Plant uses in different bronze and iron age settlements from the Nuoro province (Sardinia). The results of phytolith analyses from several ceramic fragments and grinding stones.

Ceramic vessels and milling stones are important components of the archaeological record in several Nuraghi from the Pranemuru Plateau (Sardinia). To obtain information on the possible uses of the milling stones and the content vessels is of great interest to understand the economical activities carried out in these sites by these populations. One of the approaches to obtain information on the plant uses was the phytolith analyses of the sediment adhered both to the surface of the milling stones and to the surface of the vessel content. In total we analyzed eleven archaeological samples and two control samples collected from five different Nuraghi in the Pranemuru Plateau (Nuoro Province, Sardinia). The Nuraghi were located in an area of 10 km radius from nuraghe Arrubiu and were chronologically ascribed to the Bronze Age and one site -Pranu Illixi- to the Iron Age.

Sinais de hipervascularização em imagens de ressonância magnética em metástases ósseas de carcinoma de células renais

OBJETIVO: Avaliar a frequência de hipervascularização pela visualização de vasos no interior ou ao redor de metástases ósseas de carcinoma de células renais. MATERIAIS E MÉTODOS: Foram avaliados, retrospectivamente, exames de ressonância magnética de 13 pacientes com diagnóstico de carcinoma de células renais, com 15 lesões ósseas metastáticas, que não haviam sido submetidos a nenhum tratamento. RESULTADOS: Foram encontrados sinais de hipervascularização em 12 das 15 lesões (80%), sendo 6 na coluna lombar, 3 na bacia, 1 na coluna torácica, 1 na ulna e 1 na tíbia. CONCLUSÃO: A alta frequência de hipervascularização em metástases ósseas de carcinoma de células renais encontrada neste trabalho pode sugerir a etiologia renal, tornando-se muito útil na apresentação clínica usual de lesão óssea única com neoplasia primária desconhecida.

El desenvolupament curricular del bloc d’activitats al medi natural per part dels professors d’Educació Física de la ciutat de Vic i les poblacions del voltant

L’estudi que es presenta a continuació té l’objectiu d’analitzar el desenvolupament curricular del bloc de continguts d’activitats al medi natural de l’assignatura d’Educació Física de la ciutat de Vic i de les poblacions situades en un radi de 10 kilòmetres. Per tal de dur-ho a terme, primerament s’ha realitzat un procés d’aproximació a les activitats al medi natural en l’educació, aprofundint en les característiques d’aquestes activitats en els centres, en la poca pràctica i els factors de limitació que tenen. A partir d’aquí, s’ha fet l’estudi amb una mostra formada de 29 professors d’Educació Física dels diferents cursos de la ESO. Per tal de realitzar la recerca i l’anàlisi, s’ha emprat una metodologia quantitativa de caràcter explicatiu, transversal i quasi experimental, i s’ha utilitzat l’instrument corresponent al qüestionari. Aquest, ha estat elaborat prenent com a referència el de l’estudi de Peñarrubia et al.(2011). Els resultats que s’han obtingut demostren que el bloc d’activitats al medi natural és el menys treballat per part del professors d’Educació Física, que un 14% del professorat no les treballa i dels que si ho fan un 68% les realitzen només una vegada a l’any. També destacar que aquests continguts no es treballen en el 33% dels cursos de la zona estudiada. Pel què fa els continguts més treballats destaquen l’orientació seguit del senderisme. Referent als factors de limitació destaquen la responsabilitat civil del professor i l’horari de classe com els més condicionants. Pel què fa a les activitats, l’escalada esdevé l’activitat on els factors de limitació influeixen més mentre que en l’orientació i el senderisme tenen poca importància. D’aquesta manera es pot veure una estreta relació entre els factors de limitació d’aquestes activitats i la poca pràctica d’aquestes en els centres educatius estudiats.

Sobre a aplicabilidade da termogravimetria para a estimativa de parâmetros termoquímicos de compostos de coordenação: os elementos lantanídicos

By using thermochemical data reported for a series of chelates of the type [Ln(thd)3], thd = 2, 2, 6, 6 ­ tetramethyl- 3,5-heptanedione and Ln = La, Pr, Nd, Sm, Gd, Tb, Ho, Er, Tm and Yb, empirical correlations were found involving thermochemical parameters (e.g. dissociation enthalpy) and the thermodynamic temperatures of the beginning of thermal degradation of the chelates, t i. It is shown that t i values are of capital importance in the study of this all class of coordination compounds. Among others, the empirical equation is obtained: r3+ = (-0,013.Z + 1,36)/0,005, that relates the lanthanide cation radius (pm) with the atomic number of the element. The remarkable fact is that this equation is achieved by using thermogravimetric and calorimetric parameters. Is also shown that t i values are related with the P(M) function values, which are very close related with the energy difference, deltaE, between the lowest electronic energy level of the f n s²d¹ configuration and the lowest energy level of the f n+1s² configuration in the neutral gaseous atoms.

Conservation Laws in Cellular Automata

Conservation laws in physics are numerical invariants of the dynamics of a system. In cellular automata (CA), a similar concept has already been defined and studied. To each local pattern of cell states a real value is associated, interpreted as the “energy” (or “mass”, or . . . ) of that pattern.The overall “energy” of a configuration is simply the sum of the energy of the local patterns appearing on different positions in the configuration. We have a conservation law for that energy, if the total energy of each configuration remains constant during the evolution of the CA. For a given conservation law, it is desirable to find microscopic explanations for the dynamics of the conserved energy in terms of flows of energy from one region toward another. Often, it happens that the energy values are from non-negative integers, and are interpreted as the number of “particles” distributed on a configuration. In such cases, it is conjectured that one can always provide a microscopic explanation for the conservation laws by prescribing rules for the local movement of the particles. The onedimensional case has already been solved by Fuk´s and Pivato. We extend this to two-dimensional cellular automata with radius-0,5 neighborhood on the square lattice. We then consider conservation laws in which the energy values are chosen from a commutative group or semigroup. In this case, the class of all conservation laws for a CA form a partially ordered hierarchy. We study the structure of this hierarchy and prove some basic facts about it. Although the local properties of this hierarchy (at least in the group-valued case) are tractable, its global properties turn out to be algorithmically inaccessible. In particular, we prove that it is undecidable whether this hierarchy is trivial (i.e., if the CA has any non-trivial conservation law at all) or unbounded. We point out some interconnections between the structure of this hierarchy and the dynamical properties of the CA. We show that positively expansive CA do not have non-trivial conservation laws. We also investigate a curious relationship between conservation laws and invariant Gibbs measures in reversible and surjective CA. Gibbs measures are known to coincide with the equilibrium states of a lattice system defined in terms of a Hamiltonian. For reversible cellular automata, each conserved quantity may play the role of a Hamiltonian, and provides a Gibbs measure (or a set of Gibbs measures, in case of phase multiplicity) that is invariant. Conversely, every invariant Gibbs measure provides a conservation law for the CA. For surjective CA, the former statement also follows (in a slightly different form) from the variational characterization of the Gibbs measures. For one-dimensional surjective CA, we show that each invariant Gibbs measure provides a conservation law. We also prove that surjective CA almost surely preserve the average information content per cell with respect to any probability measure.

Fragmentation of massive dense cores down to <~ 1000 AU: relation between fragmentation and density structure

In order to shed light on the main physical processes controlling fragmentation of massive dense cores, we present a uniform study of the density structure of 19 massive dense cores, selected to be at similar evolutionary stages, for which their relative fragmentation level was assessed in a previous work. We inferred the density structure of the 19 cores through a simultaneous fit of the radial intensity profiles at 450 and 850 μm (or 1.2 mm in two cases) and the spectral energy distribution, assuming spherical symmetry and that the density and temperature of the cores decrease with radius following power-laws. Even though the estimated fragmentation level is strictly speaking a lower limit, its relative value is significant and several trends could be explored with our data. We find a weak (inverse) trend of fragmentation level and density power-law index, with steeper density profiles tending to show lower fragmentation, and vice versa. In addition, we find a trend of fragmentation increasing with density within a given radius, which arises from a combination of flat density profile and high central density and is consistent with Jeans fragmentation. We considered the effects of rotational-to-gravitational energy ratio, non-thermal velocity dispersion, and turbulence mode on the density structure of the cores, and found that compressive turbulence seems to yield higher central densities. Finally, a possible explanation for the origin of cores with concentrated density profiles, which are the cores showing no fragmentation, could be related with a strong magnetic field, consistent with the outcome of radiation magnetohydrodynamic simulations.

Garvey-Kelson relations for nuclear charge radii

The Garvey-Kelson relations (GKRs) are algebraic expressions originally developed to predict nuclear masses. In this letter we show that the GKRs provide a fruitful framework for the prediction of other physical observables that also display a slowly-varying dynamics. Based on this concept, we extend the GKRs to the study of nuclear charge radii. The GKRs are tested on 455 out of the approximately 800 nuclei whose charge radius is experimentally known. We find a rms deviation between the GK predictions and the experimental values of only 0.01 fm. This should be contrasted against some of the most successful microscopic models that yield rms deviations almost three times as large. Predictions -with reliable uncertainties- are provided for 116 nuclei whose charge radius is presently unknown.

Degradation of thin tungsten filaments at high temperature in HWCVD

The degradation of the filaments is usually studied by checking the silicidation or carbonization status of the refractory metal used as catalysts, and their effects on the structural stability of the filaments. In this paper, it will be shown that the catalytic stability of a filament heated at high temperature is much shorter than its structural lifetime. The electrical resistance of a thin tungsten filament and the deposition rate of the deposited thin film have been monitored during the filament aging. It has been found that the deposition rate drops drastically once the quantity of dissolved silicon in the tungsten reaches the solubility limit and the silicides start precipitating. This manuscript concludes that the catalytic stability is only guaranteed for a short time and that for sufficiently thick filaments it does not depend on the filament radius.

Remoção de metais pesados de efluentes aquosos pela zeólita natural escolecita - influência da temperatura e do pH na adsorção em sistemas monoelementares

Cation exchange capabilities of a Brazilian natural zeolite, identified as scolecite, were evaluated for application in wastewater control. We investigated the process of sorption of chromium(III), nickel(II), cadmium(II) and manganese(II) in synthetic aqueous effluents, including adsorption isotherms of single-metal solutions. The natural zeolite showed the ability to take up the tested heavy metals in the order Cr(III) > Cd(II) > Ni(II) > Mn(II), and this could be related to the valence and the hydration radius of the metal cations. The influence of temperature (25, 40 and 60 ºC) and initial pH value (from 4 to 6) was also evaluated. It was found that the adsorption increased substantially when the temperature was raised to 60 ºC and that maximum adsorption capacity was observed at pH 6. These results demonstrate that scolecite can be used for removal of heavy metals from aqueous effluents, under optimized conditions.

Calculation of the critical crack size for cold form rectangular hollow section tube (CRHS) under bending load at -40º C temperature

To predict the capacity of the structure or the point which is followed by instability, calculation of the critical crack size is important. Structures usually contain several cracks but not necessarily all of these cracks lead to failure or reach the critical size. So, defining the harmful cracks or the crack size which is the most leading one to failure provides criteria for structure’s capacity at elevated temperature. The scope of this thesis was to calculate fracture parameters like stress intensity factor, the J integral and plastic and ultimate capacity of the structure to estimate critical crack size for this specific structure. Several three dimensional (3D) simulations using finite element method by Ansys program and boundary element method by Frank 3D program were carried out to calculate fracture parameters and results with the aid of laboratory tests (loaddisplacement curve, the J resistance curve and yield or ultimate stress) leaded to extract critical size of the crack. Two types of the fracture which is usually affected by temperature, Elastic and Elasti-Plastic fractures were simulated by performing several linear elastic and nonlinear elastic analyses. Geometry details of the weldment; flank angle and toe radius were also studied independently to estimate the location of crack initiation and simulate stress field in early stages of crack extension in structure. In this work also overview of the structure’s capacity in room temperature (20 ºC) was studied. Comparison of the results in different temperature (20 ºC and -40 ºC) provides a threshold of the structure’s behavior within the defined range.

Investigating the spontaneous formation of SDS micelle in aqueous solution using a coarse-grained force field

A 1µs Molecular Dynamic simulation was performed with a realistic model system of Sodium Dodecyl Sulfate (SDS) micelles in aqueous solution, comprising of 360 DS-, 360 Na+ and 90000 water particles. After 300 ns three different micellar shapes and sizes 41, 68 and 95 monomers, were observed. The process led to stabilization in the total number of SDS clusters and an increase in the micellar radius to 2.23 nm, in agreement with experimental results. An important conclusion, is be aware that simulations employed in one aggregate, should be considered as a constraint. Size and shape distribution must be analyzed.

Avaliação do conhecimento sobre periodicidade química em uma turma de química geral do ensino a distância

This work describes the software Quiptabela, suggests a teaching activity, and analyses responses of general chemistry students from the Biological Sciences distance course at the Federal University of Tocantins. The software was described according to its educational potential, featuring the creation of dozens of charts or tables correlating physicochemical properties of the elements, being Brazilian, and free distribution. The teaching activities suggested analyzed students' ability to create and analyze tables and charts correlating the properties of chemical elements. Some 41% of students tested could define the term "periodic", but failed to use the concept to explain and differentiate changes in mass or atomic radius with the atomic number of elements.

Propriedades relacionadas à acidez e basicidade a partir da abordagem em química computacional

Analytical Chemistry books lack a clear link between thermodynamic and equilibrium approaches involving acids and bases. In this work, theoretical calculations were performed to search for these relations. An excellent relationship was found between difference in Gibbs free energy, ∆G of acid dissociation reaction and ∆G of hydrolysis reaction of the corresponding conjugate base. A relationship between ∆G of hydrolysis reaction of conjugate acids and their corresponding atomic radius was also identified, showing that stability plays an important role in hydrolysis reactions. Finally, the importance of solvation in acid/base behavior was demonstrated when comparing the corresponding theoretical and experimental ∆G´s.

Lasikuituputkien kelauslinjan automatisointi

Lasikuituputkien kelaamiseen tarkoitettu automaatio voidaan toteuttaa suorakulmaisen kolmion trigonometrian perusteella. Kelaaminen tapahtuu pyörittämällä muottia ja liikuttamalla samalla muottia sivuttain. Näin tehdessä saadaan kelattavat lasikuitulangat leviämään koko muotin leveydelle. Jos langat halutaan saada kelattua tiiviisti toistensa viereen, on muotin liikuttava tietty matka yhtä muotin pyörähdystä kohden. Matkaa kutsutaan nousuksi. Nousu riippuu lankojen muodostaman kimpun leveydestä, kelauskulmasta ja muotin säteestä. Kelauskulmalla voidaan vaikuttaa kelattavan tuotteen aksiaaliseen ja pitkittäiseen lujuuteen. Kelauskoneen automaatiojärjestelmä koostuu sähkökäytöistä, ohjaavasta yksiköstä, valvomosta ja erilaisista antureista. Eri osat yhdistetään toisiinsa väylätekniikalla. Sähkökäytöt ovat yleensä servokäyttöjä, koska niiltä vaaditaan tarkkuutta ja nopeutta. Ohjaavana yksikkönä toimii yleensä teollisuus logiikka. Anturointia tarvitaan esimerkiksi hartsin lämpötilan säätöön ja lankojen ratakireyden säätöön. Anturoinnilla ja säädöillä pyritään parantamaan kelattavan tuotteen laatua. Koneen ohjelmallinen toteutus vaatii kelauskoneen mekaniikan ja kelausprosessin ymmärtämistä. Lisäksi on huomioitava koneen käyttäjät ja heidän turvallisuus.

Fatigue analysis of brackets with and without scallop for bridge and other deck structure using effective notch stress.

Due to functional requirement of a structural detail brackets with and without scallop are frequently used in bridges, decks, ships and offshore structure. Scallops are designed to serve as passage way for fluids, to reduce weld length and plate distortions. Moreover, scallops are used to avoid intersection of two or more welds for the fact that there is the presence of inventible inherent initial crack except for full penetrated weld and the formation of multi-axial stress state at the weld intersection. Welding all around the scallop corner increase the possibility of brittle fracture even for the case the bracket is not loaded by primary load. Avoiding of scallop will establish an initial crack in the corner if bracket is welded by fillet welds. If the two weld run pass had crossed, this would have given a 3D residual stress situation. Therefore the presences and absence of scallop necessitates the 3D FEA fatigue resistance of both types of brackets using effective notch stress approach ( ). FEMAP 10.1 with NX NASTRAN was used for the 3D FEA. The first and main objective of this research was to investigate and compare the fatigue resistance of brackets with and without scallop. The secondary goal was the fatigue design of scallops in case they cannot be avoided for some reason. The fatigue resistance for both types of brackets was determined based on approach using 1 mm fictitiously rounded radius based on IIW recommendation. Identical geometrical, boundary and loading conditions were used for the determination and comparison of fatigue resistance of both types of brackets using linear 3D FEA. Moreover the size effect of bracket length was also studied using 2D SHELL element FEA. In the case of brackets with scallop the flange plate weld toe at the corner of the scallop was found to exhibit the highest and made the flange plate weld toe critical for fatigue failure. Whereas weld root and weld toe at the weld intersections were the highly stressed location for brackets without scallop. Thus weld toe for brackets with scallop, and weld root and weld toe for brackets without scallop were found to be the critical area for fatigue failure. Employing identical parameters on both types of brackets, brackets without scallop had the highest except for full penetrated weld. Furthermore the fatigue resistance of brackets without scallop was highly affected by the lack of weld penetration length and it was found out that decreased as the weld penetration was increased. Despite the fact that the very presence of scallop reduces the stiffness and also same time induce stress concentration, based on the 3D FEA it is worth concluding that using scallop provided better fatigue resistance when both types of brackets were fillet welded. However brackets without scallop had the highest fatigue resistance when full penetration weld was used. This thesis also showed that weld toe for brackets with scallop was the only highly stressed area unlike brackets without scallop in which both weld toe and weld root were the critical locations for fatigue failure when different types of boundary conditions were used. Weld throat thickness, plate thickness, scallop radius, lack of weld penetration length, boundary condition and weld quality affected the fatigue resistance of both types of brackets. And as a result, bracket design procedure, especially welding quality and post weld treatment techniques significantly affect the fatigue resistance of both type of brackets.