Adição de chamote de velas de ignição inservíveis na obtenção de cerâmica branca a base de alumina

This work presents research into the addition of chamotte obtained from the ceramic isolator of unusable spark plugs in formulations of material mixes for standard white ceramic material with aluminum oxide bases. After the physical chemical characterization of the primary materials, standard clay and the chamotte, three mixtures were prepared with concentrations of 10, 20 and 30% chamotte by weight in relation to the standard clay. The test samples underwent heating at a rate of 30 0C/min to levels that included 100o , 200o , 300o, 400o, 500o e 600 0C and also we submitted to three distinct burn temperatures: 1450o, 1500o e 1550 0C, remaining at these temperatures for 2 hour periods. After sintering, the physical and microstructural properties of the different test samples were measured and analyzed. The results show that the materials obtained present good technical properties and that the chamotte can be reutilized as an additive in the production of white ceramic material with an aluminum oxide base

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

Morphological and physiological alterations induced by lactofen in soybean leaves are reduced with nitric oxide

O lactofen é um herbicida difeniléter recomendado para controlar plantas daninhas de folhas largas em campos de soja (Glycine max) e seu mecanismo de ação é a inibição da protoporfirinogênio-IX oxidase (Protox), que atua na biossíntese de clorofilas. Essa inibição resulta em um acúmulo de protoporfirina-IX, o que leva à produção de espécies reativas de oxigênio (ROS), causando estresse oxidativo. Conseqüentemente, podem ocorrer manchas, enrugamento e queima das folhas, o que leva à paralisação temporária do crescimento da cultura. Porém, o óxido nítrico (NO) atua como um antioxidante na eliminação direta das ROS. Assim, o objetivo deste trabalho foi verificar, por meio de avaliações fitométricas e bioquímicas, o efeito protetor do NO em plantas de soja tratadas com o herbicida lactofen. Plantas de soja foram pré-tratadas com diferentes doses de Nitroprussiato de Sódio (SNP), substância doadora de NO, e então pulverizadas com 168 g a.i. ha-1 lactofen. O pré-tratamento com SNP foi benéfico, pois o NO reduziu os sintomas de injúria causados pelo lactofen nos folíolos jovens e manteve baixos teores de açúcares solúveis. Porém, o NO proporcionou crescimento mais lento das plantas. Desta forma, posteriores estudos são necessários para elucidar os mecanismos de ação do NO na sinalização do estresse promovido pelo lactofen na cultura da soja.

In-process grinding monitoring by acoustic emission

This work aims to investigate the efficiency of digital signal processing tools of acoustic emission signals in order to detect thermal damages in grinding process. To accomplish such a goal, an experimental work was carried out for 15 runs in a surface grinding machine operating with an aluminum oxide grinding wheel and ABNT 1045. The acoustic emission signals were acquired from a fixed sensor placed on the workpiece holder. A high sampling rate data acquisition system at 2.5 MHz was used to collect the raw acoustic emission instead of root mean square value usually employed. Many statistics have shown effective to detect burn, such as the root mean square (RMS), correlation of the AE, constant false alarm (CFAR), ratio of power (ROP) and mean-value deviance (MVD). However, the CFAR, ROP, Kurtosis and correlation of the AE have been presented more sensitive than the RMS.

Automatic detection of thermal damage in grinding process by artificial neural network

Esse trabalho tem por objetivo o desenvolvimento de um sistema inteligente para detecção da queima no processo de retificação tangencial plana através da utilização de uma rede neural perceptron multi camadas, treinada para generalizar o processo e, conseqüentemente, obter o limiar de queima. em geral, a ocorrência da queima no processo de retificação pode ser detectada pelos parâmetros DPO e FKS. Porém esses parâmetros não são eficientes nas condições de usinagem usadas nesse trabalho. Os sinais de emissão acústica e potência elétrica do motor de acionamento do rebolo são variáveis de entrada e a variável de saída é a ocorrência da queima. No trabalho experimental, foram empregados um tipo de aço (ABNT 1045 temperado) e um tipo de rebolo denominado TARGA, modelo ART 3TG80.3 NVHB.

Analysis of forecasting capabilities of ground surfaces valuation using artificial neural networks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de defeitos e diferentes processos de fabricação nas propriedades mecânicas finais de cerâmicas

Os materiais cerâmicos são atualmente cada vez utilizados como opção na engenharia mundial. Por se tratar de materiais com alta resistência mecânica, possuem muitas aplicações em diversas áreas, como por exemplo a de mancais, a automotiva (sensores, isoladores, catalisadores, pistões, válvulas, revestimentos), a de implantes biocompatíveis (dentário, substituição óssea, válvulas cardíacas), a de produtos sujeitos ao desgaste (guias), a de refratários (revestimento de equipamento bélico, componentes de fornos), a eletrônica, e outras. Nos processos de fabricação da cerâmica há uma gama de fatores que contribuem para as características do produto final. Devido a isso, muitos pesquisadores têm trabalhado no estudo da influência de determinados defeitos e técnicas de produção de cerâmicas nas características do produto final. Este trabalho tem como objetivo fazer uma revisão bibliográfica de recentes artigos que analisam a influência de fatores como velocidade de queima, surgimento de trincas, porosidade, fases cristalinas, e tamanho de partículas, nas propriedades mecânicas finais das cerâmicas. Pode-se concluir que é possível aperfeiçoar o processo de fabricação da cerâmica a fim de promover as melhores propriedades mecânicas possíveis, conhecendo-se fatores prejudiciais e métodos adequados para se obter o melhor produto final.

Log smoldering after an Amazonian deforestation fire

The characteristics of log smoldering after an Amazonian deforestation fire are described. The experiment was carried out in 2001 at the Caiabi farm, near the city of Alta Floresta, state of Mato Grosso, Brazil, as part of a set of tests that have been performed in the same area since 1997. A 200 x 200m(2) test area was slashed in the beginning of June and burned on 20 August. The area contained 507 logs with diameter at breast height (DBH) higher than 10 cm, per hectare. In the day following the main burn 59 logs were found to remain smoldering, a number that corresponds to 2.9% of the total in the area. We chose 11 of the 59 logs to have their smoldering process monitored. Their diameter, moisture content and CHN dry biomass composition after the plot burn and before smoldering were determined. Other parameters such as temperature distribution while smoldering, porosity, density and mass volatilized during thermogravimetric test were also determined. Average smoldering speeds were in the range from 0.8 to 1.5 cm h(-1) for logs that smoldered without transition to the flaming regime. The average speed increased to 2.1 cm h(-1) for those logs that oscillated between smoldering and flaming. The speeds were lower overnight as compared to values determined during daytime for the same log. Higher log moisture contents were found to produce decreased speeds. Micro-porous biomass was not observed in the set of the 11 selected logs. Smoldering was observed to occur at substantial intensity in crossing of logs, with no longitudinal propagation. (C) 2003 Elsevier Ltd. All rights reserved.

Ecological impacts from syngas burning in internal combustion engine: Technical and economic aspects

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Laboratory evaluation of Amazon forest biomass burning emissions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biomass consumption and CO2, CO and main hydrocarbon gas emissions in an Amazonian forest clearing fire

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Matrizes poliméricas puras e modificadas para adsorção do gás sulfeto de hidrogênio

The underground natural gas found associated or not with oil is characterized by a mixture of hydrocarbons and residual components such as carbon dioxide (CO2), nitrogen gas (N2) and hydrogen sulfide (H2S), called contaminants. The H2S especially promotes itself as a contaminant of natural gas to be associated with corrosion of pipelines, to human toxicity and final applications of Natural Gas (NG). The sulfur present in the GN must be fully or partially removed in order to meet the market specifications, security, transport or further processing. There are distinct and varied methods of desulfurization of natural gas processing units used in Natural Gas (UPGN). In order to solve these problems have for example the caustic washing, absorption, the use of membranes and adsorption processes is costly and great expenditure of energy. Arises on such findings, the need for research to active processes of economic feasibility and efficiency. This work promoted the study of the adsorption of sulfide gas in polymer matrices hydrogen pure and modified. The substrates of Poly(vinyl chloride) (PVC), poly(methyl methacrylate) (PMMA) and sodium alginate (NaALG) were coated with vanadyl phosphate compounds (VOPO4.2H2O), vanadium pentoxide (V2O5), rhodamine B (C28H31N2O3Cl) and ions Co2+ and Cu2+, aiming to the adsorption of hydrogen sulfide gas (H2S). The adsorption tests were through a continuous flow of H2S in a column system (fixed bed reactor) adsorption on a laboratory scale. The techniques used to characterize the adsorbents were Infrared spectroscopy (FTIR), thermogravimetry analysis (TGA), X-ray fluorescence (XRF), the X-ray diffraction (XRD) electron microscopy (SEM). Such work indicates, the results obtained, the adsorbents modified PMMA, PVC and NaALG have a significant adsorptive capacity. The matrix that stood out and had the best adsorption capacity, was to ALG modified Co2+ with a score of 12.79 mg H2S / g matrix

Ação educativa sobre queimaduras infantis para familiares de crianças hospitalizadas

OBJETIVO: Analisar o potencial informativo de uma ação educativa sobre queimaduras infantis com responsáveis por crianças internadas em ambiente hospitalar. MÉTODOS: Foram aplicados questionários estruturados, antes e imediatamente após a ação educativa, que incluiu intervenções verbais e folheto educativo, em 37 acompanhantes de crianças e adolescentes internados no Setor Público de Pediatria de dois hospitais de uma cidade do interior do Estado de São Paulo. As informações obtidas antes e após a ação educativa foram comparadas, utilizando-se o teste estatístico do quiquadrado e considerando-se significante p<0,05. RESULTADOS: Na comparação pré- e pós-ação educativa, notou-se aumento de 95% para 100% na indicação da residência como local mais propício para ocorrência de queimaduras infantis; de 46% para 78% na indicação da faixa etária mais acometida (zero a três anos); de 76% para 78% no gênero mais acometido (masculino); de 43% para 78% na indicação do principal agente agressor (água quente); de 32% para 78% na região corporal mais atingida (tórax); e de 89% para 97% na possibilidade de prevenção da queimadura infantil. CONCLUSÕES: A ação educativa mostrou bom potencial informativo pela elevação do percentual de respostas corretas em todos os aspectos apresentados, sugerindo sua utilidade no contexto hospitalar e em outros locais, como unidades de atenção primária e secundária à saúde e instituições de educação infantil e superior.

Ascorbic acid degradation kinetics in tomatoes at different drying conditions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Experimental aspects of biomass fuels in a bubbling fluidized bed combustor

This work presents experimental information relevant to the combustion of biomass in a bubbling fluidized bed. The biomass distribution in a fluidized bed was studied through tests performed in a cold bed, while the volatiles released in the biomass pyrolysis, the burning rate of the resulting charcoal, and the combustion control regime, were studied through tests performed in a high temperature bed.Visual examination of photographs taken from a transparent walls bed, with a rectangular cross-section, showed that the large fuel particles, typical of biomass processing, were distributed in the bubbles, in the splash zone, and in the emulsion phase. The occurrence of biomass in the emulsion phase was favored by burning biomass particles of greater density and smaller size-expetimentally determined in each case. Decreasing the fuel particle size improved the biomass distribution inside the bed. The same was accomplished by increasing the superficial gas velocity as high as possible, compatibly with the acceptable elutriation.Burning tests showed that the biomass fuels have the advantage of reaching the diffusional regime at temperatures that can be lower than 1000 K, which ensures that the biomass fuels burn in a stable regime. (C) 2007 Elsevier B.V. All rights reserved.