Visitors' engagement and authenticity: Japanese heritage consumption

Understanding the sense of authenticity of heritage attractions is important for tourism management and marketing because presentation, interpretation and verification has a direct bearing on motivations to visit and engage with heritage tourism sites. This paper establishes relationships among the concepts of culturally specific motivation, perception of authenticity, engagement and attendant behavioral consequences based on domestic visitors' experiences at Japanese heritage sites. It further extends Kolar and Zabkar's (2010) model of authenticity by including concepts of serious leisure, heritage related behaviors, self-connection and their effects over engagement using Partial Least Square, whereby both formative and reflective scales are included. The structural model is tested with a sample of 768 visitors in a culturally specific setting of Japanese heritage sites. The empirical validation of the conceptual model supports the research hypotheses. These findings contribute to a better understanding of visitors' perceptions and valuation of authenticity in Japanese tourist attractions. Several implications can be drawn from the study findings and interesting directions for future research are provided.

Incomplete information games of conflict and collective action

My thesis consists of three essays that investigate strategic interactions between individuals engaging in risky collective action in uncertain environments. The first essay analyzes a broad class of incomplete information coordination games with a wide range of applications in economics and politics. The second essay draws from the general model developed in the first essay to study decisions by individuals of whether to engage in protest/revolution/coup/strike. The final essay explicitly integrates state response to the analysis. The first essay, Coordination Games with Strategic Delegation of Pivotality, exhaustively analyzes a class of binary action, two-player coordination games in which players receive stochastic payoffs only if both players take a ``stochastic-coordination action''. Players receive conditionally-independent noisy private signals about the normally distributed stochastic payoffs. With this structure, each player can exploit the information contained in the other player's action only when he takes the “pivotalizing action”. This feature has two consequences: (1) When the fear of miscoordination is not too large, in order to utilize the other player's information, each player takes the “pivotalizing action” more often than he would based solely on his private information, and (2) best responses feature both strategic complementarities and strategic substitutes, implying that the game is not supermodular nor a typical global game. This class of games has applications in a wide range of economic and political phenomena, including war and peace, protest/revolution/coup/ strike, interest groups lobbying, international trade, and adoption of a new technology. My second essay, Collective Action with Uncertain Payoffs, studies the decision problem of citizens who must decide whether to submit to the status quo or mount a revolution. If they coordinate, they can overthrow the status quo. Otherwise, the status quo is preserved and participants in a failed revolution are punished. Citizens face two types of uncertainty. (a) non-strategic: they are uncertain about the relative payoffs of the status quo and revolution, (b) strategic: they are uncertain about each other's assessments of the relative payoff. I draw on the existing literature and historical evidence to argue that the uncertainty in the payoffs of status quo and revolution is intrinsic in politics. Several counter-intuitive findings emerge: (1) Better communication between citizens can lower the likelihood of revolution. In fact, when the punishment for failed protest is not too harsh and citizens' private knowledge is accurate, then further communication reduces incentives to revolt. (2) Increasing strategic uncertainty can increase the likelihood of revolution attempts, and even the likelihood of successful revolution. In particular, revolt may be more likely when citizens privately obtain information than when they receive information from a common media source. (3) Two dilemmas arise concerning the intensity and frequency of punishment (repression), and the frequency of protest. Punishment Dilemma 1: harsher punishments may increase the probability that punishment is materialized. That is, as the state increases the punishment for dissent, it might also have to punish more dissidents. It is only when the punishment is sufficiently harsh, that harsher punishment reduces the frequency of its application. Punishment Dilemma 1 leads to Punishment Dilemma 2: the frequencies of repression and protest can be positively or negatively correlated depending on the intensity of repression. My third essay, The Repression Puzzle, investigates the relationship between the intensity of grievances and the likelihood of repression. First, I make the observation that the occurrence of state repression is a puzzle. If repression is to succeed, dissidents should not rebel. If it is to fail, the state should concede in order to save the costs of unsuccessful repression. I then propose an explanation for the “repression puzzle” that hinges on information asymmetries between the state and dissidents about the costs of repression to the state, and hence the likelihood of its application by the state. I present a formal model that combines the insights of grievance-based and political process theories to investigate the consequences of this information asymmetry for the dissidents' contentious actions and for the relationship between the magnitude of grievances (formulated here as the extent of inequality) and the likelihood of repression. The main contribution of the paper is to show that this relationship is non-monotone. That is, as the magnitude of grievances increases, the likelihood of repression might decrease. I investigate the relationship between inequality and the likelihood of repression in all country-years from 1981 to 1999. To mitigate specification problem, I estimate the probability of repression using a generalized additive model with thin-plate splines (GAM-TPS). This technique allows for flexible relationship between inequality, the proxy for the costs of repression and revolutions (income per capita), and the likelihood of repression. The empirical evidence support my prediction that the relationship between the magnitude of grievances and the likelihood of repression is non-monotone.

Portuguese children exposure to multiple mycotoxins through food consumption: toward a holistic approach for multiple mycotoxins risk assessment

Humans can be exposed to multiple chemicals at once from a variety of sources, and human risk assessment of multiple chemicals poses several challenges to scientists, risk assessors and risk managers. Ingestion of food is considered a major route of exposure to many contaminants, namely mycotoxins, especially for vulnerable population groups, as children. A lack of sufficient data regarding mycotoxins children risk assessment, could contribute to an inaccuracy of the estimated risk. Efforts must be undertaken to develop initiatives that promote a broad overview of multiple mycotoxins risk assessment. The present work, developed within the MYCOMIX project, aims to assess the risk associated to the exposure of Portuguese children (< 3 years old) to multiple mycotoxins through consumption of foods primarily marketed for this age group. A holistic approach was developed applying deterministic and probabilistic tools to the calculation of mycotoxin daily intake values, integrating children food consumption (3-days food diary), mycotoxins occurrence (HPLC-UV, HPLC-FD, LC-MS/MS and GC-MS), bioaccessibility (standardized in vitro digestion model) and toxicological data (in vitro evaluation of cytotoxicity, genotoxicity and intestinal impact). A case study concerning Portuguese children exposure to patulin (PAT) and ochratoxin A (OTA), two mycotoxins co-occurring in processed cereal-based foods (PCBF) marketed in Portugal, was developed. Main results showed that there is low concern from a public health point of view relatively to PAT and OTA Portuguese children exposure through consumption of PCBF, considering the estimated daily intakes of these two mycotoxins (worst case scenarios, 22.930 ng/kg bw/day and 0.402 ng/kg bw/day, for PAT and OTA, respectively), their bioaccessibility and toxicology results. However, the present case study only concerns the risk associated with the consumption of PCBF and child diet include several other foods. The present work underlines the need to adopt a holistic approach for multiple mycotoxins risk assessment integrating data from exposure, bioacessibility and toxicity domains in order to contribute to a more accurate risk assessment.

Regional differences of outpatient physician supply as a theoretical economic and empirical generalized linear model

BACKGROUND: Regional differences in physician supply can be found in many health care systems, regardless of their organizational and financial structure. A theoretical model is developed for the physicians' decision on office allocation, covering demand-side factors and a consumption time function. METHODS: To test the propositions following the theoretical model, generalized linear models were estimated to explain differences in 412 German districts. Various factors found in the literature were included to control for physicians' regional preferences. RESULTS: Evidence in favor of the first three propositions of the theoretical model could be found. Specialists show a stronger association to higher populated districts than GPs. Although indicators for regional preferences are significantly correlated with physician density, their coefficients are not as high as population density. CONCLUSIONS: If regional disparities should be addressed by political actions, the focus should be to counteract those parameters representing physicians' preferences in over- and undersupplied regions.

Quantifying the impacts of urban wind sheltering on the building energy consumption

Common building energy modeling approaches do not account for the influence of surrounding neighborhood on the energy consumption patterns. This thesis develops a framework to quantify the neighborhood impact on a building energy consumption based on the local wind flow. The airflow in the neighborhood is predicted using Computational Fluid Dynamics (CFD) in eight principal wind directions. The developed framework in this study benefits from wind multipliers to adjust the wind velocity encountering the target building. The input weather data transfers the adjusted wind velocities to the building energy model. In a case study, the CFD method is validated by comparing with on-site temperature measurements, and the building energy model is calibrated using utilities data. A comparison between using the adjusted and original weather data shows that the building energy consumption and air system heat gain decreased by 5% and 37%, respectively, while the cooling gain increased by 4% annually.

The study of the impact of demand controlled ventilation in energy consumption of offices in Portuguese commercial buildings

Indoor Air 2016 - The 14th International Conference of Indoor Air Quality and Climate

Saccharomyces cerevisiae as a toxicological model to study synthetic cannabinoids and its pyrolysis products

Poster presented at the 7th European Academy of Forensic Science Conference. Prague, 6-11 September 2015

Detecting Free Riders in Collective Brands through a Hierarchical Choice Process

Free-riding behaviors exist in tourism and they should be analyzed from a comprehensive perspective; while the literature has mainly focused on free riders operating in a destination, the destinations themselves might also free ride when they are under the umbrella of a collective brand. The objective of this article is to detect potential free-riding destinations by estimating the contribution of the different individual destinations to their collective brands, from the point of view of consumer perception. We argue that these individual contributions can be better understood by reflecting the various stages that tourists follow to reach their final decision. A hierarchical choice process is proposed in which the following choices are nested (not independent): “whether to buy,” “what collective brand to buy,” and “what individual brand to buy.” A Mixed Logit model confirms this sequence, which permits estimation of individual contributions and detection of free riders.

A SCR Model based on Reactor and Engine Experimental Studies for a Cu-zeolite Catalyst

A NOx reduction efficiency higher than 95% with NH3 slip less than 30 ppm is desirable for heavy-duty diesel (HDD) engines using selective catalytic reduction (SCR) systems to meet the US EPA 2010 NOx standard and the 2014-2018 fuel consumption regulation. The SCR performance needs to be improved through experimental and modeling studies. In this research, a high fidelity global kinetic 1-dimensional 2-site SCR model with mass transfer, heat transfer and global reaction mechanisms was developed for a Cu-zeolite catalyst. The model simulates the SCR performance for the engine exhaust conditions with NH3 maldistribution and aging effects, and the details are presented. SCR experimental data were collected for the model development, calibration and validation from a reactor at Oak Ridge National Laboratory (ORNL) and an engine experimental setup at Michigan Technological University (MTU) with a Cummins 2010 ISB engine. The model was calibrated separately to the reactor and engine data. The experimental setup, test procedures including a surrogate HD-FTP cycle developed for transient studies and the model calibration process are described. Differences in the model parameters were determined between the calibrations developed from the reactor and the engine data. It was determined that the SCR inlet NH3 maldistribution is one of the reasons causing the differences. The model calibrated to the engine data served as a basis for developing a reduced order SCR estimator model. The effect of the SCR inlet NO2/NOx ratio on the SCR performance was studied through simulations using the surrogate HD-FTP cycle. The cumulative outlet NOx and the overall NOx conversion efficiency of the cycle are highest with a NO2/NOx ratio of 0.5. The outlet NH3 is lowest for the NO2/NOx ratio greater than 0.6. A combined engine experimental and simulation study was performed to quantify the NH3 maldistribution at the SCR inlet and its effects on the SCR performance and kinetics. The uniformity index (UI) of the SCR inlet NH3 and NH3/NOx ratio (ANR) was determined to be below 0.8 for the production system. The UI was improved to 0.9 after installation of a swirl mixer into the SCR inlet cone. A multi-channel model was developed to simulate the maldistribution effects. The results showed that reducing the UI of the inlet ANR from 1.0 to 0.7 caused a 5-10% decrease in NOx reduction efficiency and 10-20 ppm increase in the NH3 slip. The simulations of the steady-state engine data with the multi-channel model showed that the NH3 maldistribution is a factor causing the differences in the calibrations developed from the engine and the reactor data. The Reactor experiments were performed at ORNL using a Spaci-IR technique to study the thermal aging effects. The test results showed that the thermal aging (at 800°C for 16 hours) caused a 30% reduction in the NH3 stored on the catalyst under NH3 saturation conditions and different axial concentration profiles under SCR reaction conditions. The kinetics analysis showed that the thermal aging caused a reduction in total NH3 storage capacity (94.6 compared to 138 gmol/m3), different NH3 adsorption/desorption properties and a decrease in activation energy and the pre-exponential factor for NH3 oxidation, standard and fast SCR reactions. Both reduction in the storage capability and the change in kinetics of the major reactions contributed to the change in the axial storage and concentration profiles observed from the experiments.

Development of a 1-D Catalyzed Diesel Particulate Filter Model for Simulation of the Performance and the Oxidation of Particulate Matter and Nitrogen Oxides Using Passive Oxidation and Active Regeneration Engine Experimental Data

Back-pressure on a diesel engine equipped with an aftertreatment system is a function of the pressure drop across the individual components of the aftertreatment system, typically, a diesel oxidation catalyst (DOC), catalyzed particulate filter (CPF) and selective catalytic reduction (SCR) catalyst. Pressure drop across the CPF is a function of the mass flow rate and the temperature of the exhaust flowing through it as well as the mass of particulate matter (PM) retained in the substrate wall and the cake layer that forms on the substrate wall. Therefore, in order to control the back-pressure on the engine at low levels and to minimize the fuel consumption, it is important to control the PM mass retained in the CPF. Chemical reactions involving the oxidation of PM under passive oxidation and active regeneration conditions can be utilized with computer numerical models in the engine control unit (ECU) to control the pressure drop across the CPF. Hence, understanding and predicting the filtration and oxidation of PM in the CPF and the effect of these processes on the pressure drop across the CPF are necessary for developing control strategies for the aftertreatment system to reduce back-pressure on the engine and in turn fuel consumption particularly from active regeneration. Numerical modeling of CPF's has been proven to reduce development time and the cost of aftertreatment systems used in production as well as to facilitate understanding of the internal processes occurring during different operating conditions that the particulate filter is subjected to. A numerical model of the CPF was developed in this research work which was calibrated to data from passive oxidation and active regeneration experiments in order to determine the kinetic parameters for oxidation of PM and nitrogen oxides along with the model filtration parameters. The research results include the comparison between the model and the experimental data for pressure drop, PM mass retained, filtration efficiencies, CPF outlet gas temperatures and species (NO2) concentrations out of the CPF. Comparisons of PM oxidation reaction rates obtained from the model calibration to the data from the experiments for ULSD, 10 and 20% biodiesel-blended fuels are presented.

Developing an Enhanced Model for Combined Heat and Air Infiltration Energy Simulation

The need for efficient, sustainable, and planned utilization of resources is ever more critical. In the U.S. alone, buildings consume 34.8 Quadrillion (1015) BTU of energy annually at a cost of $1.4 Trillion. Of this energy 58% is utilized for heating and air conditioning. Several building energy analysis tools have been developed to assess energy demands and lifecycle energy costs in buildings. Such analyses are also essential for an efficient HVAC design that overcomes the pitfalls of an under/over-designed system. DOE-2 is among the most widely known full building energy analysis models. It also constitutes the simulation engine of other prominent software such as eQUEST, EnergyPro, PowerDOE. Therefore, it is essential that DOE-2 energy simulations be characterized by high accuracy. Infiltration is an uncontrolled process through which outside air leaks into a building. Studies have estimated infiltration to account for up to 50% of a building’s energy demand. This, considered alongside the annual cost of buildings energy consumption, reveals the costs of air infiltration. It also stresses the need that prominent building energy simulation engines accurately account for its impact. In this research the relative accuracy of current air infiltration calculation methods is evaluated against an intricate Multiphysics Hygrothermal CFD building envelope analysis. The full-scale CFD analysis is based on a meticulous representation of cracking in building envelopes and on real-life conditions. The research found that even the most advanced current infiltration methods, including in DOE-2, are at up to 96.13% relative error versus CFD analysis. An Enhanced Model for Combined Heat and Air Infiltration Simulation was developed. The model resulted in 91.6% improvement in relative accuracy over current models. It reduces error versus CFD analysis to less than 4.5% while requiring less than 1% of the time required for such a complex hygrothermal analysis. The algorithm used in our model was demonstrated to be easy to integrate into DOE-2 and other engines as a standalone method for evaluating infiltration heat loads. This will vastly increase the accuracy of such simulation engines while maintaining their speed and ease of use characteristics that make them very widely used in building design.

Average-case analysis of power consumption in embedded systems

Power efficiency is one of the most important constraints in the design of embedded systems since such systems are generally driven by batteries with limited energy budget or restricted power supply. In every embedded system, there are one or more processor cores to run the software and interact with the other hardware components of the system. The power consumption of the processor core(s) has an important impact on the total power dissipated in the system. Hence, the processor power optimization is crucial in satisfying the power consumption constraints, and developing low-power embedded systems. A key aspect of research in processor power optimization and management is “power estimation”. Having a fast and accurate method for processor power estimation at design time helps the designer to explore a large space of design possibilities, to make the optimal choices for developing a power efficient processor. Likewise, understanding the processor power dissipation behaviour of a specific software/application is the key for choosing appropriate algorithms in order to write power efficient software. Simulation-based methods for measuring the processor power achieve very high accuracy, but are available only late in the design process, and are often quite slow. Therefore, the need has arisen for faster, higher-level power prediction methods that allow the system designer to explore many alternatives for developing powerefficient hardware and software. The aim of this thesis is to present fast and high-level power models for the prediction of processor power consumption. Power predictability in this work is achieved in two ways: first, using a design method to develop power predictable circuits; second, analysing the power of the functions in the code which repeat during execution, then building the power model based on average number of repetitions. In the first case, a design method called Asynchronous Charge Sharing Logic (ACSL) is used to implement the Arithmetic Logic Unit (ALU) for the 8051 microcontroller. The ACSL circuits are power predictable due to the independency of their power consumption to the input data. Based on this property, a fast prediction method is presented to estimate the power of ALU by analysing the software program, and extracting the number of ALU-related instructions. This method achieves less than 1% error in power estimation and more than 100 times speedup in comparison to conventional simulation-based methods. In the second case, an average-case processor energy model is developed for the Insertion sort algorithm based on the number of comparisons that take place in the execution of the algorithm. The average number of comparisons is calculated using a high level methodology called MOdular Quantitative Analysis (MOQA). The parameters of the energy model are measured for the LEON3 processor core, but the model is general and can be used for any processor. The model has been validated through the power measurement experiments, and offers high accuracy and orders of magnitude speedup over the simulation-based method.

A fuzzy clustering approach to a demand response model

This paper proposes a novel demand response model using a fuzzy subtractive cluster approach. The model development provides support to domestic consumer decisions on controllable loads management, considering consumers’ consumption needs and the appropriate load shape or rescheduling in order to achieve possible economic benefits. The model based on fuzzy subtractive clustering method considers clusters of domestic consumption covering an adequate consumption range. Analysis of different scenarios is presented considering available electric power and electric energy prices. Simulation results are presented and conclusions of the proposed demand response model are discussed.

A fuzzy clustering approach to a demand response model

This paper proposes a novel demand response model using a fuzzy subtractive cluster approach. The model development provides support to domestic consumer decisions on controllable loads management, considering consumers’ consumption needs and the appropriate load shape or rescheduling in order to achieve possible economic benefits. The model based on fuzzy subtractive clustering method considers clusters of domestic consumption covering an adequate consumption range. Analysis of different scenarios is presented considering available electric power and electric energy prices. Simulation results are presented and conclusions of the proposed demand response model are discussed.