Expression of interleukin 4, interleukin 4 splice variants and interferon gamma mRNA in calves experimentally infected with Fasciola hepatica

Interleukin 4 (IL-4) is expected to play a dominant role in the development of T helper (Th) 2 cells. Th2 immune responses with expression of relatively large amounts of interleukin 4 (IL-4) but little interferon gamma (IFN-gamma) are characteristic for chronic helminth infections. But no information is available about IL4 expression during early Fasciola hepatica (F. hepatica) infections in cattle. Therefore, we investigated F. hepatica specific IL-4 and IFN-gamma mRNA expression in peripheral blood mononuclear cells (PBMCs) from calves experimentally infected with F. hepatica. Cells were collected prior to infection and on post-inoculation days (PIDs) 10, 28 and 70. Interestingly, PBMCs responded to stimulation with F. hepatica secretory-excretory products (FhSEP) already on PID 10 and expressed high amounts of IL-4 but not of IFN-gamma mRNA suggesting that F. hepatica induced a Th2 biased early immune response which was not restricted to the site of infection. Later in infection IL-4 mRNA expression decreased whereas IFN-gamma mRNA expression increased slightly. Isolated lymph node cells (LNCs) stimulated with FhSEP and, even more importantly, non-stimulated LN tissue samples indicated highly polarized Th2 type immune responses in the draining (hepatic) lymph node, but not in the retropharyngeal lymph node. During preliminary experiments, two splice variants of bovine IL-4 mRNA, boIL-4delta2 and boIL-4delta3, were detected. Since a human IL-4delta2 was assumed to act as competitive inhibitor of IL-4, it was important to know whether expression of these splice variants of bovine IL-4 have a regulatory function during an immune response to infection with F. hepatica. Indeed, IL-4 splice variants could be detected in a number of samples, but quantitative analysis did not yield any clue to their function. Therefore, the significance of bovine IL-4 splice variants remains to be determined.

Interferon-gamma and interleukin-4 mRNA expression by peripheral blood mononuclear cells from pregnant and non-pregnant cattle seropositive for bovine viral diarrhea virus

The acceptance of the fetal allograft by pregnant women and mice seems to be associated with a shift from a Th 1 dominated to a Th 2 dominated immune response to certain infectious agents. The goal of this study was to examine cytokine expression in peripheral blood mononuclear cells (PBMCs) from cattle immune to bovine viral diarrhea virus (BVDV) to determine whether pregnancy also has an influence on the type of immune response in this species. Forty-six heifers and cows between 14 months and 13 years of age were included in this study. Twenty-four were seropositive and 22 seronegative for BVDV. Eleven of the seropositive animals and 11 of the seronegative animals were in the eighth month of gestation, the remaining animals were virgin heifers. PBMC from these animals were analyzed for Interferon (IFN)-gamma and Interleukin (IL)-4 mRNA expression by real-time RT-PCR after stimulation with a non-cytopathic strain of BVDV. Additionally, an ELISA was performed to measure IFN-gamma in the supernatants of stimulated cell cultures. In BVDV seropositive animals, IFN-gamma mRNA levels were significantly higher than in BVDV seronegative animals and there was a significant positive correlation between the changes in IFN-gamma and IL-4 mRNA expression. There was, however, no significant difference in IFN-gamma and IL-4 mRNA levels between pregnant and non-pregnant animals. These results are inconsistent with BVDV inducing a Th1 or Th2 biased immune response. Furthermore, a shift in the cytokine pattern during bovine pregnancy was not evident.

Das Gebet um Tau : zum Passahfeste

Harry Levy

An interferon-inducible protein, p202, in cancer gene therapy

Interferons (IFNs) have been shown to exert antiviral, cell growth regulatory, and immunomodulatory effects on target cells. Both type I (α and β) and type II (γ) IFNs regulate cellular activities by specifically inducing the expression or activation of endogenous proteins that perform distinct biological functions. p202 is a 52 kDa nuclear phosphoprotein known to be induced by IFNs. p202 interacts with a variety of cellular transcription and growth regulatory factors and affects their functions. ^ In this report, we showed that the expression of p202 was associated with an anti-proliferative effect on human prostate cancer cells. Cells that expressed p202 showed reduced ability to grow in soft-agar, indicating a loss of transformation phenotype. More importantly, p202 expression reduced the tumorigenicity of human prostate cancer cells. p202-expressing cells exhibit an elevated level of hypophosphorylated form of pRb, and reduced level of cyclin B1 and p55CDC. ^ Our data suggest that p202 is a growth inhibitor gene in prostate cancer cells and its expression may also suppress transformation phenotype and tumorigenicity of prostate cancer cells. ^ In addition to inhibiting in vitro cell growth, suppressing the tumorigenicity of breast cancer cells in vivo, p202 expression could sensitize breast cancer cells to apoptosis induced by TNF-α treatment. One possible mechanism contributing to this sensitization is the inactivation of NF-κB by its interaction with p202. These results provide a scientific basis for a novel therapeutic strategy that combines p202 and TNF-α treatment against breast cancer. ^ It has been reported that NF-κB is constitutively active in human pancreatic cancer cells. Since p202 interacts with NF-κB and inhibits its activity, we examined a potential p202-mediated anti-tumor activity in pancreatic cancer. We used both ectopic and orthotopic xenograft models and demonstrated that p202 expression is associated with multiple anti-tumor activities that include inhibition of tumor growth, reduced tumorigenicity, prolonged survival, and remarkably, suppression of metastasis and angiogenesis. In vitro invasion assay also showed that p202-expressing pancreatic cancer cells are less invasive than those without p202 expression. That observation was supported by the findings that p202-expressing tumors showed reduced expression of angiogenic factors such as IL-8, and VEGF by inhibiting their transcription, and p202-expressing pancreatic cancer cells have reduced level of MAP-2 activity, a secreted protease activity important for metastasis. Together, our results strongly suggest that p202 expression mediates multiple anti-tumor activities against pancreatic cancer, and that may provide a scientific basis for developing a p202-based gene therapy in pancreatic cancer treatment. ^ Importantly, we demonstrated a treatment efficacy by using p202/SN2 liposome complex in a nude mice orthotopic breast cancer, and an ectopic pancreatic cancer xenograft model, through systemic and intra-tumor injection respectively. These results suggest a feasibility of using p202/SN2 liposome in future pre-clinical gene therapy experiments. ^

Spiegel eines Thoravorhanges [Illustration] : bei den Gebeten um Tau und Regen

Scan von Monochrom-Mikroform

The performance of interferon-gamma release assays in tuberculosis patients with type II diabetes

The sensitivity of Interferon-γ release assays for detection of Mycobacterium tuberculosis (MTB) infection or disease is affected by conditions that depress host immunity (such as HIV). It is critical to determine whether these assays are affected by diabetes and related conditions (i.e. hyperglycemia, chronic hyperglycemia, or being overweight/obese) given that immune impairment is thought to underline susceptibility to tuberculosis (TB) in people with diabetes. This is important for tuberculosis control due to the millions of type 2 diabetes patients at risk for tuberculosis worldwide.^ The objective of this study was to identify host characteristics, including diabetes, that may affect the sensitivity of two commercially available Interferon-γ (IFN-γ) release assays (IGRA), the QuantiFERON®-TB Gold (QFT-G) and the T-SPOT®.TB in active TB patients. We further explored whether IFN-γ secretion in response to MTB antigens (ESAT-6 and CFP-10) is associated with diabetes and its defining characteristics (high blood glucose, high HbA1c, high BMI). To achieve these objectives, the sensitivity of QFT-G and T-SPOT. TB assays were evaluated in newly diagnosed, tuberculosis confirmed (by positive smear for acid fast bacilli and/or positive culture for MTB) adults enrolled at Texas and Mexico study sites between March 2006 and April 2009. Univariate and multivariate models were constructed to identify host characteristics associated with IGRA result and level of IFN-γ secretion.^ QFT-G was positive in 68% of tuberculosis patients. Those with diabetes, chronic hyperglycemia or obesity were more likely to have a positive QFT-G result, and to secrete higher levels of IFN-γ in response to the mycobacterial antigens (p<0.05). Previous history of BCG vaccination was the only other host characteristic associated with QFT-G result, whereby a higher proportion of non-BCG vaccinated persons were QFT-G positive, in comparison to vaccinated persons. In a separate group of patients, the T-SPOT.TB was 94% sensitive, with similar performance in all tuberculosis patients, regardless of host characteristics.^ In summary, we have demonstrated the validity of QFT-G and T-SPOT. TB to support the diagnosis of TB in patients with a range of host characteristics, but most notably in patients with diabetes. We also confirmed that TB patients with diabetes and associated characteristics (chronic hyperglycemia or BMI) secreted higher titers of IFN-γ when stimulated with MTB specific antigens, in comparison to patients without these characteristics. Together, these findings suggest that the mechanism by which diabetes increases risk to TB may not be explained by the inability to secrete IFN-γ, a key cytokine for TB control.^

Interferon-gamma release assays for latent tuberculosis infection in child and young adult candidates or recipients of tumor necrosis factor inhibitor therapy

Background. Inhibition of tumor necrosis factor (TNF) is associated with progression of latent tuberculosis infection (LTBI) to active disease. LTBI screening prior to starting TNF inhibitor therapy is recommended. Blood tests, collectively known as interferon-gamma release assays (IGRAs), offer a means other than the tuberculin skin test (TST) of screening for LTBI. However, in the setting of immune compromise, anergy may limit the clinical utility of IGRAs. ^ Methods. A cross-sectional study was conducted in children and young adults ≤ 21 years of age who were cared for at Texas Children's Hospital in Houston, TX, during 2011 and who were candidates for, or were receiving, tumor necrosis factor (TNF)-inhibitor therapy. All subjects answered a risk factor questionnaire and were tested for LTBI by two commercially available IGRAs (QuantiFERON-Gold In-Tube assay and the T-SPOT.TB assay), along with the TST. T-cell phenotypes were evaluated through flow cytometry, both at baseline and after antigen stimulation. ^ Results. Twenty-eight subjects were enrolled. All were TST negative and none were IGRA positive. Results were negative for the 27 subjects who were tested with QuantiFERON-Gold In-Tube. However, 26% of subjects demonstrated anergy in the T-SPOT.T. Patients with T-SPOT. TB anergy had lower quantitative IFN-γ responses to mitogen in the QFT assay—the mean IFN-γ level to mitogen in patients without T-SPOT.TB anergy was 9.84 IU/ml compared to 6.91 IU/ml in patients with T-SPOT.TB anergy (P = 0.046). Age and use of TNF inhibitors, corticosteroids, or methotrexate use were not significantly associated with T-SPOT.TB anergy. Antigen stimulation revealed depressed expression of intracellular IFN-γ in subjects with T-SPOT. TB anergy. ^ Conclusions. The frequency of anergy in this population is higher than would be expected from studies in adults. There appears to be inappropriate IFN-γ responses to antigen in subjects with T-SPOT. TB anergy. This immune defect was detected by the T-SPOT. TB assay but not by the QuantiFERON-Gold In-Tube assay. Further data are needed to clarify the utility of IGRAs in this population.^

A Novel Mechanism of Skin Tumor Promotion Involving Interferon-gamma (IFNγ)/Signal Transducer and Activator of Transcription-1 (Stat1) Signaling in Epidermis

The JAK-STAT pathway is a major signaling pathway involved in many biological processes including proliferation, apoptosis, and differentiation. Aberrant expression of STATs has been reported in multiple human cancers and murine mouse models of tumorigenesis. Previous studies from our lab and others have established a critical role for Stat3 in epithelial tumorigenesis, but the role of Stat1 is largely unknown. The current study was designed to explore the role of Stat1 during multistage skin carcinogenesis. Topical treatment with both TPA and the anthrone derivative chrysarobin (CHRY) led to rapid phosphorylation of Stat1 on both tyrosine (Tyr701) and serine (Ser727) residues in epidermis. CHRY treatment also led to upregulation of unphosphorylated Stat1 (uStat1) at later time points. In addition, CHRY treatment also led to upregulation of IRF-1 mRNA and protein which was dependent on Stat1. Further analyses demonstrated that topical treatment with CHRY but not TPA upregulated interferon-gamma (IFNg) mRNA in the epidermis and that the induction of both IRF-1 and uStat1 was dependent on IFNg signaling. Stat1 deficient (Stat1-/-) mice were highly resistant to skin tumor promotion by CHRY. In contrast, the tumor response (in terms of both papillomas and squamous cell carcinomas) was similar in Stat1-/- mice and wild-type littermates with TPA as the promoter. Histological evaluation of the proliferative response confirmed the data obtained from the tumor study for both TPA and CHRY. In addition, maximal induction of both cyclooxygenase-2 and inducible nitric oxide synthase in epidermis following treatment with CHRY was also dependent on the presence of functional Stat1. Following CHRY treatment, Stat1-/- mice exhibited reduced macrophage infiltration and reduced production of many immune cell derived chemokines/cytokines. These studies define a novel mechanism associated with skin tumor promotion by the anthrone class of tumor promoters involving upregulation of IFNg signaling in the epidermis and downstream signaling through activated (phosphorylated) Stat1 and subsequent upregulation of IRF-1 and uStat1.

Limits on muon-neutrino to tau-neutrino oscillations induced by a sterile neutrino state obtained by OPERA at the CNGS beam

The OPERA experiment, exposed to the CERN to Gran Sasso νµ beam, collected data from 2008 to 2012. Four oscillated ντ Charged Current interaction candidates have been detected in appearance mode, which are consistent with νµ → ντ oscillations at the atmospheric ∆m^2 within the “standard” three-neutrino framework. In this paper, the OPERA ντ appearance results are used to derive limits on the mixing parameters of a massive sterile neutrino.

The estimation of truncation error by tau-estimation revisited

The aim of this paper was to accurately estimate the local truncation error of partial differential equations, that are numerically solved using a finite difference or finite volume approach on structured and unstructured meshes. In this work, we approximated the local truncation error using the @t-estimation procedure, which aims to compare the residuals on a sequence of grids with different spacing. First, we focused the analysis on one-dimensional scalar linear and non-linear test cases to examine the accuracy of the estimation of the truncation error for both finite difference and finite volume approaches on different grid topologies. Then, we extended the analysis to two-dimensional problems: first on linear and non-linear scalar equations and finally on the Euler equations. We demonstrated that this approach yields a highly accurate estimation of the truncation error if some conditions are fulfilled. These conditions are related to the accuracy of the restriction operators, the choice of the boundary conditions, the distortion of the grids and the magnitude of the iteration error.

Numerical Error Prediction and its applications in CFD using tau-estimation

Nowadays, Computational Fluid Dynamics (CFD) solvers are widely used within the industry to model fluid flow phenomenons. Several fluid flow model equations have been employed in the last decades to simulate and predict forces acting, for example, on different aircraft configurations. Computational time and accuracy are strongly dependent on the fluid flow model equation and the spatial dimension of the problem considered. While simple models based on perfect flows, like panel methods or potential flow models can be very fast to solve, they usually suffer from a poor accuracy in order to simulate real flows (transonic, viscous). On the other hand, more complex models such as the full Navier- Stokes equations provide high fidelity predictions but at a much higher computational cost. Thus, a good compromise between accuracy and computational time has to be fixed for engineering applications. A discretisation technique widely used within the industry is the so-called Finite Volume approach on unstructured meshes. This technique spatially discretises the flow motion equations onto a set of elements which form a mesh, a discrete representation of the continuous domain. Using this approach, for a given flow model equation, the accuracy and computational time mainly depend on the distribution of nodes forming the mesh. Therefore, a good compromise between accuracy and computational time might be obtained by carefully defining the mesh. However, defining an optimal mesh for complex flows and geometries requires a very high level expertize in fluid mechanics and numerical analysis, and in most cases a simple guess of regions of the computational domain which might affect the most the accuracy is impossible. Thus, it is desirable to have an automatized remeshing tool, which is more flexible with unstructured meshes than its structured counterpart. However, adaptive methods currently in use still have an opened question: how to efficiently drive the adaptation ? Pioneering sensors based on flow features generally suffer from a lack of reliability, so in the last decade more effort has been made in developing numerical error-based sensors, like for instance the adjoint-based adaptation sensors. While very efficient at adapting meshes for a given functional output, the latter method is very expensive as it requires to solve a dual set of equations and computes the sensor on an embedded mesh. Therefore, it would be desirable to develop a more affordable numerical error estimation method. The current work aims at estimating the truncation error, which arises when discretising a partial differential equation. These are the higher order terms neglected in the construction of the numerical scheme. The truncation error provides very useful information as it is strongly related to the flow model equation and its discretisation. On one hand, it is a very reliable measure of the quality of the mesh, therefore very useful in order to drive a mesh adaptation procedure. On the other hand, it is strongly linked to the flow model equation, so that a careful estimation actually gives information on how well a given equation is solved, which may be useful in the context of _ -extrapolation or zonal modelling. The following work is organized as follows: Chap. 1 contains a short review of mesh adaptation techniques as well as numerical error prediction. In the first section, Sec. 1.1, the basic refinement strategies are reviewed and the main contribution to structured and unstructured mesh adaptation are presented. Sec. 1.2 introduces the definitions of errors encountered when solving Computational Fluid Dynamics problems and reviews the most common approaches to predict them. Chap. 2 is devoted to the mathematical formulation of truncation error estimation in the context of finite volume methodology, as well as a complete verification procedure. Several features are studied, such as the influence of grid non-uniformities, non-linearity, boundary conditions and non-converged numerical solutions. This verification part has been submitted and accepted for publication in the Journal of Computational Physics. Chap. 3 presents a mesh adaptation algorithm based on truncation error estimates and compares the results to a feature-based and an adjoint-based sensor (in collaboration with Jorge Ponsín, INTA). Two- and three-dimensional cases relevant for validation in the aeronautical industry are considered. This part has been submitted and accepted in the AIAA Journal. An extension to Reynolds Averaged Navier- Stokes equations is also included, where _ -estimation-based mesh adaptation and _ -extrapolation are applied to viscous wing profiles. The latter has been submitted in the Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. Keywords: mesh adaptation, numerical error prediction, finite volume Hoy en día, la Dinámica de Fluidos Computacional (CFD) es ampliamente utilizada dentro de la industria para obtener información sobre fenómenos fluidos. La Dinámica de Fluidos Computacional considera distintas modelizaciones de las ecuaciones fluidas (Potencial, Euler, Navier-Stokes, etc) para simular y predecir las fuerzas que actúan, por ejemplo, sobre una configuración de aeronave. El tiempo de cálculo y la precisión en la solución depende en gran medida de los modelos utilizados, así como de la dimensión espacial del problema considerado. Mientras que modelos simples basados en flujos perfectos, como modelos de flujos potenciales, se pueden resolver rápidamente, por lo general aducen de una baja precisión a la hora de simular flujos reales (viscosos, transónicos, etc). Por otro lado, modelos más complejos tales como el conjunto de ecuaciones de Navier-Stokes proporcionan predicciones de alta fidelidad, a expensas de un coste computacional mucho más elevado. Por lo tanto, en términos de aplicaciones de ingeniería se debe fijar un buen compromiso entre precisión y tiempo de cálculo. Una técnica de discretización ampliamente utilizada en la industria es el método de los Volúmenes Finitos en mallas no estructuradas. Esta técnica discretiza espacialmente las ecuaciones del movimiento del flujo sobre un conjunto de elementos que forman una malla, una representación discreta del dominio continuo. Utilizando este enfoque, para una ecuación de flujo dado, la precisión y el tiempo computacional dependen principalmente de la distribución de los nodos que forman la malla. Por consiguiente, un buen compromiso entre precisión y tiempo de cálculo se podría obtener definiendo cuidadosamente la malla, concentrando sus elementos en aquellas zonas donde sea estrictamente necesario. Sin embargo, la definición de una malla óptima para corrientes y geometrías complejas requiere un nivel muy alto de experiencia en la mecánica de fluidos y el análisis numérico, así como un conocimiento previo de la solución. Aspecto que en la mayoría de los casos no está disponible. Por tanto, es deseable tener una herramienta que permita adaptar los elementos de malla de forma automática, acorde a la solución fluida (remallado). Esta herramienta es generalmente más flexible en mallas no estructuradas que con su homóloga estructurada. No obstante, los métodos de adaptación actualmente en uso todavía dejan una pregunta abierta: cómo conducir de manera eficiente la adaptación. Sensores pioneros basados en las características del flujo en general, adolecen de una falta de fiabilidad, por lo que en la última década se han realizado grandes esfuerzos en el desarrollo numérico de sensores basados en el error, como por ejemplo los sensores basados en el adjunto. A pesar de ser muy eficientes en la adaptación de mallas para un determinado funcional, este último método resulta muy costoso, pues requiere resolver un doble conjunto de ecuaciones: la solución y su adjunta. Por tanto, es deseable desarrollar un método numérico de estimación de error más asequible. El presente trabajo tiene como objetivo estimar el error local de truncación, que aparece cuando se discretiza una ecuación en derivadas parciales. Estos son los términos de orden superior olvidados en la construcción del esquema numérico. El error de truncación proporciona una información muy útil sobre la solución: es una medida muy fiable de la calidad de la malla, obteniendo información que permite llevar a cabo un procedimiento de adaptación de malla. Está fuertemente relacionado al modelo matemático fluido, de modo que una estimación precisa garantiza la idoneidad de dicho modelo en un campo fluido, lo que puede ser útil en el contexto de modelado zonal. Por último, permite mejorar la precisión de la solución resolviendo un nuevo sistema donde el error local actúa como término fuente (_ -extrapolación). El presenta trabajo se organiza de la siguiente manera: Cap. 1 contiene una breve reseña de las técnicas de adaptación de malla, así como de los métodos de predicción de los errores numéricos. En la primera sección, Sec. 1.1, se examinan las estrategias básicas de refinamiento y se presenta la principal contribución a la adaptación de malla estructurada y no estructurada. Sec 1.2 introduce las definiciones de los errores encontrados en la resolución de problemas de Dinámica Computacional de Fluidos y se examinan los enfoques más comunes para predecirlos. Cap. 2 está dedicado a la formulación matemática de la estimación del error de truncación en el contexto de la metodología de Volúmenes Finitos, así como a un procedimiento de verificación completo. Se estudian varias características que influyen en su estimación: la influencia de la falta de uniformidad de la malla, el efecto de las no linealidades del modelo matemático, diferentes condiciones de contorno y soluciones numéricas no convergidas. Esta parte de verificación ha sido presentada y aceptada para su publicación en el Journal of Computational Physics. Cap. 3 presenta un algoritmo de adaptación de malla basado en la estimación del error de truncación y compara los resultados con sensores de featured-based y adjointbased (en colaboración con Jorge Ponsín del INTA). Se consideran casos en dos y tres dimensiones, relevantes para la validación en la industria aeronáutica. Este trabajo ha sido presentado y aceptado en el AIAA Journal. También se incluye una extensión de estos métodos a las ecuaciones RANS (Reynolds Average Navier- Stokes), en donde adaptación de malla basada en _ y _ -extrapolación son aplicados a perfiles con viscosidad de alas. Este último trabajo se ha presentado en los Actas de la Institución de Ingenieros Mecánicos, Parte G: Journal of Aerospace Engineering. Palabras clave: adaptación de malla, predicción del error numérico, volúmenes finitos

Arquitectura moderna en Chile a través de la obra de TAU arquitectos, 1954 – 1971

En la década del sesenta en Chile existió una de las oficinas más importantes en el panorama arquitectónico nacional de todo el siglo XX. Sin embargo, su obra no ha llegado a ser lo suficientemente conocida debido a diferentes razones históricas, políticas y gremiales. Esta oficina desarrolló su labor en un período político de consolidación democrática, pero de graves dificultades económicas debido a problemas estructurales, por lo cual, el Estado debió intervenir para llevar adelante los planes de progreso y desarrollo del país. El objetivo del presente trabajo es poner en valor la obra de esta oficina, denominada TAU arquitectos, compuesta por profesionales que desde su juventud presentaron un gran compromiso con la realidad social y un enorme fervor por la arquitectura. Se trata del primer estudio sistemático de la trayectoria de este equipo de profesionales, titulados en la Facultad de Arquitectura de la Universidad de Chile, en los años cincuenta. El análisis sigue un desarrollo de lo general a lo particular, donde en primer término se esboza el ambiente histórico en que se originó la oficina, para luego estudiar aquellos aspectos que influyeron en su etapa formativa, finalizando con el análisis de sus obras en detalle. El estudio de éstas se realiza en orden cronológico, distinguiendo etapas de consolidación y madurez durante el transcurso de su labor disciplinar. La tesis pone de manifiesto que la producción arquitectónica de esta oficina, fue el reflejo de la utilización de una metodología de trabajo que integraba aspectos de la nueva arquitectura con las técnicas locales, por lo cual presenta ciertas condiciones regionalistas y resalta las características y cualidades propias del lugar. Paralelamente, evidencia que la obra de este equipo respondía al sistema productivo del país, atendiendo a las posibilidades constructivas y al saber profesional de esa época. Al mismo tiempo, la tesis intenta develar las raíces y fundamentos que están implícitas en el diseño de la forma arquitectónica, estudiando las condiciones de la lógica estructural y su resistencia antisísmica, resaltando aspectos como la articulación del espacio colectivo, el sutil manejo del programa, la relación con el lugar y la interesante expresión de los materiales. ABSTRACT In Chile, during the decade of the 60´s, there existed one of the most important offices in the national architectural scene of the 20th century. However, their work is not sufficiently known due to different historical, political and trade reasons. This Office developed their work during a political period of democratic consolidation, with serious economic difficulties due to structural problems; therefore, the State had to intervene to take forward the plans for the country’s progress and development. The objective of the essay is to value the work of this Office, called TAU arquitectos, who since their youth showed a great commitment to the social reality and a huge fervor for architecture. This is the first systematic study of the trajectory of this team of professionals, whom graduated in the 1950´s in the University of Chile in the Faculty of Architecture. The analysis follows a general development to the specific details, where at first, the historic atmosphere of the office is defined and then to study the aspects that influenced the formative stage of the architects and to finalize, with a detailed analysis of their work. The study of these is performed in a chronological order, distinguishing the stages of consolidation and maturity, during the course of their disciplined commitment. The thesis shows that the architectural production of TAU was the reflection of the use of a methodology that incorporated aspects of the new architecture with local techniques, which presents certain regional conditions and therefore highlights the characteristics and qualities of the place. In Parallel, proving that the work of this team, responded to the production system of the country, according to the constructive possibilities and the professional knowledge of that time. At the same time, the thesis tries to unveil the roots and fundamentals that are implicit in the design of the architectural form, studying the conditions of a structural logic and its seismic resistance; highlighting aspects such as articulation of the collective space, the subtle handling of the program, the relationship with the place and the interesting expression of materials.