Bimanual anterior segment revision surgery for anterior capsule contraction syndrome associated with anterior flexion of intraocular lens haptics

PURPOSE To report the incidence of anterior capsule contraction syndrome (ACCS) and to present a novel minimally invasive bimanual technique for anterior segment revision surgery associated with ACCS with anterior flexion of the intraocular lens haptics. METHODS A consecutive cohort of 268 eyes of 161 patients undergoing phacoemulsification and implantation of the same type of hydrophilic acrylic aspheric intraocular lens cohort were analysed and a novel technique of minimally invasive bimanual technique for anterior segment revision surgery is described. RESULTS We identified four eyes (1.5%) of three patients with advanced ACCS. Successful restoration of a clear visual axis with minimal induction of astigmatism and rapid visual rehabilitation was achieved in all four cases. CONCLUSION This technique is a safe and minimally invasive alternative to laser or vitrector-cut capsulotomy to restore a clear visual axis. In cases of advanced ACCS, it offers the option for haptic reposition or amputation.

ARMin: a robot for patient-cooperative arm therapy

Task-oriented, repetitive and intensive arm training can enhance arm rehabilitation in patients with paralyzed upper extremities due to lesions of the central nervous system. There is evidence that the training duration is a key factor for the therapy progress. Robot-supported therapy can improve the rehabilitation allowing more intensive training. This paper presents the kinematics, the control and the therapy modes of the arm therapy robot ARMin. It is a haptic display with semi-exoskeleton kinematics with four active and two passive degrees of freedom. Equipped with position, force and torque sensors the device can deliver patient-cooperative arm therapy taking into account the activity of the patient and supporting him/her only as much as needed. The haptic display is combined with an audiovisual display that is used to present the movement and the movement task to the patient. It is assumed that the patient-cooperative therapy approach combined with a multimodal display can increase the patient's motivation and activity and, therefore, the therapeutic progress.

A novel paradigm for patient-cooperative control of upper-limb rehabilitation robots

Early intervention and intensive therapy improve the outcome of neuromuscular rehabilitation. There are indications that where a patient is motivated and premeditates their movement, the recovery is more effective. Therefore, a strategy for patient-cooperative control of rehabilitation devices for upper extremities is proposed and evaluated. The strategy is based on the minimal intervention principle allowing an efficient exploitation of task space redundancies and resulting in user-driven movement trajectories. The patient's effort is taken into consideration by enabling the machine to comply with forces exerted by the user. The interaction is enhanced through a multimodal display and a virtually generated environment that includes haptic, visual and sound modalities.

The Social Imaginary of Culture/Civilization in the Arabic Literary Tradition

Charles Taylor’s contribution to social imaginaries offers an interpretive framework for better understanding modernity as secularity. One of its main aspects is conceiving of human society in linear, homogenous time (secular time). Looking into the Arabic intellectual tradition, I will argue in my paper that Taylor’s framework can help us understand major social and intellectual transformations. The Ottoman and Arabic modernization process during the 19th century has often been understood by focusing on certain core concepts. One of these is tamaddun, usually translated as “civilization.” I will be mostly talking about the works of two “pioneers” of Arab modernity (which is traditionally referred to as an-nahḍa, the so-called Arab Renaissance): the Syrian Fransīs Marrāsh and the Egyptian Rifāʿa aṭ-Ṭahṭāwī. First I will focus on Marrāsh’s didactic novel “The Forest of Truth” (1865), as it offers a complex view of tamaddun, which has sometimes been construed as merely a social and political reform program. The category of "social imaginary,” however, is useful in grasping the wider semantic scope of this concept, which is reading it as a signifier for human history conceived of in secular time, as Taylor defines it. This conceptualization of human history functioning within the immanent frame can also be observed in the introduction to “The Extraction of Pure Gold in the Description of Paris” (1834), a systematic account of a travel experience in France that was written by the other “pioneer,” aṭ-Ṭahṭāwī. Finally, in translating tamaddun as “the modern social imaginary of civilization/culture,” the talk aims to consider this imaginary as a major factor in the emergence of the “secular age.” Furthermore, it suggests the importance of studying (quasi-) literary texts, such as historiographical, geographical, and self-narratives in the Arabic literary tradition, in order to further elaborate continuities and ruptures in social imaginaries.

What does professionalisation mean? Perceptions of professionalisation in swiss sport federations

Introduction: Organisational changes in sports federations are often associated with a drift from a volunteer driven to an increasingly business-like phenomenon (Shilbury & Ferkins, 2011). This process of transfor-mation is be called as “professionalization”. Accordingly, professionalization seems to be an appropriate strategy for sport organisations in order to meet organizational pressure due to challenges of a more complex and dynamic changing environment adequately. Despite the increasing research interest and the attempts for systematization on the phenomenon of professionalization it still remains unclear what does the term professionalization exactly mean (Dowling et al., 2014). Thus, there is a lack of a consistent concept of professionalization that is needed in order to explore different facets and perspectives of this phenomenon more validly. Against this background following question emerged: What is the suitable concept of professionalization for analyzing the actual ongoing processes of change, adaption or transformation in sport federations? Methods: Dealing with this question, following two-step approach was choosen: (1) In a first step a scholar’s perspective at professionalisation of sport organisations will be displayed in order to explore both the common ground as well as divergences and inconsistencies in previous approaches. Therefore, a literature review is indicated. (2) In a second step, and in contrast to previous studies we will consider a practical point of view by a so called second-order observation of experts to gain valuable insights into current thinking and acting towards professionalization in sport federations. In doing so, a hermeneutical approach is used, which is about understanding the meaning of contexts by grasping the everyday world, and draw insight and meaning from it (Shilbury et al., 2013). Accordance with hermeneutics, the explorative interpretive knowledge of expert interviews was used. The interviews were conducted with a sample of six selected experts, who have both dedicated insider knowledge and the overall view of all Swiss sport federations. Results and discussion: The summaries of literature review could be categorized into two research currents. The one defines professionalization as a structural process towards professional status of occupations. The other defines it in a broader sense as an organisational change towards a business-like approach. Whereas the first perspective there is a broad scientific consensus that second isn’t that clear, however. Explorative analysis of interview data reveals different themes in relation to professionalization of sports federation. First theme deals with a changed philosophy as more strategic alignment towards for-profit, efficiency and quality orientation. Second theme refers to paid work associated with more competence orientation and balanced governance between paid and voluntary work. Third theme deals with acting shift towards more rationalization and efficiency by implementation of innovative management and communication tools. Based on findings of both our review of scholar`s perspective as well insights from experts we will provide – in the sense of synthesis – a more clear understanding of what does professionalization mean that can be useful in terms of further studies. References: Dowling, M., Edwards, J. & Washington, M. (2014). Understanding the concept of professionalisation in sport management research. Sport Management Review, 17 (4), 520–529. Shilbury, D., Ferkins, L. & Smythe, L. (2013). Sport governance encounters: Insights from lived experiences. Sport Management Review, 16,349–363. Shilbury, D., & Ferkins, L. (2011). Professionalisation, sport governance and strategic capability. Managing Leisure, 16, 108–127.

Competencias para la comprensión de textos y el pensamiento crítico en nivel medio y universitario

La Tesis intenta presentar un estado de la cuestión en las temáticas de comprensión lectora y pensamiento crítico, dos dimensiones centrales de la educación media y universitaria. En la primera, se halla implicada toda una gama de operaciones y habilidades cognoscitivas que confluyen para producir un logro intelectual básico, la captación de los significados de un texto escrito, vehículo privilegiado para la adquisición del conocimiento en la educación formal. Pero, puesto que a la compresión ha de seguir el discernimiento, tanto de la validez formal cuanto del contenido de verdad, se ha de procurar también el desarrollo de habilidades y competencias que van más allá de las básicas y que parcialmente son las que la investigación actual aborda bajo el título de pensamiento crítico. Sin embargo, dados algunos límites que a nuestro juicio muestran los enfoques contemporáneos (que hemos sintetizado como formalismo-funcionalismo), en la segunda instancia de la tesis pretendemos, por una parte, mostrar nuestros propios modos e instrumentos para evaluar ambas competencias y, por otra, plasmar una propuesta de intervención pedagógica en la cual se contribuya a promover objetivos integrales de la educación intelectual, tratando de superar las limitaciones anotadas.

Instituciones y recursos hídricos : Aportes conceptuales para una práctica política congruente con las necesidades locales

Las instituciones para la gestión hídrica tienen serias dificultades para asir la realidad a intervenir porque parten de supuestos abstractos y homogéneos que poco se asemejan a las complejas problemáticas locales, conflictivas y heterogéneas que estarían destinadas a mejorar. Se genera así una problemática brecha entre las políticas públicas y los problemas concretos. El trabajo propone discutir los marcos teóricos institucionales dominantes señalando limitaciones e implicaciones. A partir de una revisión crítica de bibliografía sobre el tema, el artículo establece líneas de base así como un conjunto de dimensiones de análisis que -desde una mirada diferente- aporte a la conformación de un régimen institucional que contribuya a la reproducción sustentable de los recursos hídricos

Instituciones y recursos hídricos : Aportes conceptuales para una práctica política congruente con las necesidades locales

Las instituciones para la gestión hídrica tienen serias dificultades para asir la realidad a intervenir porque parten de supuestos abstractos y homogéneos que poco se asemejan a las complejas problemáticas locales, conflictivas y heterogéneas que estarían destinadas a mejorar. Se genera así una problemática brecha entre las políticas públicas y los problemas concretos. El trabajo propone discutir los marcos teóricos institucionales dominantes señalando limitaciones e implicaciones. A partir de una revisión crítica de bibliografía sobre el tema, el artículo establece líneas de base así como un conjunto de dimensiones de análisis que -desde una mirada diferente- aporte a la conformación de un régimen institucional que contribuya a la reproducción sustentable de los recursos hídricos

Instituciones y recursos hídricos : Aportes conceptuales para una práctica política congruente con las necesidades locales

Las instituciones para la gestión hídrica tienen serias dificultades para asir la realidad a intervenir porque parten de supuestos abstractos y homogéneos que poco se asemejan a las complejas problemáticas locales, conflictivas y heterogéneas que estarían destinadas a mejorar. Se genera así una problemática brecha entre las políticas públicas y los problemas concretos. El trabajo propone discutir los marcos teóricos institucionales dominantes señalando limitaciones e implicaciones. A partir de una revisión crítica de bibliografía sobre el tema, el artículo establece líneas de base así como un conjunto de dimensiones de análisis que -desde una mirada diferente- aporte a la conformación de un régimen institucional que contribuya a la reproducción sustentable de los recursos hídricos

Learning curves of basic laparoscopic psychomotor skills in SINERGIA VR simulator

Purpose: Surgical simulators are currently essential within any laparoscopic training program because they provide a low-stakes, reproducible and reliable environment to acquire basic skills. The purpose of this study is to determine the training learning curve based on different metrics corresponding to five tasks included in SINERGIA laparoscopic virtual reality simulator. Methods: Thirty medical students without surgical experience participated in the study. Five tasks of SINERGIA were included: Coordination, Navigation, Navigation and touch, Accurate grasping and Coordinated pulling. Each participant was trained in SINERGIA. This training consisted of eight sessions (R1–R8) of the five mentioned tasks and was carried out in two consecutive days with four sessions per day. A statistical analysis was made, and the results of R1, R4 and R8 were pair-wise compared with Wilcoxon signed-rank test. Significance is considered at P value <0.005. Results: In total, 84.38% of the metrics provided by SINERGIA and included in this study show significant differences when comparing R1 and R8. Metrics are mostly improved in the first session of training (75.00% when R1 and R4 are compared vs. 37.50% when R4 and R8 are compared). In tasks Coordination and Navigation and touch, all metrics are improved. On the other hand, Navigation just improves 60% of the analyzed metrics. Most learning curves show an improvement with better results in the fulfillment of the different tasks. Conclusions: Learning curves of metrics that assess the basic psychomotor laparoscopic skills acquired in SINERGIA virtual reality simulator show a faster learning rate during the first part of the training. Nevertheless, eight repetitions of the tasks are not enough to acquire all psychomotor skills that can be trained in SINERGIA. Therefore, and based on these results together with previous works, SINERGIA could be used as training tool with a properly designed training program.

Wireless communication enhancement methods for mobile robots in radiation environments

En entornos hostiles tales como aquellas instalaciones científicas donde la radiación ionizante es el principal peligro, el hecho de reducir las intervenciones humanas mediante el incremento de las operaciones robotizadas está siendo cada vez más de especial interés. CERN, la Organización Europea para la Investigación Nuclear, tiene alrededor de unos 50 km de superficie subterránea donde robots móviles controlador de forma remota podrían ayudar en su funcionamiento, por ejemplo, a la hora de llevar a cabo inspecciones remotas sobre radiación en los diferentes áreas destinados al efecto. No solo es preciso considerar que los robots deben ser capaces de recorrer largas distancias y operar durante largos periodos de tiempo, sino que deben saber desenvolverse en los correspondientes túneles subterráneos, tener en cuenta la presencia de campos electromagnéticos, radiación ionizante, etc. y finalmente, el hecho de que los robots no deben interrumpir el funcionamiento de los aceleradores. El hecho de disponer de un sistema de comunicaciones inalámbrico fiable y robusto es esencial para la correcta ejecución de las misiones que los robots deben afrontar y por supuesto, para evitar tales situaciones en las que es necesario la recuperación manual de los robots al agotarse su energía o al perder el enlace de comunicaciones. El objetivo de esta Tesis es proveer de las directrices y los medios necesarios para reducir el riesgo de fallo en la misión y maximizar las capacidades de los robots móviles inalámbricos los cuales disponen de almacenamiento finito de energía al trabajar en entornos peligrosos donde no se dispone de línea de vista directa. Para ello se proponen y muestran diferentes estrategias y métodos de comunicación inalámbrica. Teniendo esto en cuenta, se presentan a continuación los objetivos de investigación a seguir a lo largo de la Tesis: predecir la cobertura de comunicaciones antes y durante las misiones robotizadas; optimizar la capacidad de red inalámbrica de los robots móviles con respecto a su posición; y mejorar el rango operacional de esta clase de robots. Por su parte, las contribuciones a la Tesis se citan más abajo. El primer conjunto de contribuciones son métodos novedosos para predecir el consumo de energía y la autonomía en la comunicación antes y después de disponer de los robots en el entorno seleccionado. Esto es importante para proporcionar conciencia de la situación del robot y evitar fallos en la misión. El consumo de energía se predice usando una estrategia propuesta la cual usa modelos de consumo provenientes de diferentes componentes en un robot. La predicción para la cobertura de comunicaciones se desarrolla usando un nuevo filtro de RSS (Radio Signal Strength) y técnicas de estimación con la ayuda de Filtros de Kalman. El segundo conjunto de contribuciones son métodos para optimizar el rango de comunicaciones usando novedosas técnicas basadas en muestreo espacial que son robustas frente a ruidos de campos de detección y radio y que proporcionan redundancia. Se emplean métodos de diferencia central finitos para determinar los gradientes 2D RSS y se usa la movilidad del robot para optimizar el rango de comunicaciones y la capacidad de red. Este método también se valida con un caso de estudio centrado en la teleoperación háptica de robots móviles inalámbricos. La tercera contribución es un algoritmo robusto y estocástico descentralizado para la optimización de la posición al considerar múltiples robots autónomos usados principalmente para extender el rango de comunicaciones desde la estación de control al robot que está desarrollando la tarea. Todos los métodos y algoritmos propuestos se verifican y validan usando simulaciones y experimentos de campo con variedad de robots móviles disponibles en CERN. En resumen, esta Tesis ofrece métodos novedosos y demuestra su uso para: predecir RSS; optimizar la posición del robot; extender el rango de las comunicaciones inalámbricas; y mejorar las capacidades de red de los robots móviles inalámbricos para su uso en aplicaciones dentro de entornos peligrosos, que como ya se mencionó anteriormente, se destacan las instalaciones científicas con emisión de radiación ionizante. En otros términos, se ha desarrollado un conjunto de herramientas para mejorar, facilitar y hacer más seguras las misiones de los robots en entornos hostiles. Esta Tesis demuestra tanto en teoría como en práctica que los robots móviles pueden mejorar la calidad de las comunicaciones inalámbricas mediante la profundización en el estudio de su movilidad para optimizar dinámicamente sus posiciones y mantener conectividad incluso cuando no existe línea de vista. Los métodos desarrollados en la Tesis son especialmente adecuados para su fácil integración en robots móviles y pueden ser aplicados directamente en la capa de aplicación de la red inalámbrica. ABSTRACT In hostile environments such as in scientific facilities where ionising radiation is a dominant hazard, reducing human interventions by increasing robotic operations are desirable. CERN, the European Organization for Nuclear Research, has around 50 km of underground scientific facilities, where wireless mobile robots could help in the operation of the accelerator complex, e.g. in conducting remote inspections and radiation surveys in different areas. The main challenges to be considered here are not only that the robots should be able to go over long distances and operate for relatively long periods, but also the underground tunnel environment, the possible presence of electromagnetic fields, radiation effects, and the fact that the robots shall in no way interrupt the operation of the accelerators. Having a reliable and robust wireless communication system is essential for successful execution of such robotic missions and to avoid situations of manual recovery of the robots in the event that the robot runs out of energy or when the robot loses its communication link. The goal of this thesis is to provide means to reduce risk of mission failure and maximise mission capabilities of wireless mobile robots with finite energy storage capacity working in a radiation environment with non-line-of-sight (NLOS) communications by employing enhanced wireless communication methods. Towards this goal, the following research objectives are addressed in this thesis: predict the communication range before and during robotic missions; optimise and enhance wireless communication qualities of mobile robots by using robot mobility and employing multi-robot network. This thesis provides introductory information on the infrastructures where mobile robots will need to operate, the tasks to be carried out by mobile robots and the problems encountered in these environments. The reporting of research work carried out to improve wireless communication comprises an introduction to the relevant radio signal propagation theory and technology followed by explanation of the research in the following stages: An analysis of the wireless communication requirements for mobile robot for different tasks in a selection of CERN facilities; predictions of energy and communication autonomies (in terms of distance and time) to reduce risk of energy and communication related failures during missions; autonomous navigation of a mobile robot to find zone(s) of maximum radio signal strength to improve communication coverage area; and autonomous navigation of one or more mobile robots acting as mobile wireless relay (repeater) points in order to provide a tethered wireless connection to a teleoperated mobile robot carrying out inspection or radiation monitoring activities in a challenging radio environment. The specific contributions of this thesis are outlined below. The first sets of contributions are novel methods for predicting the energy autonomy and communication range(s) before and after deployment of the mobile robots in the intended environments. This is important in order to provide situational awareness and avoid mission failures. The energy consumption is predicted by using power consumption models of different components in a mobile robot. This energy prediction model will pave the way for choosing energy-efficient wireless communication strategies. The communication range prediction is performed using radio signal propagation models and applies radio signal strength (RSS) filtering and estimation techniques with the help of Kalman filters and Gaussian process models. The second set of contributions are methods to optimise the wireless communication qualities by using novel spatial sampling based techniques that are robust to sensing and radio field noises and provide redundancy features. Central finite difference (CFD) methods are employed to determine the 2-D RSS gradients and use robot mobility to optimise the communication quality and the network throughput. This method is also validated with a case study application involving superior haptic teleoperation of wireless mobile robots where an operator from a remote location can smoothly navigate a mobile robot in an environment with low-wireless signals. The third contribution is a robust stochastic position optimisation algorithm for multiple autonomous relay robots which are used for wireless tethering of radio signals and thereby to enhance the wireless communication qualities. All the proposed methods and algorithms are verified and validated using simulations and field experiments with a variety of mobile robots available at CERN. In summary, this thesis offers novel methods and demonstrates their use to predict energy autonomy and wireless communication range, optimise robots position to improve communication quality and enhance communication range and wireless network qualities of mobile robots for use in applications in hostile environmental characteristics such as scientific facilities emitting ionising radiations. In simpler terms, a set of tools are developed in this thesis for improving, easing and making safer robotic missions in hostile environments. This thesis validates both in theory and experiments that mobile robots can improve wireless communication quality by exploiting robots mobility to dynamically optimise their positions and maintain connectivity even when the (radio signal) environment possess non-line-of-sight characteristics. The methods developed in this thesis are well-suited for easier integration in mobile robots and can be applied directly at the application layer of the wireless network. The results of the proposed methods have outperformed other comparable state-of-the-art methods.

Percepción dispersa: Arquitectura y tactilidad en la sociedad de la comunicación

El tema de la tesis se centra en el pensamiento de Walter Benjamin y en el concepto de percepción distraída, desarrollado en el ensayo La obra de arte en la época de su reproducibilidad técnica (1936). El título percepción dispersa deriva de una profundización de los conceptos benjaminianos en términos lingüísticos, adoptando otros significados de la palabra distracción que relacionan este concepto a cuestiones de ámbito espacial y atmosférico. Benjamin sostiene que la arquitectura, en una época en la que se desarrollan y se difunden nuevas técnicas de reproducción/ comunicación, no se puede percibir solo de manera visual sino también táctil, interrelacionando la difusión de nuevas técnicas de reproducción, la tensión entre diferentes modalidades perceptivas y la arquitectura: según él, la dispersión de la vista a favor de la percepción táctil/háptica es un rasgo característico de una sociedad en la que se desarrollan y se difunden nuevas técnicas de reproducción. La tesis profundiza en estos temas, actualizando el concepto de distracción/dispersión para valorar las repercusiones de esta intuición en el ámbito de una parte de la producción arquitectónica contemporánea: se propone una contextualización histórica y una conceptual, relativas a los proyectos recientes de algunos de los autores que profundizan en el impacto de las nuevas tecnologías en el ámbito del proyecto de arquitectura. La hipótesis que se quiere demostrar es que se está desarrollando una tendencia que lleva proyectos o edificios de alto nivel tecnológico y informático desde un ámbito de (supuesto) predominio de la percepción visual, hasta una arquitectura que proporciona experiencias multisensoriales: espacios que se pueden medir con el movimiento, los músculos y el tacto, que desarrollan un conjunto de sensaciones táctiles/hápticas y no solo visuales. Finalmente se quiere verificar si, revertiendo siglos de evolución visual, la visión táctil y cercana siga siendo uno de los polos dialécticos que estructuran la experiencia de la arquitectura, como previsto por Benjamin hace 75 años. ABSTRACT The thesis focuses on the thought of Walter Benjamin and the concept of distracted perception, developed in the essay The Work of Art in the Age of Mechanical Reproduction (1936). The title derives from a linguistic approach to this concept which further explores the meaning of the word distraction, finally relating this kind of perception to spatial and atmospheric issues. Benjamin argues that architecture, thanks to the development of new reproduction/communication technologies, cannot be perceived exclusively in a visual way but also in a tactile way, interrelating new technologies of reproduction, perceptual modalities and architecture: according to him, the dispersion of the view in favor of tactile/ haptic perception is a fundamental characteristic of a technologically developed society. The thesis explores these issues, updating the concept of distraction/dispersion to assess its implications in the works of some architects that are exploring with their buildings the impact of new communication technologies in the field of architectural design. The hypothesis at the base of this work is that we are facing a new trend in this particular field: many of the most advanced buildings provide multisensory experience, and define spaces that can be better perceived with the sense of touch (haptic sense), going beyond a mere visual perception. Finally the thesis wants to verify if, reversing centuries of visual evolution, tactile and close vision remains one of the dialectical poles that stay at the base of the experience of architecture, as foreseen by Benjamin 75 years ago. ABSTRACT La tesi si basa sul pensiero di Walter Benjamin e sul concetto di percezione distratta, sviluppato nel saggio La opera d’arte nell’epoca della sua riproducibilità tecnica (1936). Il titolo, percezione dispersa, deriva da un approfondimento dei concetti benjaminiani in termini linguistici, adottando ulteriori significati della parola che il filosofo utilizza per indicare la distrazione e che relazionano questo termine a questioni di ambito spaziale ed atmosferico. Benjamin sostiene che l’architettura, in un’epoca nella quale si sviluppano e si diffondono nuove tecniche di riproduzione (o meglio: nuove tecnologie di comunicazione), non possa essere percepita solamente in maniera visuale, ma anche tattile, mettendo in relazione la diffusione di nuove tecnologie, la tensione tra differenti modalità percettive e l’architettura: secondo Benjamin, la dispersione della vista a favore di una ricezione tattile/aptica della realtà è una caratteristica tipica di quei momenti storici nei quali si manifestano grandi trasformazioni di ambito sociale e culturale dovute allo sviluppo di nuove tecnologie di comunicazione. La tesi approfondisce questi temi, aggiornando il concetto di distrazione/dispersione per valutarne le ripercussioni su una certa parte della produzione architettonica contemporanea: si propone una contestualizzazione storica ed una concettuale, relative ai progetti di alcuni architetti che lavorano da tempo sull’impatto delle nuove tecnologie nell’ambito del progetto di architettura. La ipotesi che si dimostra con questa tesi è che si sta sviluppando una contro-tendenza tattile, a seguito della quale molti degli edifici tecnologicamente ed informaticamente più avanzati strutturano la relazione con i propri utenti sulla base di esperienze multisensoriali, definendo spazi che possono essere percepiti attraverso una percezione aptica, piuttosto che visuale. In definitiva la tesi verifica che, superando secoli di evoluzione visuale, la visione tattile e ravvicinata e - più in generale - una percezione di tipo aptico continuano ad essere uno dei poli dialettici che strutturano l’esperienza dell’architettura, come previsto da Benjamin più di 75 anni fa.

A computational model of the anterior intraparietal area

The monkey anterior intraparietal area (AIP) encodes visual information about three-dimensional object shape that is used to shape the hand for grasping. In robotics a similar role has been played by modules that fit point cloud data to the superquadric family of shapes and its various extensions. We developed a model of shape tuning in AIP based on cosine tuning to superquadric parameters. However, the model did not fit the data well, and we also found that it was difficult to accurately reproduce these parameters using neural networks with the appropriate inputs (modelled on the caudal intraparietal area, CIP). The latter difficulty was related to the fact that there are large discontinuities in the superquadric parameters between very similar shapes. To address these limitations we adopted an alternative shape parameterization based on an Isomap nonlinear dimension reduction. The Isomap was built using gradients and curvatures of object surface depth. This alternative parameterization was low-dimensional (like superquadrics), but data-driven (similar to an alternative clustering approach that is also sometimes used in robotics) and lacked large discontinuities. Isomaps with 16 or more dimensions reproduced the AIP data fairly well. Moreover, we found that the Isomap parameters could be approximated from CIP-like input much more accurately than the superquadric parameters. We conclude that Isomaps, or perhaps alternative dimension reductions of CIP signals, provide a promising model of AIP tuning. We have now started to integrate our model with a robot hand, to explore the efficacy of Isomap shape reductions in grasp planning. Future work will consider dynamics of spike responses and integration with related visual and motor area models.

A sensorless virtual slave control scheme for kinematically dissimilar master-slave teleoperation

The use of telerobotic systems is essential for remote handling (RH) operations in radioactive areas of scientific facilities that generate high doses of radiation. Recent developments in remote handling technology has seen a great deal of effort being directed towards the design of modular remote handling control rooms equipped with a standard master arm which will be used to separately control a range of different slave devices. This application thus requires a kinematically dissimilar master-slave control scheme. In order to avoid drag and other effects such as friction or other non-linear and unmodelled slave arm effects of the common position-position architecture in nonbackdrivable slaves, this research has implemented a force-position control scheme. End-effector force is derived from motor torque values which, to avoid the use of radiation intolerant and costly sensing devices, are inferred from motor current measurement. This has been demonstrated on a 1-DOF test-rig with a permanent magnet synchronous motor teleoperated by a Sensable Phantom Omni® haptic master. This has been shown to allow accurate control while realistically conveying dynamic force information back to the operator.

Volume Haptics and Dendritic Spine Editing

Esta tesis se ha desarrollado en el contexto del proyecto Cajal Blue Brain, una iniciativa europea dedicada al estudio del cerebro. Uno de los objetivos de esta iniciativa es desarrollar nuevos métodos y nuevas tecnologías que simplifiquen el análisis de datos en el campo neurocientífico. El presente trabajo se ha centrado en diseñar herramientas que combinen información proveniente de distintos canales sensoriales con el fin de acelerar la interacción y análisis de imágenes neurocientíficas. En concreto se estudiará la posibilidad de combinar información visual con información háptica. Las espinas dendríticas son pequeñas protuberancias que recubren la superficie dendrítica de muchas neuronas del cerebro. A día de hoy, se cree que tienen un papel clave en la transmisión de señales neuronales. Motivo por el cual, el interés por parte de la comunidad científica por estas estructuras ha ido en aumento a medida que las técnicas de adquisición de imágenes mejoraban hasta alcanzar una calidad suficiente para analizar dichas estructuras. A menudo, los neurocientíficos utilizan técnicas de microscopía con luz para obtener los datos que les permitan analizar estructuras neuronales tales como neuronas, dendritas y espinas dendríticas. A pesar de que estas técnicas ofrezcan ciertas ventajas frente a su equivalente electrónico, las técnicas basadas en luz permiten una menor resolución. En particular, estructuras pequeñas como las espinas dendríticas pueden capturarse de forma incorrecta en las imágenes obtenidas, impidiendo su análisis. En este trabajo, se presenta una nueva técnica, que permite editar imágenes volumétricas, mediante un dispositivo háptico, con el fin de reconstruir de los cuellos de las espinas dendríticas. Con este objetivo, en un primer momento se desarrolló un algoritmo que proporciona retroalimentación háptica en datos volumétricos, completando la información que provine del canal visual. Dicho algoritmo de renderizado háptico permite a los usuarios tocar y percibir una isosuperficie en el volumen de datos. El algoritmo asegura un renderizado robusto y eficiente. Se utiliza un método basado en las técnicas de “marching tetrahedra” para la extracción local de una isosuperficie continua, lineal y definida por intervalos. La robustez deriva tanto de una etapa de detección de colisiones continua de la isosuperficie extraída, como del uso de técnicas eficientes de renderizado basadas en un proxy puntual. El método de “marching tetrahedra” propuesto garantiza que la topología de la isosuperficie extraída coincida con la topología de una isosuperficie equivalente determinada utilizando una interpolación trilineal. Además, con el objetivo de mejorar la coherencia entre la información háptica y la información visual, el algoritmo de renderizado háptico calcula un segundo proxy en la isosuperficie pintada en la pantalla. En este trabajo se demuestra experimentalmente las mejoras en, primero, la etapa de extracción de isosuperficie, segundo, la robustez a la hora de mantener el proxy en la isosuperficie deseada y finalmente la eficiencia del algoritmo. En segundo lugar, a partir del algoritmo de renderizado háptico propuesto, se desarrolló un procedimiento, en cuatro etapas, para la reconstrucción de espinas dendríticas. Este procedimiento, se puede integrar en los cauces de segmentación automática y semiautomática existentes como una etapa de pre-proceso previa. El procedimiento está diseñando para que tanto la navegación como el proceso de edición en sí mismo estén controlados utilizando un dispositivo háptico. Se han diseñado dos experimentos para evaluar esta técnica. El primero evalúa la aportación de la retroalimentación háptica y el segundo se centra en evaluar la idoneidad del uso de un háptico como dispositivo de entrada. En ambos casos, los resultados demuestran que nuestro procedimiento mejora la precisión de la reconstrucción. En este trabajo se describen también dos casos de uso de nuestro procedimiento en el ámbito de la neurociencia: el primero aplicado a neuronas situadas en la corteza cerebral humana y el segundo aplicado a espinas dendríticas situadas a lo largo de neuronas piramidales de la corteza del cerebro de una rata. Por último, presentamos el programa, Neuro Haptic Editor, desarrollado a lo largo de esta tesis junto con los diferentes algoritmos ya mencionados. ABSTRACT This thesis took place within the Cajal Blue Brain project, a European initiative dedicated to the study of the brain. One of the main goals of this project is the development of new methods and technologies simplifying data analysis in neuroscience. This thesis focused on the development of tools combining information originating from distinct sensory channels with the aim of accelerating both the interaction with neuroscience images and their analysis. In concrete terms, the objective is to study the possibility of combining visual information with haptic information. Dendritic spines are thin protrusions that cover the dendritic surface of numerous neurons in the brain and whose function seems to play a key role in neural circuits. The interest of the neuroscience community toward those structures kept increasing as and when acquisition methods improved, eventually to the point that the produced datasets enabled their analysis. Quite often, neuroscientists use light microscopy techniques to produce the dataset that will allow them to analyse neuronal structures such as neurons, dendrites and dendritic spines. While offering some advantages compared to their electronic counterpart, light microscopy techniques achieve lower resolutions. Particularly, small structures such as dendritic spines might suffer from a very low level of fluorescence in the final dataset, preventing further analysis. This thesis introduces a new technique enabling the edition of volumetric datasets in order to recreate dendritic spine necks using a haptic device. In order to fulfil this objective, we first presented an algorithm to provide haptic feedback directly from volumetric datasets, as an aid to regular visualization. The haptic rendering algorithm lets users perceive isosurfaces in volumetric datasets, and it relies on several design features that ensure a robust and efficient rendering. A marching tetrahedra approach enables the dynamic extraction of a piecewise linear continuous isosurface. Robustness is derived using a Continuous Collision Detection step coupled with acknowledged proxy-based rendering methods over the extracted isosurface. The introduced marching tetrahedra approach guarantees that the extracted isosurface will match the topology of an equivalent isosurface computed using trilinear interpolation. The proposed haptic rendering algorithm improves the coherence between haptic and visual cues computing a second proxy on the isosurface displayed on screen. Three experiments demonstrate the improvements on the isosurface extraction stage as well as the robustness and the efficiency of the complete algorithm. We then introduce our four-steps procedure for the complete reconstruction of dendritic spines. Based on our haptic rendering algorithm, this procedure is intended to work as an image processing stage before the automatic segmentation step giving the final representation of the dendritic spines. The procedure is designed to allow both the navigation and the volume image editing to be carried out using a haptic device. We evaluated our procedure through two experiments. The first experiment concerns the benefits of the force feedback and the second checks the suitability of the use of a haptic device as input. In both cases, the results shows that the procedure improves the editing accuracy. We also report two concrete cases where our procedure was employed in the neuroscience field, the first one concerning dendritic spines in the human cortex, the second one referring to an ongoing experiment studying dendritic spines along dendrites of mouse cortical pyramidal neurons. Finally, we present the software program, Neuro Haptic Editor, that was built along the development of the different algorithms implemented during this thesis, and used by neuroscientists to use our procedure.