951 resultados para product lifecycle management


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Effluent from pulp and paper production at the Kemsley mill of Bowaters U.K. Paper Company Limited passes through two treatment stages before its discharge into the Swale estuary. Suspended material removed during treatment is deposited on wasteground as a thin sludge. The solids it contains are mainly wood components lost during pulp production, whilst it also has a high salt content, derived from chemicals used in pulping processes. After deposition the sludge undergoes an ageing process during which it dries out and its salt content is reduced. This ageing can be reproduced and accelerated by improved drainage under controlled conditions. The paper mill sludge was investigated as a casing medium in the culture of Agaricus bisporus (Lange) Pilat, the cultivated mushroom. It was unsuitable up to one year from deposition due largely to the inhibitory effect of its salt content on fruiting. Material eighteen months or more in age gave yields comparable to standard peat casing. Before use as a casing the material must be shredded to a satisfactory structure, neutralised with chalk, and pasteurised to eliminate organisms harmful to the crop. The prepared medium has a high water holding capacity and a structure resilient to management procedures, important requirements of a good casing. A passive movement of salts from the compost to the casing was shown to occur during culture, capable of enhancing the natural decline in cropping if sufficiently great. The ions chloride, potassium, sodium and sulphate were shown to be responsible, their damaging effects being due to high conductivity created in the casing. Studies of elements available during culture suggested phosphate availability in the compost could limit crop potential, whilst iron released by mycelium of A.bisporus in the casing may be utilised by associated micro-organisms.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This thesis examines the "state of the art" of product innovation in new technology In the UK. The roles in innovation attributed to small and large firms are examined. Growing attention is being focused upon the small firm sector as a seedbed for Innovation and government policy has been changing to encourage the entrepreneurial new technology based firm (NTBF). The novel perspective of this research results from working in such a firm. It provides a longitudinal study of the management of innovation in conjunction with the corporate strategy of the firm. Given that the researcher was a participant and observer in the firm studied, the research is akin to action research in methodology but is better described as grounded theory. Theoretical concepts are drawn from the prescriptive literature describing corporate strategy, and from the empirical literature which has evaluated new product success and failure. Models of the Innovation process are discussed and appropriate strategies and reasons for product innovation failure in NTBFs are described. The strategy, structure and new product development progress of the company are examined, using both the researcher's observations and company documents. This provides information on the methods and practices adopted for product innovation in a NTBF. The thesis analyses the performance of the firm In terms of product innovation. The models and strategies derived from the literature are then tested in the light of the experience of the company. Conclusions are drawn regarding strategies for innovation in NTBFs and about the innovation process in general. The importance of a NTBF adopting a synergistic strategy is shown. Links are established between the existence of synergy in the strategy and coupling in the management of innovation. Innovation is shown to be a laterally interdisciplinary exercise and therefore the "pipeline model" Is criticised. Finally a set of guidelines Is produced for the managers of NTBFs.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This thesis is concerned with the management of product innovation inside the medium size, mature, manufacturing company. An academic perspective of innovation is integrated with an account of direct participation acquired over a two year period. The emergent synthesis provides fresh insight into some of the problems associated with producing and sustaining innovation. Product innovation is a very complex activity, and it presents particular difficulties for mature industry. However, the ability to innovate is fundamental to a company's continued survival. Three aspects of product innovation are examined in detail. Firstly, is the requirement to separate innovation activity from the on-going business interests; dependency between the degree of separation and novelty is supported. Secondly, a simple sequential model of the innovation process is tested and shown to be of considerable practical value. Thirdly a relationship is established between the age of the recipient market and the type of innovation to be found in that market All three aspects are found to have important implications for management in their pursuit of innovation. Management deficiencies which inhibited the successful resolution of innovation-linked problems are described and solutions which stress the need for commitment and coherency are proposed. The long existing management structure in the mature company which mitigates against successful and continuing innovation are examined in detail and a strategy is evolved which uses the intrinsic strengths of the mature company to promote innovation of a kind compatible with success in the market. A set of guidelines of practical value is presented for those managers wishing to pursue, and sustain, product innovation in the medium size mature company.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This thesis is related to the subject of technical innovation, specifically to the activity of design in microenterprises operating in less industrialised economies. Design here is understood as a process, which is not the sole domain of formally trained categories such as engineers, architects or industrial designers. The 'professional boundary' discussion in this investigation is perceived as secondary as, in this context, products are designed, copied or adapted by workers, entrepreneurs themselves, or directly by the poor community. Design capacity at this level is considered to be important both in relation to the conception of capital and consumer goods and to the building up of technical knowledge. Although professional design emerged in Latin America little over three decades ago, this activity has remained marginalised throughout industry. Design activity tends to be concentrated in some product categories in the formalised industrial sector. For microenterprises operating informally, industrial design appears to be unknown. The existing literature pays little attention to 'informal design' capacity. Other areas of knowledge, such as development economies, recognise the importance of microenterprises and technological capability but neglect the potential role of industrial design in small manufacturing units. The management literature, though it focuses on technical innovation and design, has also paid little attention to 'informal design'. In less industrialised economies this neglect is felt by the lack of programmes specifically tailored to create or stimulate 'informal design'. There is a need for recognition of 'informal design' capacity and for the implementation of programmes which specifically target design as a central activity in the manufacturing firm, independent of their size and technological capability. Addressing 'design by the poor for the poor', requires a down-to-earth approach.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Using a hydraulic equipment manufacturing plant as the case study, this work explores the problems of systems integration in manufacturing systems design, stressing the behavioural aspects of motivation and participation, and the constraints involved in the proper consideration of the human sub-system. The need for a simple manageable modular organisation structure is illustrated, where it is shown, by reference to systems theory, how a business can be split into semi-autonomous operating units. The theme is the development of a manufacturing system based on an analysis of the business, its market, product, technology and constraints, coupled with a critical survey of modern management literature to develop an integrated systems design to suit a specific company in the current social environment. Society currently moves through a socio-technical revolution with man seeking higher levels of motivation. The transitory environment from an autocratic/paternalistic to a participative operating mode demands systems parameters only found to a limited extent in manufacturing systems today. It is claimed, that modern manufacturing systems design needs to be based on group working, job enrichment, delegation of decision making and reduced job monotony. The analysis shows how negative aspects of cellular manufacture such as lack of flexibility and poor fixed asset utilisation are relatively irrelevant and misleading in the broader context of the need to come to terms with the social stresses imposed on a company operating in the industrial environment of the present and the immediate future.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Product Service Systems (PSSs) emphasize the substitution of products with services. The term “Servitisation” was introduced by Sandra Vendermerwe in the 80s to represent the addition of services to increase a company’s competitive edge. Key to PSS, and Servitisation more generally, is the “informated product”. The informated product enables health monitoring of the product in use and can be key to a workable PSS. This paper reviews the evolution of servitisation and the associated business benefit. It also then reviews the concept of informated product reconfiguration techniques and remote services that enables PSS to be delivered.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Students at Cranfield Manufacturing Systems Centre helped Brompton Bikes formulate a strategy to meet rapid sales growth. The students took up Operations Excellence MSc, a two-year part-time programme based on the Cranfield MSc in Engineering and Management of Manufacturing Systems, include the Realising Competitive Manufacture module, which is set out to consolidate and embed the knowledge and skills developed throughout the two-year programme. Guided by StratNav process, the students analysed the product families of Brompton, established the basis on which they compete in the market place, and then benchmarked against key competitors. The top five developments identified to be needed by Brompton are: the formation of group technology cells, creation of a robotic brazing facility, and training and recruitment initiatives for production staff.

Relevância:

30.00% 30.00%

Publicador:

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pyrolysis is an energy conversion technology which by heating organic materials in the absence of oxygen, produces liquid, gaseous, and solid fuel products. Biochar, the solid product, can also be used as a soil amendment and, simultaneously, enables us to sequester carbon in the soil. By controlling the pyrolysis process, it is possible to engineer biochar suitable for the remediation of specific soil management problems. This research uses a characterization method more suited to producing biochar for soil amendment purposes than the existing biochar fuel characterization standards. This is the first research to use wastewater irrigated willow as a pyrolysis feedstock. The extensive characterization of biochar produced over a range of temperatures (410-810°C) yielded data on key properties relevant to soil under management: low surface area (1.4 to 5.4 m2/g), low bulk density (0.15-0.18 g/cm3), high pH values (7.8-9.4) and high water-holding capacity (1.8 to 4.3 cm3/g). Extraction experiments demonstrated low bioavailability of char nutrients (N, P, K, Ca, and Mg). This research also studied this artificial nitrogen cycle of pyrolysis: nitrogen accumulated in the wood from the wastewater and high levels of nitrogen remained in the biochar in a stable form not directly available to plants. Copyright © 2013 American Institute of Chemical Engineers Environ Prog.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A view has emerged within manufacturing and service organizations that the operations management function can hold the key to achieving competitive edge. This has recently been emphasized by the demands for greater variety and higher quality which must be set against a background of increasing cost of resources. As nations' trade barriers are progressively lowered and removed, so producers of goods and service products are becoming more exposed to competition that may come from virtually anywhere around the world. To simply survive in this climate many organizations have found it necessary to improve their manufacturing or service delivery systems. To become real ''winners'' some have adopted a strategic approach to operations and completely reviewed and restructured their approach to production system design and operations planning and control. The articles in this issue of the International journal of Operations & Production Management have been selected to illustrate current thinking and practice in relation to this situation. They are all based on papers presented to the Sixth International Conference of the Operations Management Association-UK which was held at Aston University in June 1991. The theme of the conference was "Achieving Competitive Edge" and authors from 15 countries around the world contributed to more than 80 presented papers. Within this special issue five topic areas are addressed with two articles relating to each. The topics are: strategic management of operations; managing change; production system design; production control; and service operations. Under strategic management of operations De Toni, Filippini and Forza propose a conceptual model which considers the performance of an operating system as a source of competitive advantage through the ''operation value chain'' of design, purchasing, production and distribution. Their model is set within the context of the tendency towards globalization. New's article is somewhat in contrast to the more fashionable literature on operations strategy. It challenges the validity of the current idea of ''world-class manufacturing'' and, instead, urges a reconsideration of the view that strategic ''trade-offs'' are necessary to achieve a competitive edge. The importance of managing change has for some time been recognized within the field of organization studies but its relevance in operations management is now being realized. Berger considers the use of "organization design", ''sociotechnical systems'' and change strategies and contrasts these with the more recent idea of the ''dialogue perspective''. A tentative model is suggested to improve the analysis of different strategies in a situation specific context. Neely and Wilson look at an essential prerequisite if change is to be effected in an efficient way, namely product goal congruence. Using a case study as its basis, their article suggests a method of measuring goal congruence as a means of identifying the extent to which key performance criteria relating to quality, time, cost and flexibility are understood within an organization. The two articles on production systems design represent important contributions to the debate on flexible production organization and autonomous group working. Rosander uses the results from cases to test the applicability of ''flow groups'' as the optimal way of organizing batch production. Schuring also examines cases to determine the reasons behind the adoption of ''autonomous work groups'' in The Netherlands and Sweden. Both these contributions help to provide a greater understanding of the production philosophies which have emerged as alternatives to more conventional systems -------for intermittent and continuous production. The production control articles are both concerned with the concepts of ''push'' and ''pull'' which are the two broad approaches to material planning and control. Hirakawa, Hoshino and Katayama have developed a hybrid model, suitable for multistage manufacturing processes, which combines the benefits of both systems. They discuss the theoretical arguments in support of the system and illustrate its performance with numerical studies. Slack and Correa's concern is with the flexibility characteristics of push and pull material planning and control systems. They use the case of two plants using the different systems to compare their performance within a number of predefined flexibility types. The two final contributions on service operations are complementary. The article by Voss really relates to manufacturing but examines the application of service industry concepts within the UK manufacturing sector. His studies in a number of companies support the idea of the ''service factory'' and offer a new perspective for manufacturing. Harvey's contribution by contrast, is concerned with the application of operations management principles in the delivery of professional services. Using the case of social-service provision in Canada, it demonstrates how concepts such as ''just-in-time'' can be used to improve service performance. The ten articles in this special issue of the journal address a wide range of issues and situations. Their common aspect is that, together, they demonstrate the extent to which competitiveness can be improved via the application of operations management concepts and techniques.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A comprehensive introduction to the technology, development and management of business information systems. The book assumes no prior knowledge of IS or IT, so that new concepts and terms are defined as clearly as possible, with explanations in the text, and definitions at the margin. In this fast-moving area, the book covers both the crucial underpinnings of the subject as well as the most recent business and technology applications.It is written for students on any IS, BIS or MIS course from undergraduate to postgraduate and MBA level within a Business or Computer Science Department - See more at: http://catalogue.pearsoned.ca/educator/product/Business-Information-Systems-Technology-Development-and-Management-for-the-EBusiness/9780273716624.page#sthash.LgAheK57.dpuf

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The primary aim of this research is to understand what constitutes management accounting and control (MACs) practice and how these control processes are implicated in the day to day work practices and operations of the organisation. It also examines the changes that happen in MACs practices over time as multiple actors within organisational settings interact with each other. I adopt a distinctive practice theory approach (i.e. sociomateriality) and the concept of imbrication in this research to show that MACs practices emerge from the entanglement between human/social agency and material/technological agency within an organisation. Changes in the pattern of MACs practices happens in imbrication processes which are produced as the two agencies entangle. The theoretical approach employed in this research offers an interesting and valuable lens which seeks to reveal the depth of these interactions and uncover the way in which the social and material imbricate. The theoretical framework helps to reveal how these constructions impact on and produce modifications of MACs practices. The exploration of the control practices at different hierarchical levels (i.e. from the operational to middle management and senior level management) using the concept of imbrication process also maps the dynamic flow of controls from operational to top management and vice versa in the organisation. The empirical data which is the focus of this research has been gathered from a case study of an organisation involved in a large vertically integrated palm oil industry company in Malaysia specifically the refinery sector. The palm oil industry is a significant industry in Malaysia as it contributed an average of 4.5% of Malaysian Gross Domestic Product, over the period 1990 -2010. The Malaysian palm oil industry also has a significant presence in global food oil supply where it contributed 26% of the total oils and fats global trade in 2010. The case organisation is a significant contributor to the Malaysian palm oil industry. The research access has provided an interesting opportunity to explore the interactions between different groups of people and material/technology in a relatively heavy process food industry setting. My research examines how these interactions shape and are shaped by control practices in a dynamic cycle of imbrications over both short and medium time periods.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This research has been undertaken to determine how successful multi-organisational enterprise strategy is reliant on the correct type of Enterprise Resource Planning (ERP) information systems being used. However there appears to be a dearth of research as regards strategic alignment between ERP systems development and multi-organisational enterprise governance as guidelines and frameworks to assist practitioners in making decision for multi-organisational collaboration supported by different types of ERP systems are still missing from theoretical and empirical perspectives. This calls for this research which investigates ERP systems development and emerging practices in the management of multi-organisational enterprises (i.e. parts of companies working with parts of other companies to deliver complex product-service systems) and identify how different ERP systems fit into different multi-organisational enterprise structures, in order to achieve sustainable competitive success. An empirical inductive study was conducted using the Grounded Theory-based methodological approach based on successful manufacturing and service companies in the UK and China. This involved an initial pre-study literature review, data collection via 48 semi-structured interviews with 8 companies delivering complex products and services across organisational boundaries whilst adopting ERP systems to support their collaborative business strategies – 4 cases cover printing, semiconductor manufacturing, and parcel distribution industries in the UK and 4 cases cover crane manufacturing, concrete production, and banking industries in China in order to form a set of 29 tentative propositions that have been validated via a questionnaire receiving 116 responses from 16 companies. The research has resulted in the consolidation of the validated propositions into a novel concept referred to as the ‘Dynamic Enterprise Reference Grid for ERP’ (DERG-ERP) which draws from multiple theoretical perspectives. The core of the DERG-ERP concept is a contingency management framework which indicates that different multi-organisational enterprise paradigms and the supporting ERP information systems are not the result of different strategies, but are best considered part of a strategic continuum with the same overall business purpose of multi-organisational cooperation. At different times and circumstances in a partnership lifecycle firms may prefer particular multi-organisational enterprise structures and the use of different types of ERP systems to satisfy business requirements. Thus the DERG-ERP concept helps decision makers in selecting, managing and co-developing the most appropriate multi-organistional enterprise strategy and its corresponding ERP systems by drawing on core competence, expected competitiveness, and information systems strategic capabilities as the main contingency factors. Specifically, this research suggests that traditional ERP(I) systems are associated with Vertically Integrated Enterprise (VIE); whilst ERPIIsystems can be correlated to Extended Enterprise (EE) requirements and ERPIII systems can best support the operations of Virtual Enterprise (VE). The contribution of this thesis is threefold. Firstly, this work contributes to a gap in the extant literature about the best fit between ERP system types and multi-organisational enterprise structure types; and proposes a new contingency framework – the DERG-ERP, which can be used to explain how and why enterprise managers need to change and adapt their ERP information systems in response to changing business and operational requirements. Secondly, with respect to a priori theoretical models, the new DERG-ERP has furthered multi-organisational enterprise management thinking by incorporating information system strategy, rather than purely focusing on strategy, structural, and operational aspects of enterprise design and management. Simultaneously, the DERG-ERP makes theoretical contributions to the current IS Strategy Formulation Model which does not explicitly address multi-organisational enterprise governance. Thirdly, this research clarifies and emphasises the new concept and ideas of future ERP systems (referred to as ERPIII) that are inadequately covered in the extant literature. The novel DERG-ERP concept and its elements have also been applied to 8 empirical cases to serve as a practical guide for ERP vendors, information systems management, and operations managers hoping to grow and sustain their competitive advantage with respect to effective enterprise strategy, enterprise structures, and ERP systems use; referred to in this thesis as the “enterprisation of operations”.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Due to vigorous globalisation and product proliferation in recent years, more waste has been produced by the soaring manufacturing activities. This has contributed to the significant need for an efficient waste management system to ensure, with all efforts, the waste is properly treated for recycling or disposed. This paper presents a Decision Support System (DSS) framework, based on Constraint Logic Programming (CLP), for the collection management of industrial waste (of all kinds) and discusses the potential employment of Radio-Frequency Identification Technology (RFID) to improve several critical procedures involved in managing waste collection. This paper also demonstrates a widely distributed and semi-structured network of waste producing enterprises (e.g. manufacturers) and waste processing enterprises (i.e. waste recycling/treatment stations) improving their operations planning by means of using the proposed DSS. The potential RFID applications to update and validate information in a continuous manner to bring value-added benefits to the waste collection business are also presented. © 2012 Inderscience Enterprises Ltd.