Effect of solvent hydration and temperature in the deacidification process of sunflower oil using ethanol

This work presents liquid-liquid experimental data for systems composed of sunflower seed oil, ethanol and water from 10 to 60 degrees C. The influence of process variables (temperature (T) and water concentration in the solvent (W)) on both the solvent content present in the raffinate (S(RP)) and extract (S(EP)) phases and the partition of free fatty acids (k(2)) was evaluated using the response surface methodology, where flash calculations were performed for each trial using the UNIQUAC equation. Water content in the solvent was the most important factor on the responses of S(EP) and k(2). Additionally, statistical analysis showed that the S(RP) was predominantly affected by temperature factor for low water content in the solvent. (c) 2009 Elsevier Ltd. All rights reserved.

Prediction of dynamical, nonlinear, and unstable process behavior

Process scheduling techniques consider the current load situation to allocate computing resources. Those techniques make approximations such as the average of communication, processing, and memory access to improve the process scheduling, although processes may present different behaviors during their whole execution. They may start with high communication requirements and later just processing. By discovering how processes behave over time, we believe it is possible to improve the resource allocation. This has motivated this paper which adopts chaos theory concepts and nonlinear prediction techniques in order to model and predict process behavior. Results confirm the radial basis function technique which presents good predictions and also low processing demands show what is essential in a real distributed environment.

Tetragonal-cubic phase boundary in nanocrystalline ZrO(2)-Y(2)O(3) solid solutions synthesized by gel-combustion

By means of synchrotron X-ray powder diffraction (SXPD) and Raman spectroscopy, we have detected, in a series of nanocrystalline and compositionally homogeneous ZrO(2)-Y(2)O(3) solid solutions, the presence at room temperature of three different phases depending on Y(2)O(3) content, namely two tetragonal forms and the cubic phase. The studied materials, with average crystallite sizes within the range 7-10 nm, were synthesized by a nitrate-citrate gel-combustion process. The crystal structure of these phases was also investigated by SXPD. The results presented here indicate that the studied nanocrystalline ZrO(2)-Y(2)O(3) solid solutions exhibit the same phases reported in the literature for compositionally homogeneous materials containing larger (micro)crystals. The compositional boundaries between both tetragonal forms and between tetragonal and cubic phases were also determined. (C) 2011 Elsevier B.V. All rights reserved.

An investigation of the activation process of high temperature shift catalyst

The aim of this work is to address the activation process of a high temperature shift (HTS) catalyst, composed of Fe2O3/Cr2O3/CuO, by analyzing it before activation (HTS-V) and after activation (HTS-A) using complementary characterization techniques. The textural and morphological characterizations were done by transmission electron rnicroscopy (TEM) and nitrogen physisorption at 77 K; crystallographic structure was confirmed by X-ray diffraction (XRD); electronic structure was analyzed by X-ray absorption spectroscopy (XAS) and the chemical composition of the catalyst`s surface was obtained by X-ray photoelectron spectroscopy (XPS). The investigation pointed out that the HTS-V catalyst presents good textural and morphological properties, which are not deeply affected by the activation process (sample HTS-A). The iron oxide phase in the HTS-V catalyst is hematite whereas in HTS-A catalyst is magnetite with Fe2+/Fe3+ ratio close to the expected value (0.5). For both samples, the Cr ions seem to be incorporated in the iron oxide lattice with higher concentration at particle surface. In the HTS-V catalyst, the Cu ions have oxidation number II and occupy in average distorted octahedral sites; after the activation, the Cu ions are partially reduced, suggesting that the reduction of the Cu species is complex. (C) 2007 Elsevier B.V. All rights reserved.

Removal of phenol in high salinity media by a hybrid process (activated sludge plus photocatalysis)

The degradation of phenol by a hybrid process (activated sludge + photocatalysis) in a high salinity medium (50 g L-1 of chloride) has been investigated. The sludge used from a municipal wastewater facility was adapted to the high salt concentrations prior to use. The photocatalytic conditions were optimized by means of a factorial experimental design. TiO2 P25 from Degussa was used as the photocatalyst. The initial phenol concentration was approximately 200 mg L-1 and complete removal of phenol and a mineralization degree above 98% were achieved within 25 h of treatment (24 h of biological treatment and I h of photocatalysis). From HPLC analyses, five hydroxylated intermediates formed during oxidation have been identified. The main ones were catechol and hydroquinone, followed by 1,2,4-benzenetriol, 2-hydroxy- 1,4-benzoquinone, and pyrogallol, in this order. No formation of organochlorine compounds was observed. Therefore, the proposed hybrid process showed itself to be suited to treat phenol in the presence of high contents of salt. (c) 2007 Elsevier B.V. All rights reserved.

Understanding Wax Printing: A Simple Micropatterning Process for Paper-Based Microfluidics

This technical note describes a detailed study on wax printing, a simple and inexpensive method for fabricating microfluidic devices in paper using a commercially available printer and hot plate. The printer prints patterns of solid wax on the surface of the paper, and the hot plate melts the wax so that it penetrates the full thickness of the paper. This process creates complete hydrophobic barriers in paper that define hydrophilic channels, fluid reservoirs, and reaction zones. The design of each device was based on a simple equation that accounts for the spreading of molten wax in paper.

European Solar Engineering School ESES : Past and Future

The European Solar Engineering School ESES is a one-year masters program that started in 1999 at the Solar Energy Research Center SERC, Dalarna University College. It has been growing in popularity over the years, with over 20 students in the current year. Approximately half the students come from Europe, the rest coming from all over the globe. This paper described the contents and experiences from seven years of running the programme and the plans for adapting the programme to the Bologna process. The majority of the students from ESES have found work in the solar industry, energy industry or taken up PhD positions. An alumni group has been started that actively gives support to past, present and potential future students.

Improvement of Routine Test Process of High Voltage Power Capacitors

The capacitor test process at ABB Capacitors in Ludvika must be improved to meet future demands for high voltage products. To find a solution to how to improve the test process, an investigation was performed to establish which parts of the process are used and how they operate. Several parts which can improves the process were identified. One of them was selected to be improved in correlation with the subject, mechanical engineering. Four concepts were generated and decision matrixes were used to systematically select the best concept. By improving the process several benefits has been added to the process. More units are able to be tested and lead time is reduced. As the lead time is reduced the cost for each unit is reduced, workers will work less hours for the same amount of tested units, future work to further improve the process is also identified. The selected concept was concept 1, the sway stop concept. This concept is used to reduce the sway of the capacitors as they have entered the test facility, the box. By improving this part of the test process a time saving of 20 seconds per unit can be achieved, equivalent to 7% time reduction. This can be compared to an additional 1400 units each year.

The role of entrepreneurial networking on internationalization of a micro-sized Born Global Swedish fashion company : A narrative ethnographic research

Background: In recent studies a lot of attention is drawn to the connection between networking and entrepreneurship. Many scholars consider successful business and networking inseparable. Taking into consideration the topicality of the two notions discussed above the authors of this thesis decided to conduct the research dedicated to these phenomena in the field that interests them most – in the field of Swedish fashion. Purpose: The purpose of the thesis is to gain a deeper insight into entrepreneur’s experiences to point out the role of entrepreneurial networking in the process of internationalization of a micro-sized Swedish fashion company and to contribute to the research in this field by telling its unique story. Method: To achieve the purpose of the research a narrative ethnographic research was conducted. This research strategy was chosen because it suits the purpose best by giving an opportunity to get fresh insights into the field of entrepreneurial networking from the point of view of the entrepreneur. The data collected has a narrative nature therefore narrative analysis is used to present it. The methods of gathering the data are face-to-face interview and documents. Conclusion: we can define the most important role of entrepreneurial networking on the internationalization process of Odeur as an effective accelerator and a tool to fulfil the knowledge and expertise gaps in certain areas through other actors in the network.

Experimental and computational investigation of the roll forming process

One of the first questions to consider when designing a new roll forming line is the number of forming steps required to produce a profile. The number depends on material properties, the cross-section geometry and tolerance requirements, but the tool designer also wants to minimize the number of forming steps in order to reduce the investment costs for the customer. There are several computer aided engineering systems on the market that can assist the tool designing process. These include more or less simple formulas to predict deformation during forming as well as the number of forming steps. In recent years it has also become possible to use finite element analysis for the design of roll forming processes. The objective of the work presented in this thesis was to answer the following question: How should the roll forming process be designed for complex geometries and/or high strength steels? The work approach included both literature studies as well as experimental and modelling work. The experimental part gave direct insight into the process and was also used to develop and validate models of the process. Starting with simple geometries and standard steels the work progressed to more complex profiles of variable depth and width, made of high strength steels. The results obtained are published in seven papers appended to this thesis. In the first study (see paper 1) a finite element model for investigating the roll forming of a U-profile was built. It was used to investigate the effect on longitudinal peak membrane strain and deformation length when yield strength increases, see paper 2 and 3. The simulations showed that the peak strain decreases whereas the deformation length increases when the yield strength increases. The studies described in paper 4 and 5 measured roll load, roll torque, springback and strain history during the U-profile forming process. The measurement results were used to validate the finite element model in paper 1. The results presented in paper 6 shows that the formability of stainless steel (e.g. AISI 301), that in the cold rolled condition has a large martensite fraction, can be substantially increased by heating the bending zone. The heated area will then become austenitic and ductile before the roll forming. Thanks to the phenomenon of strain induced martensite formation, the steel will regain the martensite content and its strength during the subsequent plastic straining. Finally, a new tooling concept for profiles with variable cross-sections is presented in paper 7. The overall conclusions of the present work are that today, it is possible to successfully develop profiles of complex geometries (3D roll forming) in high strength steels and that finite element simulation can be a useful tool in the design of the roll forming process.

Automating the product derivation process of multi-agent systems product lines

Agent-oriented software engineering and software product lines are two promising software engineering techniques. Recent research work has been exploring their integration, namely multi-agent systems product lines (MAS-PLs), to promote reuse and variability management in the context of complex software systems. However, current product derivation approaches do not provide specific mechanisms to deal with MAS-PLs. This is essential because they typically encompass several concerns (e.g., trust, coordination, transaction, state persistence) that are constructed on the basis of heterogeneous technologies (e.g., object-oriented frameworks and platforms). In this paper, we propose the use of multi-level models to support the configuration knowledge specification and automatic product derivation of MAS-PLs. Our approach provides an agent-specific architecture model that uses abstractions and instantiation rules that are relevant to this application domain. In order to evaluate the feasibility and effectiveness of the proposed approach, we have implemented it as an extension of an existing product derivation tool, called GenArch. The approach has also been evaluated through the automatic instantiation of two MAS-PLs, demonstrating its potential and benefits to product derivation and configuration knowledge specification.

O uso comercial da internet por micro, pequenas e médias empresas de Porto Alegre : um estudo exploratório sobre as empresas do trade point Porto Alegre

Uma grande evolução aconteceu no mundo com o surgimento da Internet. Ela causou um espantoso aumento das comunicações, que passaram a ser em tempo real e com uma abrangência mundial. Foi a democratização da informação. A Internet serve como uma grande ferramenta para as empresas, principalmente com a globalização dos mercados, fenômeno que cresce cada dia mais e atinge a todos. A globalização fez com que as organizações se tornassem globais, e a Internet funciona como um elo de ligação entre empresas, fornecedores e consumidores. Este trabalho consistiu na realização de uma pesquisa survey exploratória com o objetivo de verificar e descrever o uso potencial da Internet como ferramenta de auxílio à realização de negócios de caráter global, nas micro, pequenas e médias empresas de Porto Alegre. A amostra das empresas pesquisadas foi extraída do Trade Point Porto Alegre, por ser essa uma entidade que tem por objetivo auxiliar as empresas a realizarem operações globais. Com relação ao mercado global, o trabalho identificou que quase todas as empresas acreditam que ele tenha oportunidades de negócios. Os principais meios para entrar nesse mercado são a participação em feiras e rodadas de negócios, contato pessoal e o Trade Point. A Internet já está disseminada no meio empresarial, todas as empresas já a conhecem, e boa parte das empresas realizam operações que podem ser auxiliadas pela rede, como comunicação, promoção de produtos e acompanhamento pós-venda. Identificou-se que as microempresas são as que menos acreditam no mercado internacional, mas apontaram que a Internet pode ajudá-las em suas atividades. Já as pequenas empresas são as que atuam no mercado internacional e acreditam que a Internet possa ajudá-las em algumas atividades. Por fim, as médias empresas, também atuam no mercado internacional, principalmente com as exportações, e são as que já estão utilizando a Internet. O Trade Point se mostrou um serviço bem requisitado pelas empresas, principalmente as que atuam com o comércio internacional. As principais vantagens citadas foram a centralização de informações e a geração de novos negócios.

A abertura comercial brasileira e o impacto no processo gerencial das micro e pequenas empresas do setor de confecção do Espírito Santo

ESTA MONOGRAFIA OBJETIVOU IDENTIFICAR ATÉ QUE PONTO A ABERTURA DO MERCADO BRASILEIRO AFETOU O PROCESSO GERENCIAL DAS MICRO E PEQUENAS EMPRESAS DO SETOR DE CONFECÇÃO DO ESPÍRITO SANTO. UTILIZOU-SE METODOLOGIA DIVERSIFICADA CONSISTENTE DE REVISÃO BIBLIOGRÁFICA SOBRE O TEMA, ANÁLISE E INTERPRETAÇÃO DE DADOS FORNECIDOS PELO SEBRAE-ES, IBGE E UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO (UFES) E PESQUISA DE CAMPO EM QUE FORAM ENTREVISTADOS EMPRESÁRIOS DO SETOR DE CONFECÇÃO EM MUNICÍPIOS DO ESTADO. PELO ESTUDO, CONCLUI-SE QUE: O PROCESSO DE GLOBALIZAÇÃO TEM AFETADO A ECONOMIA BRASILEIRA E, PARTICULARMENTE, A CAPIXABA; EM RELAÇÃO AO SETOR DE CONFECÇÃO, O IMPACTO DA GLOBALIZAÇÃO NÃO TEM SIDO ACENTUADO; E O PROCESSO GERENCIAL DAS MICRO E PEQUENAS EMPRESAS DO RAMO DE CONFECÇÃO NO ESTADO, SURGIU COMO UMA DAS PRINCIPAIS CAUSAS DA FRAGILIDADE E INEFICÁCIA DO SETOR, TORNANDO-SE INADIÁVEIS E IMPERATIVAS AÇÕES QUE PROPICIEM O DESENVOLVIMENTO GERENCIAL, A FIM DE PERMITIR-LHE CONTRIBUIR PARA A DISTRIBUIÇÃO SOCIAL DOS MEIOS DE PRODUÇÃO.

Planejamento estratégico: aplicação nas micro e pequenas empresas

The Strategic Planning is the managerial process that it makes possible to establish one heading for being followed by the company, with views to obtain an optimization level in this relationship with the external atmosphere. In the small company¿s improvement the general performance of the results and the use of resources, however it is still little known and used. These organizations need administration tools to be capable to promote the business growth and to guarantee the survival more and more in this market competitive. This way, it is done necessary to approach the strategic planning in a complex less way and the objective of this research is to provide larger knowledge regarding the Strategic Planning in the personal computer and small companies, to verify the limitations in the implantation, to analyze the reasons for the low effectiveness of the use in companies of this load and to identify the consultants interviewees close to the best way to implant it. The understanding of these limitations aids the small intrepreneur and the consultant in the implantation of the strategic planning as increment of competitiveness as this use provides reflections, guidelines for the activities of the organization, as well as it makes possible adaptation and answer capacity to the changes of the market.