A comparative review of water disinfection methods appropriate for developing countries and their efficacy, cost-efficiency, and usability

Developing countries are heavily burdened by limited access to safe drinking water and subsequent water-related diseases. Numerous water treatment interventions combat this public health crisis, encompassing both traditional and less-common methods. Of these, water disinfection serves as an important means to provide safe drinking water. Existing literature discusses a wide range of traditional treatment options and encourages the use of multi-barrier approaches including coagulation-flocculation, filtration, and disinfection. Most sources do not delve into approaches specifically appropriate for developing countries, nor do they exclusively examine water disinfection methods.^ The objective of this review is to focus on an extensive range of chemical, physio-chemical, and physical water disinfection techniques to provide a compilation, description and evaluation of options available. Such an objective provides further understanding and knowledge to better inform water treatment interventions and explores alternate means of water disinfection appropriate for developing countries. Appropriateness for developing countries corresponds to the effectiveness of an available, easy to use disinfection technique at providing safe drinking water at a low cost.^ Among chemical disinfectants, SWS sodium hypochlorite solution is preferred over sodium hypochlorite bleach due to consistent concentrations. Tablet forms are highly recommended chemical disinfectants because they are effective and very easy to use, but also because they are stable. Examples include sodium dichloroisocyanurate, calcium hypochlorite, and chlorine dioxide, which vary in cost depending on location and availability. Among physio-chemical disinfection options, electrolysis which produces mixed oxidants (MIOX) provides a highly effective disinfection option with a higher upfront cost but very low cost over the long term. Among physical disinfection options, solar disinfection (SODIS) applications are effective, but they treat only a fixed volume of water at a time. They come with higher initial costs but very low on-going costs. Additional effective disinfection techniques may be suitable depending on the location, availability and cost.^

Permeable coral reef sediment dissolution driven by elevated pCO2 and pore water advection

Ocean acidification (OA) is expected to drive the transition of coral reef ecosystems from net calcium carbonate (CaCO3) precipitating to net dissolving within the next century. Although permeable sediments represent the largest reservoir of CaCO3 in coral reefs, the dissolution of shallow CaCO3 sands under future pCO2 levels has not been measured under natural conditions. In situ, advective chamber incubations under elevated pCO2 (~800 µatm) shifted the sediments from net precipitating to net dissolving. Pore water advection more than doubled dissolution rates (1.10 g CaCO3/m**2/day) when compared to diffusive conditions (0.42 g CaCO3/m**2 /day). Sediment dissolution could reduce net ecosystem calcification rates of the Heron Island lagoon by 8% within the next century, which is equivalent to a 25% reduction in the global average calcification rate of coral lagoons. The dissolution of CaCO3 sediments needs to be taken into account in order to address how OA will impact the net accretion of coral reefs under future predicted increases in CO2.

Direct effects of increased CO2 concentrations in seawater on the net primary production of charophytes in a shallow, coastal, brackish-water ecosystem

Charophytes are found in fresh and brackish waters across the globe and play key roles in coastal ecosystems. However, their response to increasing CO2 is not well understood. The aim of the study was to detect the effects of elevated CO2 on the physiology of charophyte species growing in the brackish Baltic Sea by measuring net primary production. Mesocosm experiments were conducted in the Kõiguste Bay (N Gulf of Riga) during the field season of 2012. Separate mesocosms were maintained at different pCO2 levels: 2000, 1000 and 200 µatm. The experiments were carried out with three species of charophytes: Chara aspera, C. tomentosa and C. horrida. The short-term photosynthetic responses of charophytes to different treatments were measured by the oxygen method. The results show that elevated CO2 levels in brackish water may enhance the photosynthetic activity of charophyte species and suggest that increasing CO2 in the Baltic Sea could have implications for interspecific competition and community structure in a future high CO2 world.

Geochemical fingerprints and controls in the sediments of an urban river: River Manzanares, Madrid (Spain)

The geochemical fingerprint of sediment retrieved from the banks of the River Manzanares as it passes through the City of Madrid is presented here. The river collects the effluent water from several Waste Water Treatment (WWT) plants in and around the city, such that, at low flows, up to 60% of the flow has been treated. A total of 18 bank-sediment cores were collected along the course of the river, down to its confluence with the Jarama river, to the south–east of Madrid. Trace and major elements in each sample were extracted following a double protocol: (a) “Total” digestion with HNO3, HClO4 and HF; (b) “Weak” digestion with sodium acetate buffered to pH=5 with acetic acid, under constant stirring. The digests thus obtained were subsequently analysed by ICP-AES, except for Hg which was extracted with aqua regia and sodium chloride-hydroxylamine sulfate, and analysed by Cold Vapour-AAS. X-ray diffraction was additionally employed to determine the mineralogical composition of the samples. Uni- and multivariate analyses of the chemical data reveal the influence of Madrid on the geochemistry of Manzanares' sediments, clearly manifested by a marked increase in the concentration of typically “urban” elements Ag, Cr, Cu, Pb and Zn, downstream of the intersection of the river with the city's perimeter. The highest concentrations of these elements appear to be associated with illegal or accidental dumping of waste materials, and with the uncontrolled incorporation of untreated urban runoff to the river. The natural matrix of the sediment is characterised by fairly constant concentrations of Ce, La and Y, whereas changes in the lithology intersected by the river cause corresponding variations in Ca–Mg and Al–Na contents. In the final stretch of the river, the presence of carbonate materials seems to exert a strong geochemical control on the amount of Zn and, to a lesser extent, Cu immobilised in the sediments. This fact suggests that a variable but significant proportion of both elements may be susceptible to reincorporation in the aqueous phase under realistic environmental conditions.

Influencia de los fármacos presentes en el agua residual sobre la resistencia de la bacteria Escherichia coli y su eliminación por oxidación avanzada

Los fármacos en el agua han sido considerados en los últimos años un problema medioambiental grave, y se ha incrementado el interés por los efectos que pueden producirse en el medio acuático. Aunado a este problema se encuentra el consumo excesivo de medicamentos no controlados, los cuales pueden ser desechados sin tener el tratamiento adecuado; por lo que se ingresan a los cursos de agua. Estos contaminantes emergentes son compuestos cuyo vertido supone un problema sanitario y ambiental. Se trata de contaminantes solubles en agua por lo que son capaces de estar presentes en todas las etapas del ciclo del agua. Han sido numerosos estudios los que se han realizado en diferentes países, ya que su presencia se ha convertido en un tema emergente en la química del medio ambiente, debido a que en las investigaciones realizadas muestran que no hay una eliminación completa a pesar de los distintos procesos que se aplican en las plantas de tratamiento de aguas residuales. Esta contaminación, incrementa la necesidad de conocer cuál es el efecto toxicológico sobre los organismos acuáticos y, en consecuencia, en las personas. La bacteria Escherichia Coli, es un organismo muy estudiado, debido a que se encuentra en los intestinos de los animales y humanos y por lo consiguiente en las aguas negras. Teniendo en cuenta la crítica situación, se planteó estudiar el efecto sobre la bacteria E. coli de 4 fármacos: Atenolol, Azitromicina, Estradiol e Ibuprofeno, para conocer cual era su comportamiento y el efecto que podían producir la presencia de los fármacos en la eliminación por procesos de oxidación. Así también, los efectos producidos sobre E. Coli, después de estar en contacto con los fármacos 1, 3 y 7 días. Se observó que los fármacos tienen efectos en el aumento o eliminación de los microrganismos dependiendo de los tiempos de exposición y la concentración del fármaco. Así mismo se observó que los microorganismos asimilan mejor las concentraciones menores de fármacos, a tiempos de contacto mayores de 24 horas. Con todos los desinfectantes de estudio se observaron ligeras resistencias de la bacteria ante la presencia de los fármacos. Drugs in water have been considered in recent years a serious environmental problem, and has increased interest in the effects that may occur in the aquatic environment. Added to this problem is the excessive consumption of non-controlled drugs, which can be disposed of without proper treatment, so they enter waterways. These are compounds emerging contaminants being discharged is a health and environmental problem. It is water soluble contaminants and are therefore able to be present in all stages of the water cycle. There have been numerous studies conducted in different countries, since their presence has become an emerging issue in environmental chemistry, because in the research shows that there isn’t a removal despite the different processes used in wastewater treatment plants. This contamination, increases the need to know what is the toxicological effects on aquatic organisms and, consequently, in people. The bacterium Escherichia coli, is a well-studied organism because it is found in the intestines of animals and humans and is therefore in the wastewater. Given the critical situation, was proposed to study the effect on the bacterium E. coli of 4 drugs: Atenolol, Azithromycin, Estradiol and Ibuprofen, to know what his behavior and the effect it could produce the presence of drugs in the removal by oxidation processes. Also, the effects on E. Coli, after being in contact with the drug 1, 3 and 7 days. It was noted that the drugs have effects on the growth or elimination of microorganisms depending on exposure time and the drug concentration. Also it was observed that the microorganisms assimilate lower concentrations of drug better over 24 hours. With all disinfectants study were observed resistances of the bacteria in the presence of the drugs.

Evaluation of Spain's Water-Energy Nexus

This paper explores the water-energy nexus of Spain and offers calculations for both the energy used in the water sector and the water required to run the energy sector. The article takes a prospective approach, offering evaluations of policy objectives for biofuels and expected renewable energy sources. Approximately 5.8% of total electricity demand in Spain is due to the water sector. Irrigated agriculture is one of the Spanish water sectors that show the largest growth in energy requirements. Searches for more efficient modes of farm water use, urban waste water treatment, and the use of desalinated water must henceforth include the energy component. Furthermore, biofuel production, to the levels targeted for 2020, would have an unbearable impact on the already stressed water resources in Spain. However, growing usage of renewable energy sources is not threatened by water scarcity, but legislative measures in water allocation and water markets will be required to meet the requirements of using these sources. Some of these measures, which are pushed by regional governments, are discussed in concluding sections.

Limiting properties in the characterisation of mixed recycled aggregates for use in the manufacture of concrete

El objetivo principal de este trabajo de investigación es estudiar las propiedades del árido reciclado mixto para la fabricación de hormigón reciclado en aplicaciones no estructurales. Se ha realizado la caracterización completa de 35 muestras de áridos reciclados mixtos gruesos de distinta calidad, procedentes de 13 plantas de tratamiento diferentes de la geografía española. Se han estudiado las correlaciones que existen entre las diferentes propiedades, en particular, con la absorción de agua, el contenido de sulfatos y la composición. Se propone una clasificación de los áridos reciclados y se limita de forma indicativa el contenido de yeso para que una muestra de árido reciclado mixto cumpla con la limitación del 0,8% de los sulfatos solubles en ácido de la Instrucción EHE-08. Recycling of construction and demolition waste (CDW) has become a widespread concern in Spain for the last years, as a way to preserve natural resources and achieve a better control of waste disposal sites.Specific applications which make use of mixed recycled aggregates are of great importance, as this types of aggregates constitute the majority of the total production. Structural and non-structural concrete is one of the possible applications, being this the main goal of our study. This paper presents a study on the physical and chemical characteristics of mixed recycled aggregates which have been obtained from different CDW treatment plants of Spain. Correlations between the different properties were investigated in order to find criterions of acceptance for recycled aggregates to be used in concrete. The comparison between the properties offers the possibility of pre-selecting a great quantity of mixed recycled aggregates, these being suitable for either structural and non-structural concrete. The determination of water absorption and the gypsum content are good indicators in order to evaluate the quality of the mixed recycled aggregates for its application in the production of concrete.

Garantía de funcionamiento de estaciones de tratamiento terciario de aguas residuales para usos recreativos : controles necesarios

La legislación existente en nuestro país, el Real Decreto 1620/200, de 7 de diciembre, por el que se establece el régimen jurídico de la reutilización de las aguas depuradas, no ha sido modificada en estos últimos años a pesar de las opiniones de expertos y operadores en el sentido que merece una revisión y mejora. Por ello se ha realizado un análisis pormenorizado de toda la legislación existente a nivel país y de otros países con amplia experiencia en reutilización para proponer mejoras o cambios en base a la información recopilada, tanto en estudios específicos de investigación como de los datos obtenidos de operadores y/o explotadores de estaciones regeneradoras de aguas residuales en España. Del estudio surgen algunas propuestas claras que se ponen a consideración de las autoridades. Se ha comprobado que no existen estudios suficientes relacionados a tipos de controles en estaciones de tratamiento terciario de aguas residuales en cada uno de los pasos de la línea de proceso, que permitan conocer las garantías de funcionamiento de dichas etapas y del proceso en su conjunto. De éste modo se podrían analizar todas las etapas por separado y comprobar si el funcionamiento en las condiciones previstas de diseño es apropiado, o si es posible mejorar la eficiencia a partir de estos datos intermedios, en lugar de los controles normales efectuados en la entrada y la salida realizados por los explotadores de las plantas existentes en el país. Existen, sin embargo, investigaciones y datos de casi todas las tecnologías existentes en el mercado relacionadas con la regeneración, lo cual ha permitido identificar sus ventajas e inconvenientes. La aplicación de un proceso de APPCC (Análisis de Peligros y Puntos de Control Críticos) a una planta existente ha permitido comprobar que es una herramienta práctica que permite gestionar la seguridad de un proceso de producción industrial como es el caso de un sistema de reutilización, por lo que se considera conveniente recomendar su aplicación siempre que sea posible. The existing legislation in our country, Royal Decree 1620/2007, of 7th December, establishing the legal regime for the reuse of treated water has not been modified in recent years despite expert and operators opinions in the sense that it deserves review and improvement. Therefore it has been conducted a detailed analysis of all existing legislation at country level and of other countries with extensive experience in water reuse to propose improvements or changes based on the information gathered both in specific research studies and the data obtained from operators and/or operators of regenerative sewage stations in Spain. As a result of these studies, some clear proposals are made to be considered by the authorities. It has been found that there are not enough studies related to types of controls in tertiary wastewater treatment plants, in each step of the process line, that provide insight into the performance guarantees of the mention stages and of the whole process. In this manner all stages could be analyzed separately and check if the operation in the design conditions envisaged is appropriate, or whether it is possible to improve efficiency taking in account these intermediate data, instead to the normal checks at entry and exit carried out by operators in existing plants in the country. There are, however, research and data from almost all technologies existing in the market related to regeneration, which has allowed identified its advantages and disadvantages. The application of a process of HACCP (hazard analysis and critical control points) to an existing plant has shown that it is a practical tool for managing the security of a process of industrial production as is the case of a water reuse system, so it is considered appropriate to recommend application whenever possible.

La reutilización de efluentes depurados en España: retrospectiva, desarrollo del marco normativo, estudio de las tecnologías de regeneración frente a los biorreactores de membrana y sus costes en función del uso

La reutilización de efluentes depurados siempre ha sido una opción en lugares con déficit coyuntural o estructural de recursos hídricos, se haya o no procedido a la regulación y planificación de esta práctica. La necesidad se crea a partir de las demandas de una zona, normalmente riego agrícola, que ven un mejor desarrollo de su actividad por contar con este recurso. España es el país de la UE que más caudal reutiliza, y está dentro de los diez primeros a nivel mundial. La regulación de esta práctica por el RD 1620/2007, ayudó a incorporar la reutilización de efluentes depurados a la planificación hidrológica como parte de los programas de medidas, con objeto de mitigar presiones, como son las extracciones de agua superficial y subterránea, o mejoras medioambientales evitando un vertido. El objeto de este trabajo es conocer la situación de la reutilización de efluentes depurados en España, los diferentes escenarios y planteamientos de esta actividad, el desarrollo del marco normativo y su aplicabilidad, junto a los tratamientos que permiten alcanzar los límites de calidad establecidos en la normativa vigente, en función de los distintos usos. Además, se aporta un análisis de costes de las distintas unidades de tratamiento y tipologías de líneas de regeneración, tanto de las utilizadas después de un tratamiento secundario como de otras opciones de depuración, como son los biorreactores de membrana (MBRs). Para el desarrollo de estos objetivos, en primer lugar, se aborda el conocimiento de la situación de la reutilización en España a través de una base de datos diseñada para cubrir todos los aspectos de esta actividad: datos de la estación depuradora de aguas residuales (EDAR), de la estación regeneradora (ERA), caudales depurados, reutilizados, volúmenes utilizados y ubicación de los distintos usos, tipos de líneas de tratamiento, calidades del agua reutilizada, etc. Las principales fuentes de información son las Confederaciones Hidrográficas (CCHH) a través de las concesiones de uso del agua depurada, las entidades de saneamiento y depuración de las distintas comunidades autónomas (CCAA), ayuntamientos, Planes Hidrológicos de Cuenca (PHC) y visitas a las zonas más emblemáticas. Además, se revisan planes y programas con el fin de realizar una retrospectiva de cómo se ha ido consolidando y desarrollando esta práctica en las distintas zonas de la geografía española. Se han inventariado 322 sistemas de reutilización y 216 tratamientos de regeneración siendo el más extendido la filtración mediante filtro arena seguido de una desinfección mediante hipoclorito, aunque este tratamiento se ha ido sustituyendo por un físico-químico con decantación lamelar, filtro de arena y radiación ultravioleta, tratamiento de regeneración convencional (TRC), y otros tratamientos que pueden incluir membranas, tratamientos de regeneración avanzados (TRA), con dosificación de hipoclorito como desinfección residual, para adaptarse al actual marco normativo. El uso más extendido es el agrícola con el 70% del caudal total reutilizado, estimado en 408 hm3, aunque la capacidad de los tratamientos de regeneración esperada para 2015, tras el Plan Nacional de Reutilización de Aguas (PNRA), es tres veces superior. Respecto al desarrollo normativo, en las zonas donde la reutilización ha sido pionera, las administraciones competentes han ido desarrollando diferentes recomendaciones de calidad y manejo de este tipo de agua. El uso agrícola, y en zonas turísticas, el riego de campos de golf, fueron los dos primeros usos que tuvieron algún tipo de recomendación incluso reglamentación. Esta situación inicial, sin una normativa a nivel estatal ni recomendaciones europeas, creó cierta incertidumbre en el avance de la reutilización tanto a nivel de concesiones como de planificación. En la actualidad sigue sin existir una normativa internacional para la reutilización y regeneración de efluentes depurados. Las recomendaciones de referencia a nivel mundial, y en concreto para el uso agrícola, son las de la OMS (Organización Mundial de la Salud) publicadas 1989, con sus posteriores revisiones y ampliaciones (OMS, 2006). Esta norma combina tratamientos básicos de depuración y unas buenas prácticas basadas en diferentes niveles de protección para evitar problemas sanitarios. Otra normativa que ha sido referencia en el desarrollo del marco normativo en países donde se realiza esta práctica, son las recomendaciones dadas por la Agencia Medioambiente Estadunidense (USEPA, 2012) o las publicadas por el Estado de California (Título 22, 2001). Estas normas establecen unos indicadores y valores máximos dónde el tratamiento de regeneración es el responsable de la calidad final en función del uso. Durante 2015, la ISO trabajaba en un documento para el uso urbano donde se muestra tanto los posibles parámetros que habría que controlar como la manera de actuar para evitar posibles riesgos. Por otro lado, la Comisión Europea (CE) viene impulsando desde el 2014 la reutilización de aguas depuradas dentro del marco de la Estrategia Común de Implantación de la Directiva Marco del Agua, y fundamentalmente a través del grupo de trabajo de “Programas de medidas”. Para el desarrollo de esta iniciativa se está planteando sacar para 2016 una guía de recomendaciones que podría venir a completar el marco normativo de los distintos Estados Miembros (EM). El Real Decreto 1620/2007, donde se establece el marco jurídico de la reutilización de efluentes depurados, tiende más a la filosofía implantada por la USEPA, aunque la UE parece más partidaria de una gestión del riesgo, donde se establecen unos niveles de tolerancia y unos puntos de control en función de las condiciones socioeconómicas de los distintos Estados, sin entrar a concretar indicadores, valores máximos o tratamientos. Sin embargo, en la normativa estadounidense se indican una serie de tratamientos de regeneración, mientras que, en la española, se hacen recomendaciones a este respecto en una Guía sin validez legal. Por tanto, queda sin regular los procesos para alcanzar estos estándares de calidad, pudiendo ser éstos no apropiados para esta práctica. Es el caso de la desinfección donde el uso de hipoclorito puede generar subproductos indeseables. En la Guía de recomendaciones para la aplicación del RD, publicada por el Ministerio de Agricultura y Medioambiente (MAGRAMA) en 2010, se aclaran cuestiones frecuentes sobre la aplicación del RD, prescripciones técnicas básicas para los sistemas de reutilización, y buenas prácticas en función del uso. Aun así, el RD sigue teniendo deficiencias en su aplicación siendo necesaria una revisión de la misma, como en las frecuencias de muestreo incluso la omisión de algunos parámetros como huevos de nematodos que se ha demostrado ser inexistentes tras un tratamiento de regeneración convencional. En este sentido, existe una tendencia a nivel mundial a reutilizar las aguas con fines de abastecimiento, incluir indicadores de presencia de virus o protozoos, o incluir ciertas tecnologías como las membranas u oxidaciones avanzadas para afrontar temas como los contaminantes emergentes. Otro de los objetivos de este trabajo es el estudio de tipologías de tratamiento en función de los usos establecidos en el RD 1620/2007 y sus costes asociados, siendo base de lo establecido a este respecto en la Guía y PNRA anteriormente indicados. Las tipologías de tratamiento propuestas se dividen en líneas con capacidad de desalar y las que no cuentan con una unidad de desalación de aguas salobres de ósmosis inversa o electrodiálisis reversible. Se realiza esta división al tener actuaciones en zonas costeras donde el agua de mar entra en los colectores, adquiriendo el agua residual un contenido en sales que es limitante en algunos usos. Para desarrollar este objetivo se han estudiado las unidades de tratamiento más implantadas en ERAs españolas en cuanto a fiabilidad para conseguir determinada calidad y coste, tanto de implantación como de explotación. El TRC, tiene un coste de implantación de 28 a 48 €.m-3.d y de explotación de 0,06 a 0,09 €. m-3, mientras que, si se precisara desalar, este coste se multiplica por diez en la implantación y por cinco en la explotación. En caso de los usos que requieren de TRA, como los domiciliarios o algunos industriales, los costes serían de 185 a 398 €.m-3.d en implantación y de 0,14 a 0,20 €.m-3 en explotación. En la selección de tecnologías de regeneración, la capacidad del tratamiento en relación al coste es un indicador fundamental. Este trabajo aporta curvas de tendencia coste-capacidad que sirven de herramienta de selección frente a otros tratamientos de regeneración de reciente implantación como son los MBR, u otros como la desalación de agua de mar o los trasvases entre cuencas dentro de la planificación hidrológica. En España, el aumento de las necesidades de agua de alta calidad en zonas con recursos escasos, aumento de zonas sensibles como puntos de captación para potables, zonas de baño o zonas de producción piscícola, y en ocasiones, el escaso terreno disponible para la implantación de nuevas plantas depuradoras (EDARs), han convertido a los MBRs, en una opción dentro del marco de la reutilización de aguas depuradas. En este trabajo, se estudia esta tecnología frente a los TRC y TRA, aportando igualmente curvas de tendencia coste-capacidad, e identificando cuando esta opción tecnológica puede ser más competitiva frente a los otros tratamientos de regeneración. Un MBR es un tratamiento de depuración de fangos activos donde el decantador secundario es sustituido por un sistema de membranas de UF o MF. La calidad del efluente, por tanto, es la misma que el de una EDAR seguida de un TRA. Los MBRs aseguran una calidad del efluente para todos los usos establecidos en el RD, incluso dan un efluente que permite ser directamente tratado por las unidades de desalación de OI o EDR. La implantación de esta tecnología en España ha tenido un crecimiento exponencial, pasando de 13 instalaciones de menos de 5.000 m3. d-1 en el 2006, a más de 55 instalaciones en operación o construcción a finales del 2014, seis de ellas con capacidades por encima de los 15.000 m3. d-1. Los sistemas de filtración en los MBR son los que marcan la operación y diseño de este tipo de instalaciones. El sistema más implantado en España es de membrana de fibra hueca (MFH), sobre todo para instalaciones de gran capacidad, destacando Zenon que cuenta con el 57% de la capacidad total instalada. La segunda casa comercial con mayor número de plantas es Kubota, con membranas de configuración placa plana (MPP), que cuenta con el 30 % de la capacidad total instalada. Existen otras casas comerciales implantadas en MBR españoles como son Toray, Huber, Koch o Microdym. En este documento se realiza la descripción de los sistemas de filtración de todas estas casas comerciales, aportando información de sus características, parámetros de diseño y operación más relevantes. El estudio de 14 MBRs ha posibilitado realizar otro de los objetivos de este trabajo, la estimación de los costes de explotación e implantación de este tipo de sistemas frente a otras alternativas de tratamiento de regeneración. En este estudio han participado activamente ACA y ESAMUR, entidades públicas de saneamiento y depuración de Cataluña y Murcia respectivamente, que cuentan con una amplia experiencia en la explotación de este tipo de sistemas. Este documento expone los problemas de operación encontrados y sus posibles soluciones, tanto en la explotación como en los futuros diseños de este tipo de plantas. El trabajo concluye que los MBRs son una opción más para la reutilización de efluentes depurados, siendo ventajosos en costes, tanto de implantación como de explotación, respecto a EDARs seguidas de TRA en capacidades por encima de los 10.000 m3.d-1. ABSTRACT The reuse of treated effluent has always been an option in places where a situational or structural water deficit exists, whether regulatory and/or planning efforts are completed or not. The need arises from the demand of a sector, commonly agricultural irrigation, which benefits of this new resource. Within the EU, Spain is ahead in the annual volume of reclaimed water, and is among the top ten countries at a global scale. The regulation of this practice through the Royal Decree 1620/2007 has helped to incorporate the water reuse to the hydrological plans as a part of the programme of measures to mitigate pressures such as surface or ground water extraction, or environmental improvements preventing discharges. The object of this study is to gain an overview of the state of the water reuse in Spain, the different scenarios and approaches to this activity, the development of the legal framework and its enforceability, together with the treatments that achieve the quality levels according to the current law, broken down by applications. Additionally, a cost analysis of technologies and regeneration treatment lines for water reclamation is performed, whereas the regeneration treatment is located after a wastewater treatment or other options such as membrane bioreactors (MBR). To develop the abovementioned objectives, the state of water reuse in Spain is studied by means of a database designed to encompass all aspects of the activity: data from the wastewater treatment plants (WWTP), from the water reclamation plants (WRP), the use of reclaimed water, treated water and reclaimed water annual volumes and qualities, facilities and applications, geographic references, technologies, regeneration treatment lines, etc. The main data providers are the River Basin authorities, through the concession or authorization for water reuse, (sanitary and wastewater treatment managers from the territorial governments, local governments, Hydrological Plans of the River Basins and field visits to the main water reuse systems. Additionally, a review of different plans and programmes on wastewater treatment or water reuse is done, aiming to put the development and consolidation process of this activity in the different regions of Spain in perspective. An inventory of 322 reuse systems and 216 regeneration treatments has been gathered on the database, where the most extended regeneration treatment line was sand filtration followed by hypochlorite disinfection, even though recently it is being replaced by physical–chemical treatment with a lamella settling system, depth sand filtration, and a disinfection with ultraviolet radiation and hypochlorite as residual disinfectant, named conventional regeneration treatment (CRT), and another treatment that may include a membrane process, named advanced regeneration treatment (ART), to adapt to legal requirements. Agricultural use is the most extended, accumulating 70% of the reclaimed demand, estimated at 408 hm3, even though the expected total capacity of WRPs for 2015, after the implementation of the National Water Reuse Plan (NWRP) is three times higher. According to the development of the water reuse legal framework, there were pioneer areas where competent authorities developed different quality and use recommendations for this new resource. Agricultural use and golf course irrigation in touristic areas were the first two uses with recommendations and even legislation. The initial lack of common legislation for water reuse at a national or European level created some doubts which affected the implementation of water reuse, both from a planning and a licensing point of view. Currently there is still a lack of common international legislation regarding water reuse, technologies and applications. Regarding agricultural use, the model recommendations at a global scale are those set by the World Health Organization published in 1989, and subsequent reviews and extensions about risk prevention (WHO, 2006). These documents combine wastewater treatments with basic regeneration treatments reinforced by good practices based on different levels of protection to avoid deleterious health effects. Another relevant legal reference for this practices has been the Environmental Protection Agency of the US (USEPA, 2012), or those published by the State of California (Title 22, 2001). These establish indicator targets and maximum thresholds where regeneration treatment lines are responsible for the final quality according to the different uses. During 2015, the ISO has worked on a document aimed at urban use, where the possible parameters to be monitored together with risk prevention have been studied. On the other hand, the European Commission has been promoting the reuse of treated effluents within the Common Implementation Strategy of the Water Framework Directive, mainly through the work of the Programme of Measures Working Group. Within this context, the publication of a recommendation guide during 2016 is intended, as a useful tool to fill in the legal gaps of different Member States on the matter. The Royal Decree 1620/2007, where the water reuse regulation is set, resembles the principles of the USEPA more closely, even though the EU shows a tendency to prioritize risk assessment by establishing tolerance levels and thresholds according to socioeconomic conditions of the different countries, without going into details of indicators, maximum thresholds or treatments. In contrast, in the US law, regeneration treatments are indicated, while in the Spanish legislation, the only recommendations to this respect are compiled in a non-compulsory guide. Therefore, there is no regulation on the different treatment lines used to achieve the required quality standards, giving room for inappropriate practices in this respect. This is the case of disinfection, where the use of hypochlorite may produce harmful byproducts. In the recommendation Guide for the application of the Royal Decree (RD), published by the Ministry of Agriculture and Environment (MAGRAMA) in 2010, clarifications of typical issues that may arise from the application of the RD are given, as well as basic technical parameters to consider in reuse setups, or good practices according to final use. Even so, the RD still presents difficulties in its application and requires a review on issues such as the sampling frequency of current quality parameters or even the omission of nematode eggs indicator, which have been shown to be absent after CRT. In this regard, there is a global tendency to employ water reuse for drinking water, including indicators for the presence of viruses and protozoans, or to include certain technologies such as membranes or advanced oxidation processes to tackle problems like emerging pollutants. Another of the objectives of this study is to provide different regeneration treatment lines to meet the quality requirements established in the RD 1620/2007 broken down by applications, and to estimate establishment and operational costs. This proposal has been based on what is established in the above mentioned Guide and NWRP. The proposed treatment typologies are divided in treatment trains with desalination, like reverse osmosis or reversible electrodialisis, and those that lack this treatment for brackish water. This separation is done due to coastal facilities, where sea water may permeate the collecting pipes, rising salt contents in the wastewater, hence limiting certain uses. To develop this objective a study of the most common treatment units set up in Spanish WRPs is conducted in terms of treatment train reliability to obtain an acceptable relationship between the required quality and the capital and operational costs. The CRT has an establishment cost of 28 to 48 €.m-3.d and an operation cost of 0.06 to 0.09 €.m-3, while, if desalination was required, these costs would increase tenfold for implementation and fivefold for operation. In the cases of uses that require ART, such as residential or certain industrial uses, the costs would be of 185 to 398 €.m-3.d for implementation and of 0.14 to 0.20 €.m-3 for operation. When selecting regeneration treatment lines, the relation between treatment capacity and cost is a paramount indicator. This project provides cost-capacity models for regeneration treatment trains. These may serve as a tool when selecting between different options to fulfill water demands with MBR facilities, or others such as sea water desalination plants or inter-basin water transfer into a water planning framework. In Spain, the requirement for high quality water in areas with low resource availability, the increasing number of sensitive zones, such as drinking water extraction, recreational bathing areas, fish protected areas and the lack of available land to set up new WWTPs, have turned MBRs into a suitable option for water reuse. In this work this technology is analyzed in contrast to CRT and ART, providing cost-capacity models, and identifying when and where this treatment option may outcompete other regeneration treatments. An MBR is an activated sludge treatment where the secondary settling is substituted by a membrane system of UF or MF. The quality of the effluent is, therefore, comparable to that of a WWTP followed by an ART. MBRs ensure a sufficient quality level for the requirements of the different uses established in the RD, even producing an effluent that can be directly treated in OI or EDR processes. The implementation of this technology in Spain has grown exponentially, growing from 13 facilities with less than 5000 m3.d-1 in 2006 to above 55 facilities operating by the end of 2014, 6 of them with capacities over 15000 m3.d-1. The membrane filtration systems for MBR are the ones that set the pace of operation and design of this type of facilities. The most widespread system in Spain is the hollow fiber membrane configuration, especially on high flow capacities, being Zenon commercial technology, which mounts up to 57% of the total installed capacity, the main contributor. The next commercial technology according to plant number is Kubota, which uses flat sheet membrane configuration, which mounts up to 30% of the total installed capacity. Other commercial technologies exist within the Spanish MBR context, such as Toray, Huber, Koch or Microdym. In this document an analysis of all of these membrane filtration systems is done, providing information about their characteristics and relevant design and operation parameters. The study of 14 full scale running MBRs has enabled to pursue another of the objectives of this work: the estimation of the implementation and operation costs of this type of systems in contrast to other regeneration alternatives. Active participation of ACA and ESAMUR, public wastewater treatment and reuse entities of Cataluña and Murcia respectively, has helped attaining this objective. A number of typical operative problems and their possible solutions are discussed, both for operation and plant design purposes. The conclusion of this study is that MBRs are another option to consider for water reuse, being advantageous in terms of both implementation and operational costs, when compared with WWTPs followed by ART, when considering flow capacities above 10000 m3.d-1.

Respuestas anatómico fisiológicas frente a estrés hídrico en plantaciones de especies de crecimiento rápido para la producción de biomasa

El objetivo general de la presente Tesis es identificar algunas de las características anatómico-fisiológicas que confieren la capacidad de alcanzar una mejor productividad bajo clima mediterráneo a plantas de diversos genotipos de los géneros Populus y Eucalyptus, caracterizados por su carácter pionero, elevado crecimiento y vulnerabilidad a la cavitación. En los dos primeros capítulos se hace un seguimiento de la conductancia estomática a una selección de clones de eucalipto cultivados en invernadero, sometidos a diferentes dotaciones hídricas. Se realizaron además mediciones periódicas del pH de la savia del tallo y de la pérdida de conductividad hidráulica para investigar su implicación en la regulación química e hidraúlica del cierre estomático. Las variaciones en el pH de la savia obtenidas parecen responder a cambios en el déficit de presión de vapor de agua atmosférico y no a diferencias en la disponibilidad de agua en el suelo. La conductancia estomática presentó una correlación positiva significativa con el pH de la savia, pero no con la conductividad hidráulica. La variabilidad de la conductividad hidráulica máxima se discute a la luz de recientes investigaciones sobre los materiales constituyentes de las membranas de las punteaduras. Los clones que mostraron mayores conductancias hidráulicas y estomáticas presentaron valores más altos de producción y supervivencia, poniendo de manifiesto la utilidad del estudio de estas variables. Por el contrario, los valores más bajos de conductancia estomática e hidraúlica se encontraron en clones que han resultado un fracaso en plantaciones comerciales, en particular, fue destacable el mal resultado de un clon procedente de autocruzamiento respecto de otros híbridos. En el tercer capítulo de la tesis se estudian características anatómicas y funcionales del xilema relacionadas con la eficiencia en el transporte de agua a las hojas, y que pueden afectar directa o indirectamente a la transpiración y al crecimiento. Los estudios anatómicos fueron realizados sobre brotes anuales de chopo en una plantación situada en Granada, en condiciones de riego limitante. La combinación de rasgos anatómicos más favorable de cara a la producción de biomasa fue una densidad alta de vasos de diámetro intermedio. Los clones más productivos figuraron entre los más resistentes a la cavitación. Para estudiar el crecimiento de masas arboladas se utilizan frecuentemente parámetros fisiológicos como el índice de area foliar (LAI). La estimación del LAI a partir de fotografías hemisféricas aplicada a tallares de chopo plantados a alta densidad y a turno corto para biomasa se lleva a cabo mediante una metodología reciente empleada y discutida en el cuarto capítulo de la Tesis. Los resultados muestran que las diferencias de producción existentes entre genotipos, localidades de medición con diferentes dosis de riego, y años, pueden predecirse a partir de la determinación del índice de área foliar tanto por métodos directos como indirectos de estimación. Tanto los estudios realizados en eucalipto como en chopo han mostrado que los genotipos con menores producciones de biomasa en campo alcanzaron los menores valores de conductancia estomática en las condiciones más favorables así como el menor número de vasos en el xilema. La estrecha relación entre crecimiento y LAI confirma una vez más la importancia del desarrollo de la copa para sostener un buen crecimiento. El mayor desarrollo de la copa y rendimiento en biomasa se midieron en uno de los clones con un número de vasos más elevado, y menor vulnerabilidad a la cavitación en condiciones de estrés. Estos resultados ponen de manifiesto la importancia de las características anatómicas y funcionales del xilema como condicionantes del patrón de crecimiento de las plantas y el comportamiento de los estomas. ABSTRACT A number of anatomical xylem traits and physiological variables were analyzed in genotypes of both the Populus and Eucalyptus genera with the main aim of identifying traits in the genotypes which confer the ability to produce an acceptable biomass yield under Mediterranean climatic conditions. In the first two chapters of this PhD, the results of two experiments carried out on several clones of the species Eucalyptus globulus Labill. are presented. Chapters three and four include the results of another two trials on four poplar hybrid genotypes. One of the initial plant responses to water stress is stomatal closure, which can be triggered by hydraulic and/or chemical signals. The two first chapters of this PhD deal with trials in which stomatal conductance and percentage loss of hydraulic conductivity were monitored on a set of eucalyptus clones supplied by ENCE (former National Cellulose Company) and currently used in the company’s own commercial plantings. The experimental trials were carried out in greenhouses and the plants were submitted to two different watering regimes. The pH of the stem sap was periodically measured as the greenhouse temperature and humidity changed. The aim of these measurements was to investigate the role of both sap pH and percentage loss of hydraulic conductivity on stomatal regulation. The results obtained suggest that changes in sap pH are a response to vapor pressure deficit changes rather than to differences in soil water availability. We found significant correlation between stomatal conductance and sap pH, although no significant relationship was found between stomatal conductance and hydraulic conductivity. Variability in maximum hydraulic conductivity is discussed based on recent pit membrane constituent research. The study of hydraulic conductivity proved helpful in order to detect the clones with both higher growth and greater chance of survival, since clones displaying the lowest hydraulic conductivities were those that failed in commercial plantings. Anatomical xylem traits define the water transport efficiency to leaves and can therefore limit transpiration and growth. The third chapter of this PhD addresses anatomical xylem traits in poplar. One year old stem samples were taken from a water-stressed trial in Granada. The anatomical xylem study proved useful for detecting the lowest yielding genotypes. Clones with intermediate vessel size and high vessel densities were found to be those with the highest biomass yield. Differences in cavitation resistance depending on the clone tested and the water treatment applied were also found. The clones with the highest biomass yield were found to be among the most cavitation resistant clones in each watering regime. Xylem and physiological traits along with stomatal behavior are useful tools to determine plant growth. In order to study plantings or forests, it is more common to employ other physiological variables such as leaf area index (LAI). LAI estimation from hemispherical photographs applied to short rotation woody crops is a recently developed method that still requires fine tuning through further investigation. In the fourth chapter, data from LAI monitoring over two consecutive years were analyzed in two different locations where different irrigation treatments were applied. The results showed that differences in yield between genotypes, different irrigation regimes and years could be predicted by using the LAI estimates, either through direct or indirect estimation methods. Our studies of poplar and eucalyptus have shown that the field-grown genotypes with the lowest biomass yield displayed the lowest values of stomatal conductance under the most favorable environmental conditions and also had a low number of xylem conduits. The close relationship between LAI and growth highlights the importance of crown development in biomass growth. The highest LAI and biomass yield were recorded in one of the clones with higher vessel density and the lowest vulnerability to cavitation under stress conditions. These results underline the importance of research into anatomical and functional traits as factors influencing plant growth patterns and stomatal behavior.

Spatio-temporal distribution of pyrethroids in soil in Mediterranean paddy fields

Purpose The demand of rice by the increase in population in many countries has intensified the application of pesticides and the use of poor quality water to irrigate fields. The terrestrial environment is one compartment affected by these situations, where soil is working as a reservoir, retaining organic pollutants. Therefore, it is necessary to develop methods to determine insecticides in soil and monitor susceptible areas to be contaminated, applying adequate techniques to remediate them. Materials and methods This study investigates the occurrence of ten pyrethroid insecticides (PYs) and its spatio-temporal variance in soil at two different depths collected in two periods (before plow and during rice production), in a paddy field area located in the Mediterranean coast. Pyrethroids were quantified using gas chromatography?mass spectrometry (GC?MS) after ultrasound-assisted extraction with ethyl acetate. The results obtained were assessed statistically using non-parametric methods, and significant statistical differences (p < 0.05) in pyrethroids content with soil depth and proximity to wastewater treatment plants were evaluated. Moreover, a geographic information system (GIS) was used to monitor the occurrence of PYs in paddy fields and detect risk areas. Results and discussion Pyrethroids were detected at concentrations ?57.0 ng g?1 before plow and ?62.3 ng g?1 during rice production, being resmethrin and cyfluthrin the compounds found at higher concentrations in soil. Pyrethroids were detected mainly at the top soil, and a GIS program was used to depict the obtained results, showing that effluents from wastewater treatment plants (WWTPs) were the main sources of soil contamination. No toxic effects were expected to soil organisms, but it is of concern that PYs may affect aquatic organisms, which represents the worst case scenario. Conclusions A methodology to determine pyrethroids in soil was developed to monitor a paddy field area. The use of water fromWWTPs to irrigate rice fields is one of the main pollution sources of pyrethroids. It is a matter of concern that PYs may present toxic effects on aquatic organisms, as they can be desorbed from soil. Phytoremediation may play an important role in this area, reducing the possible risk associated to PYs levels in soil.

Avaliação da quantidade e qualidade dos recursos hídricos superficiais da bacia hidrográfica do rio Sapucaí-Mirim (SP) através do simulador computacional Mike Basin

Fundamental a vida e ao desenvolvimento de qualquer sociedade, a água é um bem precioso e limitado que está se esgotando e sendo motivo de preocupação mundial. O desperdício, a distribuição desigual, o aumento do consumo e a degradação da qualidade da água são motivos que a tornaram escassa e trouxeram à tona a importância do planejamento e gerenciamento dos recursos hídricos. Frente a esta situação, este trabalho buscou avaliar a disponibilidade hídrica quantitativa e qualitativa da bacia hidrográfica do rio Sapucaí-Mirim, SP. Através da aplicação do simulador hidrológico MIKE BASIN, foi analisado o desempenho do sistema de recursos hídricos, o conflito existente entre os usos múltiplos e a concentração dos parâmetros OD e DBO nas águas do rio que recebe efluentes domésticos, muitos deles sem nenhum tratamento. Apesar da quantidade de água ser suficiente para atender às demandas, o estudo mostra que a geração de energia elétrica está comprometida e a água está se esgotando qualitativamente, evidenciando a necessidade e urgência de se implantar estações de tratamento de esgoto.

Management of Trihalomethanes in Finished Drinking Water Through Source Water Precursor Monitoring

Trihalomethanes are organic compounds formed in drinking water distribution systems as a result of disinfection. This capstone project researched and evaluated the statistical correlation of trihalomethanes in finished drinking water and total organic carbon in source water using data generated by Denver area utilities. Results of the study conclude that some drinking water supply systems show a slight correlation between source water total organic carbon levels and trihalomethane levels in finished water. Results of the study also verify the assertion that changes to treatment for the reduction of trihalomethanes, for the protection of human health under the Safe Drinking Water Act should be determined by each utility, using information from gathered data, seasonal trends, and small scale batch testing.

Chemical characterization of emissions from a municipal solid waste treatment plant

Gaseous emissions are an important problem in municipal solid waste (MSW) treatment plants. The sources points of emissions considered in the present work are: fresh compost, mature compost, landfill leaks and leachate ponds. Hydrogen sulphide, ammonia and volatile organic compounds (VOCs) were analysed in the emissions from these sources. Hydrogen sulphide and ammonia were important contributors to the total emission volume. Landfill leaks are significant source points of emissions of H2S; the average concentration of H2S in biogas from the landfill leaks is around 1700 ppmv. The fresh composting site was also an important contributor of H2S to the total emission volume; its concentration varied between 3.2 and 1.7 ppmv and a decrease with time was observed. The mature composting site showed a reduction of H2S concentration (<0.1 ppmv). Leachate pond showed a low concentration of H2S (in order of ppbv). Regarding NH3, composting sites and landfill leaks are notable source points of emissions (composting sites varied around 30–600 ppmv; biogas from landfill leaks varied from 160 to 640 ppmv). Regarding VOCs, the main compounds were: limonene, p-cymene, pinene, cyclohexane, reaching concentrations around 0.2–4.3 ppmv. H2S/NH3, limonene/p-cymene, limonene/cyclohexane ratios can be useful for analysing and identifying the emission sources.