Influence of the grinding wheel's dive speed on the damage of rectified hardened steels

The world tendency is the increase of the productivity and the production of pieces more and more sophisticated, with high degree of geometric and dimensional tolerances, with good surface finish and low cost. Rectification is responsible for the final finish in the machining process of a material. However, damages generated in this production phase affect all the resources used in the previous processes. Great part of the problems happennig in the rectification process is due to the enormous temperature generated in this activity because of the machining conditions. The dive speed, which is directly related to the productivity, is considered responsible for the damages that occur during rectification, limiting its values to those that do not cause such damages. In this work, through the variation of the dive speed in the process of cylindrical grinding of type ABNT D6 steel, rationalizing the application of two cutting fluids and using a CBN (cubic boron nitrate) abrasive wheel with vitrified blond, the influence of the dive speed on the surface damages of hardened steels was evaluated. The results allowed to say that the dive speed, associated to an efficient cooling and lubrication, didn't provoke thermal damages (including heated zones, cracks and tension stresses) to the material. Residual stresses and the roughness of rectified materials presented a correlation with the machining conditions. The work concluded that it is possible to increase the productivity without provoking damages in the rectified components.

Influence of processing parameters on nanomaterials synthesis efficiency by a carbothermal reduction process

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of S(+)-ketamine analgesia in renal intraoperative ischemia: histological study in rats

OBJETIVO: Investigar, em ratos, o efeito da S(+)cetamina na histologia renal após hemorragia intra-operatória. MÉTODOS: Vinte ratos Wistar machos, anestesiados com pentobarbital sódico, foram divididos, aleatoriamente, em 2 grupos: G1 - controle (n=10) e G2 - S(+)cetamina (n=10), submetidos a hemorragia de 30% da volemia em 3 momentos (10% a cada 10 min) 60 min após anestesia. G2 recebeu S(+)cetamina, 15 mg. kg-1, i.m., 5 min após anestesia e 55 min antes do 1.º momento de hemorragia (M1). Foram monitorizadas a pressão arterial média (PAM), temperatura retal (T) e freqüência cardíaca. Os animais foram sacrificados (M4) 30 min após o 3.º momento de hemorragia (M3). Os rins e o sangue das hemorragias foram utilizados para estudo histológico e do hematócrito (Ht). RESULTADOS: Houve redução significativa da PAM, T e Ht. Na histologia, G1=G2 na dilatação tubular, congestão e necrose. A soma total dos escores foi significativamente diferente e G2>G1. CONCLUSÃO: Hemorragia e hipotensão determinaram alterações na histologia renal. O aumento da concentração sangüínea de catecolaminas provavelmente determinou escores mais altos de alterações histológicas com o uso de S(+)cetamina.

Effects of incubation temperature on muscle morphology and growth in the pacu (Piaractus mesopotamicus)

This study describes the influence of incubation temperature during initial development phase on the morphology and muscle growth characteristics in the pacu (Piaractus mesopotamicus). Pacu eggs were incubated at 25, 27, and 29 degreesC until hatching. After day 5, fish from each temperature were transferred to 5001 tanks. At hatching and after 5, 25, and 60 days, muscle samples were collected, some were frozen in liquid nitrogen and others fixed in 4% paraformaldehyde or 2.5% glutaraldehyde. These samples were used for morphological, histochemical, immunohistochemical, and morphometric analysis. At hatching, we observed a superficial monolayer of small diameter fibers, lying just beneath the skin surrounding several round cells. From day 5, we observed two distinct populations of muscle fibers distributed in two layers: (1) red-in a superficial region with aerobic activity, and following acid preincubation, high mATPase activity, and 2) white-with anaerobic activity, and following alkaline preincubation, high mATPase activity. Twenty-five days after hatching, an intermediate layer and cell proliferating zones could be seen in the dorsal fin muscle region, with intermediate characteristics. Throughout the experimental period, there was an increase in muscle mass due to new fiber recruitment in the cell proliferating zones and between the more differentiated fibers in red, intermediate, and white muscles. This was more obvious from day 25, and at 29 degreesC than at 25 and 27 degreesC. Fiber hypertrophy occurred from hatching to 60 days and was more evident from 5 to 25 days. The number of proliferating nuclei (PCNA-labelling) increased from hatching to 60 days, and was more obvious in the 29 degreesC group at 60 days. Our results show that at incubation temperatures of 25, 27 and 29 degreesC, hypertrophy was predominantly from hatching to 25 days, after that muscle growth by hyperplastic mechanism increased. The interaction of muscle hypertrophic and hyperplastic growth processes in the 29 degreesC group produced the largest fish at the end of the experiment. (C) 2004 Elsevier B.V. All rights reserved.

The influence of chronic stress imposed on pregnant rats on the induced bone loss in their adult offspring

Background and objective: Stress during pregnancy may alter offspring susceptibility to diseases during adulthood. In the present study, female Lewis rats were subjected to chronic stress during the gestational period, and the effect of this stress was evaluated histometrically on the progression of ligature-induced bone loss in their adult offspring.Material and methods: After confirming pregnancy, half of the pregnant rats were randomly designated as control animals (no stress regimen was imposed), and the other half was submitted to a chronic stress model (immobilization at cold temperature) between the 7th and the 18th gestational day. After birth, 12 male rats delivered by stressed mothers - Group 1 (G1) - and 12 male rats delivered by non-stressed mothers - Group 2 (G2) - were selected. When birthed rats reached 250 g of body weight, a silk ligature was placed around their maxillary right second molar in order to induce bone loss. The non-ligated left side served as a control. Sixty days later, these animals were sacrificed by anaesthetic overdose. After routine laboratorial processing, images of the histological sections were digitized and submitted for histometric measurement using two parameters: histological attachment loss and bone loss.Results: on the ligated side, G1 presented with greater histological attachment and bone loss than G2 (p < 0.05). on the non-ligated control side, neither of the groups presented with alterations in these parameters (p > 0.05).Conclusion: The chronic stress regimen imposed on pregnant rats produced a greater progression of ligature-induced bone loss in their adult offspring. (C) 0 2011 Elsevier Ltd. All rights reserved.

In Vitro Study of the influence of the pigments of three colored gels over the light distribution of visible light by digital images

Nowadays the real contribution of light on the acceleration of the chemical reaction for the dental bleaching is under incredulity, mostly because the real mechanisms of its contribution still are obscure. Objectives: Determine the influence of pigment of three colored bleaching gels in the light distribution and absorption in the teeth, to accomplish that, we have used in this experiment bovine teeth and three colored bleaching gels. It is well Known that the dark molecules absorb light and increase the local temperature upraising the bleaching rate, these molecules are located in the interface between the enamel and dentin. Methods: This study was realized using an argon laser with 455nm with 150mW of intensity and a LED with the same characteristics, three colored gels (green, blue and red) and to realize the capture of the digital images it was used a CCD camera connected to a PC. The images were processed in a mathematical environment (MATHLAB, R12 (R)). Results: The obtained results show that the color of the bleaching gel influences significantly the absorption of light in the specific sites of the teeth. Conclusions: This poor absorption can be one of the major factors involved with the incredulity of the light contribution on the process that can be observed in the literature nowadays.

Continuous and gradual photo-activation methods: influence on degree of conversion and crosslink density of composite resins

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Larval density, temperature and biological aspects of Chrysomya megacephala (Diptera: Calliphoridae)

Analisou-se o efeito de duas densidades larvais e duas temperaturas sobre a sobrevivência, fecundidade e tamanho corpóreo de C. megacephala em condições experimentais. Nenhum efeito simultâneo da densidade e temperatura foi encontrado sobre as variáveis investigadas em C. megacephala. Entretanto, foram observados efeitos isolados significativos da densidade e da temperatura sobre a fecundidade e tamanho corpóreo. A importância desses resultados para a dinâmica populacional de C. megacephala foi discutida.

Influence of atypical pluviosity on phytoplankton assemblages in a stretch of a large sub-tropical river (Brazil)

This study aimed to evaluate the influence of alterations in pluviosity and ecological variables on microphytoplankton (> 20 mu m) structure (composition, richness, diversity, and abundance) and its biomass (chlorophyll-a), comparing different regions in a stretch of the low Igua double dagger u River and in some tributaries. Phytoplankton was sampled in 10 stations (5 in Igua double dagger u River and 5 in tributaries) during a dry period (April/2004) and an atypical rainy period (June/2004). The conductivity showed significant difference among the sampling points. Temperature, dissolved oxygen, pH, silicate, and nitrate showed significant differences between the dry and wet periods. Phytoplankton was composed of 149 taxa, and the most representative class was Chlorophyceae (71 taxa), followed by Bacillariophyceae (35 taxa), and Cyanophyceae (25 taxa). During the rainy period, stations of Igua double dagger u River showed higher taxa number and total density compared to the tributaries, but the values were similar in the dry period. Tributaries presented higher diversity and equitability in both periods. Except by two stations in Igua double dagger u River, the higher taxa number, densities and biomass occurred in the dry period, associated to low levels of suspended matter. The canonical correspondence analysis indicated the dominance of Bacillariophyceae and Chrysophyceae in the rainy period related to nitrate and suspended matter. Two other groups were observed in the dry period: one formed by Cyanophyceae, Dinophyceae, and Rhodophyceae, related to temperature and nitrite and other by Euglenophyceae and Chlorophyceae related to total phosphorus and silicate. The groups suggest adequate conditions of the physical, chemical and climatic factors to the establishment of the algae classes. Phytoplanktonic assemblages responded quickly to the environmental regional variations under strong influence of pluviosity, while in the dry period, homogeneity among stations and environmental variables was observed. The importance of climatic events is relevant in ecological studies in a temporal scale.

Effects of temperature, sestonic algae features, and seston mineral content on cladocerans of a tropical lake

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of UV-C irradiation on the properties of thermoplastic starch and polycaprolactone biocomposite with sisal bleached fibers

The effect of UV-C irradiation of the TPS and PCL biocomposites with sisal bleached fibers was investigated. The biocomposite was UV-C irradiated at room temperature under air atmosphere. The structural and morphological changes produced when the films were exposed to UV irradiation for 142 h, were monitored using Scanning Electron Microscopy (SEM), Mechanical Tensile Tests, Differential Scanning Calorimetry (DSC), X-ray diffraction, Thermogravimetric analysis (TGA), and Fourier transform infra-red analysis (FTIR). Addition of 5-10% fibers in composites exhibited improved mechanical and thermal properties attributed to more efficient dispersibility of fiber in the matrix and good compatibility between fibers and the matrix polymer, however, after irradiated, the tensile properties decreased due to chain scission. The samples of irradiated PCL and IFS showed crystallinity increase, whereas the blend and composites showed a decrease in crystallinity. The DSC and X-ray diffraction studies suggested interaction between polymers in the blend via carboxyl groups in thermoplastic starch-PCL and hydroxyl groups in fibers. (C) 2011 Elsevier Ltd. All rights reserved.

The Use of Response Surface Methodology in Optimization of Lactic Acid Production: Focus on Medium Supplementation, Temperature and pH Control

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interaction of temperature and light on seed germination in Tecoma stans L. Juss. ex Kunth (Bignoniaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The shared influence of phylogeny and ecology on the reproductive patterns of Myrteae (Myrtaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of aquaculture effluents on the growth of Salvinia molesta

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)