Influence of seed layer orientation on the growth and physical properties of SnS nanostructures

Stoichiometric tin (II) sulfide (SnS) nano-structures were synthesized on SnS(010)/glass substrates using a simple and low-temperature chemical solution method, and their physical properties were investigated. The as-synthesized SnS nanostructures exhibited orthorhombic crystal structure and most of the nanocrystals are preferentially oriented along the <010> direction. These nanostructures showed p-type electrical conductivity and high electrical resistivity of 93 Omega cm. SnS nanostructures exhibited a direct optical band gap of 1.43 eV. While increasing the surrounding temperature from 20 to 150 degrees C, the electrical resistivity of the structures decreased and exhibited the activation energy of 0.28 eV.

Fixed-orientation equilateral triangle matching of point sets

Given a point set P and a class C of geometric objects, G(C)(P) is a geometric graph with vertex set P such that any two vertices p and q are adjacent if and only if there is some C is an element of C containing both p and q but no other points from P. We study G(del)(P) graphs where del is the class of downward equilateral triangles (i.e., equilateral triangles with one of their sides parallel to the x-axis and the corner opposite to this side below that side). For point sets in general position, these graphs have been shown to be equivalent to half-Theta(6) graphs and TD-Delaunay graphs. The main result in our paper is that for point sets P in general position, G(del)(P) always contains a matching of size at least vertical bar P vertical bar-1/3] and this bound is tight. We also give some structural properties of G(star)(P) graphs, where is the class which contains both upward and downward equilateral triangles. We show that for point sets in general position, the block cut point graph of G(star)(P) is simply a path. Through the equivalence of G(star)(P) graphs with Theta(6) graphs, we also derive that any Theta(6) graph can have at most 5n-11 edges, for point sets in general position. (C) 2013 Elsevier B.V. All rights reserved.

Orientation dependent mechanical properties of commercially pure (cp) titanium

The present investigation is an attempt at correlating the crystallographic orientation and mechanical properties of hexagonal commercially pure titanium (cp-titanium). Annealed cp-titanium sheets are subjected to tensile deformation along the rolling direction, along 45 degrees to the rolling direction and along 90 degrees to the rolling direction respectively. Crystallographic textures and mechanical properties of these cp-titanium samples are investigated in the present study. The hardness of different grains/orientations is estimated through nanoindentation, grain average misorientation, orientation estimated elastic stiffness and Taylor factor measurements. It is observed that the hardness of the grains close to basal orientation is higher compared to non-basal orientations. It is further observed that the estimated bulk mechanical properties of cp-titanium have a direct relationship with the volume fraction of basal grains/orientations. (C) 2014 Elsevier Inc All rights reserved.

Effect of Nb orientation and deformation on the growth of Nb3Sn intermetallic superconductor by bronze technique

The growth of Nb3Sn by bronze technique on single crystals and deformed Nb is studied. The grain boundary diffusion-controlled growth rate is found to be higher for Nb-(0 1 3) than Nb-(0 1 1) because of smaller grain size of Nb3Sn. The difference in grain size is explained with the help of surface energies leading to different nucleation barrier. Significantly finer grains and higher growth rate of the product phase is found for rolled Nb because of available defects acting as potential nucleation sites.

Orientation Selection and Microstructural Evolution in Directionally Solidified Tb0.3Dy0.7Fe1.95

Tb0.3Dy0.7Fe1.95 alloy was directionally solidified by using a modified Bridgman technique at a wide range of growth rates of 5 to 100 cm/h. The directionally grown samples exhibited plane front solidification morphology up to a growth rate of 90 cm/h. Typical island banding feature was observed closer to the chilled end, which eventually gave rise to irregular peritectic coupled growth (PCG). The PCG gained prominence with an increase in the growth rate. The texture study revealed formation of strong aOE (c) 311 > texture in a lower growth rate regime, aOE (c) 110 > and ``rotated aOE (c) 110 > aEuroe in an intermediate growth regime, and aOE (c) 112 > in a higher growth rate regime. In-depth analysis of the atomic configuration of a solid-liquid interface revealed that the growth texture is influenced by the kinetics of atomic attachment to the solid-liquid interface, which is intimately related to a planar packing fraction and an atomic stacking sequence of the interfacial plane. The mechanism proposed in this article is novel and will be useful in addressing the orientation selection mechanism of topologically closed packed intermetallic systems. The samples grown at a higher growth rate exhibit larger magnetostriction (lambda) and d lambda/dH owing to the absence of pro-peritectic (Tb,Dy)Fe-3 and formation of aOE (c) 112 > texture, which lies closer to the easy magnetization direction (EMD).

Organization dependent collective magnetic properties of secondary nanostructures with differential spatial ordering and magnetic easy axis orientation

Achieving control on the formation of different organization states of magnetic nanoparticles is crucial to harness their organization dependent physical properties in desired ways. In this study, three organization states of iron oxide nanoparticles (gamma-Fe2O3), defining as (i) assembly (ii) network aggregate and (iii) cluster, have been developed by simply changing the solvent evaporation conditions. All three systems have retained the same phase and polydispersity of primary particles. Magnetic measurements show that the partial alignment of the easy axes of the particles in the network system due to the stacking aggregation morphology can result in significant enhancement of the coercivity and remanence values, while the opposite is obtained for the cluster system due to the random orientation of easy axes. Partial alignment in the aggregate system also results in noticeable non -monotonic field dependence of ZFC peak temperature (TpeaB). The lowest value of the blocking temperature (TB) for the cluster system is related to the lowering of the effective anisotropy due to the strongest demagnetizing effect. FC (Field cooled) memory effect was observed to be decreasing with the increasing strength of dipolar interaction of organization states. Therefore, the stacking aggregation and the cluster formation are two interesting ways of magnetic nanoparticles organization for modulating collective magnetic properties significantly, which can have renewed application potentials from recording devices to biomedicine. (C) 2016 Elsevier B.V. All rights reserved.

Effects of the orientation of microgravity on the concentration distribution in crystallization from solution

A quasi-steady state growth and dissolution in a 2-D rectangular enclosure is numerically investigated. This paper is an extension to indicate the effects of the orientation of gravity on the concentration field in crystallization from solution under microgravity, especially on the lateral non-uniformity of concentration distribution at the growth surface. The thermal and solute convection are included in this model.

Orientation-based Continuum Damage Models for Rocks

A general formulation of the Helmholtz free energy used in thermodynamics of damage process of rocks is derived within a multi-scale framework. Such a physically-based thermodynamic state potential has a hybrid, discrete/continuum, nature in the sense tha

Evaluación de semilla sexual hibrida de papa (Solanum tuberosum L.) provenientes del Centro Internacional de la Papa e India en la zona de Miraflor, Esteli

Con el objetivo de seleccionar progenies promisorias de semilla sexual de papa, procedentes del CIP (11) y Programa de la India (3) se estableció este ensayo el 21 de septiembre de 1994, utilizando un diseño de Bloques Completos al Azar (BCA) con cuatro repeticiones, en la estación experimental del Instituto Nicaragüense de Tecnología Agropecuaria (INTA-RB-3), ubicada a 1 350 msnm, humedad relativa del 91 por ciento, temperatura promedio mínima 15 °C/máx 26 °C, cuyos suelos son de textura franca bien drenada, medianamente profundo a profundo, con una precipitación durante el ensayo de 622 mm. Los resultados obtenidos muestran que todas las progenies híbridas enviadas por el CIP mostraron buena velocidad de emergencia en especial SERRANA x LT-7, con respecto a los lubridos de la India. En general el porcentaje de sobrevivencia fue mayor del 80 por ciento para la mayoría de las progenies el cual es un índice aceptable, a excepción de 104.12 LB x TS-4.En la altura final de la planta no hubieron diferencias significativas entre híbridos, solo fueron superiores a KATADIN x TS-10. En cuanto al rendimiento, la progenie HPS­ II/67 mostró ser superior a las demás con 6.2 kg/m2. El número total de tubérculos por metro cuadrado {740) y tubérculos por planta (7) fue superior en la progenie TS-6 x TPS-67. Las progenies de ambos programas mostraron rendimientos por metro cuadrado de más del 50 por ciento con tubérculos mayores de 5 gramos. No se presentó incidencia de virus para ambas progenies, las tres progenies provenientes del Programa de la India presentaron mayor resistencia a tizón tardío (Phytophthora infestans, Mont. D.bary).

Efficient topological localization using orientation adjacency coherence histograms

This paper describes an efficient vision-based global topological localization approach that uses a coarse-to-fine strategy. Orientation Adjacency Coherence Histogram (OACH), a novel image feature, is proposed to improve the coarse localization. The coarse localization results are taken as inputs for the fine localization which is carried out by matching Harris-Laplace interest points characterized by the SIFT descriptor. Computation of OACHs and interest points is efficient due to the fact that these features are computed in an integrated process. We have implemented and tested the localization system in real environments. The experimental results demonstrate that our approach is efficient and reliable in both indoor and outdoor environments. © 2006 IEEE.

Evaluacion de diferentes niveles de fertilizantes NPK en la produccion de minituberculos de papa (Solanum tuberosum L.) en semillero para la producción comercial, proveniente de semilla sexual, variedad ATZIMBA

La papa es una fuente de alimentación importante a nivel mundial, en Nicaragua los altos costos de importación de semilla de buena calidad, tiene como efecto, la dificultad de los productores de aumentar áreas de siembra y el bajo consumo con respecto a otros países por el costo de este producto. La falta de un programa nacional de producción de semilla contribuye al problema, ya que muchos productores no tienen acceso a semilla, pero al introducir la semilla botánica de papa para producción de minituberculos, hace que el productor demande nuevos conocimientos, por tanto hay que desarrollarlos, uno de estos conocimientos es la dosis de fertilización adecuada en semillero de papa para la producción de minituberculos. Existen estudios en otros países como Perú, pero no son adaptables a nuestras condiciones, por tal motivo se estableció un ensayo en el Mojón, Jinotega, el cual comprendió de septiembre a diciembre del 2002, el diseño utilizado fue el de Bloques Completos al Azar (BCA), donde se evaluaron cinco dosis de fertilizantes. El área experimental fue de 105 m2, la comparación de medias se realizo por Duncan al 0.05 de probabilidad. Los objetivos del ensayo fueron: objetivo general: Evaluar el efecto de distintos niveles de fertilización sobre la producción de mini tubérculos de papa (Solanum tuberosum L.) en semillero, proveniente de semilla sexual o semilla verdadera. Objetivos específicos: Estudiar el efecto de diferentes dosis de fertilizantes en almacigo para la producción de minituberculos de papa, determinar la dosis con las que se obtienen los mejores rendimientos en la producción de minituberculos de papa, y realizar un análisis Beneficio–Costo de los resultados obtenidos para determinar cual es el tratamiento que económica y productivamente es el más rentable. Los parámetros evaluados fueron: altura de plantas, plantas cosechadas, cuatro categorías de peso de tubérculos y número de tubérculos totales por hectárea, además el rendimiento de minitubérculos de papa. No se encontró evidencia estadísticas que alguna dosis aumente el numero de tubérculos por hectárea, pero, se demostró que la aplicación de 300 a 450 kilogramos de urea, 270 a 420 kilogramos del fertilizante 18-46-00 y 80 a 130 kilogramos de sulfato de amonio aumenta el rendimiento en peso de minitubérculos, y la ganancia de los productores aumenta de 133 000 a 139 300 córdobas por hectárea. Aplicaciones mayores de fertilizantes causan perdidas hasta en 41 600 córdobas por hectárea con respecto a la aplicación de los productores.

The “Centre for Child Protection” of the Gregorian University/Rome. First experiences, results and reflections in setting up a global e-learning-program for the prevention of sexual abuse of minors

Resumen: El Centro para la Protección Infantil ha sido fundado en cooperación con el Instituto de Psicología de la Universidad Gregoriana (Roma, Italia), el Departamento para la Psiquiatría/Psicoterapia Infantil y Adolescente del Hospital de la Universidad de Ulm (Alemania) y la Arquidiócesis de Múnich (Alemania). Su tarea principal es la creación de un centro global de entrenamiento e-learning para profesiones de pastoral que respondan al abuso sexual de los menores, tomando en consideración asuntos multilingüísticos e interculturales. Dentro de tres años el Centro desarrollado e implementado un programa e-learning en cuatro lenguas. Ocho socios del proyecto internacional asumen un papel en el reclutamiento de participantes y en la evaluación en curso del programa. En esta fase, personas-test son incluidas en el desarrollo y la evaluación del programa, como parte de la formación (en curso) de sacerdotes y de otros coagentes de pastoral

Del combate singular al singular combate sexual en la sátira trovadoresca medieval gallego-portuguesa

Integran este número de la revista ponencias presentadas en Studia Hispanica Medievalia VIII: Actas de las IX Jornadas Internacionales de Literatura Española Medieval, 2008, y de Homenaje al Quinto Centenario de Amadis de Gaula.

Bio-inspired mechanics of reversible adhesion: Orientation-dependent adhesion strength for non-slipping adhesive contact with transversely isotropic elastic materials

Geckos and many insects have evolved elastically anisotropic adhesive tissues with hierarchical structures that allow these animals not only to adhere robustly to rough surfaces but also to detach easily upon movement. In order to improve Our understanding of the role of elastic anisotropy in reversible adhesion, here we extend the classical JKR model of adhesive contact mechanics to anisotropic materials. In particular, we consider the plane strain problem of a rigid cylinder in non-slipping adhesive contact with a transversely isotropic elastic half space with the axis of symmetry oriented at an angle inclined to the surface. The cylinder is then subjected to an arbitrarily oriented pulling force. The critical force and contact width at pull-off are calculated as a function of the pulling angle. The analysis shows that elastic anisotropy leads to an orientation-dependent adhesion strength which can vary strongly with the direction of pulling. This study may suggest possible mechanisms by which reversible adhesion devices can be designed for engineering applications. (C) 2006 Elsevier Ltd. All rights reserved.