Modelação da interacção entre um plasma de arco de alta pressão e cátodos refractários

Nesta dissertação apresento um estudo detalhado de vários aspectos da interacção entre um plasma de arco de alta pressão e cátodos refractários. Um modelo da camada de plasma junto ao cátodo num plasma sujeito a uma pressão da ordem de uma ou várias atmosferas é reconsiderado com base em recentes resultados teóricos. A física da camada de plasma junto ao cátodo é analisada para valores da queda de tensão na camada de plasma junto ao cátodo até 50V, de acordo com recentes resultados experimentais que mostram que a queda de tensão na camada de plasma junto ao cátodo numa descarga de arco de alta pressão pode atingir valores tão elevados. São identificados os mecanismos que originam a não monotonia da dependência da densidade de fluxo de energia (proveniente do plasma para a superfície do cátodo) em relação à temperatura da superfície do cátodo, para um valor fixo da queda de tensão junto ao cátodo. Uma descrição fechada da interacção plasma-cátodo é obtida por meio da resolução numérica do problema não linear com condições de fronteira para a distribuição da temperatura no interior do corpo do cátodo. São apresentados resultados da modelação numérica da descarga difusa nas condições de funcionamento de uma lâmpada de descarga experimental, sendo bom o acordo entre os resultados numéricos e os dados experimentais. Manchas solitárias num cátodo plano infinito e modos difuso e mancha axialmente simétricos em cátodos finitos de descargas de arco de alta pressão são estudados num grande intervalo de corrente. São analisados aspectos gerais e apresentados resultados numéricos referentes a cátodos de tungsténio planos e de forma cilíndrica a operar num plasma de argon à pressão atmosférica para correntes de arco até 100 kA. Émostrado, em particular, que a temperatura da superfície do cátodo no interior de uma mancha solitária varia relativamente pouco, podendo ser estimada com uma precisão de cerca de 200 − 300K sem ser necesário resolver a equação da condução térmica no corpo do cátodo. O comportamento assimptótico das soluções para um cátodo finito no caso limite de altas correntes é encontrado e confirmado pelos resultados numéricos. É confirmado um padrão geral das características tensão-corrente de vários modos de transferência de corrente em cátodos finitos sugerido previamente com base numa análise de bifurcações. É estudada a transição de modos mancha num cátodo finito no limite de cátodos de grandes dimensões para o modo mancha solitária num cátodo plano infinito. É estabelecido que o modo mancha solitária representa uma forma limite do modo mancha de alta tensão num cátodo finito. É considerada a questão da distinção entre modo difuso e modo mancha num cátodo finito. É desenvolvida uma abordagem para o cálculo de pontos de bifurcação nos quais soluções mancha tridimensionais bifurcam-se a partir de soluções que descrevem o modo difuso e modos mancha axialmente simétricos. Em particular, é calculado o primeiro ponto de bifurcação posicionado na solução que descreve o modo difuso e, por conseguinte, o seu limite de estabilidade, isto é, a corrente abaixo da qual o modo difuso torna-se instável. São apresentados os resultados da modelação numérica efectuada para o caso de um cátodo de tungsténio de forma cilíndrica a operar num plasma de alta pressão. É estudado o efeito produzido no limite de estabilidade pelas variações dos parâmetros de controle (dimensões do cátodo, função de trabalho do material do cátodo, tipo e pressão do gás que produz o plasma). Foi encontrado que o comportamento do limite de estabilidade sujeito a estas variações está em conformidade com as tendências observadas experimentalmente. Foi encontrado que o limite de estabilidade é muito mais sensível às variações dos parâmetros de controle do que as características tensão-corrente do modo difuso, sendo o efeito mais forte produzido pelas variações das dimensões do cátodo e da função de trabalho do material do cátodo. Este resultado está em conformidade com o facto experimental de que a transição difuso-mancha é de difícil reprodução.

Simulação de um sistema aerogerador com controlo óptimo predictivo

Nesta dissertação de mestrado propõe-se simular um sistema para melhorar a qualidade da energia eléctrica produzida por um parque eólico, utilizando conversores multinível NPC costas com costas e controlo óptimo predictivo. Neste trabalho é feito o controlo da potência activa e reactiva que é fornecida à rede de energia eléctrica, a partir de um gerador eólico e é optimizada a forma de onda alternada e sinusoidal de tensão trifásica sem neutro, minimizando o tremor das correntes e a distorção harmónica total, contribuindo para melhorar a qualidade de energia da rede ou de sistemas de alimentação para aplicações críticas como são os sistemas de telecomunicações. Recorre-se ao Matlab/Simulink para simular e comparar os resultados obtidos no sistema de conversão de energia de um parque eólico com o conversor costas com costas com controlo óptimo predictivo com os resultados obtidos com o conversor costas com costas PWM, disponível na biblioteca do software de simulação.

Sistema de monitorização de defeitos na rede de energia elétrica de média tensão

Nesta dissertação de Mestrado em Engenharia Eletrotécnica – Telecomunicações desenvolveu-se um sistema de monitorização de defeitos de uma rede de energia elétrica de média tensão, para melhorar a qualidade de serviço do fornecimento de energia elétrica. O sistema deteta e indica a localização da respetiva falha, que impede o funcionamento de uma parte da rede, também interliga todos os sensores instalados na rede a um ponto central que recebe toda a informação proveniente dos sensores, e ajuda na tomada de decisão. Neste trabalho de dissertação fez-se o estudo e descrição das redes de energia elétrica, realçando a topologia, o modo de operação e parâmetros de qualidade. Assinalou-se também os principais defeitos que podem ocorrer na rede de média tensão. Apresentou-se, ao nível comercial, soluções para mitigar o problema alvo de estudo. Explorou-se, num ambiente de simulação, soluções de deteção dos defeitos da rede, tendo sido desenvolvidos três sistemas distintos: sistema A, sistema B e sistema C. Sistema A que monitoriza o valor nominal da corrente elétrica em cada troço da rede elétrica, sistema B com a monitorização do valor da corrente elétrica em cada posto de transformação e sistema C que compara as correntes no inicio e final de cada troço da rede elétrica, verificando se há alguma discrepância entre ambas. Após a análise e simulação das soluções descreve-se o procedimento realizado para criar um protótipo de um sistema de monitorização. Começou-se por testar, individualmente, os sensores de corrente, circuito de condicionamento, microcontroladores e sistema Scada, usado para a visualização dos dados. Posteriormente, elaborou-se manuais de utilização de forma a auxiliar o sistema em trabalhos futuros que venham dar continuidade a este trabalho. Para validar a análise teórica e confirmar os resultados da simulação, testou-se experimentalmente o sistema de deteção C. Confirmou-se que o sistema de monitorização de defeitos é capaz de detetar e localizar a avaria presente na rede de energia elétrica.

Calheta e Funchal: estudo dialetal e sociolinguístico de alguns regionalismos madeirenses (comparação da sua vitalidade nos dois concelhos)

Este estudo enquadra-se na área da Dialetologia e da Sociolinguística Variacionista, centrando-se na análise de alguns regionalismos madeirenses recolhidos no concelho da Calheta. Estes foram testados através de um questionário semânticolexical aplicado no mesmo concelho e no concelho do Funchal com uma amostra de cento e oito informantes, seis por freguesia, estratificados por idade, sexo e escolaridade. Para o tratamento dos dados usámos a metodologia quantitativa, recorrendo ao programa Microsoft Office Access, que nos dá conta do número de respostas e percentagens registadas, no que respeita ao conhecimento dos cinquenta e dois vocábulos estudados, tendo em conta os fatores de variação social (género, idade e escolaridade) e o fator geográfico (rural vs. urbano). Na análise qualitativa, elaborámos um glossário que sistematiza os significados indicados pelos informantes, registando as diferentes aceções e exemplos de uso dos vocábulos. Alguns destes podem ser classificados como arcaísmos, neologismos regionais e regionalismos usuais ou correntes, sendo que não confirmámos a existência de nenhum populismo, o que nos permite aferir a vitalidade dos regionalismos testados no Português falado nos concelhos da Calheta e do Funchal. Concluímos que a idade e a escolaridade influenciam o maior conhecimento dos vocábulos, ou seja, os falantes mais idosos com baixo grau de escolaridade, independentemente do concelho, mostram-se mais conservadores do que os adultos e do que os jovens. No entanto, o fator geográfico também se revelou pertinente, dado que os adultos e os jovens com ensino secundário e superior, respetivamente, do concelho da Calheta revelaram conhecer mais vocábulos do que os do concelho do Funchal. Apesar da crescente valorização do património lexical madeirense, verificamos que muitos regionalismos virão a desaparecer porque estarão a cair em desuso com as novas gerações.

Projeto de um sistema de conversor multinível para painéis fotovoltaicos

A produção de energia elétrica a partir de fontes de energia renovável está gradualmente a ser uma alternativa à energia produzida a partir de combustíveis fósseis. A técnica de conversão dessas mesmas energias para energia elétrica, para entrega na Rede de Energia Elétrica (REE), é cada vez mais estudada para que se obtenha uma maior eficiência assim como qualidade. Neste trabalho desenvolve-se um projeto de conversão de energia fotovoltaica, para produção de energia elétrica para a rede utilizando um conversor multinível, otimizando a transferência de potência assim como melhorando a forma da corrente AC. A conversão multinível é uma topologia que tem algumas vantagens relativamente à topologia de 2 níveis, permitindo trabalhar com níveis de tensão mais elevados, melhorando a qualidade de energia. O conversor multinível de díodos ligados ao ponto neutro utiliza condensadores para criar os níveis de tensão, que neste trabalho vão ser usados para ligar os painéis, otimizando a transferência de potência. Aplica-se um método de controlo das correntes AC para terem a forma a alternada e sinusoidal e em fase com a tensão da rede. Os resultados experimentais mostram que a utilização do algoritmo de procura do ponto de máxima potência dos painéis permitem a extrair a máxima potência, de acordo com as condições de irradiação solar e temperatura dos painéis.

Gestão da cadeia de suprimento e vantagem competitiva: uma análise em setores industriais a partir da visão relacional

This work has as its main purpose to investigate the contribution of supply chain management in order to obtain competitive advantage by companies from the textile industry and from Ceará footwear industry, focusing its analysis mainly in the interorganizational relations (dyadic). For this, the theoretical referential contemplates different explanatory streams of the competitive advantage, detaching the relational perception of the resources theory, as well as, the main presuppositions of the supply chain management which culminates with the development of an analysis sample that runs the empirical study; the one which considers an expanded purpose of the supply chain which includes the government and the abetment institutions as institutional environment representatives. Besides supply chain management consideration as a competitive advantage source, the work also tried to identify other possible competitive advantage sources for the companies of the investigated sectors. It represents a study of multiple interpretive cases, having four cases as a total; meaning two cases in each one of the sectors, which used as a primary data collecting instrument a semi-structured interview schedule. Different methods were used for the data analysis, the content analysis and the constant comparison methods, the analytical procedure originated from the grounded theory research strategy, which were applied the Atlas/ti software recourse. Considering the theoretical referential and the used analysis sample, four basic categories of the work were defined, including its respective proprieties and dimensions: (1) characteristics concerning to the relationship with the supplier; (2) the company relations with the government; (3) the company relations with the abetment institutions and; (4) obtaining sources of competitive advantage. In general, the applied research in the footwear sector revealed that in the relationships of the researched companies related to its suppliers, there is a predominance of the partnership system and the main presuppositions of the supply chain management are applied which contributes for the acquisition of the relational competitive advantage; while in the textile sector, only some of these presuppositions are applied, with little contribution for the relational competitive advantage. The main resource which was accessed by the companies in both sectors through its relationships with the government and the abetment institutions are the tax incentives which, for the footwear companies, contribute for the acquisition of the temporary competitive advantage in relation to the contestants who do not own productive installations in the Northeast region, it also conducts to a competitive parity situation in relation to the contestants who own productive installations in the Northeast region and to the external market contestants; while for the companies of the textile sector, the tax incentives run the companies to a competitive parity situation in relation to its contestants. Furthermore, the investigated companies from the two sectors possess acquisition sources of the competitive advantage which collimate with different explanatory streams (industrial analysis, resources theory, Austrian school and the dynamic capabilities theory), although there is a predominance of the product innovation as a competitive advantage source in both sectors, due to the bond of these with the fashion tendencies

A confiança interorganizacional nas compras

This research is part of the field of organizational studies, focusing on organizational purchase behavior and, specifically, trust interorganizational at the purchases. This topic is current and relevant by addressing the development of good relations between buyer-supplier that increases the exchange of information, increases the length of relationship, reduces the hierarchical controls and improves performance. Furthermore, although there is a vast literature on trust, the scientific work that deal specifically at the trust interorganizational still need further research to synthesize and validate the variables that generate this phenomenon. In this sense, this investigation is to explain the antecedents of trust interorganizational by the relationship between the variable operational performance, organizational characteristics, shared values and interpersonal relationships on purchases by manufacturing industries, in order to develop a robust literature, most consensual, that includes the current sociological and economic, considering the effect of interpersonal relationships in this phenomenon. This proposal is configured in a new vision of the antecedents of interorganizational trust, described as significant quantitative from models Morgan and Hunt (1994), Doney and Cannon (1997), Zhao and Cavusgil (2006) and Nyaga, Whipple, Lynch (2011), as well as qualitative analysis of Tacconi et al. (2011). With regard to methodological aspects, the study assumes the form of a descriptive, survey type, and causal trace theoretical and empirical. As for his nature, the investigation, explicative character, has developed a quantitative approach with the use of exploratory factor analysis and structural equation modeling SEM, with the use of IBM software SPSS Amos 18.0, using the method of maximum verisimilitude, and supported by technical bootstraping. The unit of analysis was the buyer-supplier relationship, in which the object under investigation was the supplier organization in view of the purchasing company. 237 valid questionnaires were collected among key informants, using a simple random sampling developed in manufacturing industries (SIC 10-33), located in the city of Natal and in the region of Natal. The first results of descriptive analysis demonstrate the phenomenon of interorganizational trust, in which purchasing firms believe, feel secure about the supplier. This demonstration showed high levels of intensity, predominantly among the vendors that supply the company with materials that are used directly in the production process. The exploratory and confirmatory factor analysis, performed on each variable alone, generated a set of observable and unobservable variables more consistent, giving rise to a model, that needed to be further specified. This again specify model consists of trajectories was positive, with a good fit, with a composite reliability and variance extracted satisfactory, and demonstrates convergent and discriminant validity, in which the factor loadings are significant and strong explanatory power. Given the findings that reinforce the model again specify data, suggesting a high probability that this model may be more suited for the study population, the results support the explanation that interorganizational trust depends on purchases directly from interpersonal relationships, sharing value and operating performance and indirectly of personal relationships, social networks, organizational characteristics, physical and relational aspect of performance. It is concluded that this trust can be explained by a set of interactions between these three determinants, where the focus is on interpersonal relationships, with the largest path coefficient for the factor under study

Desempenho internacional de empresas exportadoras: um modelo estrutural baseado em capacidades organizacionais e ambiente

The internationalization as an organizational phenomenon fundamentally strategic had as theoretical contributions some Schools that throughout the decades 60, 70, and 80 developed behavioral and economic approaches in order to explain the process. The behavioral approach deals with the perception of phenomenon as a gradual process from the perspective of the executives behavior (JOHANSON and VAHLNE, 1977; HALLÉN and WIEDERSHEIM - PAUL, 1979; CZINKOTA, 1985). This phenomenon in permanent theoretical and managerial evolution made an opportunity to build this investigation, whose goal is to analyse the impact comes from organizational capabilities and the external environment on the international performance of exporting firms. For both, were used as theoretical basis two types of analysis for the comprehension of international performance: Strategic Management - Industrial Organization and Resource-Based View and International Businesses - Current Economic and Behavioral. It was made a cross-sectional survey-based explanatory research, including 150 exporting companies with operations in the Northeast of Brazil. A conceptual model was made with eight constructs and eight research hypotheses, representative of the effects of external factors on international performance. The data were processed using the Exploratory Factor Analysis and Structural Equation Modeling. The structural equations model was reespecified and estimated through the use of the maximum-likelihood method up to achieve adequated values of indexes of adjustment. As the main theoretical contribution, were identified organizational and physical resources which shows the importance of the management skills development, of the learning capability and capability to establish strategic alliances abroad. That because the knowledge, as the operational point of view as in its strategic application, offers to organization conditions of market positioning which can create opportunities sustainable competitive advantages and which impact the performance of international companies

Autoavaliação institucional na dimensão do SINAES comunicação com a sociedade : estudo de múltiplos casos em instituições de ensino superior do Rio Grande do Norte

This study is about the institutional self-evaluation in Dimension 4, "Communication with Society", from the National System of Higher Education Evaluation SINAES, mandatory for all universities in Brazil. A multiple cases study was conducted with three institutions from Rio Grande do Norte, and the goal was to know how this evaluation is made, describing the concept for the evaluation of communication proposed by them, identifying controllers or emancipator aspects, categorizing methodological procedures and discussing the difficulties reported in the communication evaluation process. Coordinators of the institutions Evaluating Committees were interviewed and data categorized by means of qualitative content analysis. It was noted characteristics of the current controller, emancipator and hybrid designs in the three institutions for evaluation of communication, revealing the lack of a theoretical corpus that transits in accordance with the systemic perspective and epistemology of complexity from SINAES. It was found that the most frequently reported difficulties in the evaluation processes of communication are in the preparation stage, especially in the definition of indicators and tools and awareness work. The weakness in planning makes their own activities in the sector of communication become targets of assessment, forming goals poorly related with broader organizational goals. It was also concluded that the technical evaluation cannot override the issues associated with the broader issue of the complexity surrounding the assessment paradigm proposed by SINAES because contradictions and imperfections are part of the evaluation process and several references are current in the literature to support this view. Finally, it is said that objectives such as transparency and behavioral changes can rely on methodologies and techniques for research on the question of the construction of meaning

Tangibilidade, classe de ativos e estrutura de capital das empresas listadas na BM&FBOVESPA

This study aims to investigate the influence of the asset class and the breakdown of tangibility as determinant factors of the capital structure of companies listed on the BM & FBOVESPA in the period of 2008-2012. Two current assets classes were composed and once they were grouped by liquidity, they were also analyzed by the financial institutions for credit granting: current resources (Cash, Bank and Financial Applications) and operations with duplicates (Stocks and Receivables). The breakdown of the tangible assets was made based on its main components provided as warrantees for loans like Machinery & Equipment and Land & Buildings. For an analysis extension, three metrics for leverage (accounting, financial and market) were applied and the sample was divided into economic sectors, adopted by BM&FBOVESPA. The data model in dynamic panel estimated by a systemic GMM of two levels was used in this study due its strength to problems of endogenous relationship as well as the omitted variables bias. The found results suggest that current resources are determinants of the capital structure possibly because they re characterized as proxies for financial solvency, being its relationship with debt positive. The sectorial analysis confirmed the results for current resources. The tangibility of assets has inverse proportional relationship with the leverage. As it is disintegrated in its main components, the significant and negative influence of machinery & equipment was more marked in the Industrial Goods sector. This result shows that, on average, the most specific assets from operating activities of a company compete for a less use of third party resources. As complementary results, it was observed that the leverage has persistence, which is linked with the static trade-off theory. Specifically for financial leverage, it was observed that the persistence is relevant when it is controlled for the lagged current assets classes variables. The proxy variable for growth opportunities, measured by the Market -to -Book, has the sign of its contradictory coefficient. The company size has a positive relationship with debt, in favor of static trade-off theory. Profitability is the most consistent variable in all the performed estimations, showing strong negative and significant relationship with leverage, as the pecking order theory predicts

Análise da estrutura e transporte do zooplâncton no estuário do Rio Caravelas (Bahia-Brasil) através do uso do zooscan

Spatial-temporal dynamics of zooplankton in the Caravelas river estuary (Bahia, Brazil). The survey was conducted in order to describe the zooplankton community of the estuary Caravelas (Bahia, Brazil), to quantify and relate the patterns of horizontal and vertical transport with the type of tide (neap and spring) and tidal phase (flood and ebb). Zooplankton samples were collected with the aid of a suction pump (300L), filtered in plankton nets (300μm) and fixed in saline formalin 4%. Samples were collected at a fixed point (A1), near the mouth of the estuary, with samples taken at neap tides and spring tides during the dry and rainy seasons. Samples were collected for 13 hours, at intervals of 1 hour in 3 depths: surface, middle and bottom. Simultaneous collection of biological, we measured the current velocity, temperature and salinity of the water through CTD. In the laboratory, samples were selected for analysis in estereomicroscope, with 25 groups identified, with Copepoda getting the highest number of species. The 168 samples obtained from temporal samples were subsampled and processed on equipment ZooScan, with the aid of software ZooProcess at the end were generated 458.997 vingnettes. 8 taxa were identified automatically, with 16 classified as a semi-automatic. The group Copepoda, despite the limited taxonomic refinement ZooScan, obtained 2 genera and 1 species identified automatically. Among the seasons dry and wet groups Brachyura (zoea), Chaetognatha, and the Calanoid copepods (others), Temora spp., Oithona spp. and Euterpina acutifrons were those who had higher frequency of occurrence, appearing in more than 70% of the samples. Copepoda group showed the largest percentage of relative abundance in both seasons. There was no seasonal variation of total zooplankton, with an average density of 7826±4219 org.m-3 in the dry season, and 7959±3675 org.m-3 in the rainy season, neither between the types and phases of the tides, but seasonal differences were significant recorded for the main zooplankton groups. Vertical stratification was seen for the major zooplankton groups (Brachyura, Chaetognatha, Calanoida (other), Oithona spp, Temora spp. e Euterpina acutifrons). The scale of this stratification varied with the type (square or tide) and tidal phase (flood or ebb). The instantaneous transport was more influenced by current velocity, with higher values observed in spring tides to the total zooplankton, however, there was a variation of this pattern depending on the zooplankton group. According to the data import and export of total zooplankton, the outflow of organisms of the estuary was higher than the input. The results suggest that the estuary of Caravelas may influence the dynamics of organic matter to the adjacent coast, with possible consequences in National Marine Park of Abrolhos

Potencialidades de cultivo de macroalgas no litoral do Rio Grande do Norte (NE, Brasil): uma perspectiva de integração de dados ambientais em sistemas de informação geográfica (SIG)

Since centuries ago, the Asians use seaweed as an important source of feeding and are their greatest world-wide consumers. The migration of these peoples for other countries, made the demand for seaweed to increase. This increasing demand prompted an industry with annual values of around US$ 6 billion. The algal biomass used for the industry is collected in natural reservoirs or cultivated. The market necessity for products of the seaweed base promotes an unsustainable exploration of the natural banks, compromising its associated biological balance. In this context, seaweed culture appears as a viable alternative to prevent the depletion of these natural supplies. Geographic Information Systems (GIS) provide space and produce information that can facilitate the evaluation of important physical and socio-economic characteristics for the planning of seaweed culture. This objective of this study is to identify potential coastal areas for seaweed culture in the state of Rio Grande do Norte, from the integration of social-environmental data in the SIG. In order to achieve this objective, a geo-referred database composed of geographical maps, nautical maps and orbital digital images was assembled; and a bank of attributes including physical and oceanographical variables (winds, chains, bathymetry, operational distance from the culture) and social and environmental factors (main income, experience with seaweed harvesting, demographic density, proximity of the sheltered coast and distance of the banks) was produced. In the modeling of the data, the integration of the space database with the bank of attributes for the attainment of the map of potentiality of seaweed culture was carried out. Of a total of 2,011 ha analyzed by the GIS for the culture of seaweed, around 34% or 682 ha were indicated as high potential, 55% or 1,101 ha as medium potential, and 11% or 228 ha as low potential. The good indices of potentiality obtained in the localities studied demonstrate that there are adequate conditions for the installation of seaweed culture in the state of Rio Grande do Norte

Estudos de Durabilidade Frente ao Ataque Ácido de Compósitos Portland-Polímero para Cimentação de Poços de Petróleo

Portland-polymers composites are promising candidates to be used as cementing material in Northeastern oil wells of Brazil containing heavy oils submitted to steam injection. In this way, it is necessary to evaluate its degradation in the commonly acidizind agents. In addition, to identify how aggressive are the different hostile environments it is an important contribution on the decision of the acidic systems to be used in. It was investigated the performance of the Portland-polymer composites using powdered polyurethane, aqueous polyurethane, rubber tire residues and a biopolymer, those were reinforced with polished carbon steel SAE 1045 to make the electrochemical measurements. HCl 15,0 %, HCl 6,0 % + HF 1,5 % (soft mud acid), HCl 12,0 % + HF 3,0 % (regular mud acid) and HAc 10 % + HF 1,5 % were used as degrading environment and electrolytes. The more aggressive acid solution to the plain Portland hardened cement paste was the regular mud acid, that showed loss of weight around 23.0 %, followed by the soft mud acid, the showed 11.0 %, 15.0 % HCl with 7,0 % and, at last the 10.0 % HAc plus HF 1.5 % with just 1.0 %. The powdered polyurethane-composite and the aqueous polyurethane one showed larger durability, with reduction around 87.0 % on the loss of weight in regular mud acid. The acid attack is superficial and it occurs as an action layer, where the degraded layer is responsible for the decrease on the kinetic of the degrading process. This behavior can be seen mainly on the Portland- aqueous polyurethane composite, because the degraded layer is impregnated with chemically modified polymer. The fact of the acid attack does not have influence on the compressive strength or fratography of the samples, in a general way, confirms that theory. The mechanism of the efficiency of the Portland-polymers composites subjected to acid attack is due to decreased porosity and permeability related with the plain Portland paste, minor quantity of Ca+2, element preferentially leached to the acidic solution, wave effect and to substitute part of the degrading bulk for the polymeric one. The electrolyte HAc 10 % + HF 1,5 % was the least aggressive one to the external corrosion of the casing, showing open circuit potentials around +250 mV compared to -130 mV to the simulated pore solution to the first 24 hours immersion. This behavior has been performed for two months at least. Similar corrosion rates were showed between both of the electrolytes, around 0.01 μA.cm-2. Total impedance values, insipient arcs and big polarization resistance capacitive arcs on the Nyquist plots, indicating passivity process, confirm its efficiency. In this way, Portlandpolymers composites are possible solutions to be succeed applied to oilwell cementing concomitant submitted to steam injection and acidizing operation and the HAc 10,0 % + HF 1,5 % is the less aggressive solution to the external corrosion of the casing

Nitretação iônica sem efeito de borda :desenvolvimento e avaliação de uma nova técnica

The ionic nitriding process presents some limitations related with the control of the thickness of the layer and its uniformity. Those limitations that happen during the process, are produced due to edge effects, damage caused by arcing arc and hollow cathode, mainly in pieces with complex geometry and under pressures in excess of 1 mbar. A new technique, denominated ASPN (active screen shapes nitriding) it has been used as alternative, for offering many advantages with respect to dc plasma conventional. The developed system presents a configuration in that the samples treated are surrounded by a large metal screen at high voltage cathodic potencials, (varying between 0 and 1200V) and currents up to 1 A. The sample is placed in floting potential or polarized at relatively lower bias voltages by an auxiliary source. As the plasma is not formed directly in the sample surface but in the metal screen, the mentioned effects are eliminated. This mechanism allows investigate ion of the transfer of nitrogen to the substrate. Optical and electronic microscopy are used to exam morphology and structure at the layer. X-ray difration for phase identification and microhardness to evaluate the efficiency of this process with respect to dc conventional nitriding

Caracterização batimétrica e fisicooceanográfica do canal de acesso ao porto de Cabedelo/PB: uma análise ambiental ao derrame de óleo

The State of Paraíba is one of the most dynamic states of Brazil, strategically located in the northeast, is notable for the excellent potential for integration of different transportation modes forming the states of Rio Grande do Norte, Pernambuco and Alagoas. The dynamic that occurs with port activity causes changes in the space where it is installed. And the elements of this space are always more than suffering direct or indirect influences as the flow in the port is expanded. Therefore, this region became subject to the accidental spillage of oil, because it presents a heavy traffic of ships of various sizes that can run aground or collide with oil causing accidental events. The study of geomorphological and sedimentological compositions of seafloor becomes important as more is known about the relationships between these parameters and associated fauna, and can identify their preferred habitats. The database background, acoustically collected along the proposed study area, is a wealth of information, which were duly examined, cataloged and made available. Such information can serve as an important tool, providing a geomorphological survey of the sedimentary area studied, and come to subsidize, in a flexible, future decision making. With the study area Port of Cabedelo, Paraíba - Brazil, this research aimed to evaluate the influence of the tidal surface and background in modeling the seabed, including the acquisition of information about the location of submerged rocky bodies and the depth of these bodies may turn out to be natural traps for the trapping of oil in case of leaks, and obtain the relationship between types of bed and the hydrodynamic conditions present in the region. In this context, for this study were collected bathymetric data (depth) and physical oceanographic (height of water column, water temperature, intensity and direction of currents, waves and turbidity), meteorological (rainfall, air temperature, humidity, winds and barometric pressure) of the access channel to the Port of Cabedelo / PB and its basin evolution (where the cruise ships dock), and includes tools of remote sensing (Landsat 7 ETM +, 2001), so that images and the results are integrated into Geographic Information Systems and used in the elaboration of measures aimed at environmental protection areas under the influence of this scale facilities, serving as a grant to prepare a contingency plan in case of oil spills in the region. The main findings highlight the techniques of using hydroacoustic data acquisition together bathymetric surveys of high and low frequency. From there, five were prepared in bathymetric pattern of Directorate of Hydrography and Navigation - DHN, with the depth in meters, on a scale of 1:2500 (Channel and Basin Evolution of Access to Port of Cabedelo), where there is a large extent possible beachrocks that hinder the movement of vessels in the port area, which can cause collisions, running aground and leaking oil. From the scatter diagram of the vectors of currents, it can be seen as the tidal stream and undergoes a channeling effect caused by the bidirectional effect of the tide (ebb and flood) in the basin of the Port of Cabedelo evolution in NW-direction SE and the highest speed of the currents occurs at low tide. The characterization weather for the period from 28/02 to 04/07/2010 values was within the expected average for the region of study. The multidisciplinary integration of products (digital maps and remote sensing images), proved to be efficient for the characterization of underwater geomorphological study area, reaching the aim to discriminate and enhance submerged structures, previously not visible in the images