Desenvolvimento de nanopartículas de quitosana para adminstração nasal de zidovudina

Zidovudine (AZT) is the drug most commonly used in AIDS treatment, isolated or in combination with other antiretroviral agents, but it has certain limitations due to its therapeutic dose-dependent haematological toxicity. In addition, it has low oral bioavailability, since it undergoes pre-systemic metabolism. The nasal route has been used as an alternative route for drug administration, because it can promote its direct absorption to blood circulation, avoiding hepatic metabolism. However, this route presents as a factor limiting the mucociliary clearance mechanisms that remove quickly the formulation of the nasal cavity. To prolong the residence time of formulations, in this direction, has been proposed the development of mucoadhesive systems. Among the various existing systems, the use of chitosan (QS), as mucoadhesive polymer, has been widely exploited in the preparation of nanoparticles (NPs). The objective of this study was to develop and characterize QS’s NPs for intranasal administration of AZT. For both NPs have been developed by ionic crosslinking of QS with sodium tripolyphosphate (TPP). These NPs were characterized by studies of particle size distribution, zeta potential, morphology, mucoadhesion tests, assessing the ability of encapsulation of the drug and permeation profile of AZT. The evaluation of AZT in the NPs was determined by UV-Vis spectroscopy. Mucoadhesion measures were made using a texture analyzer, using a mucin disk and porcine mucous membrane , and permeation assay were conducted using porcine nasal mucous membrane adapted to the Franz cell. These results suggest that the systems in hand have great potential for nasal AZT administration

Estudo do potencial de associações de ZnO com os produtos naturais ácido cafeico e ferúlico como filtros solares híbridos: [recurso eletrônico]

In this work were studied associations of ZnO with the natural products caffeic and feluric acids. Two preparation methods were used, that is, the sol-gel and a reflux procedure. In the sol-gel method, ZnO is produced by the basics hydrolysis of precursors in the presence of the organic filters (caffeic and feluric acids), which results in 30 nm (or less) ZnO particles with the organic filters (in dissociated form) bonded to the surface of ZnO. In the reflux method, a dispersion of ZnO in a water/ethanol mixture was kept under reflux (50oC/4h) in the presence of the organic acids. The ZnO particles used in the reflux method have a higher diameter than sol-gel ZnO particles, but the prepared associated product ZnO/Organic acids were similar. Despite of the difference in relation to crystallinity between the products, the preparation methods resulted in analogous associations with respect to the interaction of the organic filters with the ZnO surface. The caffeic/ZnO associations presented low photostability, which lead to the degradation of the organic filter. The other associations (feluric acid/ZnO) presented satisfactory results. The FT-IR spectroscopy confirmed the formation of the association, and the nature of the bond formed compared with the Zn-O bond in Zn2+/Felutic acid complexes. The isolated organic and inorganic filters, along with the associations were analyzed by diffuse reflectance spectroscopy and Uv-vis spectroscopy. The absorption edges and the critical wavelengths were analyzed and the effects of Zn-O bonds in feluric acid/ZnO associations described as a function of the relative position of the π/π* system of the organic filter. Finally the performance of the hybrid filters were investigated in terms of the absorption of UVA and UVB radiations, with the UVA/UVB ratio, an efficiency parameter largely used in the description of solar filters, sunscreen and suncare products

Efeitos fotocrômico e termocrômico em ormosils dopados com azobenzenos

The sol-gel process and the wide variety of alkoxides commercially available have facilitated the processing of various Organic-Inorganic Hybrid Materials. In general, the hybrids are excellents matrix to incorporate organic or inorganic dopants that presents photochromic, thermochromic, and halochromic effects and in some cases photorefractive effects. The GPTS-TEOS hybrid matrix when deposited in the form of film is very resistant, adherent, has excellent transparency in visible region and allows to be doped with various azo-dye and metal salts of unusual oxidation states. One of the main characteristics of the azo-dyes when immersed in some hybrid matrix , is the capacity to isomerizes through group Azo (-N = N-) would can be commutated between the Cis (Z) and Trans (E) configurations by means of light or heat. Our goal was through the sol-gel process to prepare hybrid films of GPTS-TEOS doped with azo-dyes Methyl Red and Disperse Red 1, and characterize them optically. The characterizations are performed using techniques of UV / Vis spectroscopy, to identify changes in the absorption band of azo-dyes in the presence of optical pumping, (photochromic effects), in function of temperature (thermochromic effect). These properties are of wide scientific and technological interest because they will contribute to the confection Smart Windows (windows sensible to light), temperature sensors monitored optically and also in the recording of amplitude and phase diffraction gratings

Complexos heterobilantanídicos luminescentes sob excitação UV e raios X

Pós-graduação em Química - IQ

Preparação e Modificação Química de Nanoestruturas de Octa(aminopropil) silsesquioxano para Aplicações Analíticas

Pós-graduação em Ciência dos Materiais - FEIS

Rietveld refinement, cluster modelling, growth mechanism and photoluminescence properties of CaWO4: Eu3+ microcrystals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characteristics of PbO-BiO1.5-GaO1.5 glasses melted in SnO2 crucibles

PbO-BiO 1.5-GaO 1.5-based glasses are good candidates for optical applications, because of some of their interesting characteristics, such as high refraction indices and high transmission in the ultraviolet (UV), visible (VIS), and infrared (IR) regions. A limited stage in the processing of these glasses is the corrosion that is caused by the melt in all currently used conventional crucibles, such as noble metals (platinum or gold) and Al 2O 3. The absorption of crucible material by the glass composition may reduce the transmission level, the cutoff in the UV-VIS, and IR regions, and the thermal stability. In this study, a SnO 2 crucible has been tested for PbO-BiO 1.5-GaO 1.5 molten glass. Optical and thermal analyses show, in some cases, advantages over the use of platinum and Al 2O 3 crucibles. A visible cutoff value of 474 nm has been measured, and a longer melting time (850°C for 4 h) results in a significant reduction of the O-H absorption band at 3.2 μm.

Preparação e caracterização óptica de filmes híbridos dopados com o azocorante Disperse Red 1

The Sol-gel process has facilitated the processing of Organic-Inorganic Hybrid Materials with several scientific applications and technologies. The hybrid combine the advantages of the Sol-gel process with specific characteristics of organic polymers, allowing processing of thin films without fractures or fissures. The incorporation of azo dyes in polymer matrices has been widely used in the investigation of optical properties. The azo dye Disperse Red (DR1) presents optical alterations when exposed to visible or ultraviolet light. The alterations occur due to transitions of their isomers, trans and cis, caused by photoisomerization, due to electronic transitions of azo group (-N=N-), presenting photochromic and/or photorefractive effects. The hybrid system used in this work is the precursor 3- Glycidoxypropyl-Trimethoxi-silane (GPTS), the Tetraethylorthosilicate (TEOS) and DR1 as a dopant. The characterizations were performed using absorption spectroscopy UV-Vis which allowed the identification of the absorption bands and its variations when the samples were treated thermally and/or illuminated by ultraviolet light

Caracterização de Filmes a-C:H:Cl e a-C:H:Si:Cl produzidos por deposição à vapor químico assistido por plasma (PECVD) e deposição e implantação iônica por imersão em plasma (PIIID)

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Síntese e caracterização de monômeros azo-carbonatos para a preparação de poli(azo-carbonato)s e poli)azo-uretana)s

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Metalosupramoléculas discretas e Metal Organic Frameworks (MOFs) baseados em íons lantanídeos: design, síntese, caracterização e propriedades

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Polymerization kinetics and reactivity of alternative initiators systems for use in light-activated dental resins

Objectives. The purpose of this study was to evaluate the reactivity and polymerization kinetics behavior of a model dental adhesive resin with water-soluble initiator systems. Methods. A monomer blend based on Bis-GMA, TEGDMA and HEMA was used as a model dental adhesive resin, which was polymerized using a thioxanthone type (QTX) as a photoinitiator. Binary and ternary photoinitiator systems were formulated using 1 mol% of each initiator. The co-initiators used in this study were ethyl 4-dimethylaminobenzoate (EDAB), diphenyliodonium hexafluorophosphate (DPIHFP), 1,3-diethyl-2-thiobarbituric acid (BARB), p-toluenesulfinic acid and sodium salt hydrate (SULF). Absorption spectra of the initiators were measured using a UV-Vis spectrophotometer, and the photon absorption energy (PAE) was calculated. The binary system camphorquinone (CQ)/amine was used as a reference group (control). Twelve groups were tested in triplicate. Fourier-transform infrared spectroscopy (FTIR) was used to investigate the polymerization reaction during the photoactivation period to obtain the degree of conversion (DC) and maximum polymerization rate (R-p(max)) profile of the model resin. Results. In the analyzed absorption profiles, the absorption spectrum of QTX is almost entirely localized in the UV region, whereas that of CQ is in the visible range. With respect to binary systems, CQ + EDAB exhibited higher DC and R-p(max) values. In formulations that contained ternary initiator systems, the group CQ + QTX + EDAB was the only one of the investigated experimental groups that exhibited an R-p(max) value greater than that of CQ + EDAB. The groups QTX + EDAB + DPIHFP and QTX + DPIHFP + SULF exhibited values similar to those of CQ + EDAB with respect to the final DC; however, they also exhibited lower reactivity. Significance. Water-soluble initiator systems should be considered as alternatives to the widely used CQ/amine system in dentin adhesive formulations. (C) 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Excited-state dynamics of meso-tetrakis(sulfonatophenyl) porphyrin J-aggregates

The excited-state dynamics of free-base meso-tetrakis(sulfonatophenyl) porphyrin J-aggregates obtained by the Z-scan technique in femto- and picosecond time scales, along with UV-Vis spectroscopy and flash photolysis is reported. Besides obtaining the S-1 state lifetime, the discrimination between internal conversion and intersystem crossing nonradiative processes from that state was also possible, and their rates and respective quantum yields were found. The aggregates present reverse saturable absorption at 532 nm for both singlet and triplet excited states. The data shown is important for several applications such as optical limiting, photodynamic therapy and others. (C) 2011 Elsevier B.V. All rights reserved.

Langmuir and Langmuir-Blodgett films of a quinoline-fluorene based copolymer

The fabrication of Langmuir-Blodgett (LB) films of synthetic polymers allows the control of molecular architecture in order to optimize physical properties. In this paper, the surface chemistry of a quinoline-fluorene based copolymer spread on the air-water interface is investigated. Surface pressure-area isotherms as well as Polarization-Modulation Infrared Reflection-Absorption Spectroscopy (PM-IRRAS) were employed to characterize the films, which could be transferred to solid supports by the LB technique. Atomic force microscopy as well as UV-Vis and fluorescence spectroscopies have shown a regular deposition of the polymers, and the luminescence properties could be controlled with the number of layers deposited on the solid support. As a result, the photoluminescence of the LB films was considerably higher than that observed for the spin coated film, and the maximum emission peak was shifted to higher energies, which is attributed to the molecular-level interactions within the layer-ordered structure of the LB film. The luminescence response would possibly be tuned to approach the highest level, which allows the films to be employed in future applications in efficient optical devices such as organic light-emitting diodes (OLEDs). (C) 2011 Elsevier B.V. All rights reserved.

Latent track radius of PTFE irradiated with high energy ion beam

PTFE foils were irradiated with different ion beams (Xe, Au and U) with energies up to 1.5 GeV and fluences between 1 x 10(8) and 1 x 10(13) ions/cm(2) at room temperature. The induced modifications in the polymer were analyzed by FTIR, UV-Vis spectroscopy, and XRD. In the FTIR spectra, the CF2 degradation accompanied by the formation of CF3 terminal and side groups were observed. In the UV-Vis spectra, the observed increase in the absorption at UV wavelengths is an indication of polymer carbonization. From XRD, the amorphization of the material was evidenced by the decrease in the intensity of the main diffraction peak. An exponential fit of the intensity of the IR absorption peaks resulted in the following values: 2.9 +/- 0.8; 4.5 +/- 0.9 and 5.6 +/- 0.8 nm for the latent track radius after irradiation with Xe, Au and U beams, respectively. (C) 2011 Elsevier B.V. All rights reserved.