Influence of crown-to-implant ratio, retention system, restorative material, and occlusal loading on stress concentrations in single short implants

Purpose: The aim of this study was to assess the contributions of some prosthetic parameters such as crown-to-implant (C/I) ratio, retention system, restorative material, and occlusal loading on stress concentrations within a single posterior crown supported by a short implant. Materials and Methods: Computer-aided design software was used to create 32 finite element models of an atrophic posterior partially edentulous mandible with a single external-hexagon implant (5 mm wide × 7 mm long) in the first molar region. Finite element analysis software with a convergence analysis of 5% to mesh refinement was used to evaluate the effects of C/I ratio (1:1; 1.5:1; 2:1, or 2.5:1), prosthetic retention system (cemented or screwed), and restorative material (metal-ceramic or all ceramic). The crowns were loaded with simulated normal or traumatic occlusal forces. The maximum principal stress (σmax) for cortical and cancellous bone and von Mises stress (σvM) for the implant and abutment screw were computed and analyzed. The percent contribution of each variable to the stress concentration was calculated from the sum of squares analysis. Results: Traumatic occlusion and a high C/I ratio increased stress concentrations. The C/I ratio was responsible for 11.45% of the total stress in the cortical bone, whereas occlusal loading contributed 70.92% to the total stress in the implant. The retention system contributed 0.91% of the total stress in the cortical bone. The restorative material was responsible for only 0.09% of the total stress in the cancellous bone. Conclusion: Occlusal loading was the most important stress concentration factor in the finite element model of a single posterior crown supported by a short implant.

Idosos e embalagens alimentares: avaliação do design ergonómico de informação

The packaging often presents faults that difficult the communication between product and consumer. The aim of this research is to study the interaction between a group of elderly people with five food packagings, that being illinterpreted, can bring them health problems. The results of this study evidence the importance of ergonomics in graphic design for food packaging.

Efeitos da administração de eritropoietina na dislipidemia e na hipertrofia ventricular esquerda de camundongos hiperlipidêmicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de métodos de proteção para taludes em estrada não-pavimentada

This work presents the results of the efficiency of three protection methods of roads slopes, against the development of erosion processes.The methods anlyzed were: (1) grass planting "San Carlos" (Axonopus compressus), (2) litter, composed of remains of branches and leaves of eucalyptus E. Grandis, and (3) Compacted soil cover with a local soil with properties more resistant to erosion processes.The experiment consisted of assembly of four rectangular cells with 6 meters, three for protection systems in study and one was kept unprotected to evaluate the efficiency of the methods in study.The determination of the amount of eroded sediment was based on the sum of the solids in suspension and stored sediments in the geotextile bags.The results showed that, compared to the unprotected cell, the litter obtained a reduction of soil loss of 90%, while the grass enveloped and reduced 80% and 65% respectively.

Load models support sustainable: planning for Brazil s reservoir aquaculture

Cage aquaculture in hydroelectric reservoirs has great potential for expansion in Brazil, but there are concerns of negative environmental impacts. The environmental sustainability of cage culture depends on hamornization between farming practices and the hydrological peculiarities of the site. Mass balance modeling can estimate the amounts of nutrients that can be loaded without triggering eutrophication and resulting maximum allowable production volume. Careful climate zoning can also assist proper siting.

Evaluation of helminths associated with 14 amphibian species from a Neotropical island near the southeast coast of Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Inovação tecnológica de boas práticas agrícolas e a informática na gestão agropecuária

This study aims to develop innovative proposals for production agriculture management and plans to build a participatory model, through the digital inclusion of members of the family farm gathered in a cooperative venture seeking to establish new environmental management efficiency for household production. The first part of the hypothesis assumes that a major obstacle to the insertion of small family farms into the markets is skilled labor, human capital. A training model has been developed for traceability and tracking activities on family farms, based on the atemoya culture. The second hypothesis predicts that it is possible to create a model that is scientifically supported by widely accepted rules derived from GlobalGAP standard certification, a global benchmark for good agricultural practices. Using these rules the model seeks to achieve the traceability of agricultural products and operations from the preservation of identity information within the production chain. The results obtained by the computerized system confirmed the presented hypotheses by demonstrating that technological innovation through intensive communication and information technologies education as well as other associated forms are important drivers of regional development, especially if implemented through a digital inclusion project using the state program Infocentros Access São Paulo.

Adubação orgânica e fertirrigação potássica em videira Syrah no Semiárido

Apesar da grande importância da adubação na qualidade das uvas, ainda existem poucos estudos sobre a fertirrigação em videira de vinho no Vale do Submédio São Francisco. Com o objetivo de avaliar a produção de uvas sob a influência de doses de potássio e de adubo orgânico, um experimento foi realizado na Embrapa Semiárido, em Petrolina-PE, com videiras (Vitis vinifera L.), ‘Syrah’, enxertadas sobre o porta-enxerto ‘Paulsen’ 1103 e cultivadas no espaçamento 3 x 1 m. As plantas foram irrigadas por um sistema de gotejamento, com um emissor por planta, com vazão de 2 L h¹. Os tratamentos foram constituídos de cinco doses de potássio (0, 20, 40, 80 e 160 kg ha¹) e duas doses de adubo orgânico (0 e 7,5 m³ qual o adubo orgânico constituiu as parcelas e as doses de potássio as subparcelas. Foram avaliados na colheita o número de cachos por planta, a produção total por planta, o peso médio dos cachos e o rendimento total das plantas. As diferentes doses de potássio aplicadas pelo sistema de irrigação e de adubo orgânico aplicados via solo não influenciaram significativamente as características avaliadas.

Análise de um trocador de calor tipo serpentina de uma planta de hipoclorito de sódio

This study aims to analyze the capacity of a helical coil heat exchanger to reach the requested heat transfer rates by a sodium hypochlorite production process. This heat exchanger was installed in an experimental way in order to reuse a source of low-temperatures water in such a way to become a more economical alternative than the existing cooling tower. Firstly, the concepts related to the theory of heat transfer applicable to the case were introduced. Then, the mapping of the main information about the production process and the technical specification of the current cooling system equipment's was realized. Using the dimensions of the heat exchanger installed today as reference, the calculations for determining the ideal length of the coil to different flows of hot fluid were performed. Finally, it was concluded that the heat exchanger currently employed does not provide heat transfer rates required for the maximum flow rate value supported by the cooling tower

Análise de diversidade e expressão de retrotransposons ativos em espécies de Coffea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise organizacional de acidentes de trabalho no setor de distribuição de energia elétrica

Pós-graduação em Saúde Coletiva - FMB

Análise de um trocador de calor tipo serpentina de uma planta de hipoclorito de sódio

This study aims to analyze the capacity of a helical coil heat exchanger to reach the requested heat transfer rates by a sodium hypochlorite production process. This heat exchanger was installed in an experimental way in order to reuse a source of low-temperatures water in such a way to become a more economical alternative than the existing cooling tower. Firstly, the concepts related to the theory of heat transfer applicable to the case were introduced. Then, the mapping of the main information about the production process and the technical specification of the current cooling system equipment's was realized. Using the dimensions of the heat exchanger installed today as reference, the calculations for determining the ideal length of the coil to different flows of hot fluid were performed. Finally, it was concluded that the heat exchanger currently employed does not provide heat transfer rates required for the maximum flow rate value supported by the cooling tower

Análise de diversidade e expressão de retrotransposons ativos em espécies de Coffea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise organizacional de acidentes de trabalho no setor de distribuição de energia elétrica

Pós-graduação em Saúde Coletiva - FMB