Comparison of beam theory and finite-element analysis with in vivo bone strain data from the alligator cranium

The mechanical behavior of the vertebrate skull is often modeled using free-body analysis of simple geometric structures and, more recently, finite-element (FE) analysis. In this study, we compare experimentally collected in vivo bone strain orientations and magnitudes from the cranium of the American alligator with those extrapolated from a beam model and extracted from an FE model. The strain magnitudes predicted from beam and FE skull models bear little similarity to relative and absolute strain magnitudes recorded during in vivo biting experiments. However, quantitative differences between principal strain orientations extracted from the FE skull model and recorded during the in vivo experiments were smaller, and both generally matched expectations from the beam model. The differences in strain magnitude between the data sets may be attributable to the level of resolution of the models, the material properties used in the FE model, and the loading conditions (i.e., external forces and constraints). This study indicates that FE models and modeling of skulls as simple engineering structures may give a preliminary idea of how these structures are loaded, but whenever possible, modeling results should be verified with either in vitro or preferably in vivo testing, especially if precise knowledge of strain magnitudes is desired. (c) 2005 Wiley-Liss, Inc.

Beyond the sphere of the English facial approximation literature: Ramifications of German papers on western method concepts

In the English literature, facial approximation methods have been commonly classified into three types: Russian, American, or Combination. These categorizations are based on the protocols used, for example, whether methods use average soft-tissue depths (American methods) or require face muscle construction (Russian methods). However, literature searches outside the usual realm of English publications reveal key papers that demonstrate that the Russian category above has been founded on distorted views. In reality, Russian methods are based on limited face muscle construction, with heavy reliance on modified average soft-tissue depths. A closer inspection of the American method also reveals inconsistencies with the recognized classification scheme. This investigation thus demonstrates that all major methods of facial approximation depend on both face anatomy and average soft-tissue depths, rendering common method classification schemes redundant. The best way forward appears to be for practitioners to describe the methods they use (including the weight each one gives to average soft-tissue depths and deep face tissue construction) without placing them in any categorical classificatory group or giving them an ambiguous name. The state of this situation may need to be reviewed in the future in light of new research results and paradigms.

Assessing the taxonomic status of dingoes Canis familiaris dingo for conservation

1. The conservation status of the dingo Canis familiaris dingo is threatened by hybridization with the domestic dog C. familiaris familiaris. A practical method that can estimate the different levels of hybridization in the field is urgently required so that animals below a specific threshold of dingo ancestry (e.g. 1/4 or 1/2 dingoes) can reliably be identified and removed from dingo populations. 2. Skull morphology has been traditionally used to assess dingo purity, but this method does not discriminate between the different levels of dingo ancestry in hybrids. Furthermore, measurements can only be reliably taken from the skulls of dead animals. 3. Methods based on the analysis of variation in DNA are able to discriminate between the different levels of hybridization, but the validity of this method has been questioned because the materials currently used as a reference for dingoes are from captive animals of unproven genetic purity. The use of pre-European materials would improve the accuracy of this method, but suitable material has not been found in sufficient quantity to develop a reliable reference population. Furthermore, current methods based on DNA are impractical for the field-based discrimination of hybrids because samples require laboratory analysis. 4. Coat colour has also been used to estimate the extent of hybridization and is possibly the most practical method to apply in the field. However, this method may not be as powerful as genetic or morphological analyses because some hybrids (e.g. Australian cattle dog x dingo) are similar to dingoes in coat colour and body form. This problem may be alleviated by using additional visual characteristics such as the presence/absence of ticking and white markings.

Degenerate dentition of the dugong (Dugong dugon), or why a grazer does not need teeth: morphology, occlusion and wear of mouthparts

The morphology and functional occlusion of the cheekteeth of 57 dugongs Dugong dugon of both sexes were examined using reflected light and scanning electron microscopy, radiography, hardness testing and skull manipulation. The functional morphology of the horny oral pads was also described. Mouthparts and body size allometry was examined for ontogenetic and gender-related trends. We found that the worn erupted cheekteeth of the dugong are simple flat pegs composed of soft degenerative dentine. During occlusion, the mandible moves in a mainly antero-lingual direction, with the possibility of mandibular retraction in some individuals. Anterior parts of the cheektooth row may become non-functional as a dugong ages. As a function of body size, dugong cheekteeth are extremely small compared with those of other mammalian herbivores, and with other hindgut fermenters in particular. The morphology, small size and occlusal variability of the cheekteeth suggest that there has not been strong selective pressure acting to maintain an effective dentition. In contrast, great development of the horny pads and associated skull parameters and their lower size variability suggest that the horny pads may have assumed the major role in food comminution.

Reoperative parathyroid surgery: The importance of ectopic location and multigland disease

Background: Despite the availability of expert surgeons and preoperative imaging investigations, some patients require reoperation for persistent or recurrent hyperparathyroidisms. Method: Fifty consecutive patients were reviewed. Results: There were 28 persistent cases (24 primary, 4 secondary) and 22 recurrent cases (15 primary, 7 secondary) and 98% had successful surgical treatment. Multigland disease was present in 24 of 39 (62%) of primary cases, 11 of 24 persistent and 13 of 15 recurrent (P < 0.02). Four patients in the recurrent primary group had multiple endocrine neoplasia type 1, whereas the other 20 primary patients had sporadic multigland disease. Multigland disease was present in all secondary cases and was a very important factor in this entire series of patients (70%). Regrowth of a remnant of a gland biopsied or partially resected at an earlier operation was the cause of recurrence in 12 of 15 primary and 2 of 7 secondary cases (P < 0.05). The site of missed glands in persistent disease was ectopic in 60%. Ectopic glands were found in the following sites: intrathyroidal 10 (8 inferior and 2 superior), intrathymic 9, posterior mediastinum 4, base of skull 2, carotid sheath 1 and supernumerary 5. Investigations to locate missing glands were positive in 28 of 43 sestamibi scans (65%), 14 of 34 ultrasound scans (41%), 10 of 24 computed tomography scans (42%) and 11 of 13 selective venous sampling tests (85%). Conclusion: Some persistent cases are unavoidable because of ectopic locations and some recurrences are inevitable because of multigland disease.

Biomechanics of the rostrum in crocodilians: A comparative analysis using finite-element modeling

This article reports the use of simple beam and finite-element models to investigate the relationship between rostral shape and biomechanical performance in living crocodilians under a range of loading conditions. Load cases corresponded to simple biting, lateral head shaking, and twist feeding behaviors. The six specimens were chosen to reflect, as far as possible, the full range of rostral shape in living crocodilians: a juvenile Caiman crocodilus, subadult Alligator mississippiensis and Crocodylus johnstoni, and adult Caiman crocodilus, Melanosuchus niger, and Paleosuchus palpebrosus. The simple beam models were generated using morphometric landmarks from each specimen. Three of the finite-element models, the A. mississippiensis, juvenile Caiman crocodilus, and the Crocodylus johnstoni, were based on CT scan data from respective specimens, but these data were not available for the other models and so these-the adult Caiman crocodilus, M. niger, and P. palpebrosus-were generated by morphing the juvenile Caiman crocodilus mesh with reference to three-dimensional linear distance measured from specimens. Comparison of the mechanical performance of the six finite-element models essentially matched results of the simple beam models: relatively tall skulls performed best under vertical loading and tall and wide skulls performed best under torsional loading. The widely held assumption that the platyrostral (dorsoventrally flattened) crocodilian skull is optimized for torsional loading was not supported by either simple beam theory models or finite-element modeling. Rather than being purely optimized against loads encountered while subduing and processing food, the shape of the crocodilian rostrum may be significantly affected by the hydrodynamic constraints of catching agile aquatic prey. This observation has important implications for our understanding of biomechanics in crocodilians and other aquatic reptiles.

Estudo cefalométrico-radiográfico individualizado do posicionamento da maxila em indivíduos com oclusão normal

O posicionamento da maxila no esqueleto craniofacial tem sido motivo de investigação por diversos autores ao longo do tempo. Traduzindo suas idéias por meio de medidas lineares ou angulares, tais autores definiram o que consideraram como a posição ideal , normal , ou aceitável da maxila, relacionando-a, na maioria das vezes, com a base do crânio. A partir da avaliação de indivíduos com oclusão considerada normal e com bom equilíbrio facial, eram calculados valores médios e desvios-padrão de determinadas medidas, os quais eram tomados como parâmetros para avaliações cefalométricas de pacientes distintos. Diante das divergências de opiniões encontradas na literatura, a proposta do presente estudo foi avaliar o posicionamento da maxila nos sentidos vertical, ântero-posterior e a sua inclinação, numa amostra de 94 indivíduos com oclusão normal. Foram determinadas correlações entre medidas do próprio indivíduo: OPI-N com OPI-ENA e N-ENA com ENA-ENP. A partir dos fortes índices de correlação encontrados, concluiu-se que a medida OPI-N pode ser tomada como referência para determinação de OPI-ENA, da mesma forma que ENA-ENP pode ser considerada para determinação de N-ENA, definindo respectivamente a posição da maxila nos sentidos sagital e vertical. A inclinação da maxila, representada aqui pelo ângulo OPI.ENA.ENP, teve valor médio estatisticamente próximo a 0o (zero), indicando forte tendência do prolongamento posterior do plano palatino (ENA-ENP) tangenciar a base posterior do crânio (ponto OPI), o que se revela uma importante característica de indivíduos com oclusão normal.

Möten med muslimer i Sverige

Snart tjugo miljoner muslimer lever i Europa, och runt 300 000 i Sverige. Knappt fyra procent av Sveriges befolkning är muslimer, och bara en liten del av dem utövar sin religion, är praktiserande. Men alla muslimer, oavsett grad av religiositet, behandlas ungefär på samma sätt. De möts av fördomar, okunskap och hat. Detta konstaterande låter journalisten och författaren Kerstin Gustafsson Figueroa bli utgångspunkt för en antologi -För Guds skull. Muslimer i Sverige -fylld av personliga samtal med människor bakom stereotypierna.

Co-registration of magnetoencephalography with magnetic resonance imaging using bite-bar-based fiducials and surface-matching

Objective: To introduce a new technique for co-registration of Magnetoencephalography (MEG) with magnetic resonance imaging (MRI). We compare the accuracy of a new bite-bar with fixed fiducials to a previous technique whereby fiducial coils were attached proximal to landmarks on the skull. Methods: A bite-bar with fixed fiducial coils is used to determine the position of the head in the MEG co-ordinate system. Co-registration is performed by a surface-matching technique. The advantage of fixing the coils is that the co-ordinate system is not based upon arbitrary and operator dependent fiducial points that are attached to landmarks (e.g. nasion and the preauricular points), but rather on those that are permanently fixed in relation to the skull. Results: As a consequence of minimizing coil movement during digitization, errors in localization of the coils are significantly reduced, as shown by a randomization test. Displacement of the bite-bar caused by removal and repositioning between MEG recordings is minimal (∼0.5 mm), and dipole localization accuracy of a somatosensory mapping paradigm shows a repeatability of ∼5 mm. The overall accuracy of the new procedure is greatly improved compared to the previous technique. Conclusions: The test-retest reliability and accuracy of target localization with the new design is superior to techniques that incorporate anatomical-based fiducial points or coils placed on the circumference of the head. © 2003 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Source localization methods

One of the most pressing demands on electrophysiology applied to the diagnosis of epilepsy is the non-invasive localization of the neuronal generators responsible for brain electrical and magnetic fields (the so-called inverse problem). These neuronal generators produce primary currents in the brain, which together with passive currents give rise to the EEG signal. Unfortunately, the signal we measure on the scalp surface doesn't directly indicate the location of the active neuronal assemblies. This is the expression of the ambiguity of the underlying static electromagnetic inverse problem, partly due to the relatively limited number of independent measures available. A given electric potential distribution recorded at the scalp can be explained by the activity of infinite different configurations of intracranial sources. In contrast, the forward problem, which consists of computing the potential field at the scalp from known source locations and strengths with known geometry and conductivity properties of the brain and its layers (CSF/meninges, skin and skull), i.e. the head model, has a unique solution. The head models vary from the computationally simpler spherical models (three or four concentric spheres) to the realistic models based on the segmentation of anatomical images obtained using magnetic resonance imaging (MRI). Realistic models – computationally intensive and difficult to implement – can separate different tissues of the head and account for the convoluted geometry of the brain and the significant inter-individual variability. In real-life applications, if the assumptions of the statistical, anatomical or functional properties of the signal and the volume in which it is generated are meaningful, a true three-dimensional tomographic representation of sources of brain electrical activity is possible in spite of the ‘ill-posed’ nature of the inverse problem (Michel et al., 2004). The techniques used to achieve this are now referred to as electrical source imaging (ESI) or magnetic source imaging (MSI). The first issue to influence reconstruction accuracy is spatial sampling, i.e. the number of EEG electrodes. It has been shown that this relationship is not linear, reaching a plateau at about 128 electrodes, provided spatial distribution is uniform. The second factor is related to the different properties of the source localization strategies used with respect to the hypothesized source configuration.

An integrated functional mapping and source localization platform for brain research

The premise of this dissertation is to create a highly integrated platform that combines the most current recording technologies for brain research through the development of new algorithms for three-dimensional (3D) functional mapping and 3D source localization. The recording modalities that were integrated include: Electroencephalography (EEG), Optical Topographic Maps (OTM), Magnetic Resonance Imaging (MRI), and Diffusion Tensor Imaging (DTI). This work can be divided into two parts: The first part involves the integration of OTM with MRI, where the topographic maps are mapped to both the skull and cortical surface of the brain. This integration process is made possible through the development of new algorithms that determine the probes location on the MRI head model and warping the 2D topographic maps onto the 3D MRI head/brain model. Dynamic changes of the brain activation can be visualized on the MRI head model through a graphical user interface. The second part of this research involves augmenting a fiber tracking system, by adding the ability to integrate the source localization results generated by commercial software named Curry. This task involved registering the EEG electrodes and the dipole results to the MRI data. Such Integration will allow the visualization of fiber tracts, along with the source of the EEG, in a 3D transparent brain structure. The research findings of this dissertation were tested and validated through the participation of patients from Miami Children Hospital (MCH). Such an integrated platform presented to the medical professionals in the form of a user-friendly graphical interface is viewed as a major contribution of this dissertation. It should be emphasized that there are two main aspects to this research endeavor: (1) if a dipole could be situated in time at its different positions, its trajectory may reveal additional information on the extent and nature of the brain malfunction; (2) situating such a dipole trajectory with respect to the fiber tracks could ensure the preservation of these fiber tracks (axons) during surgical interventions, preserving as a consequence these parts of the brain that are responsible for information transmission.

Citoarquitetura e imunoistoquímica para tirosinahidroxilase dos núcleos dopaminérgicos mesencefálicos do morcego (Artibeus planirostris)

The 3-Hidroxytyramine/dopamine (DA) is a monoamine of catecholamine family and isthe precursor substance synthesis of noradrenaline and adrenaline, having the enzymeTyrosine Hydroxylase (TH) as this regulatory process. In addition, the DA has theability to act as a neurotransmitter in the Central Nervous System - SNC, being themain neurotransmitter of brain nuclei, namely of A8 to A16. The nuclei of the midbrainthat express DA are the Retrorubral Field (RRF, A8), the Substantia Nigra parsCompacta (SNc, A9) and the Ventral Tegmental Area (VTA, A10). Such nuclei areinvolved in complex three circuitry that are the mesostriatal, mesolimbic andmesocotical and are directly related with several behavioral manifestations as motricitycontrol, reward signaling in behavioral learning, motivation and pathologicalconditions, such as Parkinson's Disease and schizophrenia. Interestingly, many of themorphological bases of these neural disturbance remain unknown. Considering therelevance of mesencephalic dopaminergic nuclei, the aim of this research is tocharacterize morphologically the dopaminergic nuclei (clusters A8, A9 and A10) of themidbrain of the bat (Artibeus planirostris). The Artibeus planirostris is a common bat inRio Grande do Norte. Ten animals were used in this research. The animals wereanesthetized, perfused, and the brain was removed from the skull. After dehydration insucrose, the brain was underwent microtomy. Saggital and coronal sections wereobtained and collected in six separate series. The series were Nissl-stained to identifythe cytoarchitectonic boundaries and the other series were subjected toimmunohistochemistry for TH. After cytoarchitectonic analysis and TH+ cellsidentification was possible to establish the anatomical boundaries of the nuclei, as wellas the subdivisions of three of the midbrain dopaminergic nuclei. The SNc is the mostrostral nucleus observed in the midbrain and is identified throughout the rostrocaudalextension of the midbrain. The VTA neurons were seen immediately caudal to the SNcappearance. The RRF neurons were observed just in the caudal levels of the midbrain.The SNc in Artibeus planirostris shows a particular feature, the tail of the SNc. The tailhave been described just in two other studied species. The present work shows aparticular variation in the organizational morphology of the SNc in the artibeus andcontribute to understand the phylogenetic routes by which the dopaminergic system hasevolved.

Morfometria dos forames mandibular, mentual e infraorbital de Lobo-guará Chrysocyon brachyurus, Illiger, 1815 aplicada a bloqueios anestésicos

CHAPTER II - The Chrysocyon brachyurus is the biggest South American canid which has a high frequency of dental injuries, both in wild and captivity. Thus, veterinary procedures are necessary to preserve the feeding capacity of hundreds of captive specimens worldwide. The aim of this study was to study the mandibular morphometry of maned wolf with emphasis on the establishment of anatomic references to the anesthetic blockage of the inferior alveolar and mental nerves. Therefore, 15 measurements in 22 hemimandibles of C. brachyurus adults were taken. For extra-oral technique of blockage of the inferior alveolar nerve at the level of the mandibular foramen, it is stated that the needle should be advanced, close to the medial surface of the mandibular ramus, by 11.4 mm perpendiculary from the palpable concavity. Alternatively, the needle can be introduced for 30.4 mm from the angular process at 20-25 degrees angle with the ventral margin. For blocking only the mentual nerve, it is recommended the introduction of needle for 10 mm, close to the lateral aspect of the mandibular body, at the level of the lower first premolar. The mandibular foramen showed similars position, size and symmetry in the maned wolfs specimens examined. The comparison of the data with those available for other carnivores reflects the necessity for determining these anatomical references specifically for each species.

The use of close-range photogrammetry in zooarchaeology : Creating accurate 3D models of wolf crania to study dog domestication

Acknowledgements We thank the Muséum National d'Histoire Naturelle, Paris, that provided access to the specimens, and access to the morphometric platform where the surface scans were performed. We also thank Raphael Cornette and Julien Claude for the fruitful discussions we had when writing the manuscript. This work was supported by NERC (grant number NE/K003259/1) and the European Research Council (ERC-2013-StG 337574-UNDEAD). This is publication ISEM 2016-127. We thank the two anonymous reviewers who greatly helped to improve the manuscript.

Ethnogenesis and Craniofacial Change in Japan from the Perspective of Nonmetric Traits

To examine population affinities in light of the ‘dual structure model’, frequencies of 21 nonmetric cranial traits were analyzed in 17 prehistoric to recent samples from Japan and five from continental northeast Asia. Eight bivariate plots, each representing a different bone or region of the skull, as well as cluster analysis of 21-trait mean measures of divergence using multidimensional scaling and additive tree techniques, revealed good discrimination between the Jomon-Ainu indigenous lineage and that of the immigrants who arrived from continental Asia after 300 BC. In Hokkaido, in agreement with historical records, Ainu villages of Hidaka province were least, and those close to the Japan Sea coast were most, hybridized with Wajin. In the central islands, clines were identified among Wajin skeletal samples whereby those from Kyushu most resembled continental northeast Asians, while those from the northernmost prefectures of Tohoku apparently retained the strongest indigenous heritage. In the more southerly prefectures of Tohoku, stronger traces of Jomon ancestry prevailed in the cohort born during the latest Edo period than in the one born after 1870. Thus, it seems that increased inter-regional mobility and gene flow following the Meiji Restoration initiated the most recent episode in the long process of demic diffusion that has helped to shape craniofacial change in Japan.