Thermoelastic Stresses in SiC Single Crystals Grown by the Physical Vapor Transport Method

A finite element-based thermoelastic anisotropic stress model for hexagonal silicon carbide polytype is developed for the calculation of thermal stresses in SiC crystals grown by the physical vapor transport method. The composite structure of the growing SiC crystal and graphite lid is considered in the model. The thermal expansion match between the crucible lid and SiC crystal is studied for the first time. The influence of thermal stress on the dislocation density and crystal quality is discussed.

Thermal mismatch stress in SiC whisker reinforced aluminium composite: new measurement method by X-ray diffraction

A new X-ray diffraction method for characterising thermal mismatch stress (TMS) in SiC_w–Al composite has been developed. The TMS and thermal mismatch strain (TMSN) in SiC whiskers are considered to be axis symmetrical, and can be calculated by measuring the lattice distortion of the whiskers. Not only the average TMS in whiskers and matrix can be obtained, but the TMS components along longitudinal and radial directions in the SiC whiskers can also be deduced. Experimental results indicate that the TMS in SiC whiskers is compressive, and tensile in the aluminium matrix. The TMS and TMSN components along the longitudinal direction in the SiC whiskers are greater than those along the radial direction for a SiC_w–Al composite quenched at 500°C.

Evaluation of termination techniques for 4H-SiC PiN diodes and trench JFETs

An investigation concerning suitable termination techniques for 4H-SiC trench JFETs is presented. Field plates, p+ floating rings and junction termination extension techniques are used to terminate 1.2kV class PiN diodes. The fabricated PiN diodes evaluated here have a similar design to trench JFETs. Therefore, the conclusions for PiN diodes can be applied to JFET structures as well. Numerical simulations are also used to illustrate the effect of the terminations on the diodes' blocking mode behaviour.

Effect of hydrogen dilution on the deposition of carbon-rich a-SiC:H films by the electron cyclotron resonance method

The deposition of hydrogenated amorphous silicon carbide (a-SiC:H) films from a mixture of silane, acetylene and hydrogen gas using the electron cyclotron resonance chemical vapour deposition (ECR-CVD) process is reported. The variation in the deposition and film characteristics such as the deposition rate, optical band gap and IR absorption as a function of the hydrogen dilution is investigated. The deposition rate increases to a maximum value of about 250 Å min-1 at a hydrogen dilution ratio of about 20 (hydrogen flow (sccm)/acetylene + silane flow (sccm)) and decreases in response to a further increase in the hydrogen dilution. There is no strong dependence of the optical band gap on the hydrogen dilution within the dilution range investigated (10-60) and the optical band gap calculated from the E04 method varied marginally from about 2.85 to 3.17 eV. The room temperature photoluminescence (PL) peak energy and intensity showed a prominent shift to a maximum value of about 2.17 eV corresponding to maximum PL intensity at a moderate hydrogen dilution of about 30. The PL intensity showed a strong dependence on the hydrogen dilution variation.

A microstructural investigation of deformation in fine SiC particulate- and whisker-reinforced aluminium-matrix composites

Aluminium-based composites, reinforced with low volume fractions of whiskers and small particles, have been formed by a powder route. The materials have been tested in tension, and the microstructures examined using transmission electron microscopy. The whisker composites showed an improvement in flow stress over the particulate composites, and this was linked to an initially enhanced work-hardening rate in the whisker composites. The overall dislocation densities were estimated to be somewhat higher in the whisker composites than the particulate composites, but in the early stages of deformation the distribution was rather different, with deformation in the whisker material being far more localized and inhomogeneous. This factor, together with differences in the internal stress distribution in the materials, is used to explain the difference in mechanical properties.

Impossibilità di pensare Dio non esistente : il Proslogion di Anselmo d'Aosta come applicazione implicita dei moderni procedimenti di logica aletica

Resumen: La vera intenzione teologica di Anselmo d’Aosta nello scrivere il Proslogion e il vero significato del suo celebre unum argumentum vanno visti nella funzione che la ragione svolge necessariamente all’interno della vita di fede del cristiano. Anselmo, come Tommaso d’Aquino, non sostiene che l’esistenza di Dio sia un “articulus fidei” ma piuttosto uno dei “praeambula fidei”. La ragione naturale ha la certezza che Dio esiste, ancora prima della dimostrazione metafisica, e questo non fa che confermare l’assurdità di pensare che non esista il fondamento reale di tutte le cose esistenti.

Influencia de diferentes dosis de productos inductores de la floración (Carburo de calcio y ethrell), en dos variedades de piña (Ananas comosus (L) Merril) sobre la calidad post-cosecha

El presente estudio se estableció entre el 25 y 26 de Octubre del año 2002, con el objetivo de conocer la influencia de los productos hormonales inductores de la floración de la piña sobre la calidad post-cosecha. En los Rios (Ticuantepe) con la variedad Cayena lisa y en Mirazul del Llano (Masatepe) con la variedad Monte lirio. El diseño experimental fue un bifactorial en bloques completos al azar (BCA). Factor A, productos: Carburo de calcio, Etrhell y la combinación de ambos. Factor B, dosis de 30 y 50 cc. El área de las parcelas experimentales para cada variedad fue de 223.2 m2 con una población estimada de 864 plantas. En la calidad interna para la variedad Cayena lisa, los mayores valores fueron 12.45 porciento grados brix y 4.15 pH obtenidos con el producto Carburo de calcio más Urea y con la dosis de 50 cc. En la variedad Monte lirio 6.79 porciento grados brix con Ethrell y con la dosis de 30 cc; el pH fue de 4.43 con Carburo de calcio más Urea, con la dosis de 50 cc. En la calidad externa los frutos con mayores valores se obtuvieron en la variedad Monte lirio, la altura obtenida fue de 18 .63 cm con Carburo de calcio más Urea y con la dosis de 50 cc, el diámetro fue de 13.29 cm obtenido con Ethrell y la dosis de 30 cc, el peso fue de 2,282.70 g. obtenido con Carburo de calcio más Urea y con la dosis de 50 cc; el peso de la corona más bajo fue de 107.65 g. obtenido con Carburo de calcio más Ethrell y la dosis de 30 cc. En la variedad Cayena lisa la mayor altura fue de 16.55 cm obtenida con Ethrell y la dosis de 30 cc; el diámetro fue de 11.16 cm obtenido con Carburo de calcio más Ethrell y la dosis de 50 cc; el peso fue de 1,397.00 g. obtenido con Ethrell y la dosis de 30 cc, el peso de la corona más bajo fue de 102.60 g. obtenido con Ethrell y la dosis de 50 cc. Económicamente el tratamiento de menor costo, con mayor beneficio neto y con mejores resultados en la calidad post-cosecha es el Carburo de calcio más Urea en dosis de 50 cc.

Failure of SiC particulate-reinforced metal matrix composites induced by laser thermal shock

Thermal failure of SiC particulate-reinforced 6061 aluminum alloy composites induced by both laser thermal shock and mechanical load has been investigated. The specimens with a single-edge notch were mechanically polished to 0.25 mm in thickness. The notched-tip region of the specimen is subjected to laser beam rapid heating. In the test, a pulsed Nd:glass laser beam is used with duration 1.0 ms or 250 mu s, intensity 15 or 70 kW/cm(2), and spot size 5.0 mm in diameter. Threshold intensity was tested and fracture behavior was studied. The crack-tip process zone development and the microcrack formation were macroscopically and microscopically observed. It was found that in these materials, the initial crack occurred in the notched-tip region, wherein the initial crack was induced by either void nucleation, growth, and subsequent coalescence of the matrix materials or separation of the SiC particulate-matrix interface. It was further found that the process of the crack propagation occurred by the fracture of the SiC particulates.

La distruzione delle statue di Pausania nella Sparta tardoantica (Lib. Ep. 1518)

Abstract: The late antique destruction of two bronze statues of Pausanias - the Spartan general responsible for the Greek victory at the Battle of Plataea (479 BC) - housed in the temple of Athena Chalkioikos in Sparta (Lib. Ep. 1518), has been interpreted as one of the few cases of a violent conflict between pagan and Christian population in Greece. Nevertheless the sources suggest that late antique Sparta was a bastion of Hellenic paganism and give a picture of a small and quiet town ruled by a pagan educated élite, where pagans like Libanius wanted to live. Since there is no evidence of a violent conflict between pagans and Christians in Sparta, and Libanius confirms that in 365 AD all the temples and cult statues were still in place, this paper addresses the issue from a different point of view and offers a new contribution to the history of Sparta in Late Antiquity. By using literary, archaeological and epigraphic evidence the paper explores: 1) the relationship between Roman administration and Spartan élite in the IVth century AD; 2) the historical memory of Pausanias in Late Antiquity. It will be emphasized that the obscure burning of the two statues helped to remove from Sparta the memory of Pausanias - a controversial figure, misrepresented in Late Antiquity and connected to the ancient staseis in Laconia - in order to promote a positive image of Sparta as a city without conflicts and ruled by the political system of Lycurgus (eunomia). As documented by local inscriptions in praise of late Roman governors, the mythical lawgiver Lycurgus was the paradigm of the imperial governors who rebuilded the town in the IVth cent. AD. It can be assumed that while Rome, Constantinople, Antioch and Athens were troubled by political and religious violence or by seditions between different factions, Sparta aimed to revive its traditional model of civic order in the new historical context of Late Antiquity.

A nanoindentation analysis of the effects of microstructure on elastic properties of Al2O3/SiC composites

Nanoindentation tests were carried out to investigate certain elastic properties of Al2O3/SiCp composites at microscopic scales (nm up to mu m) and under ultra-low loads from 3 mN to 250 mN, with special attention paid to effects caused by SiC particles and pores. The measured Young's modulus depends on the volume fraction of SiC particles and on the composite porosity and it can compare with that of alumina. The Young's modulus exhibits large scatters at small penetrations, but it tends to be constant with lesser dispersion as the indentation depth increases. Further analysis indicated that the scatter results from specific microstructural heterogeneities. The measured Young's moduli are in agreement with predictions, provided the actual role of the microstructure is taken into account. (C) 2007 Elsevier Ltd. All rights reserved.

Evaluación de la eficacia de la técnica de floating system para la producción de radicchio rosso var. di Verona en condiciones controladas

La técnica de producción en Floating system constituye una alternativa económica y veloz de producción en hidroponia. Este sistema permite obtener hojas de vegetales de pequeño tamaño “Baby leaf” listas para consumir (IV Gama), cuyo consumo a nivel mundial muestra una tendencia creciente. Dicha técnica no se encuentra aún muy difundida para la producción de radicchio rosso. El objetivo de este trabajo fue evaluar el efecto del tamaño de celda, del substrato y de la técnica de floating system sobre la producción de radicchio. Los ensayos se realizaron en cámara a 25 ºC con un fotoperíodo de 16 hs de luz y 8 de oscuridad y con una intensidad de luz de 10 000 Lux. Se utilizó un diseño experimental factorial totalmente aleatorizado, con 5 repeticiones y 3 factores, cuyos niveles fueron: 1) Tamaño de celda, (T), con 3 niveles: grande, mediano y pequeño, 2) Técnica de producción, (F), con 2 niveles: floating system y sistema convencional, 3) Sustrato, (S), con 2 niveles: vermiculita y mezcla. Se analizaron las siguientes variables: 1) peso fresco, 2) peso seco, 3) largo de planta, 4) número de hojas y 5) área foliar. Los resultados obtenidos resultan alentadores respecto del empleo de la técnica de floating system. Para la obtención de plántulas con calidad de IV Gama resulta más conveniente el empleo de celdas de 80 cm3 y sustrato mezcla.