Um modelo de projeto de layout para ambientes job shop com alta variedade de peças baseado nos conceitos da produção enxuta

Segundo Canem e Williamson (1998), o planejamento do layout é importante, pois normalmente representa os maiores e mais caros recursos da organização. Além disso, a localização e disposição física dos equipamentos no chão de fábrica têm impacto em diversos fatores como nível de estoque em processo, tamanho dos lotes de transferência, dificuldade no gerenciamento das atividades, movimentação de pessoas e produtos, entre outros. Portanto, o estudo de conceitos de arranjo físico e o desenvolvimento de modelos de projeto do layout, que visem a otimização dos recursos de produção, são de vital importância na busca pela melhoria dos sistemas produtivos. Neste contexto, este artigo apresenta um novo modelo de projeto de layout, para ambientes job shop com ampla variedade de peças. O modelo foi desenvolvido durante uma pesquisa de doutorado e foi aplicado em algumas empresas do setor metal mecânico. Os resultados obtidos comprovaram a eficiência do modelo projetado. O objetivo do modelo consiste em conduzir a equipe de projeto de layout a desenvolver alternativas de arranjo físico que estejam em consonância com conceitos e princípios da filosofia de produção enxuta. Vale ressaltar novamente que o modelo foi desenvolvido para ambientes com alta variedade de peças, ambientes esses em que, devido à dificuldade em se projetar o arranjo físico, as empresas terminam por adotar o layout funcional, conceito esse de arranjo físico que apresenta sérios problemas como excesso de transporte, altos níveis de estoques em processo, etc.

'Synthetic lipase' production from a newly isolated Sporidiobolus pararoseus strain by submerged fermentation

The lipase produced by a newly isolate Sporidiobolus pararoseus strain has potential catalysis ability for esterification reactions. In order to improve its synthetic activity, this work aimed at optimizing 'synthetic lipase' production by submerged fermentation of a conventional media based on peptone, yeast extract, NaCl and olive oil using experimental design technique. According to the results obtained in the first experimental design (2(4-1)), yeast extract and NaCl concentrations were tested to further optimization by response surface methodology. The maximum 'synthetic lipase' activity obtained was 26.9 U/mL in the optimized media (5.0, 6.8, 7.0 and 1.0% (wt/v) of peptone, yeast extract, NaCl and olive oil, respectively), representing a 6.36-fold increase compared to the initial medium. The time course of 'synthetic lipase' production in the optimized condition was evaluated in terms of synthetic activity, protease activity, biomass and total carbon and the maximum synthetic activity was observed during the stationary phase of growth.

The capability of endophytic fungi for production of hemicellulases and related enzymes

Abstract Background There is an imperative necessity for alternative sources of energy able to reduce the world dependence of fossil oil. One of the most successful options is ethanol obtained mainly from sugarcane and corn fermentation. The foremost residue from sugarcane industry is the bagasse, a rich lignocellulosic raw material uses for the production of ethanol second generation (2G). New cellulolytic and hemicellulytic enzymes are needed, in order to optimize the degradation of bagasse and production of ethanol 2G. Results The ability to produce hemicellulases and related enzymes, suitable for lignocellulosic biomass deconstruction, was explored using 110 endophytic fungi and 9 fungi isolated from spoiled books in Brazil. Two initial selections were performed, one employing the esculin gel diffusion assay, and the other by culturing on agar plate media with beechwood xylan and liquor from the hydrothermal pretreatment of sugar cane bagasse. A total of 56 isolates were then grown at 29°C on steam-exploded delignified sugar cane bagasse (DEB) plus soybean bran (SB) (3:1), with measurement of the xylanase, pectinase, β-glucosidase, CMCase, and FPase activities. Twelve strains were selected, and their enzyme extracts were assessed using different substrates. Finally, the best six strains were grown under xylan and pectin, and several glycohydrolases activities were also assessed. These strains were identified morphologically and by sequencing the internal transcribed spacer (ITS) regions and the partial β-tubulin gene (BT2). The best six strains were identified as Aspergillus niger DR02, Trichoderma atroviride DR17 and DR19, Alternaria sp. DR45, Annulohypoxylon stigyum DR47 and Talaromyces wortmannii DR49. These strains produced glycohydrolases with different profiles, and production was highly influenced by the carbon sources in the media. Conclusions The selected endophytic fungi Aspergillus niger DR02, Trichoderma atroviride DR17 and DR19, Alternaria sp. DR45, Annulohypoxylon stigyum DR47 and Talaromyces wortmannii DR49 are excellent producers of hydrolytic enzymes to be used as part of blends to decompose sugarcane biomass at industrial level.

Irreversibility by competition on a Glauber-Ising model by means of the entropy production.

An out of equilibrium Ising model subjected to an irreversible dynamics is analyzed by means of a stochastic dynamics, on a effort that aims to understand the observed critical behavior as consequence of the intrinsic microscopic characteristics. The study focus on the kinetic phase transitions that take place by assuming a lattice model with inversion symmetry and under the influence of two competing Glauber dynamics, intended to describe the stationary states using the entropy production, which characterize the system behavior and clarifies its reversibility conditions. Thus, it is considered a square lattice formed by two sublattices interconnected, each one of which is in contact with a heat bath at different temperature from the other. Analytical and numerical treatments are faced, using mean-field approximations and Monte Carlo simulations. For the one dimensional model exact results for the entropy production were obtained, though in this case the phase transition that takes place in the two dimensional counterpart is not observed, fact which is in accordance with the behavior shared by lattice models presenting inversion symmetry. Results found for the stationary state show a critical behavior of the same class as the equilibrium Ising model with a phase transition of the second order, which is evidenced by a divergence with an exponent µ ¼ 0:003 of the entropy production derivative.

Development of a supplier and purchase order management product/service under the 4PL logistics concept: a case study

Supply chain starts with a demand arisen and ends with material transport and delivery at its final destination. With this in mind, most of manufacturing, processors or distribution companies of consumer goods, spare parts and components for production, processing and finished goods, within national or international markets, may not have information and control over its supply chain performance. This article presents concept and logistics models evolution, purchase order and international supplier management, control tower and its logistics information systems. This also presents a real process implementation for a global high tech manufacturer company.

The capability of endophytic fungi for production of hemicellulases and related enzymes

Abstract BACKGROUND: There is an imperative necessity for alternative sources of energy able to reduce the world dependence of fossil oil. One of the most successful options is ethanol obtained mainly from sugarcane and corn fermentation. The foremost residue from sugarcane industry is the bagasse, a rich lignocellulosic raw material uses for the production of ethanol second generation (2G). New cellulolytic and hemicellulytic enzymes are needed, in order to optimize the degradation of bagasse and production of ethanol 2G. RESULTS: The ability to produce hemicellulases and related enzymes, suitable for lignocellulosic biomass deconstruction, was explored using 110 endophytic fungi and 9 fungi isolated from spoiled books in Brazil. Two initial selections were performed, one employing the esculin gel diffusion assay, and the other by culturing on agar plate media with beechwood xylan and liquor from the hydrothermal pretreatment of sugar cane bagasse. A total of 56 isolates were then grown at 29°C on steam-exploded delignified sugar cane bagasse (DEB) plus soybean bran (SB) (3:1), with measurement of the xylanase, pectinase, β-glucosidase, CMCase, and FPase activities. Twelve strains were selected, and their enzyme extracts were assessed using different substrates. Finally, the best six strains were grown under xylan and pectin, and several glycohydrolases activities were also assessed. These strains were identified morphologically and by sequencing the internal transcribed spacer (ITS) regions and the partial β-tubulin gene (BT2). The best six strains were identified as Aspergillus niger DR02, Trichoderma atroviride DR17 and DR19, Alternaria sp. DR45, Annulohypoxylon stigyum DR47 and Talaromyces wortmannii DR49. These strains produced glycohydrolases with different profiles, and production was highly influenced by the carbon sources in the media. CONCLUSIONS: The selected endophytic fungi Aspergillus niger DR02, Trichoderma atroviride DR17 and DR19, Alternaria sp. DR45, Annulohypoxylon stigyum DR47 and Talaromyces wortmannii DR49 are excellent producers of hydrolytic enzymes to be used as part of blends to decompose sugarcane biomass at industrial level.

Microalgae production improvement for the ICCM´s Marine Fish Hatchery

Máster Oficial en Cultivos Marinos. VI Máster Internacional en Acuicultura. Trabajo presentado como requisito parcial para la obtención del Título de Máster Oficial en Cultivos Marinos, otorgado por la Universidad de Las Palmas de Gran Canaria (ULPGC), el Instituto Canario de Ciencias Marinas (ICCM), y el Centro Internacional de Altos Estudios Agronómicos Mediterráneos de Zaragoza (CIHEAM)

L'a(rche)tipico Brian O'Nolan. Comico e riso dalla tradizione al post-

This study aims at analysing Brian O'Nolans literary production in the light of a reconsideration of the role played by his two most famous pseudonyms ,Flann Brien and Myles na Gopaleen, behind which he was active both as a novelist and as a journalist. We tried to establish a new kind of relationship between them and their empirical author following recent cultural and scientific surveys in the field of Humour Studies, Psychology, and Sociology: taking as a starting point the appreciation of the comic attitude in nature and in cultural history, we progressed through a short history of laughter and derision, followed by an overview on humour theories. After having established such a frame, we considered an integration of scientific studies in the field of laughter and humour as a base for our study scheme, in order to come to a definition of the comic author as a recognised, powerful and authoritative social figure who acts as a critic of conventions. The history of laughter and comic we briefly summarized, based on the one related by the French scholar Georges Minois in his work (Minois 2004), has been taken into account in the view that humorous attitude is one of man’s characteristic traits always present and witnessed throughout the ages, though subject in most cases to repression by cultural and political conservative power. This sort of Super-Ego notwithstanding, or perhaps because of that, comic impulse proved irreducible exactly in its influence on the current cultural debates. Basing mainly on Robert R. Provine’s (Provine 2001), Fabio Ceccarelli’s (Ceccarelli 1988), Arthur Koestler’s (Koestler 1975) and Peter L. Berger’s (Berger 1995) scientific essays on the actual occurrence of laughter and smile in complex social situations, we underlined the many evidences for how the use of comic, humour and wit (in a Freudian sense) could be best comprehended if seen as a common mind process designed for the improvement of knowledge, in which we traced a strict relation with the play-element the Dutch historian Huizinga highlighted in his famous essay, Homo Ludens (Huizinga 1955). We considered comic and humour/wit as different sides of the same coin, and showed how the demonstrations scientists provided on this particular subject are not conclusive, given that the mental processes could not still be irrefutably shown to be separated as regards graduations in comic expression and reception: in fact, different outputs in expressions might lead back to one and the same production process, following the general ‘Economy Rule’ of evolution; man is the only animal who lies, meaning with this that one feeling is not necessarily biuniquely associated with one and the same outward display, so human expressions are not validation proofs for feelings. Considering societies, we found that in nature they are all organized in more or less the same way, that is, in élites who govern over a community who, in turn, recognizes them as legitimate delegates for that task; we inferred from this the epistemological possibility for the existence of an added ruling figure alongside those political and religious: this figure being the comic, who is the person in charge of expressing true feelings towards given subjects of contention. Any community owns one, and his very peculiar status is validated by the fact that his place is within the community, living in it and speaking to it, but at the same time is outside it in the sense that his action focuses mainly on shedding light on ideas and objects placed out-side the boundaries of social convention: taboos, fears, sacred objects and finally culture are the favourite targets of the comic person’s arrow. This is the reason for the word a(rche)typical as applied to the comic figure in society: atypical in a sense, because unconventional and disrespectful of traditions, critical and never at ease with unblinkered respect of canons; archetypical, because the “village fool”, buffoon, jester or anyone in any kind of society who plays such roles, is an archetype in the Jungian sense, i.e. a personification of an irreducible side of human nature that everybody instinctively knows: a beginner of a tradition, the perfect type, what is most conventional of all and therefore the exact opposite of an atypical. There is an intrinsic necessity, we think, of such figures in societies, just like politicians and priests, who should play an elitist role in order to guide and rule not for their own benefit but for the good of the community. We are not naïve and do know that actual owners of power always tend to keep it indefinitely: the ‘social comic’ as a role of power has nonetheless the distinctive feature of being the only job whose tension is not towards stability. It has got in itself the rewarding permission of contradiction, for the very reason we exposed before that the comic must cast an eye both inside and outside society and his vision may be perforce not consistent, then it is satisfactory for the popularity that gives amongst readers and audience. Finally, the difference between governors, priests and comic figures is the seriousness of the first two (fundamentally monologic) and the merry contradiction of the third (essentially dialogic). MPs, mayors, bishops and pastors should always console, comfort and soothe popular mood in respect of the public convention; the comic has the opposite task of provoking, urging and irritating, accomplishing at the same time a sort of control of the soothing powers of society, keepers of the righteousness. In this view, the comic person assumes a paramount importance in the counterbalancing of power administration, whether in form of acting in public places or in written pieces which could circulate for private reading. At this point comes into question our Irish writer Brian O'Nolan(1911-1966), real name that stood behind the more famous masks of Flann O'Brien, novelist, author of At Swim-Two-Birds (1939), The Hard Life (1961), The Dalkey Archive (1964) and, posthumously, The Third Policeman (1967); and of Myles na Gopaleen, journalist, keeper for more than 25 years of the Cruiskeen Lawn column on The Irish Times (1940-1966), and author of the famous book-parody in Irish An Béal Bocht (1941), later translated in English as The Poor Mouth (1973). Brian O'Nolan, professional senior civil servant of the Republic, has never seen recognized his authorship in literary studies, since all of them concentrated on his alter egos Flann, Myles and some others he used for minor contributions. So far as we are concerned, we think this is the first study which places the real name in the title, this way acknowledging him an unity of intents that no-one before did. And this choice in titling is not a mere mark of distinction for the sake of it, but also a wilful sign of how his opus should now be reconsidered. In effect, the aim of this study is exactly that of demonstrating how the empirical author Brian O'Nolan was the real Deus in machina, the master of puppets who skilfully directed all of his identities in planned directions, so as to completely fulfil the role of the comic figure we explained before. Flann O'Brien and Myles na Gopaleen were personae and not persons, but the impression one gets from the critical studies on them is the exact opposite. Literary consideration, that came only after O'Nolans death, began with Anne Clissmann’s work, Flann O'Brien: A Critical Introduction to His Writings (Clissmann 1975), while the most recent book is Keith Donohue’s The Irish Anatomist: A Study of Flann O'Brien (Donohue 2002); passing through M.Keith Booker’s Flann O'Brien, Bakhtin and Menippean Satire (Booker 1995), Keith Hopper’s Flann O'Brien: A Portrait of the Artist as a Young Post-Modernist (Hopper 1995) and Monique Gallagher’s Flann O'Brien, Myles et les autres (Gallagher 1998). There have also been a couple of biographies, which incidentally somehow try to explain critical points his literary production, while many critical studies do the same on the opposite side, trying to found critical points of view on the author’s restless life and habits. At this stage, we attempted to merge into O'Nolan's corpus the journalistic articles he wrote, more than 4,200, for roughly two million words in the 26-year-old running of the column. To justify this, we appealed to several considerations about the figure O'Nolan used as writer: Myles na Gopaleen (later simplified in na Gopaleen), who was the equivalent of the street artist or storyteller, speaking to his imaginary public and trying to involve it in his stories, quarrels and debates of all kinds. First of all, he relied much on language for the reactions he would obtain, playing on, and with, words so as to ironically unmask untrue relationships between words and things. Secondly, he pushed to the limit the convention of addressing to spectators and listeners usually employed in live performing, stretching its role in the written discourse to come to a greater effect of involvement of readers. Lastly, he profited much from what we labelled his “specific weight”, i.e. the potential influence in society given by his recognised authority in determined matters, a position from which he could launch deeper attacks on conventional beliefs, so complying with the duty of a comic we hypothesised before: that of criticising society even in threat of losing the benefits the post guarantees. That seemingly masochistic tendency has its rationale. Every representative has many privileges on the assumption that he, or she, has great responsibilities in administrating. The higher those responsibilities are, the higher is the reward but also the severer is the punishment for the misfits done while in charge. But we all know that not everybody accepts the rules and many try to use their power for their personal benefit and do not want to undergo law’s penalties. The comic, showing in this case more civic sense than others, helped very much in this by the non-accessibility to the use of public force, finds in the role of the scapegoat the right accomplishment of his task, accepting the punishment when his breaking of the conventions is too stark to be forgiven. As Ceccarelli demonstrated, the role of the object of laughter (comic, ridicule) has its very own positive side: there is freedom of expression for the person, and at the same time integration in the society, even though at low levels. Then the banishment of a ‘social’ comic can never get to total extirpation from society, revealing how the scope of the comic lies on an entirely fictional layer, bearing no relation with facts, nor real consequences in terms of physical health. Myles na Gopaleen, mastering these three characteristics we postulated in the highest way, can be considered an author worth noting; and the oeuvre he wrote, the whole collection of Cruiskeen Lawn articles, is rightfully a novel because respects the canons of it especially regarding the authorial figure and his relationship with the readers. In addition, his work can be studied even if we cannot conduct our research on the whole of it, this proceeding being justified exactly because of the resemblances to the real figure of the storyteller: its ‘chapters’ —the daily articles— had a format that even the distracted reader could follow, even one who did not read each and every article before. So we can critically consider also a good part of them, as collected in the seven volumes published so far, with the addition of some others outside the collections, because completeness in this case is not at all a guarantee of a better precision in the assessment; on the contrary: examination of the totality of articles might let us consider him as a person and not a persona. Once cleared these points, we proceeded further in considering tout court the works of Brian O'Nolan as the works of a unique author, rather than complicating the references with many names which are none other than well-wrought sides of the same personality. By putting O'Nolan as the correct object of our research, empirical author of the works of the personae Flann O'Brien and Myles na Gopaleen, there comes out a clearer literary landscape: the comic author Brian O'Nolan, self-conscious of his paramount role in society as both a guide and a scourge, in a word as an a(rche)typical, intentionally chose to differentiate his personalities so as to create different perspectives in different fields of knowledge by using, in addition, different means of communication: novels and journalism. We finally compared the newly assessed author Brian O'Nolan with other great Irish comic writers in English, such as James Joyce (the one everybody named as the master in the field), Samuel Beckett, and Jonathan Swift. This comparison showed once more how O'Nolan is in no way inferior to these authors who, greatly celebrated by critics, have nonetheless failed to achieve that great public recognition O’Nolan received alias Myles, awarded by the daily audience he reached and influenced with his Cruiskeen Lawn column. For this reason, we believe him to be representative of the comic figure’s function as a social regulator and as a builder of solidarity, such as that Raymond Williams spoke of in his work (Williams 1982), with in mind the aim of building a ‘culture in common’. There is no way for a ‘culture in common’ to be acquired if we do not accept the fact that even the most functional society rests on conventions, and in a world more and more ‘connected’ we need someone to help everybody negotiate with different cultures and persons. The comic gives us a worldly perspective which is at the same time comfortable and distressing but in the end not harmful as the one furnished by politicians could be: he lets us peep into parallel worlds without moving too far from our armchair and, as a consequence, is the one who does his best for the improvement of our understanding of things.

Food safety in wine: optimization of analytical controls and evaluation of production technologies

This PhD thesis has been proposed to validate and then apply innovative analytical methodologies for the determination of compounds with harmful impact on human health, such as biogenic amines and ochratoxin A in wines. Therefore, the influence of production technology (pH, amino acids precursor and use of different malolactic starters) on biogenic amines content in wines was evaluated. An HPLC method for simultaneous determination of amino acids and amines with precolumnderivatization with 9-Fluorenyl-methoxycarbonyl chloride (FMOC-Cl) and UV detection was developed. Initially, the influence of pH, time of derivatization, gradient profile were studied. In order to improve the separation of amino acids and amines and reduce the time of analysis, it was decided to study the influence of different flows and the use of different columns in the chromatographic method. Firstly, a C18 Luna column was used and later two monolithic columns Chromolith in series. It appeared to be suitable for an easy, precise and accurate determination of a relatively large number of amino acids and amines in wines. This method was then applied on different wines produced in the Emilia Romagna region. The investigation permitted to discriminate between red and white wines. Amino acids content is related to the winemaking process. Biogenic amines content in these wines does not represent a possible toxicological problem for human health. The results of the study of influence of technologies and wine composition demonstrated that pH of wines and amino acids content are the most important factors. Particularly wines with pH > 3,5 show higher concentration of biogenic amines than wines with lower pH. The enrichment of wines by nutrients also influences the content of some biogenic amines that are higher in wines added with amino acids precursors. In this study, amino acids and biogenic amines are not statistically affected by strain of lactic acid bacteria inoculated as a starter for malolactic fermentation. An evaluation of different clean-up (SPE-MycoSep; IACs and LLE) and determination methods (HPLC and ELISA) of ochratoxin A was carried out. The results obtained proved that the SPE clean-up are reliable at the same level while the LLE procedures shows lowest recovery. The ELISA method gave a lower determination and a low reproducibility than HPLC method.

A candidate gene approach to identify DNA markers associated with meat quality and production traits: investigation of several cathepsin genes in Italian heavy pigs.

The cathepsin enzymes represent an important family of lysosomal proteinases with a broad spectrum of functions in many, if not in all, tissues and cell types. In addition to their primary role during the normal protein turnover, they possess highly specific proteolytic activities, including antigen processing in the immune response and a direct role in the development of obesity and tumours. In pigs, the involvement of cathepsin enzymes in proteolytic processes have important effects during the conversion of muscle to meat, due to their influence on meat texture and sensory characteristics, mainly in seasoned products. Their contribution is fundamental in flavour development of dry-curing hams. However, several authors have demonstrated that high cathepsin activity, in particular of cathepsin B, is correlated to defects of these products, such as an excessive meat softness together with abnormal free tyrosine content, astringent or metallic aftertastes and formation of a white film on the cut surface. Thus, investigation of their genetic variability could be useful to identify DNA markers associated with these dry cured hams parameters, but also with meat quality, production and carcass traits in Italian heavy pigs. Unfortunately, no association has been found between cathepsin markers and meat quality traits so far, in particular with cathepsin B activity, suggesting that other genes, besides these, affect meat quality parameters. Nevertheless, significant associations were observed with several carcass and production traits in pigs. A recent study has demonstrated that different single nucleotide polymorphisms (SNPs) localized in cathepsin D (CTSD), F (CTSF), H and Z genes were highly associated with growth, fat deposition and production traits in an Italian Large White pig population. The aim of this thesis was to confirm some of these results in other pig populations and identify new cathepsin markers in order to evaluate their effects on cathepsin activity and other production traits. Furthermore, starting from the data obtained in previous studies on CTSD gene, we also analyzed the known polymorphism located in the insulin-like growth factor 2 gene (IGF2 intron3-g.3072G>A). This marker is considered the causative mutation for the quantitative trait loci (QTL) affecting muscle mass and fat deposition in pigs. Since IGF2 maps very close to CTSD on porcine chromosome (SSC) 2, we wanted to clarify if the effects of the CTSD marker were due to linkage disequilibrium with the IGF2 intron3-g.3072G>A mutation or not. In the first chapter, we reported the results from these two SSC2 gene markers. First of all, we evaluated the effects of the IGF2 intron3-g.3072G>A polymorphism in the Italian Large White breed, for which no previous studies have analysed this marker. Highly significant associations were identified with all estimated breeding values for production and carcass traits (P<0.00001), while no effects were observed for meat quality traits. Instead, the IGF2 intron3-g.3072G>A mutation did not show any associations with the analyzed traits in the Italian Duroc pigs, probably due to the low level of variability at this polymorphic site for this breed. In the same Duroc pig population, significant associations were obtained for the CTSD marker for all production and carcass traits (P < 0.001), after excluding possible confounding effects of the IGF2 mutation. The effects of the CTSD g.70G>A polymorphism were also confirmed in a group of Italian Large White pigs homozygous for the IGF2 intron3-g.3072G allele G (IGF2 intron3-g.3072GG) and by haplotype analysis between the markers of the two considered genes. Taken together, all these data indicated that the IGF2 intron3-g.3072G>A mutation is not the only polymorphism affecting fatness and muscle deposition in pigs. In the second chapter, we reported the analysis of two new SNPs identified in cathepsin L (CTSL) and cathepsin S (CTSS) genes and the association results with meat quality parameters (including cathepsin B activity) and several production traits in an Italian Large White pig population. Allele frequencies of these two markers were evaluated in 7 different pig breeds. Furthermore, we mapped using a radiation hybrid panel the CTSS gene on SSC4. Association studies with several production traits, carried out in 268 Italian Large White pigs, indicated positive effects of the CTSL polymorphism on average daily gain, weight of lean cuts and backfat thickness (P<0.05). The results for these latter traits were also confirmed using a selective genotype approach in other Italian Large White pigs (P<0.01). In the 268 pig group, the CTSS polymorphism was associated with feed:gain ratio and average daily gain (P<0.05). Instead, no association was observed between the analysed markers and meat quality parameters. Finally, we wanted to verify if the positive results obtained for the cathepsin L and S markers and for other previous identified SNPs (cathepsin F, cathepsin Z and their inhibitor cystatin B) were confirmed in the Italian Duroc pig breed (third chapter). We analysed them in two groups of Duroc pigs: the first group was made of 218 performance-tested pigs not selected by any phenotypic criteria, the second group was made of 100 Italian Duroc pigs extreme and divergent for visible intermuscular fat trait. In the first group, the CTSL polymorphism was associated with weight of lean cuts (P<0.05), while suggestive associations were obtained for average daily gain and backfat thickness (P<0.10). Allele frequencies of the CTSL gene marker also differed positively among the visible intermuscular extreme tails. Instead, no positive effects were observed for the other DNA markers on the analysed traits. In conclusion, in agreement with the present data and for the biological role of these enzymes, the porcine CTSD and CTSL markers: a) may have a direct effect in the biological mechanisms involved in determining fat and lean meat content in pigs, or b) these markers could be very close to the putative functional mutation(s) present in other genes. These findings have important practical applications, in particular the CTSD and CTSL mutations could be applied in a marker assisted selection (MAS) both in the Italian Large White and Italian Duroc breeds. Marker assisted selection could also increase in efficiency by adding information from the cathepsin S genotype, but only in the Italian Large White breed.

Measurement of top quark pairs production cross-section in the semi-leptonic channel with the ATLAS experiment

This thesis is about three major aspects of the identification of top quarks. First comes the understanding of their production mechanism, their decay channels and how to translate theoretical formulae into programs that can simulate such physical processes using Monte Carlo techniques. In particular, the author has been involved in the introduction of the POWHEG generator in the framework of the ATLAS experiment. POWHEG is now fully used as the benchmark program for the simulation of ttbar pairs production and decay, along with MC@NLO and AcerMC: this will be shown in chapter one. The second chapter illustrates the ATLAS detectors and its sub-units, such as calorimeters and muon chambers. It is very important to evaluate their efficiency in order to fully understand what happens during the passage of radiation through the detector and to use this knowledge in the calculation of final quantities such as the ttbar production cross section. The last part of this thesis concerns the evaluation of this quantity deploying the so-called "golden channel" of ttbar decays, yielding one energetic charged lepton, four particle jets and a relevant quantity of missing transverse energy due to the neutrino. The most important systematic errors arising from the various part of the calculation are studied in detail. Jet energy scale, trigger efficiency, Monte Carlo models, reconstruction algorithms and luminosity measurement are examples of what can contribute to the uncertainty about the cross-section.

Different approaches to identify markers for meat quality and production traits in pigs: analysis of the transcriptome in post mortem skeletal muscle and investigation of candidate genes

Due to the growing attention of consumers towards their food, improvement of quality of animal products has become one of the main focus of research. To this aim, the application of modern molecular genetics approaches has been proved extremely useful and effective. This innovative drive includes all livestock species productions, including pork. The Italian pig breeding industry is unique because needs heavy pigs slaughtered at about 160 kg for the production of high quality processed products. For this reason, it requires precise meat quality and carcass characteristics. Two aspects have been considered in this thesis: the application of the transcriptome analysis in post mortem pig muscles as a possible method to evaluate meat quality parameters related to the pre mortem status of the animals, including health, nutrition, welfare, and with potential applications for product traceability (chapters 3 and 4); the study of candidate genes for obesity related traits in order to identify markers associated with fatness in pigs that could be applied to improve carcass quality (chapters 5, 6, and 7). Chapter three addresses the first issue from a methodological point of view. When we considered this issue, it was not obvious that post mortem skeletal muscle could be useful for transcriptomic analysis. Therefore we demonstrated that the quality of RNA extracted from skeletal muscle of pigs sampled at different post mortem intervals (20 minutes, 2 hours, 6 hours, and 24 hours) is good for downstream applications. Degradation occurred starting from 48 h post mortem even if at this time it is still possible to use some RNA products. In the fourth chapter, in order to demonstrate the potential use of RNA obtained up to 24 hours post mortem, we present the results of RNA analysis with the Affymetrix microarray platform that made it possible to assess the level of expression of more of 24000 mRNAs. We did not identify any significant differences between the different post mortem times suggesting that this technique could be applied to retrieve information coming from the transcriptome of skeletal muscle samples not collected just after slaughtering. This study represents the first contribution of this kind applied to pork. In the fifth chapter, we investigated as candidate for fat deposition the TBC1D1 [TBC1 (tre-2/USP6, BUB2, cdc16) gene. This gene is involved in mechanisms regulating energy homeostasis in skeletal muscle and is associated with predisposition to obesity in humans. By resequencing a fragment of the TBC1D1 gene we identified three synonymous mutations localized in exon 2 (g.40A>G, g.151C>T, and g.172T>C) and 2 polymorphisms localized in intron 2 (g.219G>A and g.252G>A). One of these polymorphisms (g.219G>A) was genotyped by high resolution melting (HRM) analysis and PCR-RFLP. Moreover, this gene sequence was mapped by radiation hybrid analysis on porcine chromosome 8. The association study was conducted in 756 performance tested pigs of Italian Large White and Italian Duroc breeds. Significant results were obtained for lean meat content, back fat thickness, visible intermuscular fat and ham weight. In chapter six, a second candidate gene (tribbles homolog 3, TRIB3) is analyzed in a study of association with carcass and meat quality traits. The TRIB3 gene is involved in energy metabolism of skeletal muscle and plays a role as suppressor of adipocyte differentiation. We identified two polymorphisms in the first coding exon of the porcine TRIB3 gene, one is a synonymous SNP (c.132T> C), a second is a missense mutation (c.146C> T, p.P49L). The two polymorphisms appear to be in complete linkage disequilibrium between and within breeds. The in silico analysis of the p.P49L substitution suggests that it might have a functional effect. The association study in about 650 pigs indicates that this marker is associated with back fat thickness in Italian Large White and Italian Duroc breeds in two different experimental designs. This polymorphisms is also associated with lactate content of muscle semimembranosus in Italian Large White pigs. Expression analysis indicated that this gene is transcribed in skeletal muscle and adipose tissue as well as in other tissues. In the seventh chapter, we reported the genotyping results for of 677 SNPs in extreme divergent groups of pigs chosen according to the extreme estimated breeding values for back fat thickness. SNPs were identified by resequencing, literature mining and in silico database mining. analysis, data reported in the literature of 60 candidates genes for obesity. Genotyping was carried out using the GoldenGate (Illumina) platform. Of the analyzed SNPs more that 300 were polymorphic in the genotyped population and had minor allele frequency (MAF) >0.05. Of these SNPs, 65 were associated (P<0.10) with back fat thickness. One of the most significant gene marker was the same TBC1D1 SNPs reported in chapter 5, confirming the role of this gene in fat deposition in pig. These results could be important to better define the pig as a model for human obesity other than for marker assisted selection to improve carcass characteristics.

Study of innovative methods of control in the cereal productive chain for the production of beer and spirits

Researches performed during the PhD course intended to assess innovative applications of near-infrared spectroscopy in reflectance (NIR) in the production chain of beer. The purpose is to measure by NIR the "malting quality" (MQ) parameter of barley, to monitor the malting process and to know if a certain type of barley is suitable for the production of beer and spirits. Moreover, NIR will be applied to monitor the brewing process. First of all, it was possible to check the quality of the raw materials like barley, maize and barley malt using a rapid, non-destructive and reliable method, with a low error of prediction. The more interesting result obtained at this level was that the repeatability of the NIR calibration models developed was comparable with the one of the reference method. Moreover, about malt, new kinds of validation were used in order to estimate the real predictive power of the proposed calibration models and to understand the long-term effects. Furthermore, the precision of all the calibration models developed for malt evaluation was estimated and statistically compared with the reference methods, with good results. Then, new calibration models were developed for monitoring the malting process, measuring the moisture content and other malt quality parameters during germination. Moreover it was possible to obtain by NIR an estimate of the "malting quality" (MQ) of barley and to predict whether if its germination will be rapid and uniform and if a certain type of barley is suitable for the production of beer and spirits. Finally, the NIR technique was applied to monitor the brewing process, using correlations between NIR spectra of beer and analytical parameters, and to assess beer quality. These innovative results are potentially very useful for the actors involved in the beer production chain, especially the calibration models suitable for the control of the malting process and for the assessment of the “malting quality” of barley, which need to be deepened in future studies.

Harmful algae and their potential impacts on the coastal ecosystem: growth and toxin production dynamics

The main goal of the present thesis was to study some harmful algal species which cause blooms in Italian coastal waters, leading to consequences for human health, coastal ecosystem, fishery and tourism. In particular, in the first part of this thesis the toxicity of Adriatic strains of the raphidophyte Fibrocapsa japonica was investigated. Despite several hypotheses have been proposed for the toxic mechanism of the raphidophytes, especially for the species Chattonella antiqua and C. marina, which have been studied more extensively, just a few studies on the toxic effects of these species for different organisms were reported. Moreover, a careful reading of the literature evidenced as any ichthyotoxic events reported worldwide can be linked to F. japonica blooms. Although recently several studies were performed on F. japonica strains from the USA, Japan, Australia, New Zealand, the Netherlands, Germany, and France in order to characterize their growth and toxicity features, the work reported in this thesis results one of the first investigation on the toxic effects of F. japonica for different organisms, such as bacteria, crustaceans and fish. Mortality effects, together with haemolysis of fish erythrocytes, probably due to the relatively high amount of PUFAs produced by this species, were observed. Mortality for fish, however, was reported only at a high cell density and after a long exposition period (9-10 days); moreover a significant increase of H2O2 obtained in the tanks where sea basses were exposed to F. japonica was also relevant. This result may justify the absence of ichthyotoxic events in the Italian coasts, despite F. japonica blooms detected in these areas were characterized by high cell densities. This work reports also a first complete characterization of the fatty acids produced and extracellularly released by the Adriatic F. japonica, and results were also compared with the fatty acid profile of other strains. The absence of known brevetoxins in F. japonica algal extracts was also highlighted, leading to the hypothesis that the toxicity of F. japonica may be due to a synergic effect of PUFAs and ROS. Another microalgae that was studied in this thesis is the benthic dinoflagellate Ostreopsis cf. ovata. This species was investigated with the aim to investigate the effect of environmental parameters on its growth and toxicity. O. cf. ovata, in fact, shows different blooming periods along the Italian coasts and even the reported toxic effects are variable. The results of this work confirmed the high variability in the growth dynamic and toxin content of several Italian strains which were isolated in recent years along the Adriatic and Tyrrhenian Seas. Moreover, the effects of temperature and salinity on the behaviour of the different isolates are in good agreement with the results obtained from field surveys, which evidence as the environmental parameters are important factors modulating O. cf. ovata proliferation. Another relevant result that was highlighted is the anomaly in the production of palytoxin-like compounds reported by one of the studied isolate, in particular the one isolated in 2008 in Ancona (Adriatic Sea). Only this strain reported the absence of two (ovatoxin-b and –c) of the five ovatoxins so far known in the toxin profile and a different relative abundance of the other toxins. The last aspect that was studied in this thesis regards the toxin biosythesis. In fact, toxins produced (palytoxin-like compounds) or supposed to be produced (brevetoxin-like compounds) by O. cf. ovata and F. japonica, respectively, are polyketides, which are highly oxygenated compounds synthesized by complex enzymes known as polyketide synthase (PKS) enzymes. These enzymes are multi-domain complexes that structurally and functionally resemble the fatty acid synthases (FASs). This work reports the first study of PKS proteins in the dinoflagellates O. cf. ovata, C. monotis and in the raphidophyte F. japonica. For the first time some PKSs were identified in these species, confirming the presence of PKS proteins predicted by the in silico translation of the transcripts found in K. brevis also in other species. The identification of O. cf. ovata PKSs and the localization of the palytoxin-like compounds produced by this dinoflagellate in a similar location (chloroplast) as that observed for other dinoflagellate and cyanobacterial toxins provides some indication that these proteins may be involved in polyketide biosynthesis. However, their potential function as fatty acid synthases cannot be ruled out, as plant fatty acid synthesis also occurs within chloroplasts. This last hypothesis is also supported by the fact that in all the investigated species, and in particular in F. japonica, PKS proteins were present. Therefore, these results provide an important contribution to the study of the polyketides and of the involvement of PKS proteins in the toxin biosynthesis.

O (alpha 4 s) loop-by-loop contributions to heavy quark pair production in hadronic collisions

The present state of the theoretical predictions for the hadronic heavy hadron production is not quite satisfactory. The full next-to-leading order (NLO) ${cal O} (alpha_s^3)$ corrections to the hadroproduction of heavy quarks have raised the leading order (LO) ${cal O} (alpha_s^2)$ estimates but the NLO predictions are still slightly below the experimental numbers. Moreover, the theoretical NLO predictions suffer from the usual large uncertainty resulting from the freedom in the choice of renormalization and factorization scales of perturbative QCD.In this light there are hopes that a next-to-next-to-leading order (NNLO) ${cal O} (alpha_s^4)$ calculation will bring theoretical predictions even closer to the experimental data. Also, the dependence on the factorization and renormalization scales of the physical process is expected to be greatly reduced at NNLO. This would reduce the theoretical uncertainty and therefore make the comparison between theory and experiment much more significant. In this thesis I have concentrated on that part of NNLO corrections for hadronic heavy quark production where one-loop integrals contribute in the form of a loop-by-loop product. In the first part of the thesis I use dimensional regularization to calculate the ${cal O}(ep^2)$ expansion of scalar one-loop one-, two-, three- and four-point integrals. The Laurent series of the scalar integrals is needed as an input for the calculation of the one-loop matrix elements for the loop-by-loop contributions. Since each factor of the loop-by-loop product has negative powers of the dimensional regularization parameter $ep$ up to ${cal O}(ep^{-2})$, the Laurent series of the scalar integrals has to be calculated up to ${cal O}(ep^2)$. The negative powers of $ep$ are a consequence of ultraviolet and infrared/collinear (or mass ) divergences. Among the scalar integrals the four-point integrals are the most complicated. The ${cal O}(ep^2)$ expansion of the three- and four-point integrals contains in general classical polylogarithms up to ${rm Li}_4$ and $L$-functions related to multiple polylogarithms of maximal weight and depth four. All results for the scalar integrals are also available in electronic form. In the second part of the thesis I discuss the properties of the classical polylogarithms. I present the algorithms which allow one to reduce the number of the polylogarithms in an expression. I derive identities for the $L$-functions which have been intensively used in order to reduce the length of the final results for the scalar integrals. I also discuss the properties of multiple polylogarithms. I derive identities to express the $L$-functions in terms of multiple polylogarithms. In the third part I investigate the numerical efficiency of the results for the scalar integrals. The dependence of the evaluation time on the relative error is discussed. In the forth part of the thesis I present the larger part of the ${cal O}(ep^2)$ results on one-loop matrix elements in heavy flavor hadroproduction containing the full spin information. The ${cal O}(ep^2)$ terms arise as a combination of the ${cal O}(ep^2)$ results for the scalar integrals, the spin algebra and the Passarino-Veltman decomposition. The one-loop matrix elements will be needed as input in the determination of the loop-by-loop part of NNLO for the hadronic heavy flavor production.