990 resultados para Volume total de carga levantada


Relevância:

30.00% 30.00%

Publicador:

Resumo:

A produção farmacêutica de preparações estéreis, em especial de Nutrição Parenteral Total (NTP), atinge atualmente graus de importância devido ao grande volume de produção em escala de bancada. Tais características produtivas induzem os operadores a assumirem posturas desfavoráveis do ponto de vista músculo-esquelético, associadas a uma repetitividade importante. Desta forma, este estudo aborda, através de um estudo de caso, a melhoria das condições de trabalho e o resprojeto de uma linha de produção de NPT. Para tal, foi empregada uma metodologia abrangente do ponto de vista de análise postural para melhorar o processo produtivo. esta permitiu a comparação de indicadores anteriores e posteriores à transformação do processo, assegurando a visualização das boas práticas realizadas durante o estudo de melhorias. Como resultados principais, houve uma sensível diminuição das queixas de desconforto e dor de origem postural. Porém, no que concerne à repetitividade são necessários ainda ajustes relacionados com um melhor dimensionamento do processo.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A necessidade de uma maior longevidade da artroplastia total do quadril em pessoas mais jovens e ativas tem impulsionado a evolução do projeto de hastes cimentadas polidas e sem colar, através de alterações da forma desde a original de Charnley, passando pela dupla cunha e mais recentemente, a tripla cunha. Essa pesquisa foi direcionada à análise comparativa da estabilidade de hastes cujos ângulos de cunha foram a variável de projeto. Modelos físicos simplificados de diferentes conicidades foram elaborados e submetidos a testes e simulações numéricas para verificar, respectivamente, a migração distal e o ambiente mecânico da interface entre a haste e o cimento. Em modelos anatômicos constituídos das formas de hastes comerciais, implantadas em fêmures compósitos, foram acompanhadas as movimentações axial e rotacional e foi determinado o padrão de transmissão de carga através do nível de deformações no interior do manto de cimento e na superfície do osso. A hipótese é que uma prótese que apresente maiores deslocamentos e maiores níveis de deformações impostas ao manto de cimento em testes estáticos e cíclicos devem ser as de maior probabilidade de revisão precoce. Por outro lado, a relação entre o nível de deformação da superfície cortical antes e depois da implantação das hastes indica o potencial para o remodelamento ósseo As hastes foram extraídas e reimplantadas nos modelos anatômicos após os testes de fadiga para verificar alterações nos padrões de deformação. Também foi avaliada a contribuição da polimerização do cimento na estabilidade através do acompanhamento das deformações e de simulações numéricas. O processo de polimerização do cimento contribui para o acoplamento, pois promove um grande nível de deformações residuais devido à retração. Por outro lado pode provocar trincas iniciais e espaços na interface entre o cimento e o osso, além de facilitar a propagação de trincas por fadiga. Nas simulações numéricas dos modelos físicos observamos que a condição inicial de adesão na interface é representativa entre a haste e o manto. Os modelos físicos indicaram maior migração com menor conicidade. Para os modelos anatômicos houve diferença significativa apenas quanto à rotação permanente entre os grupos, estando isto associado à rigidez proximal e ao raio de transição do calcar. As hastes tripla cunha conferem uma menor redução do nível de carregamento no grande trocânter, o que pode prevenir a reabsorção óssea adaptativa. As hastes dupla cunha provocam menor redução do nível de carregamento na região do calcar. Entretanto, outros fatores devem ser considerados, tais como o raio de transição do calcar e a rigidez proximal das hastes. Nos modelos anatômicos, mesmo após a extração e reimplantação das hastes, manteve-se o padrão de deformações tanto no manto quanto na superfície dos fêmures compósitos.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Nas últimas décadas o setor de logística passou por grandes transformações pelo mundo. Assim, a eficiência do sistema logístico é importante para o crescimento econômico, a diversificação, redução dos custos operacionais e da pobreza. Segundo o Banco Mundial, o Brasil tornou-se uma das maiores economias do mundo, mas os custos logísticos elevados colocam em risco esse crescimento. Estes custos são em grande parte o resultado de diferenças em infraestrutura de cada região, juntamente com os encargos do setor rodoviário, que corresponde por 60% do total do transporte de carga do país. Entretanto, a logística brasileira está às portas de uma nova revolução, em práticas de negócios e eficiência, e também na qualidade e disponibilidade da infraestrutura de transportes e comunicações, e novos projetos e práticas para superar a situação. O objetivo deste estudo não é analisar o presente e as atuais tendências de logística do Brasil e do setor de transporte, mas sim modelar possíveis cenários futuros para os próximos anos. Em outras palavras, este trabalho mostra diferentes possibilidades de como o setor de logística e transporte poderá ser no futuro. Para isso, este trabalho irá utilizar a metodologia de cenários prospectivos e entrevistas com especialistas relacionados da área.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The dams are limnic ecosystems of great importance for its multiple uses, among them, water supply for the public and to culture of artisanal fish are most relevant. The aim of the present study is to evaluate the physical-chemical characteristics and the phytoplankton community in two chosen sites (Point 1 littoral zone of point source; Point 2 pelagic zone of non-point source) of the Minister João Alves dam, which is also known as Boqueirão de Parelhas/RN. This represents the spatial distribution of the phytoplankton species in order to understand any possible alterations of the water quality and the phytoplankton composition in relation to the water quality originating from the impact of the tilapia, Oreochromis niloticus, culture. The study period also encompasses temporal variations exhibited in two seasons of an annual cycle, one during the dry season (Oct, Nov and Dec of 2008 and Jan of 2009), and the other rainy season (Mar, Apr, May and June of 2008) to extend the observation. The physicalchemical parameters, such as pH, temperature, electrical conductivity, concentration of dissolved oxygen were measured in situ and the values of the inorganic nutrients (nitrate, ammonium and orto-phosfato) and chlorophyll in the laboratory. The quali-quantitative analyses of the phytoplankton had been carried through sedimentation technique and the enumeration of the random of 400 cells, colonies and filaments counted using Sedgwick-Rafter counting chamber. The results of pH varied widely from the acidic to alkaline range with the minimum of 5.8 (± 0.8) and the maximum of 9.2 (± 0.7-0.8), at point 1 and 2. The dissolved oxygen content was higher in the rainy period than that in the dry period. The maximum electrical conductivity was of 1409 μScm-1 in point 1 and 431 minim of μScm-1, in point 2. There was a considerable alteration in the levels of inorganic nutrients such as nitrate-nitrogen, ammoniacal nitrogen and orthophosphate during the two cycles of study period. Phytoplankton assemblages presented a picture of alternate dominance among species Cyanobacteria, Bacillariophyceae and Chlorophyceae. The trophic state index diagnosed to the category of mesotrophic, which is based on the values of chlorophyll, total phosphorus and Secchi-disc measurements. The wind driven turbulence of the water column and the fresh inflow of water (flushing and dilution) during rainy season acted as constraint and did-not allow an exaggerated growth of the species of cyanobacteria. On the basis of the present we conclude that the culture of tilapias in cage-culture fails to produce pollution load that could compromise the quality of the water of the dam, probably be due to small dimension of the culture in relation to the size, volume of the water and the reservoir capacity support its own environment

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Diabetes mellitus has been associated with bone metabolism alterations, such as osteopenia and osteporosis. So, the search of new anabolic agents promote bone mass gain can be important to prevent osteoporosis. The aim of this study was evaluate zinc anabolic effect over bone in diabetic and post-menopausal osteopenic models. Diabetes was induced by STZ (45mg/Kg of body weight) administration and post-menopausal by bilateral ovariectomy. Adults female Wistar rats (n=65) were divided in 5 groups: control group (n=15), ovariectomized without (n=15) and with zinc supplementation (n=10) groups, diabetic and ovarioctomized without (n=15) and with zinc supplementation (n=10) groups. Studied periods had been untill 90 days. Diabetic condition was confirmed hiperglicemic state and alterations of state with polyuria, polyphagia, polydipsia and glucosuria. Histomorphometric analysis showed that zinc supplementation increased trabecular thickness and reduced trabecular distance significantly in diabetic groups with similar values to those showed in control group. Correlation analysis of histomorphometric parameters with serum glucose concentration showed that more time in hyperglycemia more bone damage, as well as, zinc supplementation contributed to prevent this damage. Elevated serum glucose caused hyperzincuria, phosphaturia and calciuria. Zinc supplementation promoted increased levels of calcium and phosphorous ions in 90th days diabetic group. No alteration was observed by ovariectomy in mineral (Ca, P and Zn) serum and urine concentrations. Total serum Alkaline Phosphatase activity increased in diabetic groups, supplemented or not, compared with control group. However, Tartarate-Resistant Acid Phosphatase, magnesium and serum zinc did not altered in studied groups. Serum albumin was reduced only in diabetic groups. Serum creatinine was unaltered. These results support the hypotesis that zinc can be used to prevent and treat diabetic and post-menopausal osteopenia

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In recent decades, the search for quality care has been widely discussed by the institutions and health professionals. In this context, it is the nurse coordinator of the process of providing nursing staff, reflecting the commitment to quality of care. In this process, it is the appearance of Infections Related to health care and its potential association with the workload in nursing as a valuable indicator of quality of care. Thus, this research contributes to studies to characterize the demand of nursing work to promote a safe healthcare practice. This study aimed to identify the association of nursing workload with the number of cases of Ventilator-Associated Pneumonia, urinary tract infection and central venous catheter infection in the intensive care unit. This is a quantitative research approach, descriptive, cross-sectional and prospective, held at Unimed Hospital in Natal-RN. The study population consisted of all patients treated in the Intensive Care Unit, Hospital for a period of 90 consecutive days in 2011. The convenience sample was compostapelos patients admitted to the ICU during the period of data collection, a total sample of 286 patients. To perform the data analysis software were used: Statistica 6.0, SPPS (Statistical Package for Social Sciences) version 17.0 (2004) and Excel 2007. In the descriptive analysis, we used Measures of Central Tendency and Measures of Dispersion or Variability and the use of nonparametric tests. Of the 286 patients, 88 were from the ICU and 198 ICU II II. Males predominated in the ICU I (51.1%) and female ICU II (57.6%) patients in the ICU I were aged 61-80 years (39.8%) followed by greater than 80 years (39.8%). In the ICU II, most of the patients were aged 61-80 years (38.9%) and then from 41 to 60 years (24.2%). In relation to the class of TISS inlet predominant class II in the two ICUs (59.1%), followed by Class III also in the two units (34.6%). Most patients (70.6%) out of the ICUs belonging to class II TISS. In the ICU I, the average number of forms of the TISS 28 was 6, has in ICU II this value drops to 3.2 forms. The overall mean was 19.9 TISS points in ICU patients I and ICU II.the 17 points in the average hours required to provide adequate nursing care to patients in the ICU I found that is 10 , 7 hours, and the ICU II 9.2 hours. It was found that the time provided by the nursing staff were higher in ICU II, with an average of 19 hours available for nurses in this sector. In the ICU I, which showed higher need of available hours, it was found that the mean value of 12.7 available hours. It was found that only 2.4% of patients had these units Ventilator-Associated Pneumonia, 1.0% were infected central venous catheter and 1.4% of patients had urinary tract infection. Infection associated with health care occurs, on average, on the tenth day of hospitalization. In the ICU II, this average value extends to the twelfth day with an excess of 2.7 hours of nursing care while in ICU I value decays to the ninth day of hospitalization with a deficiency of 12-hour assistance. It is concluded that patients generally showed a need for classification of semi-intensive care and has been assisted in their need to load. As for his association with the Related Infections Health will assist this analysis could not be performed due to the small number of notifications in this period. It is suggested further study how other factors related to infections me a longer period of analysis

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Quassia amara é arbusto de 3 a 6 metros de altura, tendo sido retirado indiscriminadamente das florestas para extrair do caule as quassinas usadas na indústria farmacêutica e como inseticida em agricultura orgânica. Não se tem muita informação técnica acerca do crescimento desta espécie para subsidiar estratégias de manejo sustentado. Este trabalho tem como objetivo avaliar o crescimento de Q. amara L. em cultivo agroecológico na Costa Rica. O trabalho consistiu em realizar avaliações do desenvolvimento de indivíduos de Q. amara em parcelas permanentes de medições, instaladas em meio às plantações desta espécie em consórcio com essências arbóreas. Foram efetuadas medições de diâmetro do caule a 10 cm do solo e altura total. Foi observado que em função das taxas de crescimento vegetal e incrementos médio e corrente anuais (IMA e ICA), mesmo após cinco anos de plantio, a madeira de Quassia amara para extração de quassinas não está pronta para colheita.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In order to quantify the population of Acromyrmex balzani Emery, 1890 nests and to verify whether the population dynamic of the colony is correlated with the symbiont fungus volume, the principal energy source of the colony, five nests located in grassland areas were evaluated. The nests were sprayed with neutral talcum powder to improve visualization and digging. The symbiont fungus and the entire population existent in the chambers were collected. The mean fungus volume and total nest population in excavated nests were, respectively, 74.76 ml and 1,095 individuals. Simple linear correlation analysis verified that the fungus volume grew proportionally to the number of individuals. Despite the correlation between fungus volume and population dynamic of colonies, the factors that determine this relationship are little known since other microorganisms live in association with the colony.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In this study were conducted experimental procedures for determination of variation of the expandability of rigid polyurethane foam (PUR) from a natural oil polyol (NOP), specifically the Castor oil plant, Ricinus communis, pure and additions of the vermiculite in phase dispersed in different percentage within a range from 0% to 20%, mass replacement. From the information acquired, were defined the parameters for production of bodies of test, plates obtained through controlled expansion, with the final volume fixed. Initially, the plates were subjected to thermal performance tests and evaluated the temperature profiles, to later be extracted samples duly prepared in accordance with the conditions required for each test. Was proceeded then the measurement of the coefficient of thermal conductivity, volumetric capacity heat and thermal diffusivity. The findings values were compared with the results obtained in the tests of thermal performance, contributing to validation of the same. Ultimately, it was investigated the influence that changes in physical-chemical structure of the material had exerted on the variation of thermophysical quantities through gas pycnometry, scanning electron microscopy (SEM) combined with energy dispersive X-ray fluorescence spectroscopy (EDXRF), infrared spectroscopy using Fourier transform (FTIR), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). Based on the results obtained was possible to demonstrate that all load percentage analyzed promoted an increase in the potential expansion (PE) of the resin. In production of the plates, the composites with density near at the free expansion presented high contraction during the cure, being the of higher density adopted as definitive standard. In the thermal performance tests, the heating and cooling curves of the different composites had presented symmetry and values very close for lines of the temperature. The results obtained for the thermophysical properties of composites, showed little difference in respect of pure foam. The percentage of open pores and irregularities in the morphology of the composites were proportionate to the increment of vermiculite. In the interaction between the matrix and dispersed phase, there were no chemical transformations in the region of interface and new compounds were not generated. The composites of PUR-NOP and vermiculite presented thermal insulating properties near the foam pure and percentage significantly less plastic in its composition, to the formulation with 10% of load

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In the execution of civil engineering works, either by wasting during the coating of wall or demolition of gypsum walls, the generation of the gypsum waste involves serious environmental concerns. These concerns are increased by the high demand of this raw material in the sector and by the difficulties of proper disposal byproduct generated. In the search for alternatives to minimize this problem, many research works are being conducted, giving emphasis in using gypsum waste as fillers in composites materials in order to improve the acoustic, thermal and mechanical performances. Through empirical testing, it was observed that the crystallization water contained in the residue (CaSO4.2H2O) could act like primary agent in the expanding of the polyurethane foam. Considering that polyurethane produced from vegetable oils are biodegradable synthetic polymers and that are admittedly to represent an alternative to petrochemical synthetic polyurethane, this research consist an analysis of the thermal behavior of a composite whose matrix obtained from a resin derived from the expansive castor oil seed, with loads of 4%, 8%, 12% and 16% of gypsum waste replacing to the polyol prepolymer blend. Contributors to this analysis: a characterization of the raw material through analysis of spectroscopy by Fourier transform infrared (FTIR), chemical analysis by X-Ray Fluorescence (XRF) and mineralogical analysis by X Ray Diffraction (XRD), complemented by thermo gravimetric analysis (TGA). In order to evaluate the thermo physical properties and thermal behavior of the composites manufactured in die closed with expansion contained, were also carried tests to determine the percentage of open pore volume using a gas pycnometer, scanning electronic microscopy (SEM), in addition to testing of flammability and the resistance to contact with hot surfaces. Through the analysis of the results, it appears that it is possible to produce a new material, which few changes in their thermo physical properties and thermal performance, promotes significant changes and attractive to the environment

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The use of composite materials and alternative is being increased every day, as it becomes more widespread awareness that the use of renewable and not harmful to the environment is part of a new environmentally friendly model. Since its waste (primarily fiberglass) can not be easily recycled by the difficulty that still exists in this process, since they have two phases mixed, a polymeric matrix thermoset difficult to recycle because it is infusible and phase of fiber reinforcements. Thermoset matrix composites like Polyester + fiberglass pose a threat due to excessive discharge. Aiming to minimize this problem, aimed to reuse the composite Polyester + fiber glass, through the wastes obtained by the grinding of knifes and balls. These residues were incorporated into the new composite Polyester/Fiberglass for hot compression mold and compared tribological to composites with filler CaCO3, generally used as filler, targeting a partial replacement of CaCO3 by such waste. The composites were characterized by thermal analysis (TGA, DSC and DMA), by the surface integrity (roughness determination, contact angle and surface energy), mechanical properties (hardness) and tribological tests (wear and coefficient of dynamic friction) in order to evaluate the effect of loads and characterize these materials for applications that can take, in the tribological point of view since waste Polyester + fiberglass has great potential for replacement of CaCO3

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

There is no consensus in the literature on the best renal replacement therapy (RRT) in acute kidney injury (AKI), with both hemodialysis (HD) and peritoneal dialysis (PD) being used as AKI therapy. However, there are concerns about the inadequacy of PD as well as about the intermittency of HD complicated by hemodynamic instability. Recently, continuous replacement renal therapy (CRRT) have become the most commonly used dialysis method for AKI around the world. A prospective randomized controlled trial was performed to compare the effect of high volume peritoneal dialysis (HVPD) with daily hemodialysis (DHD) on AKI patient survival. A total of 120 patients with acute tubular necrosis (ATN) were assigned to HVPD or DHD in a tertiary-care university hospital. The primary end points were hospital survival rate and renal function recovery, with metabolic control as the secondary end point. Sixty patients were treated with HVPD and 60 with DHD. The HVPD and DHD groups were similar for age ( 64.2 +/- 19.8 and 62.5 +/- 21.2 years), gender ( male: 72 and 66%), sepsis ( 42 and 47%), hemodynamic instability ( 61 and 63%), severity of AKI ( Acute Tubular Necrosis-Index Specific Score (ATN-ISS): 0.68 +/- 0.2 and 0.66 +/- 0.2), Acute Physiology, Age, and Chronic Health Evaluation Score (APACHE II) (26.9 +/- 8.9 and 24.1 +/- 8.2), pre-dialysis BUN (116.4 +/- 33.6 and 112.6 +/- 36.8mg per 100 ml), and creatinine ( 5.8 +/- 1.9 and 5.9 +/- 1.4 mg per 100 ml). Weekly delivered Kt/V was 3.6 +/- 0.6 in HVPD and 4.7 +/- 0.6 in DHD ( P<0.01). Metabolic control, mortality rate ( 58 and 53%), and renal function recovery ( 28 and 26%) were similar in both groups, whereas HVPD was associated with a significantly shorter time to the recovery of renal function. In conclusion, HVPD and DHD can be considered as alternative forms of RRT in AKI.