Desenvolvimento de um equipamento para avaliação do desempenho de geomantas

O controle sobre os processos erosivos é uma necessidade constatada em vários segmentos da engenharia. A movimentação de terra necessária para a execução de taludes rodoviários, por exemplo, pode resultar em taludes de corte ou aterro vulneráveis à erosão superficial. Dentre as alternativas tecnológicas para controle de erosão a utilização de geossintéticos se apresenta como uma solução potencial. A referida aplicação encontra-se em amplo desenvolvimento em alguns países como, por exemplo, nos EUA. No Brasil, a especificação de geossintéticos para controle de erosão é limitada pela ausência de caracterização desses produtos e de normas nacionais, sendo a única fonte técnica de informação, os catálogos dos fabricantes. Neste contexto, o objetivo deste trabalho é construir um equipamento e desenvolver métodos de ensaio para caracterização e avaliação de geossintéticos utilizados no controle de erosão superficial, com base na ASTM D7101. Além de um simulador de chuvas, o equipamento é composto por uma bancada de testes formada por: rampa de escoamento, mesa de suporte e núcleos de solo. Utilizando a bancada construída, foram realizados ensaios para avaliar o funcionamento do equipamento e o desempenho de uma geomanta na redução da taxa de erosão superficial. Os ensaios foram realizados com intensidades de precipitação de 100 ± 4mm/h e 150 ± 4mm/h, durante 30 minutos, com intervalo de leitura de 5 minutos. Os resultados obtidos nos ensaios sem a presença da geomanta mostraram uma perda de solo acentuada durante as chuvas simuladas, com uma iv tendência de crescimento linear da perda de solo acumulada em função do tempo de ensaio. Nos ensaios realizados com a presença da geomanta observou-se a ação de proteção do geossintético com uma redução da ordem de 90% da perda de solo acumulada para todas as intensidades de chuvas utilizadas

Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications

Nanocellulose is the crystalline domains obtained from renewable cellulosic sources, used to increase mechanical properties and biodegrability in polymer composites. This work has been to study how high pressure defibrillation and chemical purification affect the PALF fibre morphology from micro to nanoscale. Microscopy techniques and X-ray diffraction were used to study the structure and properties of the prepared nanofibers and composites. Microscopy studies showed that the used individualization processes lead to a unique morphology of interconnected web-like structure of PALF fibers. The produced nanofibers were bundles of cellulose fibers of widths ranging between 5 and 15 nm and estimated lengths of several micrometers. Percentage yield and aspect ratio of the nanofiber obtained by this technique is found to be very high in comparison with other conventional methods. The nanocomposites were prepared by means of compression moulding, by stacking the nanocellulose fibre mats between polyurethane films. The results showed that the nanofibrils reinforced the polyurethane efficiently. The addition of 5 wt% of cellulose nanofibrils to PU increased the strength nearly 300% and the stiffness by 2600%. The developed composites were utilized to fabricate various versatile medical implants. (C) 2011 Elsevier Ltd. All rights reserved.

Bermuda grass sod production as related to nitrogen rates

O N é o nutriente que proporciona as maiores respostas no crescimento das gramas, e a adubação nitrogenada adequada pode proporcionar a formação do tapete com boa qualidade em menor tempo. Neste trabalho, objetivou-se avaliar a influência da adubação nitrogenada na produção e qualidade de tapetes de grama-bermuda. O experimento foi instalado e conduzido em área de produção comercial de grama, localizada na cidade de Capela do Alto, SP. A grama utilizada foi a Cynodon dactylon (Pers) L., conhecida como grama-bermuda. O delineamento experimental utilizado foi o de blocos casualizados, com cinco tratamentos e quatro repetições. Os tratamentos foram constituídos por cinco doses de N: 0, 150, 300, 450 e 600 kg ha-1. O aumento das doses de N aumentou a taxa de cobertura do solo pela gramabermuda, reduzindo o tempo para formação do tapete. O máximo acúmulo de matéria seca de rizomas + estolões + raízes foi proporcionado pela dose de 354 kg ha-1 de N, e a resistência dos tapetes, pela dose de 365 kg ha-1 de N. Doses de N entre 354 e 365 kg ha-1, aumentaram a resistência dos tapetes e, com isso, a capacidade deles serem manuseados após a colheita, podendo promover assim maior rendimento da área.

Laminados compósitos de PRFV: efeitos da descontinuidade geométrica e do envelhecimento ambiental acelerado

The growing demand in the use of composite materials necessitates a better understanding of its behavior related to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. Within these project conditions are highlighted the presence of geometrical discontinuities in the area of cross and longitudinal sections of structural elements and environmental conditions of work like UV radiation, moisture, heat, leading to a decrease in final mechanical response of the material. In this sense, this thesis aims to develop studies detailed (experimental and semi-empirical models) the effects caused by the presence of geometric discontinuity, more specifically, a central hole in the longitudinal section (with reduced cross section) and the influence of accelerated environmental aging on the mechanical properties and fracture mechanism of FGRP composite laminates under the action of uniaxial tensile loads. Studies on morphological behavior and structural degradation of composite laminates are performed by macroscopic and microscopic analysis of affected surfaces, in addition to evaluation by the Measurement technique for mass variation (TMVM). The accelerated environmental aging conditions are simulated by aging chamber. To study the simultaneous influence of aging/geometric discontinuity in the mechanical properties of composite laminates, a semiempirical model is proposed and called IE/FCPM Model. For the stress concentration due to the central hole, an analisys by failures criteria were performed by Average-Stress Criterion (ASC) and Point-Stress Criterion (PSC). Two polymeric composite laminates, manufactured industrially were studied: the first is only reinforced by short mats of fiberglass-E (LM) and the second where the reinforced by glass fiber/E comes in the form of bidirectional fabric (LT). In the conception configurations of laminates the anisotropy is crucial to the final mechanical response of the same. Finally, a comparative study of all parameters was performed for a better understanding of the results. How conclusive study, the characteristics of the final fracture of the laminate under all conditions that they were subjected, were analyzed. These analyzes were made at the macroscopic level (scanner) microscope (optical and scanning electron). At the end of the analyzes, it was observed that the degradation process occurs similarly for each composite researched, however, the LM composite compared to composite LT (configurations LT 0/90º and LT ±45º) proved to be more susceptible to loss of mechanical properties in both regarding with the central hole as well to accelerated environmental aging

Descontinuidade na seção transversal em laminados compósitos poliméricos: efeitos e propriedades

The growing demand in the use of composite materials necessitates a better understanding its behavior to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. It is know that most of the structural elements are designed with presence of geometric discontinuities (holes, notches, etc) in their longitudinal sections and / or transversals, and that these discontinuities affect the mechanical response of these elements. This work has aims to analyze a study of the mechanical response, when in the presence geometric discontinuity, of polymer matrix composite laminates (orthophthalic polyester) to the uniaxial tensile test. The geometric discontinuity is characterized by the presence of a center hole in the transversal section of the composite. In this study, different kinds of stacking sequences are tested, with and without the presence of the hole, so as to provide better understanding of the mechanical properties. This sense, two laminates were studied: the first is only reinforced by with seven layers short mats of fiberglass-E (CM) and the second where the reinforcement of fiberglass-E comes in the form of bidirectional fabric (CT), with only four layers. The laminate CT has the presence of anisotropy (sense of continuous fibers with respect to the applied load) as the main parameter influencing its mechanical behavior, behavior this, not observed for the CM. In addition to the mechanical properties was also studied the fracture characteristics developed in each composite laminated. The results also showed that the presence of the hole in the transversal section decreased the ultimate strength of laminates and changed the final characteristic of fracture in all kinds of composite laminated studied

Estudo comparativo das propriedades mecânicas em compósitos da fibra modal e poliester

In the present work, three composites with distinct reinforcements (polyester, modal e polyester + modal), all if a unsaturated orthophthalic polyester resin as matrix were used, in order to conduct a comparative study by mechanical tests and water absorption. The fibre mats were prepared in a mat preparatory by immersion developed in the Textile Engineering Laboratory. The composites were manufactured using a closed mould process by compression using an unsaturated orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as an initiator. In each composite twelve samples with the dimensions of 150x25x3 mm were cut randomly for the mechanical analysis (tension x extension, three points bending and water absorption and Scanning Electron Micsroscopy). The mechanical tests were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN . All the analyses were carried out according to the ASTM norms. The resultant samples from the mechanical analysis were subjected for the Scanning Electron Microscopy analysis. Based on the results obtained, it was observed that the reinforced composite with two fibres (modal + polyester) presented better results in comparison to the other two composites both in the tension/extension as well on the three point bending tests. In the water absorption test, it was possible to observe an equilibrium in the water absorption by the modal and polyester composite, due to the union of the two fibres. In the SEM images, the regions of rupture in the composites as well as the adsorption between the fiber and the matrix could be observed

Distribuição de macroalgas lóticas de uma bacia de drenagem no Parque Nacional da Serra da Canastra, Minas Gerais, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ecological distribution of stream macroalgae in different spatial scales using taxonomic and morphological groups

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Macroalgas de ambientes lóticos da região centro-oeste do Paraná, região sul do Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O efeito do regime hidrológico do semiárido na composição de espécies durante dominância de cianobactérias em um reservatório tropical

The potentially toxic cyanobacterial blooms in water bodies are spread across the globe, resulting in the loss of water quality and adverse effects on human health. In arid and semiarid regions, the hydrologic regime characterized by an annual cycle of drought and rain, change the volume and the retention time of the reservoir. Such changes affect the limnological characteristics and causing changes in composition and biomass community of cyanobacteria. The reservoir Cruzeta (Zmax = 8.7 m) is a eutrophic water supply source located in the semiarid tropical (Northeast Brazil). Raised the hypothesis that the hydrological regime of semi-arid tropical is a determining factor in the availability of resources in eutrophic water sources, which influences the composition of dominant species of cyanobacteria. The aim of this study was to analyze the changes in biomass and species composition of cyanobacteria for two annual hydrological cycles and evaluate factors drivers. The study was divided into five distinct periods (dry 2010, rain 2011, dry 2011, rain 2012, dry 2012). The dominant group found in all periods was Cyanobacteria (99% of total biomass), which contributed to the low diversity. The filamentous species Cylindrospermopsis raciborskii was present at both points in almost every study. The colonial species Microcystis panniformis and Sphaerocavum brasiliensis dominated only in periods with lower volumes of water. The diatoms contribute more to the biomass during the period of severe drought. The point near the dam (P1) had phytoplankton biomass larger than the point near the tributary (P2). The dominant species of colonial cyanobacteria lasted until the overflow in P1, and P2 this dominance was until the first rains. The redundancy analysis indicated that physical factors such as light availability and water level were the main factors driving the seasonal succession of phytoplankton. The composition of phytoplankton in spring was alternated by species of filamentous cyanobacteria in conditions of poor stability of the water column, such as Cylindrospermopsis raciborskii, and colonial species under conditions of high stability of the water column, such as Microcystis panniformis and Sphaerocavum brasiliensis. The extremes of torrential rains and severe droughts, governed by the hydrological regime of the semi-arid region led to the availability of resources in the watershed, directing the spatial and temporal dynamics of phytoplankton in the reservoir Cruzeta

A lectin from the lichenized Basidiomycete Dictyonema glabratum

A lectin with hemagglutinating activity has been isolated from an aqueous extract of the symbiotic phenotype of Dictyonema glabratum and its cyanobacterial photobiont Scytonema sp. The purified lectin had a pi of 6.8 and its molecular mass was investigated by electrospray ionization mass spectrometry, gel filtration and SDS-PAGE, which indicated its native conformation as a dimer formed by two identical subunits of 16540 Da. The lectin is a glycoprotein with a low degree of glycosylation, containing galactose, xylose, glucose and mannose as neutral monosaccharides, in addition to glucosamine, which could indicate both N- and O-linkages. Amino acid analysis showed the predominance of nonpolar residues such as phenylalanine. Agglutination of human erythrocytes required divalent cations, which is affected by addition of EDTA. The lectin was more stable at 30 degreesC or less for at least 1 h and between pH 5.0 and 7.0. Among the various compounds tested for hemagglutination inhibition, N-acetylgalactosamine was the most active. The potential role of this lectin in recognition of the compatible cyanobacterial photobiont is discussed.

Avaliação do potencial de toxicidade de florações de cianobactérias como subsídio para ações de gestão ambiental em açudes do semiárido potiguar

Blooms negatively compromise the aquatic environment, plants, animals and human health.Some species are toxin-producing, such as the neurotoxin saxitoxin and the hepatotoxin microcystin, which may contaminate water reservoirs, as those existing in the semiarid region of Rio Grande do Norte (Brazil) which are used to supply the population, fishing, aquiculture and recreational activities, thereby providing the risk of human exposure through water intake, dermal contact and respiratory tract. Thus, it is recommended a constant monitoring of the density of cyanobacteria with the quantification of cyanotoxins. One goal with this work was the monitoring of water in four reservoirs in semiarid of RN through the identification and enumeration of cyanobacteria and through the identification and quantification of cyanotoxins by ELISA. Furthermore, we intended to assess the environmental perception of farmers and artisanal fishers in reservoirs of semiarid of RN through semi-structured interviews with questions mostly related to water and eutrophication. Through these objectives the aim was the development of management strategies for aquaculture and prevention of risks to public health. The results showed that the highest values of microcystins were found in the rainy season. Standards for drinking water, according to the guidelines of Ministry of Health 2914/2011 and CONAMA 357/05, setting the maximum values for raw water density of cyanobacteria: 50,000 cel.mL-1; microcystin: 1 μg. L-1 and saxitoxin: 3 μg. L-1. The values found for microcystin ranged between 0.00227 μg. L-1 and 24.1954 μg. L-1. From 128 samples analyzed, 27% were above the limit. There was no clear seasonal pattern for saxitoxins and their values ranged between 0.003 μg. L-1 and 0.766 μg. L-1 with none of the values above the limit. Furthermore, 76% of the densities of cyanobacteria values were above the limit. About environmental perception, 52 interviews were conducted and the results show that the respondents recognize the main uses of water of the rervoirs, recognize the importance and have a positive view about the reservoirs. They also realize that the water has a poor quality and can cause health problems. The results provide data showing the persistence of cyanobacteria and cyanotoxins, many times over the limit, reinforcing the importance of constant monitoring. The assessment of environmental perception gives foundation for later proposed environmental education linked to public health management into the context of this particular population, making it more effective

A new species of the Rhinella margaritifera group (Anura: Bufonidae) from Brazilian Pantanal

We describe adult morphology, advertisement call and some natural history traits of a new species of toad from the Pantanal, western Brazil. Rhinella paraguayensis sp. nov. belongs to the Rhinella margaritifera group, and is characterized by medium size, snout rounded in dorsal view, with a vertical apical ridge, supraorbital crests weakly developed, parietal crest not well developed, postorbital crest prominent, presence of a dorsolateral line of tubercles, tympanum evident, bony protrusions at angle of jaws, absence of vertebral apophyses and of projections on upper eyelids, and parotoid glands small. The new species is distinguished from other species of the group by geographic distribution and by the use of floating mats of vegetation as reproductive site.

New aerophytic morphospecies of Nostoc (Cyanobacteria) from São Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New aerophytic morphospecies of Cyanobacteria from tropical forest fragments in northwestern São Paulo state, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)