Pension structural reforms, re-reforms and their effects on social welfare: The case of Chile

This article fi rst summarizes the structural reforms of pensions (total or partial privatization) in Latin America and Central and Eastern Europe, identifying their advantages and disadvantages, and does the same with the international process of re-reforms of pensions with a greater role of the state. Second, chooses Chile as a case study, as a world pioneer in both types of reforms; describes their characteristics and effects on social welfare of the structural reform of 1981 and the re-reform of 2008. Such effects are evaluated based on ten basic principles of social security from the International Labour Offi ce (ILO): 1) social dialogue to approve the reforms, 2) universal coverage of the population, 3) equal treatment of insured persons, 4) social solidarity, 5) gender equity, 6) suffi ciency of benefi ts, 7) effi ciency and reasonable administrative cost, 8) social participation in the management of the system, 9) role of the state and supervision, and 10) fi nancial sustainability. Third, it summarizes the advantages and disadvantages-challenges of the re-reform and informs on the current debate for further reforms.

Factorial Design of Cement Slurries Containing Limestone Powder for Self-Consolidating Slurry-Infiltrated Fiber Concrete

Slurries with high penetrability for production of Self-consolidating Slurry Infiltrated Fiber Concrete (SIFCON) were investigated in this study. Factorial experimental design was adopted in this investigation to assess the combined effects of five independent variables on mini-slump test, plate cohesion meter, induced bleeding test, J-fiber penetration test and compressive strength at 7 and 28 days. The independent variables investigated were the proportions of limestone powder (LSP) and sand, the dosages of superplasticiser (SP) and viscosity agent (VA), and water-to-binder ratio (w/b). A two-level fractional factorial statistical method was used to model the influence of key parameters on properties affecting the behaviour of fresh cement slurry and compressive strength. The models are valid for mixes with 10 to 50% LSP as replacement of cement, 0.02 to 0.06% VA by mass of cement, 0.6 to 1.2% SP and 50 to 150% sand (% mass of binder) and 0.42 to 0.48 w/b. The influences of LSP, SP, VA, sand and W/B were characterised and analysed using polynomial regression which identifies the primary factors and their interactions on the measured properties. Mathematical polynomials were developed for mini-slump, plate cohesion meter, J-fiber penetration test, induced bleeding and compressive strength as functions of LSP, SP, VA, sand and w/b. The estimated results of mini-slump, induced bleeding test and compressive strength from the derived models are compared with results obtained from previously proposed models that were developed for cement paste. The proposed response models of the self-consolidating SIFCON offer useful information regarding the mix optimization to secure a highly penetration of slurry with low compressive strength

Influence of mix proprtions on rheolgy of cement grouts containing limestone powder

In this paper the parameters of cement grout affecting rheological behaviour and compressive strength are investigated. Factorial experimental design was adopted in this investigation to assess the combined effects of the following factors on fluidity, rheological properties, induced bleeding and compressive strength: water/binder ratio (W/B), dosage of superplasticiser (SP), dosage of viscosity agent (VA), and proportion of limestone powder as replacement of cement (LSP). Mini-slump test, Marsh cone, Lombardi plate cohesion meter, induced bleeding test, coaxial rotating cylinder viscometer were used to evaluate the rheology of the cement grout and the compressive strengths at 7 and 28 days were measured. A two-level fractional factorial statistical model was used to model the influence of key parameters on properties affecting the fluidity, the rheology and compressive strength. The models are valid for mixes with 0.35-0.42 W/B, 0.3-1.2% SP, 0.02-0.7% VA (percentage of binder) and 12-45% LSP as replacement of cement. The influences of W/B, SP, VA and LSP were characterised and analysed using polynomial regression which can identify the primary factors and their interactions on the measured properties. Mathematical polynomials were developed for mini-slump, plate cohesion meter, inducing bleeding, yield value, plastic viscosity and compressive strength as function of W/B, SP, VA and proportion of LSP. The statistical approach used highlighted the limestone powder effect and the dosage of SP and VA on the various rheological characteristics of cement grout

Density-Enhanced Gas and Dust Shells in a New Chemical Model for IRC+10216

A new chemical model is presented for the carbon-rich circumstellar envelope (CSE) of the asymptotic giant branch star IRC+10216. The model includes shells of matter with densities that are enhanced relative to the surrounding circumstellar medium. The chemical model uses an updated reaction network including reactions from the RATE06 database and a more detailed anion chemistry. In particular, new mechanisms are considered for the formation of CN-, C3N-, and C2H-, and for the reactions of hydrocarbon anions with atomic nitrogen and with the most abundant cations in the CSE. New reactions involving H- are included which result in the production of significant amounts of C2H- and CN- in the inner envelope. The calculated radial molecular abundance profiles for the hydrocarbons C2H, C4H, and C6H and the cyanopolyynes HC3N and HC5N show narrow peaks which are in better agreement with observations than previous models. Thus, the narrow rings observed in molecular microwave emission surrounding IRC+10216 are interpreted as arising in regions of the envelope where the gas and dust densities are greater than the surrounding circumstellar medium. Our models show that CN- and C2H- may be detectable in IRC+10216 despite the very low theorized radiative electron attachment rates of their parent neutral species. We also show that magnesium isocyanide (MgNC) can be formed in the outer envelope through radiative association involving Mg+ and the cyanopolyyne species.

Modelling the performance of self-compacting SIFCON of cement slurries containing limestone powder using genetic programming technique

The paper explores the potential of applicability of Genetic programming approach (GP), adopted in this investigation, to model the combined effects of five independent variables to predict the mini-slump, the plate cohesion meter, the induced bleeding test, the J-fiber penetration value, and the compressive strength at 7 and 28 days of self-compacting slurry infiltrated fiber concrete (SIFCON). The variables investigated were the proportions of limestone powder (LSP) and sand, the dosage rates of superplasticiser (SP) and viscosity modifying agent (VMA), and water-to-binder ratio (W/B). Twenty eight mixtures were made with 10-50% LSP as replacement of cement, 0.02-0.06% VMA by mass of cement, 0.6-1.2% SP and 50-150% sand (% mass of binder) and 0.42-0.48 W/B. The proposed genetic models of the self-compacting SIFCON offer useful modelling approach regarding the mix optimisation in predicting the fluidity, the cohesion, the bleeding, the penetration, and the compressive strength.

Effect of Mix Proportions on Rheological and Hardened Properties of Composite Cement Pastes

There is an increasing need to identify the effect of mix composition on the rheological properties of composite cement pastes using simple tests to determine the fluidity, the cohesion and other mechanical properties of grouting applications such as compressive strength. This paper reviews statistical models developed using a fractional factorial design which was carried out to model the influence of key parameters on properties affecting the performance of composite cement paste. Such responses of fluidity included mini-slump, flow time using Marsh cone and cohesion measured by Lombardi plate meter and unit weight, and compressive strength at 3 d, 7 d and 28 d. The models are valid for mixes with 0.35 to 0.42 water-to-binder ratio (W/B), 10% to 40% of pulverised fuel ash (PFA) as replacement of cement by mass, 0.02 to 0.06% of viscosity enhancer admixture (VEA), by mass of binder, and 0.3 to 1.2% of superplasticizer (SP), by mass of binder. The derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of composite cement paste are presented. Such parameters can be useful to reduce the test protocol needed for proportioning of composite cement paste. This paper attempts also to demonstrate the usefulness of the models to better understand trade-offs between parameters and compare the responses obtained from the various test methods which are highlighted. The multi parametric optimization is used in order to establish isoresponses for a desirability function of cement composite paste. Results indicate that the replacement of cement by PFA is compromising the early compressive strength and up 26%, the desirability function decreased.

Factorial Design of Modelling Mix Proportion Parameters of Underwater Composite Cement Grouts

There is an increasing need to identify the rheological properties of cement grout using a simple test to determine the fluidity, and other properties of underwater applications such as washout resistance and compressive strength. This paper reviews statistical models developed using a factorial design that was carried out to model the influence of key parameters on properties affecting the performance of underwater cement grout. Such responses of fluidity included minislump and flow time measured by Marsh cone, washout resistance, unit weight, and compressive strength. The models are valid for mixes with 0.35–0.55 water-to-binder ratio (W/B), 0.053–0.141% of antiwashout admixture (AWA), by mass of water, and 0.4–1.8% (dry extract) of superplasticizer (SP), by mass of binder. Two types of underwater grout were tested: the first one made with cement and the second one made with 20% of pulverised fuel ash (PFA) replacement, by mass of binder. Also presented are the derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of underwater cement grout. Such parameters can be useful to reduce the test protocol needed for proportioning of underwater cement grout. This paper attempts also to demonstrate the usefulness of the models to better understand trade-offs between parameters and compare the responses obtained from the various test methods that are highlighted.

Scarred limpets at hydrothermal vents: evidence of predation by deep-sea whelks

The chaotic physical and chemical environment at deep-sea hydrothermal vents has been associated with an ecosystem with few predators, arguably allowing the habitat to provide refuge for vulnerable species. The dominance of endemic limpets with thin, open-coiled shells at north Pacific vents may support this view. To test their vulnerability to predation, the incidence of healed repair scars, which are argued to reflect non-lethal encounters with predators, were examined on the shells of over 5,800 vent limpets of Lepetodrilus fucensis McLean (1988) that were collected from 13 to 18 August 1996. Three vent fields on the Juan de Fuca Ridge at ca. 2,200 m depth were sampled, two within 70 m of 47 degrees 56.87'N 129 degrees 05.91'W, and one at 47 degrees 57.85'N 129 degrees 05.15'W with the conspicuous potential limpet predators, the zoarcid fish Pachycara gymninium Anderson and Peden (1988), the galatheid crab Munidopsis alvisca Williams (1988), and the buccinid snail Buccinum thermophilum Harasewych and Kantor (2002). Limpets from the predator-rich vent were most often scarred, a significant difference created by the high incidence of scars on small (

IMMUNOCYTOCHEMICAL AND RADIOIMMUNOMETRICAL DEMONSTRATION OF SEROTONIN-IMMUNOREACTIVITIES AND NEUROPEPTIDE-IMMUNOREACTIVITIES IN THE ADULT-RAT TAPEWORM, HYMENOLEPIS-DIMINUTA (CESTODA, CYCLOPHYLLIDEA)

Standard indirect immunocytochemical techniques have been interfaced with confocal scanning laser microscopy (for whole-mount preparations) and epifluorescence microscopy (for cryosections) to investigate the occurrence and distribution of serotoninergic and peptidergic nerve elements in adult H. diminuta. Serotonin (5-HT)-immunoreactivity (IR) was widespread throughout the worm, occurring in the paired cerebral ganglia, transverse commissure, the 10 longitudinal nerve cords and in a plethora of small nerve fibres of the peripheral nervous system. An abundance of serotoninergic nerve cell bodies was found in association with the lateral nerve cords. The genital atrium and accessory reproductive ducts were richly innervated with serotoninergic nerve fibres. Thirty-five antisera to 20 vertebrate regulatory peptides and 1 invertebrate peptide (FMRFamide) were used to screen the worm for neuropeptide IR. Immunostaining was obtained with antisera raised to pancreatic polypeptide (PP), peptide YY (PYY), neuropeptide Y (NPY), substance P (SP), peptide histidine isoleucine (PHI), xenopsin (XP) and FMRFamide. The most extensive pattern of IR occurred with antisera to PP and PYY, IR being evident in the cerebral ganglia, transverse commissure, longitudinal nerve cords and in small nerve fibres that ramified throughout the parenchyma. A series of bipolar nerve cell bodies between the median nerve cords displayed PP/PYY-IR. The distribution of FMRFamide-IR was reminiscent of the PP/PYY pattern but was less extensive. Comparison of the serotoninergic and peptidergic nervous systems has revealed general similarities and some distinct differences, especially with regard to the distribution of immunoreactive nerve cell bodies. Quantitative data are presented on the levels of PP-, SP-, PHI-, and gastrin-releasing peptide (GRP)-immunoreactivities demonstrable in acid-alcohol extracts of whole worms. The highest level of peptide IR determined was recorded for PP.

AN IMMUNOCYTOCHEMICAL STUDY OF PUTATIVE NEUROTRANSMITTERS IN THE METACERCARIAE OF 2 STRIGEOID TREMATODES FROM RAINBOW-TROUT (ONCORHYNCHUS-MYKISS)

Whole mounts of the metacercariae of Diplostomum sp. and Cotylurus erraticus from rainbow trout have been treated cytochemically for the demonstration of cholinergic, serotoninergic (5-hydroxytryptamine) and peptidergic elements in the nervous system. Antisera directed against four vertebrate (pancreatic polypeptide, peptide YY, substance P and peptide histidine isoleucine) and two invertebrate peptides (neuropeptide F and FMRFamide) were used in an indirect immunofluorescence procedure in conjunction with confocal scanning laser microscopy (CSLM). Of the seven antisera tested, all except peptide histidine isoleucine showed significant immunoreactivity. Cholinergic and serotoninergic staining was found primarily in the central nervous system (CNS) and in cell bodies associated with the ventral and dorsal nerve cords in both trematodes. Peptidergic immunoreactivity was localised in the CNS and PNS of both genera, revealing an extensive innervation within the holdfast organ and in and around the oral and ventral suckers.

S21 Culture Independent Identification Of Bacterial Communities In The Respiratory Tract Of Patients With Copd, Healthy Non-smokers And Healthy Smokers

Introduction and aims: The role bacteria play in the development and progression of Chronic Obstructive Pulmonary Disease (COPD) is unclear. We used culture-independent methods to describe differences and/or similarities in microbial communities in the lower airways of patients with COPD, healthy non-smokers and smokers.

Methods: Bronchial wash samples were collected from patients with COPD (GOLD 1–3; n = 18), healthy non-smokers (HV; n = 11) and healthy smokers (HS; n = 8). Samples were processed using the Illumina MiSeq platform. The Shannon-Wiener Index (SW) of diversity, lung obstruction (FEV1/FVC ratio) and ordination by Non-Metric Multidimensional Scaling (NMDS) on Bray-Curtis dissimilarity indices were analysed to evaluate how samples were related. Principal component analysis (PCA) was performed to assess the effect specific taxa had within each cohort. Characteristics of each cohort are shown in Table 1.

Results: There was no difference in taxa richness between cohorts (range: 69–71; p = 0.954). Diversity (SW Index) was significantly lower in COPD samples compared to samples from HV and HS (p = 0.009 and p = 0.033, respectively). There was no significant difference between HV and HS (p = 0.186). The FEV1/FVC ratio was significantly lower for COPD compared to HV (p = 9*10–8) and HS (p = 2*10–6), respectively. NMDS analysis showed that communities belonging to either of the healthy groups were more similar to each other than they were to samples belonging to the COPD group. PCA analysis showed that members of Streptococcus sp. and Haemophilus sp. had the largest effect on the variance explained in COPD. In HS, Haemophilus sp., Fusobaterium sp., Actinomyces sp., Prevotella sp. and Veillonella sp. had the largest effect on the variance explained, while in HV Neisseria sp., Porphyromonas sp., Actinomyces sp., Atopobium sp., Prevotella and Veillonella sp. had the largest effect on the variance explained.

Conclusions: The study demonstrates that microbial communities in the lower airways of patients with COPD are significantly different from that seen in healthy comparison groups. Patients with COPD had lower microbial diversity than either of the healthy comparison groups, higher relative abundance of members of Streptococcus sp. and lower relative abundance of a number of key anaerobes.Characteristics

CULTURE AND CULTURE INDEPENDANT IDENTIFICATION OF BACTERIAL COMMUNITIES IN THE CYSTIC FIBROSIS RESPIRATORY TRACT

Introduction and Aims: The identification of complex chronic polymicrobial infections, such as those observed in the cystic fibrosis (CF) airways, are often a diagnostic challenge. Few studies have compared culture-dependent methods with molecular identification making it hard to describe bacterial communities in a comprehensive manner. The aim of the study is to compare four different methods with respect to their similarities and differences in detection of bacteria. Methods: We compared41 sputum samples fromroutine clinical-culture, extended-culture (aerobic and anaerobic), and molecular identification such as Roche 454-FLX Titanium and T-RFLP to assess concurrence between methodologies in detecting bacteria. The agreement between methodologies in detecting either absence or presence of bacterial taxa was assessed by Kappa (κ) statistics. Results: The majority of bacterial taxa identified by culture were also identified with molecular analysis. In total 2, 60, 25, and 179 different bacterial taxa were identified with clinical-culture, extended-culture, T-RFLP and 454-FLX respectively. Clinical-culture, extended-culture and T-RFLP were poor predictors of species richness when compared to 454-FLX (p < 0.0001). Agreement between methods for detecting Pseudomonas sp. and Burkholderia sp. was good with κ ≥ 0.7 [p < 0.0001] and κ ≥ 0.9 [p < 0.0001] respectively. Detection of anaerobic bacteria, such as Prevotella sp. and Veillonella sp., was moderate between extended-culture and 454-FLX with κ = 0.461 [p < 0.0001] and κ = 0.311 [p = 0.032] respectively, and good between T-RFLP and 454-FLX with κ = 0.577 [p < 0.0001] and κ = 0.808 [p < 0.0001] respectively. Agreement between methods for other main bacterial taxa, such as Staphylcoccus sp. and Streptococcus sp., was poor with only a moderate agreement for detection of Streptococcus sp. observed between T-RFLP and 454-FLX (κ = 0.221 [p = 0.024]). Conclusions: This study demonstrates the increased sensitivity culture-independent microbial identification such as the 454-FLX have over clinical-culture, extended-culture and T-RFLP methodologies. The extended-culture detected majority of the most prevalent bacterial taxa associated with chronic colonisation of the CF airways which were also detected by culture-independent methodologies. However, agreement between methods in detecting number of potentially relevant bacteria is largely lacking.

Modelling the fresh properties of self-compacting concrete using support vector machine approach

The main objective of the study presented in this paper was to investigate the feasibility using support vector machines (SVM) for the prediction of the fresh properties of self-compacting concrete. The radial basis function (RBF) and polynomial kernels were used to predict these properties as a function of the content of mix components. The fresh properties were assessed with the slump flow, T50, T60, V-funnel time, Orimet time, and blocking ratio (L-box). The retention of these tests was also measured at 30 and 60 min after adding the first water. The water dosage varied from 188 to 208 L/m3, the dosage of superplasticiser (SP) from 3.8 to 5.8 kg/m3, and the volume of coarse aggregates from 220 to 360 L/m3. In total, twenty mixes were used to measure the fresh state properties with different mixture compositions. RBF kernel was more accurate compared to polynomial kernel based support vector machines with a root mean square error (RMSE) of 26.9 (correlation coefficient of R2 = 0.974) for slump flow prediction, a RMSE of 0.55 (R2 = 0.910) for T50 (s) prediction, a RMSE of 1.71 (R2 = 0.812) for T60 (s) prediction, a RMSE of 0.1517 (R2 = 0.990) for V-funnel time prediction, a RMSE of 3.99 (R2 = 0.976) for Orimet time prediction, and a RMSE of 0.042 (R2 = 0.988) for L-box ratio prediction, respectively. A sensitivity analysis was performed to evaluate the effects of the dosage of cement and limestone powder, the water content, the volumes of coarse aggregate and sand, the dosage of SP and the testing time on the predicted test responses. The analysis indicates that the proposed SVM RBF model can gain a high precision, which provides an alternative method for predicting the fresh properties of SCC.

A radiation-damped R -matrix approach to the electron-impact excitation of helium-like ions for diagnostic application to fusion and astrophysical plasmas

Electron-impact excitation collision strengths for transitions between all singly excited levels up to the n = 4 shell of helium-Eke argon and the n = 4 and 5 shells of helium-like iron have been calculated using a radiation-damped R-matrix approach. The theoretical collision strengths have been examined and associated with their infinite-energy limit values to allow the preparation of Maxwell-averaged effective collision strengths. These are conservatively considered to be accurate to within 20% at all temperatures, 3 x 10(5)-3 x 10(8) K forAr(16+) and 10(6)-10(9) K for Fe24+. They have been compared with the results of previous studies, where possible, and we find a broad accord. The corresponding rate coefficients are required for use in the calculation of derived, collisional-radiative, effective emission coefficients for helium-like lines for diagnostic application to fusion and astrophysical plasmas. The uncertainties in the fundamental collision data have been used to provide a critical assessment of the expected resultant uncertainties in such derived data, including redistributive and cascade collisional-radiative effects. The consequential uncertainties in the parts of the effective emission coefficients driven by excitation from the ground levels for the key w, x, y and z lines vary between 5% and 10%. Our results remove an uncertainty in the reaction rates of a key class of atomic processes governing the spectral emission of helium-like ions in plasmas.

Diversity of Aeromonas species from different environments in Portugal

Espécies de Aeromonas encontram-se distribuídas por diferentes habitats, estando especialmente relacionadas com ambientes aquáticos. O seu papel em complicações na saúde humana e animal é reconhecido. De facto, não só pelo seu potencial de virulência, mas também pelos determinantes genéticos de resistência a antibióticos que possam conter, estes organismos constituem uma preocupação na medicina humana e veterinária. Assim, é essencial o estudo da diversidade de espécies de Aeromonas bem como explorar as suas características fenotípicas e genéticas que podem conduzir a impactos negativos. A água constitui um importante veículo de transmissão de microrganismos e espécies de Aeromonas estão amplamente distribuídas em águas tratadas e não tratadas. Em Portugal é ainda comum o consumo de águas não tratadas cuja qualidade, na maioria das vezes, não é sujeita a monitorização, como acontece por exemplo, em explorações agrícolas de gestão familiar. Neste estudo, investigou-se a presença de Aeromonas em águas não tratadas para consumo. Estabeleceu-se também uma linha horizontal de colheitas de diferentes amostras de origem agrícola com o intuito de avaliar a possibilidade de a água ser uma das vias de contaminação de culturas agrícolas e animais por espécies de Aeromonas. Obtiveram-se 483 isolados que foram discriminados por RAPD-PCR. 169 estirpes distintas foram identificadas ao nível da espécie por análise filogenética baseada no gene gyrB. Verificou-se uma frequente ocorrência bem como uma diversidade considerável de espécies de Aeromonas. Em alguns casos, as relações genotípicas entre isolados de diferentes amostras eram muito próximas. Adicionalmente, a maioria das amostras continha diferentes espécies e estirpes distintas da mesma espécie. A. media e A. hydrophila foram as espécies mais ocorrentes. Um grupo de isolados apresentou variantes moleculares de gyrB diferente das conhecidas até agora, o que indica que poderão constituir espécies não descritas. O perfil de susceptibilidade da colecção de Aeromonas a diferentes antibióticos foi estabelecido, constituindo um perfil típico do género, com algumas excepções. Estirpes multirresistentes foram encontradas. A presença de genes tet e bla foi investigada por estudos de PCR, hibridação e, em alguns casos, de sequenciação. Como era esperado, cphA/imiS foi o mais detectado. A detecção de integrões fez-se por PCR e hibridação e a sua caracterização foi feita por sequenciação de DNA; a sua ocorrência foi reduzida. A maioria das estirpes sintetizou enzimas extracelulares com actividade lipolítica e proteolítica que potencialmente contribuem para virulência. A análise por PCR e hibridação permitiram a detecção de vários determinantes genéticos que codificam moléculas possivelmente envolvidas em processos patogénicos. Diversas espécies de Aeromonas apresentando características relacionadas com resistência a antibióticos e potencialmente de virulência estão frequentemente presentes em produtos para consumo humano e animal em Portugal. ABSTRACT: Aeromonas spp. are present in a wide range of ecological niches, being mainly related to aquatic environments. Their role in human and animal health complications is recognised. In fact, not only for their putative virulence but also for the antibiotic resistance genetic determinants Aeromonas may harbour, these organisms constitute an issue of concern in human and veterinary medicine. Thus, it is essential to get knowledge on Aeromonas sp. diversity and on their genotypic and phenotypic characteristics that may lead to negative impacts. Water constitutes a good contamination route for microorganisms and Aeromonas are widespread in untreated and treated waters from different sources. In Portugal there is still an extensive use of untreated water which is not regularly monitored for quality. This is often the case in family smallholding farms. In this study untreated drinking and mineral waters were assessed for their content in Aeromonas spp. Furthermore, a sampling scheme was designed to investigate the occurrence and diversity of Aeromonas sp. in different agricultural correlated sources and to assess the possibility of water being the transmission vehicle between those sources. 483 isolates were obtained and discriminated by RAPD-PCR. Identification at the species level for 169 distinct strains was done by gyrB based phylogenetic analysis. Results demonstrated the frequent occurrence and considerable diversity of Aeromonas spp. In some cases, genotypic close relations were found between isolates from different sources. Also, most samples contained different species and distinct strains of the same species. A. media and A. hydrophila were the most occurring. A group of isolates displayed gyrB gene sequences distinct from the previously known, indicating that they may constitute representatives of non-described species. The antibiotic susceptibility profile of the aeromonads collection was established and constituted a typical profile of the genus, although few exceptions. Multiresistance patterns were found. The presence of tet and bla genes was investigated by PCR, hybridisation and, in some cases, sequencing analysis. As expected, cphA/imiS was the most detected. Integrons were screened by PCR and hybridisation and characterised by DNA sequencing; low occurrence was recorded. The bulk of strains was able to produce extracellular enzymes with lipolytic and proteolytic activities, which may contribute to virulence. PCR and hybridisation surveys allowed the detection of distinct genetic determinants coding for molecules putatively involved in pathogenic processes. Diverse Aeromonas sp. presenting distinct antibiotic resistance features and putative virulence traits are frequently present in many sources for human and animal consumption in Portugal.