Modeling of a solid-state bipolar blumlein generator for N stages

This paper models an n-stage stacked Blumlein generator for bipolar pulses for various load conditions. Calculation of the voltage amplitudes in time domain at the load and between stages is described for an n-stage generator. For this, the reflection and transmission coefficients are mathematically modeled where impedance discontinuity occurs (i.e., at the junctions between two transmission lines). The mathematical model developed is assessed by comparing simulation results to experimental data from a two-stage Blumlein solid-state prototype.

Designing market-based instruments for biodiversity conservation: learning with the Australian experience and evaluating Portugal's potential

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente, perfil Gestão de Sistemas Ambientais

Numerical 3D modeling of heat transfer in human tissues for microwave radiometry monitoring of Brown fat metabolismo

Background: Brown adipose tissue (BAT) plays an important role in whole body metabolism and could potentially mediate weight gain and insulin sensitivity. Although some imaging techniques allow BAT detection, there are currently no viable methods for continuous acquisition of BAT energy expenditure. We present a non-invasive technique for long term monitoring of BAT metabolism using microwave radiometry. Methods: A multilayer 3D computational model was created in HFSS™ with 1.5 mm skin, 3-10 mm subcutaneous fat, 200 mm muscle and a BAT region (2-6 cm3) located between fat and muscle. Based on this model, a log-spiral antenna was designed and optimized to maximize reception of thermal emissions from the target (BAT). The power absorption patterns calculated in HFSS™ were combined with simulated thermal distributions computed in COMSOL® to predict radiometric signal measured from an ultra-low-noise microwave radiometer. The power received by the antenna was characterized as a function of different levels of BAT metabolism under cold and noradrenergic stimulation. Results: The optimized frequency band was 1.5-2.2 GHz, with averaged antenna efficiency of 19%. The simulated power received by the radiometric antenna increased 2-9 mdBm (noradrenergic stimulus) and 4-15 mdBm (cold stimulus) corresponding to increased 15-fold BAT metabolism. Conclusions: Results demonstrated the ability to detect thermal radiation from small volumes (2-6 cm3) of BAT located up to 12 mm deep and to monitor small changes (0.5°C) in BAT metabolism. As such, the developed miniature radiometric antenna sensor appears suitable for non-invasive long term monitoring of BAT metabolism.

Modeling radionuclides dispersion and deposition downwind of a coal-fired power plant

In this study the inhalation doses and respective risk are calculated for the population living within a 20 km radius of a coal-fired power plant. The dispersion and deposition of natural radionuclides were simulated by a Gaussian dispersion model estimating the ground level activity concentration. The annual effective dose and total risk were 0.03205 mSv/y and 1.25 x 10-8, respectively. The effective dose is lower than the limit established by the ICRP and the risk is lower than the limit proposed by the U.S. EPA, which means that the considered exposure does not pose any risk for the public health.

Mathematical modeling and simulation of heat flow through pultrusion die assembly system for thermoset composites

Pultrusion is an industrial process used to produce glass fibers reinforced polymers profiles. These materials are worldwide used when performing characteristics, such as great electrical and magnetic insulation, high strength to weight ratio, corrosion and weather resistance, long service life and minimal maintenance are required. In this study, we present the results of the modelling and simulation of heat flow through a pultrusion die by means of Finite Element Analysis (FEA). The numerical simulation was calibrated based on temperature profiles computed from thermographic measurements carried out during pultrusion manufacturing process. Obtained results have shown a maximum deviation of 7%, which is considered to be acceptable for this type of analysis, and is below to the 10% value, previously specified as maximum deviation. © 2011, Advanced Engineering Solutions.

How to feel "in love" with Math - a MOOC experience

In the past few years we have witnessed the fast development of distance learning tools such as Open Educational Resources (OER) and Massive Open Online Courses (MOOCs). This paper presents the “Mathematics without STRESS” MOOC Project, which is a cooperation between four schools from the Polytechnic Institute of Oporto (IPP). The concepts of MOOC and their quickly growing popularity are presented and complemented by a discussion of some MOOC definitions. The process of the project development is demonstrated by focusing on used MOOC structure, as well as the several types of course materials produced. At last, is presented a short discussion about problems and challenges met throughout the project. It is also our goal to contribute for a change in the way as teaching and learning Mathematics is seen and practiced nowadays.

Motivations to participate in international trade fairs: the Portuguese experience

Motivations/barriers to participate in ITF

Miocene marine-continental correlations in the Lisbon area and some discussion related to personnal experience

Sandpit exploitation near Lisbon allowed collecting of many Miocene, non marine fossils. These sands are part of the mostly marine Miocene series in the Lower Tagus basin. The particularly favourable situation led several researchers to deal with marine-continental correlations. Difficulties often concern methodologic aspects. Some poorly based interpretations exerced a lasting influence. A critical approach is presented. Analysis requires data. Methods based upon models often lead to the temptation of fitting data in order to confirm a priori conclusions, or of mixing up data as if of equal statistic value while they have not at all the same weight. Erroneous interpretations' uncritical repetition for many years "upgraded" them into absolute truth. Another point is endemism vs. europeism. Miocene mammals from Lisbon compared well with corresponding French, contemporaneous taxa, while this was apparently not true for Spanish ones. Too much accent had been put on the endemic character of Spanish, or even regional, mammalian faunas. Nationalist bias and sensationalism also weigh, albeit negatively. Meanwhile nearly all the more evident examples as the rhinoceros Hispanotherium are discredited as Iberian endemisms. Taxa may appear as endemic just because they have not yet been found elsewhere. At least for the medium to large-sized mammals, with their huge geographic distribution, faunal differences depend much more on ecology, climate and environmental conditions. Emphasis on differences may also result from researchers that are often in a precarious situation and need very much to achieve short-term, preferably sensational results. Overvalued differences may mask real similarities. Unethic and not scientific behaviour are further enhanced by "nomina nuda" tricks that may simply be a way to circunvent or cheat the Priority Rule. On the other hand, access to communication networks may present as sensational novelties items that are not new at all, misleading the audience. A new class of "science people" arose, created by the media and not by the value of their real achievements. Discussion is presented on sedimentation processes and discontinuities that are often regarded as absolute precision dating tools, as well as on some geochemical and paleomagnetic interpretations. A very good chronologie frame has been obtained for the basin under study on the basis of an impressive set of data, providing a rather detailed and accurate frame for Miocene marine-continental correlations.

Overproduction of the english definitive article by portuguese learners: a cross-sectional study

The English article system is actually so complex that it presents many challenges for most non-native learners of English. The main difficulty of Portuguese learners, despite the numerous similarities between the two article systems, is noticeable in a marked tendency to produce the definite article where native speakers of English would not use it. This article reports the results of a cross-sectional study which examined the English definite article overproduction by a group of 12 Portuguese EFL learners with at least seven years of English instruction. The prediction is that these learners will exhibit evidence of transferring L1 features to their interlanguage when they overuse the definite article. The data were collected by means of a gap-filling task and a composition. The results found, as predicted, that these learners overused the in generic contexts. It is argued that this overuse is directly tied to and can be explained by transfer to somewhere and conceptual transfer principles.

A avaliação das barreiras na actividade profissional da pessoa com deficiência visual em Portugal: validação e adaptação do WES (work experience survey)

Resumo: Este estudo tem como finalidade validar e adaptar o WES (Work Experience Survey), de forma a avaliar e caracterizar a percepção que as pessoas DV portuguesas possuem sobre as barreiras ao emprego e as suas formas de resolução e/ou minimização. Da revisão da literatura, constatou-se a inexistência, a nível nacional, de estudos que versassem sobre as barreiras no acesso e manutenção de emprego e estratégias de superação. Este motivo foi o ponto a partir do qual se elaborou a adaptação e validação do questionário WES e a partir do qual alcançamos resultados e conclusões que nos remetem para evidências que a seguir se descrevem. Os dados recolhidos demonstram que esta faixa da população: tem baixos níveis de escolaridade; necessita de aperfeiçoar as suas competências para se tornar mais competitiva no mercado de trabalho; tem dificuldades na acessibilidade ao meio físico, devido às condições de acessibilidade oferecidas; enfrenta problemas no desempenho laboral, devido à falta de tecnologias de apoio e de meios de superação das barreiras no local de trabalho; e sente-se discriminada no acesso e manutenção do emprego, e progressão na carreira. A exploração das razões do insucesso escolar e do perfil de competências adequado, exigíveis para o emprego; o desenvolvimento de planos de promoção da carreira; a divulgação das competências e capacidades dos trabalhadores DV e a averiguação na aplicação da legislação referente à acessibilidade são algumas sugestões apresentadas.

Distributed controllers modeling through Petri nets with multi-asynchronous-channels

This paper proposes the concept of multi-asynchronous-channel for Petri nets. Petri nets extended with multi-asynchronous-channels and time-domains support the specification of distributed controllers, where each controller has a synchronous execution but the global system is asynchronous (globally-asynchronous locally-synchronous systems). Each multi-asynchronous-channel specify the interaction between two or more distributed controllers. These channels, together with the time-domain concept, ensure the creation of network-independent models to support implementations using heterogeneous communication networks. The created models support not only the systems documentation but also their validation and implementation through simulation tools, verification tools, and automatic code generators. An application example illustrates the use of a Petri net class extended with the proposed channels. © 2015 IEEE.

How to feel “in love” with math – a MOOC experience

In the past few years we have witnessed the fast development of distance learning tools such as Open Educational Resources (OER) and Massive Open Online Courses (MOOCs). This paper presents the “Mathematics without STRESS” MOOC Project, which is a cooperation between four schools from the Polytechnic Institute of Oporto (IPP). The concepts of MOOC and their quickly growing popularity are presented and complemented by a discussion of some MOOC definitions. The process of the project development is demonstrated by focusing on used MOOC structure, as well as the several types of course materials produced. At last, is presented a short discussion about problems and challenges met throughout the project. It is also our goal to contribute for a change in the way as teaching and learning Mathematics is seen and practiced nowadays.

Modern techniques for constraint solving the CASPER experience

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Informática, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

How to feel “in love" with math: a MOOC experience

In the past few years we have witnessed astonishing developments on distance learning tools, in particular on Open Educational Resources (OER) such as Massive Open Online Courses (MOOC). In this paper we present the “Mathematics without STRESS”, a MOOC Project, which has been a collaborative volunteer effort that brought together professors, from four schools of the Polytechnic Institute of Oporto (IPP), in Portugal. Some concepts directly associated with MOOC and their quickly growing popularity are complemented with a discussion of some particular MOOC characterizations. The design process of this project is revealed by focusing on the MOOC structure we used, as well as on the several types of course materials that were produced. At last, we undertake a short discussion about some of the problems, achievements and challenges met throughout this project development, giving a special attention to the motivational aim of this work - hoping to contribute to a change in the way of teaching and learning Mathematics is seen and practiced nowadays.

Mapping the quality of life experience in Alfama: a case study in Lisbon, Portugal.

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies.