Aplicação do Índice Relaçáo Declividade-Extensão - RDE Na Bacia do Rio do Peixe (SP) para Detecção de Deformações Neotectô nicas

This paper presents the identification of tectonic deformation through the application of the stream-gradient index (slope x length) method in the Rio do Peixe hydrographic basin, located in western State of Sã o Paulo. The main principle used is that river valleys are the best tools for this type of analysis because of their fast adjustment to even the most gentle crustal deformations. This type of analysis for structural studies is extremely useful in the western region of the State of São Paulo, where deep chemical weathering results in a thick regolith and scarce outcrops. The stream length index is the ratio of the altimetric amplitude of each drainage and the natural logarithm of its length. The value obtained is plotted on maps at the median point of each drainage, allowing the drawings of lines with the same values (isodefs). Three anomalies (A, B and C) were identified along the Rio do Peixe valley representing uplift sectors indicated by the formation and distribution of Upper Quaternary deposits in terraces and modern fluvial plains and alluvial fans. In correlation with known tectonic data for this region it is possible to attribute the A and B anomalies to the Ribeirão Preto and Presidente Prudente crustal sutures, respectively. The smaller C anomaly needs further field investigation, but it could be associated with the Três Lagoas crustal suture. It must be emphasised that these sutures are inherited from the Precambrian Basement which had a strong influence on the Phanerozoic evolution in the whole sedimentary and volcanic stratigraphic pile of the Paraná Basin and on the dominant structural lineaments directions developed therein .The A, Band C anomalies are suggestive of renewed uplift as a result of neotectonic action in modern times.

Method for estimating railroad track settlements due to dynamic traffic loads

This paper is the result of real-scale physical modeling study designed to simulate the load-deformation characteristics of railroad foundation systems that include the railroad ties, the ballast, and the sub-base layers of a railroad embankment. The study presents comparisons of the application of dynamic loads of 100kN on the rails, and the resulting deformations during a 500,000 cycle testing period for three rail support systems; wood, concrete and steel. The results show that the deformation curve has an exponential shape, with the larger portion of the deformation occurring during the first 50,000 load cycles followed by a tendency to stabilize between 100,000 to 500,000 cycles. These results indicate that the critical phase of deformations of a new railroad is within the first 50,000 cycles of loading, and after that, it slowly attenuates as it approaches a stable value. The paper also presents empirically derived formulations for the estimation of the deformations of the rail supports as a result of rail traffic.

Role of transitional levels in Np237 (γ,f): Perspectives for studying highly deformed systems

The transition levels at the top of the two Np237 fission barriers were obtained for the first time by means of the so-called semimicroscopic combined method, which we have developed and implemented. To overcome the difficulties in dealing with large nuclear deformations, we used our developed BARRIER code, which calculates single-particle spectra in a deformed Woods-Saxon potential using a coordinate system based on Cassini ovaloids as nuclear shape parametrization. The results enabled us to describe the experimentally observed near-barrier photofission cross-section structures for Np237, as well as a subbarrier shelf, the latter being consistently interpreted in terms of the accumulation of levels at the top of the inner and outer double fission barrier of Np237. © 2006 The American Physical Society.

Grãos ultrafinos por laminação a morno e recozimento intercrítico

Grain refinement of low carbon steel via the warm deformation of martensite during torsion testing was investigated. At the beginning of straining, laths with high dislocation density were observed. After large deformations, a ferrite matrix with grain size close to 1μm and dispersed cementite particles were attained.

Detecção de prováveis deformações neotectônicas no Vale do Rio do Peixe, Região Ocidental Paulista, mediante aplicaçao de Índices RDE (Relac̈ão Declividade-Extensão) em segmentos de drenagem

Running water is one of the most important of all the physical processes which fashion the landscape, allowing gravity to operate along the valley floors. Besides this, the streams show a fast adjustment to the crustal deformations, even to the most gentle ones. This geologic behavior turns them a potential tool for neotectonic studies, specially the analysis of morphotnetric parameters associated with hydraulic gradient and discharge, this second factor being directly proportional to the extension of the streams. Both elements, gradient and stream length, can be combined in the SL index. The purpose of this paper is to show the RDE index application in the neotectonics analysis of the Rio do Peixe hydrographic basin and to compare the obtained values with the geologic basement incised by the streams. This basement encompasses Cretaceous sedimentary rocks of post-Serra Oeral Formation magmatism (Caiuá and Bauru groups) and Quaternary deposits that include chiefly recent alluvial plains and some Pleistocene terrace deposits. In the final part of this paper, an attempt is made in order to correlate the RDE results and the neotectonic framework admitted to this portion of the São Paulo State territory, as well as with field geologic, seismologic and paleoseismologic known elements. The results indicate the presence of two groups of anomalies: The first set corresponds to the Marília-Exaporã Plateau border, and the second one, located in the central portion of the hydrographic basin, is correlated to the Presidente Prudente seimogenic zone.

The influence of the mixing time in the rheological behavior of cement pastes

Rheology has the purpose to study the flux and deformation of materials when submitted to some tension or outer mechanical solicitation. In practice, the effective scientific field broached by rheology is restricted only to the study of homogeneous fluids behavior, in which are included eminent liquids, particles suspensions, and emulsions. The viscosity (η) and the yield stress (τ 0) are the two basic values that define the fluids' behavior. The first one is the proportionality constant that relates the shear rate (γ) with the shear stress (τ) applied, while the second indicates the minimal tension for the flowage beginning. The fluids that obey the Newton's relation - Newtonians fluids - display the constant viscosity and the null yield stress. It's the case of diluted suspensions and grate amount of the pure liquids (water, acetone, alcohol, etc.) in which the viscosity is an intrinsic characteristic that depends on temperature and, in a less significant way, pressure. The suspension, titled Cement Paste, is defined as being a mixture of water and cement with, or without, a superplasticizer additive. The cement paste has a non-Newtonian fluid behavior (pseudoplastic), showing a viscosity that varies in accord to the applied shear stress and significant deformations are obtained from a delimited yield stress. In some cases, systems can also manifest the influence of chemical additives used to modify the interactions fluid/particles, besides the introduced modifications by the presence of incorporated air. To the cement paste the rheometric rehearsals were made using the rheometer R/S Brookfield that controls shear stress and shear rate in accord to the rheological model of Herschel-Bulkley that seems to better adapt to this kind of suspension's behavior. This paper shows the results of rheometrical rehearsals on the cement paste that were produced with cements HOLCIM MC-20 RS and CPV-ARI RS with the addition of superplasticizer additives based of napthaline and polycarboxilate, with and without a constant agitation of the mixture. The obtainment of dosages of superplasticizer additives, as well as the water/cement ratio, at the cement at the fluidify rate determination, was done in a total of 12 different mixtures. It's observed that the rheological parameters seem to vary according to the cement type, the superplasticizer type, and the methodology applied at the fluidity rate determination.

Análise morfotectônica da Bacia do rio Santo anastácio, sp, através de parâmetros fluviomorfométricos e de registros paleossísmicos

Fluvial morphometry is method of great value regarding neotectonic analysis of extensive areas because streams, besides representing one of the main agents in the relief modeling, quickly adjust their thalwegs to even the most gentle crustal deformations. The purpose of this paper is to present the application of some morphometric techniques in the Santo Anastácio River hydrographic basin in order to identify recent tectonic deformations. Additionally, we show liquefaction structures identified in the basin and interpreted here as seismites linked to ancient earthquakes (magnitudes greater than 5). The morphometric survey includes longitudinal stream profile analysis, RDE (declivity versus stream length) index application, and the sinuosity study of the Santo Anastácio River channel. Geologic substrate comprises Cretaceous siliciclastic rocks of the Caiuá and Bauru groups, locally covered by Cenozoic sediments (alluvial plains, terrace deposits, colluvial aprons, as well as in situ regoliths). Considering that liquefaction structures affect dark clay layers of 32.340±320 year BP age (14C dating), a lower age limit for the ancient earthquake is triggered in that region. The authors believe that neotectonic understanding of the Western São Paulo State Plateau is important to the geologic and geomorphologic evolution of that landscape and to the consequent territorial planning and occupation.

The non-ideal problem behavior using a dynamic vibration absorber with nonlinear essential stiffness and timedependent damping properties

The purpose of this study is to develop a dynamic vibration absorber using viscoelastic material with nonlinear essential stiffness and time-dependent damping properties for a non-ideal vibrating system with Sommerfeld effect, resonance capture, and jump phenomenon. The absorber is a mass-bar subsystem that consists of a viscoelastic bar with memory attached to mass, in which the internal dissipative forces depend on current, deformations, and its operational frequency varies with limited temperature. The non-ideal vibrating system consists of a linear (nonlinear) oscillator (plane frame structure) under excitation, via spring connector, of a DC-motor with limited power supply. A viscoelastic dynamic absorber modeled with elastic stiffness essentially nonlinearities was developed to further reduce the Sommerfeld effect and the response of the structure. The numerical results show the performance of the absorber on the non-ideal system response through the resonance curves, time histories, and Poincarésections. Furthermore, the structure responses using the viscoelastic damper with and without memory were studied. © IMechE 2012.

On the influence of the mode-shapes of a marine propulsion shafting system on the prediction of torsional stresses

Torsional vibration predictions and measurements of a marine propulsion system, which has both damping and a highly flexible coupling, are presented in this paper. Using the conventional approach to stress prediction in the shafting system, the numerical predictions and the experimental torsional vibration stress curves in some parts of the shafting system are found to be quite different. The free torsional vibration characteristics and forced torsional vibration response of the system are analyzed in detail to investigate this phenomenon. It is found that the second to fourth natural modes of the shafting system have significant local deformation. This results in large torsional resonant responses in different sections of the system corresponding to different engine speeds. The results show that when there is significant local deformation in the shafting system for different modes, then multi-point measurements should be made, rather than the conventional method of using a single measurement at the free end of the shaft, to obtain the full torsional vibration characteristics of the shafting system.

Notes on the pure spinor b ghost

In this work, a particular BRST-exact class of deformations of the b ghost in the non-minimal pure spinor formalism is investigated and the impact of this construction in the N= 2 ĉ = 3 topological string algebra is analysed. As an example, a subclass of deformations is explicitly shown, where the U (1) current appears in a conventional form, involving only the ghost number currents. Furthermore, a c ghost like composite field is introduced, but with an unusual construction. © 2013 SISSA, Trieste, Italy.

Comparative analysis of strut-and-tie models using Smooth Evolutionary Structural Optimization

The strut-and-tie models are widely used in certain types of structural elements in reinforced concrete and in regions with complexity of the stress state, called regions D, where the distribution of deformations in the cross section is not linear. This paper introduces a numerical technique to determine the strut-and-tie models using a variant of the classical Evolutionary Structural Optimization, which is called Smooth Evolutionary Structural Optimization. The basic idea of this technique is to identify the numerical flow of stresses generated in the structure, setting out in more technical and rational members of strut-and-tie, and to quantify their value for future structural design. This paper presents an index performance based on the evolutionary topology optimization method for automatically generating optimal strut-and-tie models in reinforced concrete structures with stress constraints. In the proposed approach, the element with the lowest Von Mises stress is calculated for element removal, while a performance index is used to monitor the evolutionary optimization process. Thus, a comparative analysis of the strut-and-tie models for beams is proposed with the presentation of examples from the literature that demonstrates the efficiency of this formulation. © 2013 Elsevier Ltd.

Campo de velocidade para as estações da RBMC e do IGS localizados na placa Sul-Americana: estimativa a partir do processamento de dados GPS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação das metodologias de derterminação das áreas de contato e deformações elásticas de pneus agrícolas em função das pressões de inflação e cargas radiais

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

A influência do esgoto doméstico como fluido de saturação no colapso de um solo arenoso

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reologia de vinhos tintos secos produzidos no Sul do Brasil

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE