Avaliação de sistemas de produção e aplicação superficial de corretivos em plantio direto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Plantio direto de soja e milho no sistema integração agricultura-pecuária: condicionamento do solo e rotação de culturas

Pós-graduação em Agronomia - FEIS

Produtividade da Alface (lactuca Sativa L.) em Função dos Valores de Lâminas de Água Aplicados por Gotejamento Superficial e Subsuperficial

A cultura da alface é extremamente exigente em água, sendo bastante recomendável a utilização de irrigação por gotejamento, pois neste método é mais fácil se controlar o teor de água no solo próximo a capacidade de campo. Com a evolução das características hidráulicas dos emissores, vem se intensificando cada vez mais o uso do gotejamento abaixo da superfície do solo (gotejamento subsuperficial), com a alegação de se obter algumas vantagens sobre a forma tradicional (gotejamento superficial), como por exemplo a possibilidade de maior vida útil do equipamento e maior eficiência de uso da água. Almejando esta segunda possibilidade, buscou-se no presente trabalho comparar parâmetros de produtividade da cultura da alface submetida a diferentes lâminas de irrigação através de gotejamento superficial e subsuperficial. A alface foi cultivada em um túnel alto, na Fazenda Experimental São Manuel, da Faculdade Ciências Agronômicas, Universidade Estadual Paulista, Campus de Botucatu, localizada no município de São Manuel. Instalou-se no centro do túnel um tanque Classe A que serviu de base para reposição das lâminas de irrigação. Estas lâminas foram equivalentes a 25%, 50%, 75% e 100% da evaporação do tanque Classe A no intervalo entre duas irrigações, que foi igual a três dias. Entre os parâmetros estudados, as duas menores lâminas de irrigação (25% e 50%) responderam melhor ao gotejamento subsuperficial. Os melhores resultados obtidos, tanto no gotejamento superficial como no subsuperficial, se deu através do manejo que utilizou uma reposição de lâmina igual a 100% da evaporação do tanque Classe A.

Níquel em solo e plantas de milho cultivadas em área tratada com lodo de esgoto durante 15 anos consecutivos

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Aplicação de corretivos de acidez do solo na implantação do sistema plantio direto

Pós-graduação em Agronomia (Agricultura) - FCA

Estudo do desempenho de barreiras de geotêxtil para contenção de sedimentos carreados pelo escoamento superficial

Pós-graduação em Engenharia Civil e Ambiental - FEB

Avaliação da erodibilidade pelo método Inderbitzen em solo não saturado da região de Bauru - SP

Pós-graduação em Engenharia Civil e Ambiental - FEB

Vitrocerâmicas porosas via conformação e consolidação com amidos

The search for new methods of manufacture of glass-ceramics with controlled porosity and permeability is interesting of the industrial and commercial point of view, and a challenge of great complexity. Porous glass-ceramics produced by sintering and crystallization of glasses can find applications, for example, as filters, materials with bactericidal properties, bio-implants, as catalytic and enzymes supports, among others. An alternative and low cost method of ceramic manufacture reaching different levels of porosity, for diverse purposes, is the conformation assisted by addition of starch, known as consolidation with starch. The objective of this project is to study the process of conformation with starch for making porous glass-ceramics from a commercial glass in the system Na2O-CaO-SiO2, whose kinetics of sintering by viscous flow and surface crystallization are known. The method of conformation with starches is innovative for glass-ceramics and its development opens the way for obtaining a new class of materials. We found a possible route for the production of porous compacts of glass particles, from the powder preparation to the removal of starch. It was observed that a glass powder obtained by dry milling in a ball mill with alumina balls for 24 h, afterwards mixed with water in an eccentric ball mill for 2 h, without the addition of a deflocculant, and subsequently mixed with starch also in an eccentric ball mill for 5 min resulted in slurries stable against sedimentation

Regeneração natural de mata ciliar em ecossistema de floresta estacional semidecidual: chuva de sementes e banco de sementes do solo

The knowledge of the dynamics of soil seed bank and seed rain is fundamental to understand the forest succession process, as well as for its conservation and restoration. This paper aimed at studying the role of the soil seed bank and seed rain in the dynamics of a riparian tropical seasonal forest fragment located on the hinterland of São Paulo State. The seed rain was studied by 30 litter traps installed at 50 cm from the floor, with an area of 50 cm x 50 cm. Between November of 2008 and October of 2009, 11364 seeds of 82 species belonging to 33 different families were collected. The deposition density of seeds was 126.27 individuals.m². With the data obtained from this research, the two seasons couldn’t be differed from each other hence 2009 was an atypical year considering the precipitation, which was constantly elevated. For the soil seed bank, fifty superficial soil samples will be taken at the end of both the rainy and dry seasons. The germination method was applied for the data analysis. It was observed a predominance of herbaceous habit species, with an average of 71% of the germinations in both seasons. The Sφrensen similarity index between the seasons was low (0,27). The density and species diversity were higher after the rainy season, unlike other published researches

Mapeamento geoestatístico da permeabilidade superficial no entorno do Ribeirão Claro: e simulação da possibilidade de sua contaminação

The evaluation of soil permeability throughout the weathering profile is one of the most important features to be considered in environmental studies. This study, developed from field testing and analysis of data obtained by geostatistical methods, aims at mapping the permeability around the Ribeirão Claro river. The intent is to simulate an accident with toxic liquids where soil permeability is of fundamental importance. Another purpose of the research was to determine the minimum time that, in the event of an accident, a possible contaminant to reach the water table level and be routed to the nearest drain, in this case, the Ribeirao V Claro river constitutes fundamental information. The studied area of approximately 4 km² is located within the UNESP-Rio Claro campus, consisting of colluvial soil from Fm. Rio Claro superimposed on residual soil of Fm. Corumbataí. The method used to determine the permeability is the concentric cylinders performed on a sampling grid with 64 points containing spacing of 5 meters EW and 10 meters NS. In the places of permeability tests were collected samples for laboratory determination of the percentage of fines. From particle size analysis was performed and analysis statistical and geostatistical on this data. The histogram was based on the statistical studies, and the semivariograms were based on geostatistical estimation methods. Based on the comparison between the maps and the data obtained, it was determined that the percentage of fines in colluvial surface soil has little influence on permeability, which the proximity to the Ribeirao Claro river, the eastern portion, a factor that influences the distribution of permeability values

Carta geotécnica de suscetibilidade aos processos de dinâmica superficial na região do Bairro do Peão, Piracaia (SP)

This research presents the result of the engineering geological mapping in a 1:50.000 scale, in Bairro do Peão region, in Piracaia (SP), represented by means of homogeneous units which are susceptible to superficial dynamic processes. To serve as basis for the elaboration of a Chart of Susceptibility to Processes of Superficial Dynamic, a series of physical samples was collected, considering erosive processes and registers of information of usage and soil occupation. The procedure used for elaborating the geotechnical chart is based on Vedovello (2000), which suggests the physiographic compartimentation of the area through photointerpretation and further geotechnical characterization of the selected samples. The geotechnical characterization of the samples was made by identifying the features and properties of the material and forms of the physical environment determining the geotechnical conditions through geological-geotechnical profile descriptions typical of/ peculiar to each unit defined in the area. Thus, for each unit selected, the susceptibility level was established in very high, high, average and low, as well as the prevalent erosive processes.

Fipronil e produtos de degradação: adaptação de método analítico e caracterização de amostras de água, solo e sedimento da Bacia Hidrográfica do Turvo/Grande

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização de melaço, manipueira e soro de queijo como substratos para produção de biossurfactante por Bacillus Pumilus e sua aplicação em biorremediação de solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Injeção de ar via irrigação por gotejamentos superficial e subsuperficial na cultura da alface

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Zoneamento do escoamento superficial da bacia hidrográfica do Rio Paciência, Ilha do Maranhão-MA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)