kaksivaiheisella suodatuksella permeaatin laatu alitti selvästi Karvianjokeen laskettaville jätevesille asetetut laatu- ja kuormitusrajat. Yhdistämällä suodatus- ja haihdutusprosessit, pystyttiin valmistamaan liuosta, jonka ammoniumtyppipitoisuus oli noin 7,6 %. Tuolloin suodatus tehtiin pH 7:ssä ja haihdutus pH 3:ssa rotavaporilla 26 mbar paineessa ja 50 °C lämpötilassa. Syöttöliuoksen tilavuuden alenema oli noin 65-kertainen. Haihdutuksessa muodostuneessa lauhteessa oli paljon orgaanisia happoja ja käytännössä ei lainkaan ammoniumtyppeä. Tuotejakeita saatiin siten kaksi kappaletta: ammoniumtyppijae ja orgaanisia happoja sisältävä jae.

IT:n ja liiketoiminnan välisen palvelutason hallinta ulkoistetussa IT- palvelumallissa

Knowledge and competence are in important role in today’s demanding business environment where hard competition forces everyone to specialize and concentrate more to core competencies. Companies are outsourcing services, making processes more efficient and utilizing better their staff and available knowledge capital. It requires good strategic planning, process measuring and management and motivated staff, who is willing to continuously learn and absorb new information. This Thesis examines almost total IT service outsourcing to international service provider in situation where company previously had own IT. Work contains problematic situations during the change and suggestions how to improve services and understand the new model in a better way.

Taxonomy and Species Richness of Amazonian Pimplinae and Rhyssinae (hymenoptera: ichneumonidae)

The Amazonian region, the biggest rain forest of our planet, is known for its extraordinary biodiversity. Most of this diversity is still unexplored and new species of different taxa are regularly found there. In this region, as in most areas of the world, insects are some of the most abundant organisms. Therefore, studying this group is important to promote the conservation of these highly biodiverse ecosystems of the planet. Among insects, parasitoid wasps are especially interesting because they have potential for use as biodiversity indicators and biological control agents in agriculture and forestry. The parasitoid wasp family Ichneumonidae is one of the most species rich groups among the kingdom Animalia. This group is still poorly known in many areas of the world; the Amazonian region is a clear example of this situation. Ichneumonids have been thought to be species poor in Amazonia and other tropical areas. However, recent studies are suggesting that parasitoid wasps may be quite abundant in Amazonia and possibly in most tropical areas of the world. The aim of my doctoral thesis is to study the species richness and taxonomy of two of the best known ichneumonid subfamilies in the Neotropical region, Pimplinae and Rhyssinae. To do this I conducted two extensive sampling programs in the Peruvian Amazonia. I examined also a large number of Neotropical ichneumonids deposited to different natural history museums. According to the results of my thesis, the species richness of these parasitoids in the Amazonian region is considerably higher than previously reported. In my research, I firstly further develop the taxonomy of these parasitoids by describing many new species and reporting several new faunistic records (I, II, III). In this first part I focus on two genera (Xanthopimpla and Epirhyssa) which were thought to be rather species poor. My thesis demonstrates that these groups are actually rather species rich in the Amazonian region. Secondly, I concentrate on the species richness of these parasitoids in a global comparison showing that the Neotropical region and especially the Peruvian Amazonia is one of the most species rich areas of Pimpliformes ichneumonids (V). Furthermore, I demonstrate that with the data available to date no clear latitudinal gradient in species richness is visible. Thirdly, increasing the macroecological knowledge of these parasitoids I show that some previously unreported ichneumonid subfamilies are present in the Amazonian region (IV). These new insights and the results of the global comparison of ichneumonid inventories suggest that the previous belief of low diversity in the tropics is most likely related to a lack of sampling effort in the region. Overall, my research increases the knowledge of Neotropical ichneumonids highlighting the importance of Peruvian Amazonia as one of the diversity hotspots of parasitoid wasps.

Value based pricing and marketing of marine engines

Objective of the thesis is to create a value based pricing model for marine engines and study the feasibility of implementing such model in the sales organization of a specific segment in the case company’s marine division. Different pricing strategies, concept of “value”, and how perceptions of value can be influenced through value based marketing are presented as theoretical background for the value based pricing model. Forbis and Mehta’s Economic Value to Customer (EVC) was selected as framework to create the value based pricing model for marine engines. The EVC model is based on calculating and comparing life-cycle costs of the reference product and competing products, thus showing the quantifiable value of the company’s own product compared to competition. In the applied part of the thesis, the components of the EVC model are identified for a marine diesel engine, the components are explained, and an example calculation created in Excel is presented. When examining the possibilities to implement in practice a value based pricing strategy based on the EVC model, it was found that the lack of precise information on competing products is the single biggest obstacle to use EVC exactly as presented in the literature. It was also found that sometimes necessary communication channels are missing and that there is simply a lack of interest from some clients and product end-users part to spend time on studying the life-cycle costs of the product. Information on the company’s own products is however sufficient and the sales force is capable to communicate to sufficiently high executive levels in the client organizations. Therefore it is suggested to focus on quantifying and communicating the company’s own value proposition. The dynamic nature of the business environment (variance in applications in which engines are installed, different clients, competition, end-clients etc.) means also that each project should be created its own EVC calculation. This is demanding in terms of resources needed, thus it is suggested to concentrate on selected projects and buyers, and to clients where the necessary communication channels to right levels in the customer organization are available. Finally, it should be highlighted that as literature suggests, implementing a value based pricing strategy is not possible unless the whole business approach is value based.

The modest but growing Brazilian presence in psychiatric, psychobiological and mental health research: assessment of the 1998-2002 period

The objective of the present survey was to assess the Brazilian scientific production in psychiatry, psychobiology, and mental health during the 1998-2002 period. The universities' graduate programs concentrate the vast majority of the scientific production in Brazil. We assessed the annual reports from the graduate programs to the Brazilian Ministry of Education concerning master's and doctoral theses and the articles published in journals indexed by the Institute of Scientific Information (ISI). There are nine Master's and Doctoral graduate programs dedicated to research in psychiatry, neuropsychiatry, psychobiology, and mental health in the country, seven being located in southern states. During the 5-year period, from 1998 to 2002, 186 students received their doctorate degree (37/year). The programs published 637 articles in journals indexed by ISI, the majority of them in journals with an impact factor higher than 2. The research advisors' productivity varied among graduate programs, ranging from 0.6 to 2.0 articles per year in ISI-indexed journals. Despite the substantial barriers faced by the Brazilian scientific community (mainly financial and writing difficulties), Brazil's scientific mental health production is on the rise. The number of articles published in ISI-indexed journals has doubled without a significant increase in the number of graduate theses, suggesting that there was an improvement in both the quality of the scientific production and the productivity of the graduate programs. Based on these data, it is reasonable to predict a tendency to an increase in production over the next few years.

Tietojohtamista tukevan toiminnanohjausjärjestelmän vaatimuksia erityistoimialalla: tapaustutkimus eläinterveydenhuollon toimialalla

Veterinary Health Services are following in many areas the practices and medical direction of human medicine and health services. They are reaching for improved efficiency, quality and precision. Competitive position may be improved and productivity increased by specializing and focusing efforts at the practice. This thesis focuses in small animal practices and their needs for ERP (Enterprise Resource Planning) systems in Germany. As a result requirements for ERP solution supporting knowledge management in the small animal practice is presented. Veterinary Health Services is knowledge-intensive business, where written information and tacit knowledge is increasingly bound together with deepening expertise and specialization. Veterinarian is even legally obliged to develop and maintain her professional skills. The current ERP solutions concentrate in the treatment process of veterinary practice. Customer relationship management is left aside. As the competitive situation is getting tighter in veterinary services also the customer relationship management needs to get into the focus and interest to the wider network support in knowledge sharing should take steps forward. Taking into account the requirement of continuous development of professional skills ERP system at the veterinary practice should also be seen as knowledge management tool. It should provide the possibility to create, store, share and use knowledge. The study is conducted first by studying the AS-IS situation of ERP use and market in veterinary health services and then drawing the requirements of TO-BE situation by studying literature and the results of semi qualitative study conducted for German veterinary practices. A group of veterinarians were interviewed, market and network analysis was done and the understanding of market was deepened in two veterinary conferences in Germany. This theses work is requested by Finnish software company Finnish Net Solutions, which is the leading supplier of Veterinary Practice Management software in Finland. The company plans to expand to European market with Cloud based service. Target of the theses is to create understanding of the requirements of German veterinary market to develop ERP solution supporting Knowledge Management in Veterinary Practice.

Yksilö ja ympäristö: Maalari Frans Lindin (1903–1988) elinikäinen ympäristösuhde muistitietohaastattelujen ja maisemamaalausten valossa

Tekijänoikeudellisten syiden vuoksi teoksen kokotekstissä olevien kuvien teknistä laatua on jouduttu heikentämään. ---- Tutkin yhden työläisen, maalari Frans Lindin (1903–1988) ympäristösuhdetta lapsuudesta viimeisiin elinvuosiin asti eli kirjoitan hänen ympäristöelämäkertaansa. Tarkastelen hänen suhdettaan luontoon ja kulttuuriympäristöön hänen vapaa-aikanaan. Tutkimukseen kuuluu johdanto-osan lisäksi yksi suomenkielinen ja neljä eng¬lanninkielistä artikkelia. Tutkin erityisesti Lindin paikkoja ja ympäristökokemuksia; tarkastelen hänen kotejaan ja muita tärkeitä paikkojaan; käsittelen hänen suhdettaan veteen ja vesistöihin; selvitän hänen maalausharrastustaan ja ympäristökokemustensa ulottuvuuksia sekä osoitan muistitiedon tärkeyden kokemusten tulkinnassa. Keskeiset lähteeni ovat vuosina 1985–2004 tekemäni Lindin ja 15 muun henkilön muistitietohaastattelut sekä puolensataa Lindin maalaamaa maisemaa, jotka dokumentoivat luontoa, yksityistaloja, julkisia rakennuksia ja kaupunkinäkymiä. Lisäksi käytän asiakirjoja, sanomalehtiaineistoa ja historiateoksia sekä omia havaintojani. Lähestyn Lindin ympäristösuhdetta kulttuurihistoriallisen ympäristötutkimuksen, henkilöhistorian ja muistitietohistorian näkökulmasta. Ympäristösuhde tarkoittaa kaikkea, mitä ihminen tekee ympäristössään, ympäristölleen ja ympäristönsä vaikutuksesta tai innoittamana. Se on sosiaalinen, historiallinen ja kulttuurinen ilmiö, joka kehittyy varhaislapsuudesta lähtien kodista käsin ja muotoutuu elämän loppuun asti. Lindin ympäristösuhde kehittyi eri ihmisten vaikutuksesta, eri aikoina ja eri toiminnoissa ja konkretisoitui paikoissa, jotka olivat koettuja, muistettuja ja kerrottuja. Ne olivat myös lyhyt- tai pitkäaikaisia tai ainut-kertaisia, aktiivisia tai passiivisia, nykyisiä tai menneitä. Laatimani Lindin paikkojen luokituksen perustalta voidaan tutkia muidenkin ihmisten paikkasuhdetta. Lindin ympäristösuhteen moniulotteisuus ja rikkaus ilmeni sekä haastatteluissa että maisemamaalauksissa. Hänen ympäristökokemuksensa olivat arkisia, mutta niissä ilmenivät myös tunteiden, tiedon, nostalgian, edistyksen, omistamisen ja liikkumisen ulottuvuudet. Tutkimukseni antaa lähtökohdan kenen tahansa, varsinkin elossa olevan henkilön, ympäristösuhteen tutkimiselle.